Panel/combination instrument-- panel

3 Fixing clamp
4 Fixing clasp

5. Disassemble safety airbag assembly at the side of

driver [67010011] (Referring to page 261)

6. Disassemble steering wheel assembly [67010001]

(referring to page 194)

7. Disassemble Combination instrument cover

[68000077]

(a) Disassemble fixing clamp.

(b) Use screw driver to unclench three fixing clamps and four

fixing clasps, then disassemble Combination instrument.

Hint: before using screw driver, it is necessary to wrap

its needled top with adhesive tape.

8. Disassemble Combination instrument assembly

[67000081]

(a) Disassemble A screw.

(b) Liking that shown in figure, unclench two fixing clamps.

(c) Disassemble the joint, then disassemble Combination in-

strument assembly.

9. Disassemble panel left ventilation hole assembly

[68010010]

Use disassembling tool for trim tape to disassemble panel left

ventilation hole assembly.

Hint: before using screw driver, it is necessary to wrap its

needled top with adhesive tape.

10. Disassemble panel right ventilation hole assembly

[68010011]

11. Disassemble front ashtray

12. Disassemble shift organization trim board assem-

bly [68000076]

(a) Use screw driver to unclench six fixing clamps.

Hint: before using screw driver, it is necessary to wrap

its needled top with adhesive tape.

(b) Disassemble the joint, then disassemble shift organization

trimmain board.

 341 

4 Fixing clasp

6 Fixing clamp

Panel/combination instrument-- panel

<F>

8 Fixing
clamp

8 Fixing
clamp

< >

Fixing clamp
2 Fixing clasp

4 Fixing clamp
4 Fixing clasp

13. Disassemble air conditioner control panel assem-

bly [67000148]

(a) Use screw driver to unclench four fixing clamps and four

fixing clasps, then disassemble air conditioner control panel

assembly.

Hint: before using screw driver, it is necessary to wrap

its needled top with adhesive tape.

(b) Disassemble the joint.

14. Disassemble CD machine assembly [67000126]

(a) Disassemble two E self tapping screws and two F bolts.

(b) Use screw driver to unclench eight fixing clamps, then dis-

assemble DVD assembly and panel central ventilation hole

assembly.

Hint: before using screw driver, it is necessary to wrap

its needled top with adhesive tape.

(c) Disconnect panel central ventilation hole assembly.

15. Disassmble lower panel right storage box assem-

bly [68100008]

(a) Disassemble A screw and gas spring on storage box.

(b) Bend upper part of storage box to release gas spring.

(c) Pull put storage box upwards.

16. Disassemble right front pillar inner trim board as-

sembly [68010017]

(a) Unclench two fixing clamps.

(b) Pull out right front pole inner trim board upwards.

17. Disassemble left front pole inner trim board assem-

bly [68010014]

18. Disassemble the joint of safety airbag assembly at

the side of passenger (referring to page 263)

 342 

Panel/combination instrument-- panel

6 Fixing clamp

5 Fixing clasp

19. Disassemble upper panel assembly [68010004]

(a) Disassemble D bolt and two A screws.

(b) Use disassembling tool for trim tape to unclench six fixing clamps.

(c) Disassemble upper panel assembly.

20. Disassemble upper/lower trim board of steering column [64000128/64000129]

21. Disassemble left combination switch assembly [67000078] (referring to page 298)

22. Disassemble right combination switch assembly [64000079] (referring to page 302)

23. Disassemble gas spring

Unclench fixing clamp, then disassemble gas spring.

 343 

24. Disassemble evaporator ventilation pipe assembly

[67000149]

Disassemble four fixing clamps and evaporator ventilation pipe

assembly.

gas

spring

Panel/combination instrument-- panel

L

4 Fixing
clasp

3  Fixing
clasp

Fixing
clamp

25. Disassemble parking brake hole cover.

Use screw driver to unclench four fixing clamps, then disas-

semble parking brake hole cover.

Hint: before using screw driver, it is necessary to wrap its

needled top with adhesive tape.

26. Disassemble auxiliary panel assembly [68010002]

(a) Disassemble two L bolts, two C bolts and auxiliary panel

assembly.

27. Disassemble right front door pedal trim board

[68010021]

Use screw driver to unclench three fixing clamps, then disas-

semble right front door pedal trim board.

Hint: before using screw driver, it is necessary to wrap its

needled top with adhesive tape.

28. Disassemble left front door pedal trim board

[68010020]

29. Disassemble lower inner trim board of right de-

fender [68010016]

(a) Disassemble plastic nuts of lower inner trim board of right

defender.

(b) Unclench fixing clamp, then disassemble lower inner trim

board of right defender liking that shown in figure.

30. Disassemble lower inner trim board of left defender

[68010015]

31. Disassemble connecting board at the middle of

panel [68010006]

(a) Use screw driver to unclench four fixing clamps, then open

the connecting board at the middle of panel.

Hint: before using screw driver, it is necessary to wrap

its needled top with adhesive tape.

(b) Disassemble connecting board at the middle of panel.

 344