|
|
|
STARTING AND DRIVING * Option/accessory. 475 Calibrating the compass* The globe is divided into 15 magnetic zones. To calibrate the compass: 1. Stop the vehicle in a large, open area away from steel constructions and high-voltage 2. Start the engine and switch off all electrical equipment (climate system, wipers, etc.) and Calibration may fail or not even be initiated if 3. Hold the button on the bottom of the rear- view mirror pressed for about 3 seconds 15 14 13 12 11 9 8 7 6 5 4 3 2 1 10 Magnetic zones. 4. Press the button on the underside of the mirror repeatedly until the desired magnetic 1–15 ) appears (see the map of mag- netic zones). 5. Wait until the display again shows C , or press and hold the button on the underside C is displayed. 6. Drive slowly in a circle at a speed of no more than 10 km/h (6 mph) until a compass direc- 7. Vehicles with heated windshields*: If C is shown in the display when the windshield 8. Repeat the above procedure as needed. Related information • • |