Toyota Camry (2024 year). Manual in english

129

2. Instrument cluster

Instrum

nt clus

ter

CAMRY_U

Select

on the multi-information display (



P. 117) and then

◆

Enabling/disabling the head-up display

Press

to enable/disable the head-up display.

◆

Changing the head-up display settings

Press and hold

to change the following settings:

■

Eco Driving Indicator/Tachometer

Select to display Eco Driving Indicator/tachometer/no content.

■

Display brightness/position

Select to adjust the brightness and position of the head-up display.

■

Display content

Select to enable/disable the following items:

• Route guidance to destination (if equipped)
• Driving assist system status
• Compass (if equipped)

■

Display angle

Select to adjust the angle of the head-up display.

Using the head-up display

130

2. Instrument cluster

CAMRY_U

◆

Driving assist system status display

Displays the operational status of the following systems:

• Dynamic radar cruise control with full-speed range (



P. 290)

• LTA (Lane Tracing Assist) (



P. 270)

• RSA (Road Sign Assist) (if equipped) (



P. 285)

• Intuitive parking assist (if equipped) (



P. 336)

◆

Navigation system-linked display area (if equipped)

Displays the following items, which are linked to the navigation sys-
tem:

■

Street name

When the navigation system is performing route guidance, the
name of the next street will be displayed on the top of the display
area.

■

Route guidance to destination

Displayed when the navigation system is performing route guid-
ance. When approaching an intersection, an arrow will be displayed
to indicate the suggested direction of travel.

■

Compass

Displays the direction of travel.

Driving assist system status/navigation system-linked display
area (if equipped)

131

2. Instrument cluster

Instrum

nt clus

ter

CAMRY_U

■

Eco Driving Indicator

Eco Driving Indicator Zone
Display

Eco driving ratio based on
acceleration

Zone of Eco driving

Displayed content is the same
as that displayed on the multi-
information display (Eco Driving
Indicator). For details, refer to
P. 126.

■

Tachometer

Displays the engine speed in revolutions per minute.

Displays the following items in the appropriate situation:

■

Warning/Message

●

Alert from the LTA (Lane Tracing Assist)

●

Dynamic radar cruise control with full-speed range

●

Brake Override System/Drive-Start Control

●

message

Displayed when a suggestion/advice pop-up display is displayed on the
multi-information display. (



P. 125)

●

message

Displayed when a warning message is displayed on the multi-informa-
tion display. (



P. 538)

●

Outside temperature

Displayed in the following situations:

• When the engine switch is turned to IGNITION ON mode
• When the low outside temperature indicator is flashing

Displayed content is the same as that displayed on the multi-information
display. For details, refer to the explanation of the outside temperature
display on the multi-information display. (



P. 94)

■

Hands-free system status

Displayed when the hands-free system is operated.

■

Audio system operation status

Displayed when the audio system is operated.

Eco Driving Indicator/Tachometer

Information display area

132

2. Instrument cluster

CAMRY_U

■

Head-up display

The head-up display may seem dark or hard to see when viewed through

sunglasses, especially polarized sunglasses.

Adjust the brightness of the head-up display or remove your sunglasses.

■

Display brightness

The brightness of the head-up display can be adjusted on

of the multi-

information display. Also, it is automatically adjusted according to the ambient

brightness.

■

Enabling/disabling of the head-up display

If the head-up display is disabled, it will remain disabled when the engine

switch is turned off then back to IGNITION ON mode.

■

Street name display (vehicles with a navigation system)

Only street names which are included in the map data will be displayed.

WARNING

■

Before using the head-up display

●

Check that the position and brightness of the head-up display image does

not interfere with safe driving. Incorrect adjustment of the image’s position

or brightness may obstruct the driver’s view and lead to an accident,

resulting in death or serious injury.

●

Do not continuously look at the head-up display while driving as you may

fail to see pedestrians, objects on the road, etc. ahead of the vehicle.

■

Caution for changing settings of the head-up display

As the engine needs to be running while changing the settings of the head-

up display, ensure that the vehicle is parked in a place with adequate venti-

lation. In a closed area such as a garage, exhaust gases including harmful

carbon monoxide (CO) may collect and enter the vehicle. This may lead to

death or a serious health hazard.

133

2. Instrument cluster

Instrum

ent

clus
ter

CAMRY_U

NOTICE

■

To prevent damage to components

■

When changing the settings of the head-up display

To prevent battery discharge, ensure that the engine is running while the

changing the settings of the head-up display.

●

Do not place any drinks near the head-

up display projector. If the projector gets

wet, electrical malfunctions may result.

●

Do not place anything on or put stickers

onto the head-up display projector.

Doing so could interrupt head-up dis-

play indications.

●

Do not touch the inside of the head-up

display projector or thrust sharp edges

or the like into the projector.

Doing so could cause mechanical mal-

functions.

134

2. Instrument cluster

CAMRY_U



Audio (vehicles without Data Communication Module) or Audio
Plus (vehicles without Data Communication Module)

Press the “MENU” button.

Select “Info” on the “Menu”
screen.

If the “History” screen is displayed,
select “Trip Information”.

Fuel consumption information

Fuel consumption information can be displayed on the audio
system screen.

Trip information

135

2. Instrument cluster

Instrum

nt clus

ter

CAMRY_U



Audio (vehicles with Data Communication Module), Audio Plus
(vehicles with Data Communication Module) and Premium Audio

Press the “MENU” button.

Select “Info” on the “Menu”
screen.

Select “ECO” on the “Informa-
tion” screen.

If the “History” screen is displayed,
select “Trip Information”.

Resetting the consumption data

Average vehicle speed since
the engine was started

Elapsed time since the engine
was started

Fuel consumption in the past 15
minutes

Cruising range (



P. 137)

Current fuel consumption

Vehicles without a smart key system:
Average fuel consumption for the past 15 minutes is divided by color
into past averages and averages attained since the engine switch was
last turned to the “ON” position. Use the displayed average fuel con-
sumption as a reference.
Vehicles with a smart key system:
Average fuel consumption for the past 15 minutes is divided by color
into past averages and averages attained since the engine switch was
last turned to IGNITION ON mode. Use the displayed average fuel
consumption as a reference.

This image is an example only.

136

2. Instrument cluster

CAMRY_U



Audio (vehicles without Data Communication Module) or Audio
Plus (vehicles without Data Communication Module)

Press the “MENU” button.

Select “Info” on the “Menu” screen.

If the “Trip Information” screen is displayed, select “History”.



Audio (vehicles with Data Communication Module), Audio Plus
(vehicles with Data Communication Module) and Premium Audio

Press the “MENU” button.

Select “Info” on the “Menu” screen.

Select “ECO” on the “Information” screen.

If the “Trip Information” screen is displayed, select “History”.

Resetting the past record data

Best recorded fuel consumption

Current fuel economy

Previous fuel consumption
record



Audio and Audio Plus

Displays the daily average fuel
consumption. (Instead of the date,
“Trip 1” through “Trip 5” will be dis-
played.)



Premium Audio

Displays the daily average fuel consumption.

Updating the average fuel consumption data

The average fuel consumption history is divided by color into past
averages and the average fuel consumption since the last updated.
Use the displayed average fuel consumption as a reference.

This image is an example only.

History

137

2. Instrument cluster

Instrum

nt clus

ter

CAMRY_U

■

Updating the past record data

Update the average fuel consumption by selecting “Clip” to measure the cur-
rent fuel consumption again.

■

Resetting the data

The fuel consumption data can be deleted by selecting “Clear”.

■

Cruising range

Displays the estimated maximum distance that can be driven with the quan-
tity of fuel remaining.

This distance is computed based on your average fuel consumption.
As a result, the actual distance that can be driven may differ from that dis-
played.

140

CAMRY_U

3-1. Key information

The following keys are provided with the vehicle.



Vehicles without a smart key system

Keys

Operating the wireless remote con-
trol function (



P. 141)

Key number plate



Vehicles with a smart key system

Electronic keys

• Operating the smart key system

(



P. 161)

• Operating the wireless remote

control function (



P. 141)

Mechanical keys

Key number plate

Keys

The keys

141

3-1. Key information

Op
eration

f each

compo

nen

CAMRY_U



Vehicles without a smart key system

Locks all the doors (



P. 148)

Unlocks all the doors (



P. 148)

Pressing the button unlocks the
driver’s door. Pressing the button
again within 3 seconds unlocks the
other doors.

Opens the windows

and the

moon roof

1, 2

(



P. 148)

Opens the trunk (



P. 157)

Sounds the alarm (



P. 143)

: This setting must be customized at your Toyota dealer.

: If equipped



Vehicles with a smart key system

Locks all the doors (



P. 148)

Unlocks all the doors (



P. 148)

Pressing the button unlocks the
driver’s door. Pressing the button
again within 3 seconds unlocks the
other doors.

Opens the windows

and the

moon roof

1, 2

or panoramic

moon roof

1, 2

(



P. 148)

Opens the trunk (



P. 157)

Sounds the alarm (



P. 143)

: This setting must be customized at your Toyota dealer.

: If equipped

Wireless remote control

142

3-1. Key information

CAMRY_U

Releasing

To release the key, press the but-
ton.

Folding

To stow the key, press the button
then fold the key.

To take out the mechanical key,
slide the release lever and take
the key out.

The mechanical key can only be
inserted in one direction, as the
key only has grooves on one side.
If the key cannot be inserted in a
lock cylinder, turn it over and re-
attempt to insert it.

After using the mechanical key, store it in the electronic key. Carry the
mechanical key together with the electronic key. If the electronic key bat-
tery is depleted or the entry function does not operate properly, you will
need the mechanical key. (



P. 559)

Using the key (vehicles without a smart key system)

Using the mechanical key (vehicles with a smart key system)

143

3-1. Key information

Op
eration

f each

compo

nen

CAMRY_U

■

Panic mode



Vehicles without a smart key system



Vehicles with a smart key system

When

is pressed for longer than

about one second, an alarm will sound
intermittently and the vehicle lights will
flash to deter any person from trying to
break into or damage your vehicle.

To stop the alarm, press any button on the
wireless remote control.

When

is pressed for longer than

about one second, an alarm will sound
intermittently and the vehicle lights will
flash to deter any person from trying to
break into or damage your vehicle.

To stop the alarm, press any button on the
electronic key.

144

3-1. Key information

CAMRY_U

■

If you lose your keys

New genuine keys can be made by your Toyota dealer using the other key
(vehicles without a smart key system) or the other mechanical key (vehicles
with a smart key system) and the key number stamped on your key number
plate. Keep the plate in a safe place such as your wallet, not in the vehicle.

■

When riding in an aircraft

When bringing a key with wireless remote control function onto an aircraft,
make sure you do not press any button on the key while inside the aircraft
cabin. If you are carrying the key in your bag etc., ensure that the buttons are
not likely to be pressed accidentally. Pressing a button may cause the key to
emit radio waves that could interfere with the operation of the aircraft.

■

Conditions affecting operation



Vehicles without a smart key system

The wireless remote control function may not operate normally in the follow-
ing situations:

●

When the wireless key battery is depleted

●

Near a TV tower, electric power plant, gas station, radio station, large dis-
play, airport or other facility that generates strong radio waves or electrical
noise

●

When carrying a portable radio, cellular phone or other wireless communi-
cation devices

●

When the wireless key is in contact with, or is covered by a metallic object

●

When other wireless key (that emit radio waves) is being used nearby

●

If window tint with a metallic content or metallic objects are attached to the
rear window



Vehicles with a smart key system



P. 163

145

3-1. Key information

Op
eration

f each

compo

nen

CAMRY_U

■

Key battery depletion



Vehicles without a smart key system

●

The standard battery life is 1 to 2 years.

●

Even if the key is not used, the battery may become depleted and the fol-
lowing symptoms may occur. Replace the battery with a new one when nec-
essary. (



P. 494)

• The wireless remote control function does not operate.
• The area in which the wireless remote control function can be operated

becomes smaller.



Vehicles with a smart key system

●

The standard battery life is 1 to 2 years.

●

If the battery becomes low, an alarm will sound in the cabin when the engine
stops.

●

As the electronic key always receives radio waves, the battery will become
depleted even if the electronic key is not used. The following symptoms indi-
cate that the electronic key battery may be depleted. Replace the battery
when necessary. (



P. 494)

• The smart key system or the wireless remote control does not operate.
• The detection area becomes smaller.
• The LED indicator on the key surface does not turn on.

●

To reduce key battery depletion when the electronic key is to not be used for
long periods of time, set the electronic key to the battery-saving mode.
(



P. 163)

●

To avoid serious deterioration, do not leave the electronic key within 3 ft. (1
m) of the following electrical appliances that produce a magnetic field:

• TVs
• Personal computers
• Cellular phones, cordless phones and battery chargers
• Recharging cellular phones or cordless phones
• Table lamps
• Induction cookers

■

Replacing the battery



P. 494

■

Confirmation of the registered key number

The number of keys already registered to the vehicle can be confirmed. Ask
your Toyota dealer for details.

■

If a wrong key is used

The key cylinder rotates freely to isolate inside mechanism.

146

3-1. Key information

CAMRY_U

NOTICE

■

To prevent key damage

●

Do not drop the keys, subject them to strong shocks or bend them.

●

Do not expose the keys to high temperatures for long periods of time.

●

Do not get the keys wet or wash them in an ultrasonic washer etc.

●

Do not attach metallic or magnetic materials to the keys or place the keys

close to such materials.

●

Do not disassemble the keys.

●

Do not attach a sticker or anything else to the surface of the electronic key

and key (with a wireless remote control function).

●

Vehicles with a smart key system: Do not place the keys near objects that

produce magnetic fields, such as TVs, audio systems and induction cook-

ers, or medical electrical equipment, such as low-frequency therapy equip-

ment.

■

Carrying the electronic key on your person (vehicles with a smart key

system)

Carry the electronic key 3.9 in. (10 cm) or more away from electric appli-

ances that are turned on. Radio waves emitted from electric appliances

within 3.9 in. (10 cm) of the electronic key may interfere with the key, caus-

ing the key to not function properly.

■

In case of a smart key system malfunction or other key-related prob-

lems (vehicles with a smart key system)

Take your vehicle with all the electronic keys provided with your vehicle to

your Toyota dealer.

■

When an electronic key is lost (vehicles with a smart key system)

If the electronic key remains lost, the risk of vehicle theft increases signifi-

cantly. Visit your Toyota dealer immediately with all remaining electronic

keys that were provided with your vehicle.

147

Op
eration

f each

compo

nen

CAMRY_U

3-2. Opening, closing and locking the doors

◆

Smart key system (if equipped)

Carry the electronic key to enable this function.

Grip the driver’s door handle
to unlock the door. Holding
the driver’s door handle for
approximately 2 seconds
unlocks all the doors. Grip
the front passenger’s door
handle to unlock all the
doors.

Make sure to touch the sensor on the back of the handle.

The doors cannot be unlocked for 3 seconds after the doors are locked.

: The door unlock settings can be changed. (



P. 153)

Touch the lock sensor (the indentation on the side of the door
handle) to lock the doors.

Check that the door is securely locked.

Doors

Unlocking and locking the doors from the outside

148

3-2. Opening, closing and locking the doors

CAMRY_U

◆

Wireless remote control

Locks all the doors

Check that the door is securely locked.

Unlocks all the doors

Pressing the button unlocks the driver’s door. Pressing the button again
within 3 seconds unlocks the other doors.

Press and hold to open the windows

and the moon roof

1, 2

or pan-

oramic moon roof.

1, 2

(



P. 180, 184, 188)

: This setting must be customized at your Toyota dealer.

: If equipped



Vehicles without a smart key
system



Vehicles with a smart key sys-
tem

149

3-2. Opening, closing and locking the doors

Op
eration

f each

compo

nen

CAMRY_U

◆

Key

Turning the key operates the doors as follows:



Vehicles without a smart key system

Locks all the doors

Turn and hold to close the win-
dows

and moon roof.

1, 2

(



P. 180, 184)

Unlocks the door

Turning the key unlocks the
driver's door. Turning the key
again unlocks the other
doors.

Turn and hold to open the windows

and moon roof.

1, 2

(



P. 180, 184)

: This setting must be customized at your Toyota dealer.

: If equipped



Vehicles with a smart key system

The doors can also be locked and unlocked with the mechanical
key. (



P. 559)

150

3-2. Opening, closing and locking the doors

CAMRY_U

■

Operation signals

Doors:
A buzzer sounds and the emergency flashers flash to indicate that the doors
have been locked/unlocked. (Locked: Once; Unlocked: Twice)

Windows and moon roof or panoramic moon roof:
A buzzer sounds to indicate that the windows and moon roof or panoramic
moon roof are operating.

■

Security feature

If a door is not opened within approximately 60 seconds after the vehicle is
unlocked, the security feature automatically locks the vehicle again.

■

When the door cannot be locked by the lock sensor on the surface of the
door handle (vehicles with a smart key system)

■

Door lock buzzer

If an attempt to lock the doors using the smart key system is made when a
door is not fully closed, a buzzer sounds continuously. Fully close the door to
stop the buzzer, and lock the vehicle once more.

■

Alarm

Locking the doors will set the alarm system. (



P. 82)

■

If the smart key system or the wireless remote control does not operate
properly (vehicles with a smart key system)

Use the mechanical key to lock and unlock the doors. (



P. 559)

Replace the key battery with a new one if it is depleted. (



P. 494)

When the door cannot be locked even if
the lock sensor on the surface of the door
handle is touched by a finger, touch the
lock sensor with the palm.

When gloves are being worn, remove the
gloves.

151

3-2. Opening, closing and locking the doors

Op
eration

f each

compo

nen

CAMRY_U

◆

Door lock switches

Locks all the doors

Unlocks all the doors

◆

Inside lock buttons

Locks the door

Unlocks the door

The front doors can be opened
by pulling the inside handle
even if the lock buttons are in
the lock position.

Move the inside lock button to the lock position.

Close the door.



Vehicles without a smart key system

The door cannot be locked if either of the front doors is open and
the key is in the engine switch.



Vehicles with a smart key system

The door cannot be locked if the engine switch is in ACCESSORY
or IGNITION ON mode, or the electronic key is left inside the vehi-
cle.

The key may not be detected correctly and the door may be locked.

Unlocking and locking the doors from the inside

Locking the front doors from the outside without a key

152

3-2. Opening, closing and locking the doors

CAMRY_U

The door cannot be opened from
inside the vehicle when the lock is
set.

Unlock

Lock

These locks can be set to prevent
children from opening the rear
doors. Push down on each rear
door switch to lock both rear doors.

The following functions can be set or cancelled:

For instructions on customizing, refer to P. 608.

Rear door child-protector lock

Automatic door locking and unlocking systems

Function

Operation

Speed linked door locking function

All doors are automatically locked
when vehicle speed is approxi-
mately 12 mph (20 km/h) or higher.

Shift position linked door locking
function

All doors are automatically locked
when shifting the shift lever out of P.

Shift position linked door unlocking
function

All doors are automatically unlocked
when shifting the shift lever to P.

Driver’s door linked door unlocking
function

All doors are automatically unlocked
when driver’s door is opened.

153

3-2. Opening, closing and locking the doors

Op
eration

f each

compo

nen

CAMRY_U

■

Switching the door unlock function (vehicles with a smart key system)

It is possible to set which doors the entry function unlocks using the wireless
remote control.

Turn the engine switch off.

When the indicator light on the key surface is not on, press and hold

for approximately 5 seconds while pressing and holding

The setting changes each time an operation is performed, as shown below.
(When changing the setting continuously, release the buttons, wait for at least
5 seconds, and repeat step

: 4.2-inch display

: 7-inch display

To prevent unintended triggering of the alarm, unlock the doors using the
wireless remote control and open and close a door once after the settings

have been changed. (If a door is not opened within 60 seconds after

pressed, the doors will be locked again and the alarm will automatically be
set.)
In case that the alarm is triggered, immediately stop the alarm. (



P. 83)

Multi-information

display

Unlocking function

Beep

Holding the driver’s door
handle unlocks only the
driver’s door.

Exterior: Beeps 3
times
Interior: Pings once

Holding the front passen-
ger’s door handle unlocks
all the doors.

Holding either front door
handle unlocks all the
doors.

Exterior: Beeps
twice
Interior: Pings once

154

3-2. Opening, closing and locking the doors

CAMRY_U

■

Impact detection door lock release system

In the event that the vehicle is subject to a strong impact, all the doors are
unlocked. Depending on the force of the impact or the type of accident, how-
ever, the system may not operate.

■

Open door warning buzzer

If the vehicle reaches a speed of 3 mph (5 km/h), the master warning light
flashes and a buzzer sounds to indicate that the door(s) are not yet fully
closed.
The open door(s) is displayed on the multi-information display.

■

Conditions affecting the operation of the smart key system or wireless
remote control



Vehicles without a smart key system



P. 144



Vehicles with a smart key system



P. 163

■

Rear seat reminder function

In order to remind you not to forget luggage, etc. in the rear seat, when the
engine switch is turned off after any of the following conditions are met, a
buzzer will sound and a message will be displayed on the multi-information
display for approximately 6 seconds.

●

The engine is started within 10 minutes after opening and closing a rear
door.

●

A rear door has been opened and closed after the engine was started.

However, if a rear door is opened and then closed within approximately 2 sec-
onds, the rear seat reminder function may not operate.

The rear seat reminder function determines that luggage, etc. has been
placed in a rear seat based on opening and closing of a rear door. Therefore,
depending on the situation, the rear seat reminder function may not operate
and you may still forget luggage, etc. in the rear seat, or it may operate
unnecessarily.

The rear seat reminder function can be enabled/disabled. (



P. 106, 123)

■

Customization

Some functions can be customized. (



P. 606)

155

3-2. Opening, closing and locking the doors

eration

f each
compo

nen
t

CAMRY_U

WARNING

■

To prevent an accident

Observe the following precautions while driving the vehicle.

Failure to do so may result in a door opening and an occupant falling out,

resulting in death or serious injury.

●

Ensure that all doors are properly closed.

●

Do not pull the inside handle of the doors while driving.
Be especially careful for the front doors, as the doors may be opened

even if the inside lock buttons are in locked position.

●

Set the rear door child-protector locks when children are seated in the rear

seats.

■

When opening or closing a door

Check the surroundings of the vehicle such as whether the vehicle is on an

incline, whether there is enough space for a door to open and whether a

strong wind is blowing.

When opening or closing the door, hold the door handle tightly to prepare

for any unpredictable movement.

156

3-2. Opening, closing and locking the doors

CAMRY_U

Press and hold the trunk opener
switch.

◆

Smart key system (if equipped)

While carrying the electronic
key, press the button on the
trunk lid.

When all the doors are unlocked
using one of the following meth-
ods, the trunk can be opened
without the electronic key:

• Entry function
• Wireless remote control
• Door lock switches
• Automatic door unlocking system
• Mechanical key

Trunk

The trunk can be opened using the trunk opener switch, entry
function (vehicles with a smart key system), wireless remote
control or key.

Opening the trunk from inside the vehicle

Opening the trunk from outside the vehicle

157

3-2. Opening, closing and locking the doors

Op
eration

f each

compo

nen

CAMRY_U

◆

Wireless remote control

Press and hold the switch.

A buzzer sounds.

◆

Key



Vehicles without a smart key system

Turn the key clockwise to
release the trunk lid.



Vehicles with a smart key system

The trunk can be also opened using the mechanical key. (



P. 560)



Vehicles without a smart key
system



Vehicles with a smart key sys-
tem

158

3-2. Opening, closing and locking the doors

CAMRY_U

■

Trunk light

The trunk light turns on when the trunk is opened.

■

Function to prevent the trunk being locked with the electronic key inside
(vehicles with a smart key system)

●

When all doors are locked, closing the trunk lid with the electronic key left
inside the trunk will sound an alarm.
In this case, the trunk lid can be opened by pressing the trunk release but-
ton on the trunk lid.

●

If the spare electronic key is put in the trunk with all the doors locked, the
key confinement prevention function is activated so the trunk can be
opened. In order to prevent theft, take all electronic keys with you when
leaving the vehicle.

●

If the electronic key is put in the trunk with all the doors locked, the key may
not be detected depending on the location of the key and the surrounding
radio wave conditions. In this case, the key confinement prevention function
cannot be activated, causing the doors to lock when the trunk is closed.
Make sure to check where the key is before closing the trunk.

●

The key confinement prevention function cannot be activated if any one of
the doors is unlocked. In this case, open the trunk using the trunk opener.

■

Open trunk warning buzzer

If the vehicle reaches a speed of 3 mph (5 km/h), the master warning light
flashes and a buzzer sounds to indicate that the trunk is not yet fully closed.

■

Internal trunk release lever

■

If the smart key system or the wireless remote control does not operate
properly (vehicles with a smart key system)

Use the mechanical key to unlock the trunk. (



P. 560)

Replace the key battery with a new one if it is depleted. (



P. 494)

■

Customization

Some functions can be customized. (



P. 606)

The trunk lid can be opened by pulling up
the glow-in-the-dark lever located on the
inside of the trunk lid.

The lever will continue to glow for some
time after the trunk lid is closed.

159

3-2. Opening, closing and locking the doors

eration

f each
compo

nen
t

CAMRY_U

WARNING

Observe the following precautions.

Failure to do so may result in death or serious injury.

■

Before driving

●

Make sure that the trunk lid is fully closed. If the trunk lid is not fully closed,

it may open unexpectedly while driving and hit near-by objects or luggage

in the trunk may be thrown out, causing an accident.

●

Do not allow children to play in the trunk.

If a child is accidentally locked in the trunk, they could suffer from heat

exhaustion, suffocation or other injuries.

●

Do not allow a child to open or close the trunk lid.

Doing so may cause the trunk lid to open unexpectedly, or cause the

child’s hands, head, or neck to be caught by the closing trunk lid.

■

Important points while driving

Never let anyone sit in the trunk. In the event of sudden braking or a colli-

sion, they are susceptible to death or serious injury.

160

3-2. Opening, closing and locking the doors

CAMRY_U

WARNING

■

Using the trunk

Observe the following precautions.

Failure to do so may cause parts of the body to be caught, resulting in seri-

ous injury.

●

Remove any heavy loads, such as snow and ice, from the trunk lid before

opening it. Failure to do so may cause the trunk lid to suddenly shut again

after it is opened.

●

When opening or closing the trunk lid, thoroughly check to make sure the

surrounding area is safe.

●

If anyone is in the vicinity, make sure they are safe and let them know that

the trunk is about to open or close.

●

Use caution when opening or closing the trunk lid in windy weather as it

may move abruptly in strong wind.

●

On an incline it is more difficult to open or close the trunk lid than on a level

surface, so beware of the trunk lid unexpectedly opening or closing by

itself. Make sure that the trunk lid is fully open and secure before using the

trunk.

●

Do not attach any accessories other than genuine Toyota parts to the trunk

lid. Such additional weight on the trunk lid may cause the lid to suddenly

shut again after it is opened.

●

When opening the trunk lid, take care

so that it does not hit anyone in the face

or any other part of the body.

●

When closing the trunk lid, take extra

care to prevent your fingers etc. from

being caught.

●

When closing the trunk lid, make sure to

press it lightly on its outer surface.

Toyota Camry (2024 year). Manual in english - page 5