|
|
AC-60 HVAC SYSTEM (AUTO A/C) (DIAGNOSTICS) DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC) (LHD MODEL) 6 CHECK AUTO A/C CONTROL MODULE SIG- voltage between auto A/C control module Connector & terminal (i48) No. 2 (+) — Chassis ground ( −−−− ): Is the measured value within specified HEAT, D/H, DEF: 5 V, VENT, 7 CHECK AUTO A/C CONTROL MODULE SIG- actuator. 3) Turn the ignition switch to ON. actuator harness connector and chassis Connector & terminal (B77) No. 5 (+) — Chassis ground ( −−−− ): Is the measured value within specified 5 V 8 CHECK HARNESS BETWEEN AUTO A/C control module and mode door actuator. 3) Measure the resistance of harness between auto A/C control module and Connector & terminal (i48) No. 2 — (B77) No. 5: Is the measured value less than specified 1 Ω Replace the auto Repair the har- 9 CHECK AUTO A/C CONTROL MODULE SIG- voltage between auto A/C control module Connector & terminal (i48) No. 10 (+) — Chassis ground ( −−−− ): Is the measured value within specified VENT, D/H: 5 V, BI-LEVEL, Step Value Yes No |