Mitsubishi ASX (2018 year). Instruction - part 21

 

  Index      Mitsubishi     Mitsubishi ASX - instruction 2018 year in english

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  19  20  21  22   ..

 

 

Mitsubishi ASX (2018 year). Instruction - part 21

 

 

NOTE

l

You  can  call,  edit  or  delete  a  name  that  is
being read out.
Press the SPEECH button and say “Call” to
call the name, “Edit name” to edit it, or “De-
lete” to delete it.
The system will beep and then execute your
command.

l

If  you  press  the  SPEECH  button  and  say
“Continue”  or  “Previous”  while  the  list  is
being  read,  the  system  will  advance  or  re-
wind  the  list.  Say  “Continue”  to  proceed  to
the next entry or “Previous” to return to the
previous entry.

Deleting a telephone number

E00740000068

1. Press the SPEECH button.
2. Say “Phone book.”
3. The voice guide will say “Select one of

the  following:  new  entry,  edit  number,
edit name, list names, delete, erase all, or
import contact.” Say “Delete.”

4. The voice guide will say “Please say the

name of the entry you would like to de-
lete, or say list names.” Say the name of
the  phone  book  entry  in  which  the  tele-
phone number you want to delete is reg-
istered.

NOTE

l

Say “List names,” and the names registered
in the phone book will be read out in order.
Refer  to  “Vehicle  phone  book:  Listening  to
the list of registered names” on page 7-63.

5. If  only  one  telephone  number  is  regis-

tered  in  the  selected  phone  book  entry,
the  voice  guide  will  say  “Deleting
<name> <location>.”
If multiple telephone numbers are regis-
tered  in  the  selected  phone  book  entry,
the voice guide will say “Would you like
to delete [home], [work], [mobile], [oth-
er], or all?”
Select  the  location  to  delete,  and  the
voice  guide  will  say  “Deleting  <name>
<location>.”

NOTE

l

To delete the telephone numbers from all lo-
cations, say “All.”

6. The system will ask if you really want to

delete  the  selected  telephone  number(s)
to  go  ahead  with  the  deletion,  answer
“Yes.”
Answer “No,” the system will cancel de-
leting  the  telephone  number(s)  and  then
return to Step 4.

7. When the deletion of the telephone num-

ber  is  completed,  the  voice  guide  will
say  “<name>  <location>  deleted”  and
then  the  system  will  return  to  the  main
menu.
If  all  locations  are  deleted,  the  system
will  say  “<name>  and  all  locations  de-
leted”  and  the  name  will  be  removed
from the phone book. If numbers still re-
main  under  the  entry,  the  name  will  re-
tain the other associated numbers.

Erasing the phone book

E00740100069

You  can  delete  all  registered  information
from the vehicle phone book.

1. Press the SPEECH button.
2. Say “Phone book.”
3. The voice guide will say “Select one of

the  following:  new  entry,  edit  number,
edit name, list names, delete, erase all, or
import contact.” Say “Erase all.”

4. For  confirmation  purposes,  the  voice

guide will ask “Are you sure you want to
erase  everything  from  your  hands-free
system phone book?” Answer “Yes.”
Answer  “No”  to  cancel  the  deletion  of
all  registered  information  in  the  phone
book and return to the main menu.

Bluetooth

®

 2.0 interface*

7-64

OGAE18E1

For pleasant driving

7

5. The voice guide will say “You are about

to  delete  everything  from  your  hands-
free system phone book. Do you want to
continue?” Answer “Yes” to continue.
Answer  “No”  to  cancel  the  deletion  of
all  registered  information  in  the  phone
book and return to the main menu.

6. The  voice  guide  will  say  “Please  wait,

erasing  the  handsfree  system  phone
book” and then the system will delete all
data in the phone book.
When the deletion is complete, the voice
guide will say “Hands-free system phone
book  erased”  and  then  the  system  will
return to the main menu.

Mobile phone book

E00763900077

All  entries  in  the  phone  book  stored  in  the
cellular  phone  can  be  transferred  in  a  batch
and registered in the mobile phone book.
Up to 7 mobile phone books, each containing
up to 1,000 names, can be registered.
 
The  Bluetooth

®

  2.0  interface  automatically

converts  from  text  to  voice  the  names  regis-
tered  in  the  transferred  phone  book  entries,
and creates names.

NOTE

l

Only  the  mobile  phone  book  transferred
from  the  connected  cellular  phone  can  be
used with that cellular phone.

l

You cannot change the names and telephone
numbers in the phone book entries registered
in the mobile phone book. You cannot select
and  delete  specific  phone  book  entries,  ei-
ther.
To  change  or  delete  any  of  the  above,
change  the  applicable  information  in  the
source phone book of the cellular phone and
then transfer the phone book again.

To import a devices phone book
Follow the steps below to transfer to the mo-
bile phone book the phone book stored in the
cellular phone.

NOTE

l

Transfer  should  be  completed  while  the  ve-
hicle is parked.
Before transferring, make sure that the vehi-
cle is parked in a safe location.

l

The already stored phone book in the mobile
phone  book  is  overwritten  by  the  stored
phone book in the cellular phone.

l

All  or  part  of  data  may  not  be  transferred,
even when the cellular phone supports Blue-
tooth

®

,  depending  on  the  compatibility  of

the device.

NOTE

l

Only a home, a work, and a mobile number
can be imported.

l

The  maximum  supported  telephone  number
length is 19 digits. Any telephone number of
20  digits  or  more  will  be  truncated  to  the
first 19 digits.

l

If telephone numbers contain characters oth-
er than 0 to 9, *, # or +, these characters are
deleted before the transfer.

l

For  the  connection  settings  on  the  cellular
phone  side,  refer  to  the  instructions  for  the
cellular phone.

1. Press the SPEECH button.
2. Say “Phone book.”
3. The voice guide will say “Select one of

the  following:  new  entry,  edit  number,
edit name, list names, delete, erase all, or
import contact.” Say “Import contact.”

4. The  voice  guide  will  say  “Would  you

like  to  import  a  single  entry  or  all  con-
tacts?” Say “All contacts.”

5. The voice guide will say “Importing the

contact list from the mobile phone book.
This  may  take  several  minutes  to  com-
plete. Would you like to continue?” An-
swer  “Yes,”  transferring  to  the  mobile
phone book the phone book stored in the
cellular phone will start.
Answer  “No,”  to  return  to  the  main
menu.

Bluetooth

®

 2.0 interface*

7-65

OGAE18E1

For pleasant driving

7

NOTE

l

The  transfer  may  take  some  time  to  com-
plete depending on the number of contacts.

l

If the Bluetooth

®

 2.0 interface could not be

connected to the Bluetooth

®

 compatible cel-

lular  phone,  the  voice  guide  will  say  “Un-
able to transfer contact list from phone” and
then  the  system  will  return  to  the  main
menu.

l

If  you  press  the  HANG-UP  button  or  press
and hold the SPEECH button during the data
transfer,  the  transfer  will  be  cancelled  and
the system will return to the main menu.

l

If an error occurs during the data transfer, all
transfer  will  be  cancelled  and  the  voice
guide  will  say  “Unable  to  complete  the
phone book import” and then the system will
return to the main menu.

l

If  there  are  no  contacts  in  the  phone  book,
the voice guide will say “There are no con-
tacts on the connected phone.”

6. When the transfer is complete, the voice

guide  will  say  “Import  complete”  and
then  the  system  will  return  to  the  main
menu.

Bluetooth

®

 2.0 interface*

7-66

OGAE18E1

For pleasant driving

7

Enrollment commands

E00732401594

Phrase

English

French

Spanish

Italian

German

Dutch

Portuguese

Russian

1 0123456789

0123456789

0123456789

0123456789

0123456789

0123456789

0123456789

123456789

2 888 555 1212

888 555 1212

888 555 1212

888 555 1212

888 555 1212

888 555 1212

888 555 1212

888 555 1212

3 Call

Appeler

Llamar

Chiama

Anrufen

Bellen

Ligar

Вызов

4 Dial

Composer

Marcar

Componi

Wählen

Nummer keuze Marcar

Набор

5 Setup

Configurer

Configuración Configura

Einrichtung

Setup

Configurar

Настройка

6 Cancel

Annuler

Cancelar

Annulla

Abbrechen

Annuleren

Cancelar

Отмена

7 Continue

Continuer

Continuar

Continua

Weiter

Doorgaan

Continuar

Продолжить

8 Help

Aide

Ayuda

Aiuto

Hilfe

Help

Ajuda

Справка

 

USB input terminal*

E00761901432

You  can  connect  your  USB  memory  device
or  iPod*  to  play  music  files  stored  in  the
USB memory device or iPod.
This section explains how to connect and re-
move a USB memory device or iPod.
See the following section for details on how
to play music files.
Refer to “Listen to an iPod” on page 7-28.
Refer to “Listen to Audio Files on a USB De-
vice” on page 7-30.
Refer to “To play iPod/USB memory device
tracks via voice operation” on page 7-32.

*: “iPod” is a registered trademark of Apple
Inc. in the United States and other countries.

How to connect a USB memory

device

E00762001775

1. Park  your  vehicle  in  a  safe  place  and

turn  the  ignition  switch  to  the  “LOCK”
position  or  put  the  operation  mode  in
OFF.

2. Connect  a  commercially  available  USB

connector cable (B) to the USB memory
device (A).

USB input terminal*

7-67

OGAE18E1

For pleasant driving

7

3. Connect the USB connector cable (B) to

the USB input terminal (C).

NOTE

l

Do  not  connect  the  USB  memory  device  to
the  USB  input  terminal  directly.  The  USB
memory device may be damaged.

4. To  remove  the  USB  connector  cable,

turn  the  ignition  switch  to  the  “LOCK”
position  or  put  the  operation  mode  in
OFF  first  and  perform  the  installation
steps in reverse.

How to connect an iPod

E00762101822

1. Park  your  vehicle  in  a  safe  place  and

turn  the  ignition  switch  to  the  “LOCK”
position  or  put  the  operation  mode  in
OFF.

2. Connect the connector cable to the iPod.

NOTE

l

Use  a  genuine  connector  cable  from  Apple
Inc.

3. Connect  the  connector  cable  (A)  to  the

USB input terminal (B).

4. To remove the connector cable, turn the

ignition  switch  to  the  “LOCK”  position
or  put  the  operation  mode  in  OFF  first
and  perform  the  installation  steps  in  re-
verse.

Types of connectable devices

and supported file specifica-

tions

E00762201038

Except for vehicles equipped
with the Bluetooth

®

 2.0 inter-

face

E00770300145

For details about the types of connectable de-
vices and supported file specifications, refer
to the following pages and manuals.

For 

vehicles 

equipped 

with 

the

LW/MW/FM radio/CD player
Refer  to  “Listen  to  an  iPod”  on  page  7-28,
“Listen to Audio Files on a USB Device” on
page  7-30
  and  “Audio  Files  (MP3/WMA/
AAC)” on page 7-15.

For  vehicles  equipped  with  the  DISPLAY
AUDIO
Refer to the separate owner’s manual.

Smartphone Link Display Audio
Refer to the separate owner’s manual.

For 

vehicles 

equipped 

with 

the

MITSUBISHI  Multi-Communication  Sys-
tem (MMCS)
Refer to the separate owner’s manual.

USB input terminal*

7-68

OGAE18E1

For pleasant driving

7

For vehicles equipped with the
Bluetooth

®

 2.0 interface

E00770400029

For details about the types of connectable de-
vices  and  supported  file  specifications,  refer
to the following sections.

Device types

E00770500020

Devices  of  the  following  types  can  be  con-
nected.

Model name

Condition

USB memory device

Storage  capacity  of
256 Mbytes or more

Models  other  than
USB  memory  devi-
ces and iPods

Digital  audio  player
supporting mass stor-
age class

For  connectable  device  types  for  “iPod*,”
“iPod classic*,” “iPod nano*,” “iPod touch*”
and  “iPhone*,”  access  the  MITSUBISHI
MOTORS website.
Please read and agree to the “Warning about
Links to the Web Sites of Other Companies”.
The  websites  mentioned  above  may  connect
you to websites other than the MITSUBISHI
MOTORS website.
http://www.mitsubishi-motors.com/en/prod-
ucts/index.html
 

*: “iPod,” “iPod classic,” “iPod nano,” “iPod
touch”  and  “iPhone”  are  registered  trade-
marks of Apple Inc. in the United States and
other countries.

NOTE

l

Depending on the type of the USB memory
device  or  other  device  connected,  the  con-
nected  device  may  not  function  properly  or
the available functions may be limited.

l

It is recommended to use an iPod with firm-
ware updated to the latest version.

l

You  can  charge  your  iPod  by  connecting  it
to the USB input terminal when the ignition
switch  or  the  operation  mode  is  in  ON  or
ACC.

l

Do  not  keep  your  USB  memory  device  or
iPod in your vehicle.

l

It is recommended that you back up files in
case of data damage.

l

Do  not  connect  to  the  USB  input  terminal
any  device  (hard  disk,  card  reader,  memory
reader, etc.) other than the connectable devi-
ces specified in the previous section.
The device and/or data may be damaged. If
any of these devices was connected by mis-
take,  remove  it  after  turning  the  ignition
switch  to  the  “LOCK”  position  or  putting
the operation mode in OFF.

File specifications

E00770600021

You  can  play  music  files  of  the  following
specifications that are saved in a USB memo-
ry  device  or  other  device  supporting  mass
storage  class.  When  you  connect  your  iPod,
playable  file  specifications  depend  on  the
connected iPod.

Item

Condition

File format

MP3,  WMA,  AAC,
WAV

Maximum number of
levels  (including  the
root)

Level 8

Number of folders

700

Number of files

65,535

USB input terminal*

7-69

OGAE18E1

For pleasant driving

7

Sun visors

E00711202525

1- To eliminate front glare
2- To eliminate side glare

Vanity mirror

Type 1

A  vanity  mirror  is  fitted  to  the  back  of  the
sun visor.

Operating the lid of the vanity mirror will au-
tomatically turn on the mirror lamp (A).

CAUTION

l

If the lid of vanity mirror with lamp is kept
open for prolonged periods of time, the vehi-
cle’s battery will be discharged.

Type 2

A  vanity  mirror  is  fitted  to  the  back  of  the
sun visor.

Card holder

Cards  can  be  slipped  into  the  holder  (B)  on
the sun visor.

Sun visors

7-70

OGAE18E1

For pleasant driving

7

Ashtray*

E00711402455

CAUTION

l

Put  out  matches  and  cigarettes  before  they
are placed in the ashtray.

l

Don’t  put  papers  and  other  things  that  burn
into  your  ashtrays.  If  you  do,  cigarettes  or
other  smoking  materials  could  set  them  on
fire, causing damage.

l

Always close the ashtray. If left open, other
cigarette  butts  in  the  ashtray  may  be  rekin-
dled.

To use the ashtray, open the lid.

Moveable ashtray secure hold-

er

The moveable ashtray can be installed in the
cup holder.

Cigarette lighter*

E00711502805

The cigarette lighter can be used while the ig-
nition switch or the operation mode is in ON
or ACC.

1- Push all the way in.

The cigarette lighter will automatically return
to  its  original  position  with  a  “click”  when
ready. Pull it out for use.
After  use,  insert  the  cigarette  lighter  to  its
original position in the socket.

NOTE

l

Do  not  leave  the  cigarette  lighter  removed
from its socket, because the socket might be-
come  clogged  by  foreign  material  and  be
short-circuited.

Ashtray*

7-71

OGAE18E1

For pleasant driving

7

CAUTION

l

Do not touch the heating element or the cig-
arette lighter housing, hold the knob only to
prevent burns.

l

Do not allow children to operate or play with
the cigarette lighter as burns may occur.

l

Something is wrong with the cigarette light-
er if it does not pop back out within approxi-
mately 30 seconds of being pushed in.
Pull it out and have the problem corrected at
MITSUBISHI  MOTORS  Authorized  Serv-
ice Point.

l

Do not use any electric appliance that is not
approved  by  MITSUBISHI  MOTORS.  Do-
ing so could damage the socket. If you used
the cigarette lighter after damaging the sock-
et, the cigarette lighter might pop out or fail
to come out after being pushed in.

l

When the cigarette lighter socket is used as a
power  source  for  an  electric  appliance,  be
sure  that  the  electric  appliance  operates  at
12 V and has an electric capacity of 120 W
or  less.  In  addition,  long  use  of  the  electric
appliance  without  running  the  engine  may
run down the battery.

Accessory socket

E00711603047

CAUTION

l

Be sure to use a “plug-in” type accessory op-
erating at 12 V and at 120 W or less.
When  using  more  than  one  socket  at  the
same  time,  make  sure  that  the  electrical  ac-
cessories  are  12  V  accessories  and  that  the
total  power  consumption  does  not  exceed
120 W.

l

Long  use  of  the  electric  appliance  without
running  the  engine  may  run  down  the  bat-
tery.

l

When the accessory socket is not in use, be
sure  to  close  the  lid  or  install  the  cap,  be-
cause  the  socket  might  become  clogged  by
foreign material and be short-circuited.

To use a plug-in type accessory, open the lid
or remove the cap, and insert the plug in the
accessory socket.

NOTE

l

Accessory sockets in 2 locations can be used
at the same time.

The  accessory  socket  can  be  used  while  the
ignition  switch  or  the  operation  mode  is  in
ON or ACC.

Floor console*

Floor console box

Accessory socket

7-72

OGAE18E1

For pleasant driving

7

Interior lamps

E00712002692

1- Luggage room lamp
2- Room lamp (rear)*
3- Map & room lamps (front)

Sunshade illumination dimming control
switch*

NOTE

l

If  you  leave  the  lamps  on  without  running
the engine, you will run down the battery.
Before you leave the vehicle, make sure that
the lamps are turned off.

Map & room lamps (front)

E00717300638

Room lamp

1- (DOOR)

The lamp illuminates when a door or the
tailgate  is  opened.  It  goes  off  about  15
seconds  after  the  door  or  tailgate  is
closed.
However, the lamp goes off immediately
in the following cases:

• When  the  ignition  switch  is  turned

to  the  “ON”  position  or  the  opera-
tion mode is put in ON.

• When the central door lock function

is used to lock the vehicle.

• When  the  remote  control  switch  of

the keyless entry system or the key-
less operation system is used to lock
the vehicle.

• If  the  vehicle  is  equipped  with  the

keyless  operation  system,  when  the
keyless operation function is used to
lock the vehicle.

NOTE

l

When the key was used to start the engine, if
the key is removed while the doors and tail-
gate are closed, the lamp is illuminated and
after about 15 seconds it goes off.

l

When  the  keyless  operation  function  was
used  to  start  the  engine,  if  the  operation
mode is put in OFF while the doors and tail-
gate are closed, the lamp illuminates and af-
ter about 15 seconds it goes off.

l

The time until the lamp goes off can be ad-
justed.  For  details,  please  consult  a
MITSUBISHI  MOTORS  Authorized  Serv-
ice Point.

2-  

The lamp stays off regardless of whether
the doors and tailgate are open or closed.

Interior lamps

7-73

OGAE18E1

For pleasant driving

7

Map lamps

E00765200029

Regardless  of  the  position  of  the  room  lamp
switch, when the lens is pressed, the lamp on
the  side  that  was  pressed  will  illuminate.
Press the lens again to turn off the lamp.

Room lamp (rear)*

E00712301555

1- (

)

The  lamp  illuminates  regardless  of
whether  the  doors  and  tailgate  are  open
or closed.

2- (•)

The lamp illuminates when a door or the
tailgate  is  opened.  It  goes  off  about  15
seconds  after  the  door  or  tailgate  is
closed.
However, the lamp goes off immediately
in the following cases:

• When  the  ignition  switch  is  turned

to  the  “ON”  position  or  the  opera-
tion mode is put in ON.

• When the central door lock function

is used to lock the vehicle.

• When  the  remote  control  switch  of

the keyless entry system or the key-
less operation system is used to lock
the vehicle.

• If  the  vehicle  is  equipped  with  the

keyless  operation  system,  when  the
keyless operation function is used to
lock the vehicle.

NOTE

l

When the key was used to start the engine, if
the key is removed while the doors and tail-
gate are closed, the lamp is illuminated and
after about 15 seconds it goes off.

NOTE

l

When  the  keyless  operation  function  was
used  to  start  the  engine,  if  the  operation
mode is put in OFF while the doors and tail-
gate are closed, the lamp illuminates and af-
ter about 15 seconds it goes off.

l

The time until the lamp goes off can be ad-
justed.  For  details,  please  consult  a
MITSUBISHI  MOTORS  Authorized  Serv-
ice Point.

3- ( )

The lamp goes off regardless of whether
the doors and tailgate are open or closed.

Luggage room lamp

E00712700624

The  lamp  illuminates  when  the  tailgate  is
opened,  and  goes  out  when  the  tailgate  is
closed.

Interior lamps

7-74

OGAE18E1

For pleasant driving

7

Sunshade illumination dim-

ming control switch*

E00765000030

The  brightness  of  the  sunshade  illumination
can be adjusted to 3 different levels when the
ignition  switch  or  the  operation  mode  is  in
ON or ACC.
Each  time  you  press  the  switch,  the  bright-
ness switches in sequence from high → mid-
dle → low → off → high.

NOTE

l

The  brightness  can  be  adjusted  even  when
the  ignition  switch  is  in  the  “LOCK”  posi-
tion or the operation mode is in OFF, provi-
ded that the sunshade illumination is turned
on.

Sunshade illumination*

E00765100060

The sunshade illumination turns on when the
ignition  switch  or  the  operation  mode  is  in
ON or ACC.

NOTE

l

The  sunshade  illumination  does  not  turn  on
if  the  sunshade  illumination  dimming  con-
trol switch is off.
Refer  to  “Sunshade  illumination  dimming
control switch” on page 7-75.

When the sunshade illumination is turned on,
it will go off about 15 seconds after the fol-
lowing operation is performed.

l

When  the  key  was  used  to  start  the  en-
gine, the key is removed while the doors
and tailgate are closed.

l

For  vehicles  equipped  with  the  keyless
operation system, the operation mode is
put  in  OFF  while  the  engine  is  running
and the doors and the tailgate are closed.

NOTE

l

The  time  until  the  sunshade  illumination
goes off can be adjusted. If it is adjusted, the
time  until  the  room  &  map  lamps  go  off  is
also adjusted automatically at the same time.
For  details,  consult  a  MITSUBISHI
MOTORS Authorized Service Point.

The  sunshade  illumination  also  turns  on
when  a  door  or  the  tailgate  is  opened,  and
goes off 15 seconds after the door or the tail-
gate is closed, even when the engine switch is
in  the  “LOCK”  position  or  the  operation
mode is in OFF.
However, the sunshade illumination immedi-
ately goes off in the following cases:

l

When  the  central  door  lock  function  is
used to lock the vehicle.

l

When  the  remote  control  switch  of  the
keyless entry system or the keyless oper-
ation system is used to lock the vehicle.

l

If  the  vehicle  is  equipped  with  the  key-
less  operation  system,  when  the  keyless
operation function is used to lock the ve-
hicle.

Interior lamps

7-75

OGAE18E1

For pleasant driving

7

NOTE

l

The  sunshade  illumination  does  not  turn  on
if  the  sunshade  illumination  dimming  con-
trol switch is off.

l

The  time  until  the  sunshade  illumination
goes off can be adjusted. If it is adjusted, the
time  until  the  room  &  map  lamps  go  off  is
also adjusted automatically at the same time.
For  details,  consult  a  MITSUBISHI
MOTORS Authorized Service Point.

Interior lamp

*1

 auto-cutout

function

E00712901359

*1

  Interior  lamps,  including  the  room  and

map lamps

l

If  any  of  the  interior  lamps  are  left
switched on with the ignition switch is in
the  “LOCK”  position  or  the  operation
mode is in OFF, it goes off automatical-
ly after approximately 30 minutes.

l

The  lamps  will  illuminate  again  after
they  automatically  go  off  if  the  ignition
switch  or  the  engine  switch  is  operated,
or if the keyless entry system or keyless
operation system is operated.

NOTE

l

The  interior  lamp  auto  cut-out  function  can
be deactivated. The time until the lamps au-
tomatically  go  off  can  be  adjusted.  For  de-
tails  and  support,  consult  your  nearest
MITSUBISHI  MOTORS  Authorized  Serv-
ice Point.

Storage spaces

E00713101664

CAUTION

l

Never  leave  lighters,  cans  of  carbonated
drink, and spectacles in the cabin when park-
ing  the  vehicle  in  hot  sunshine.  The  cabin
will  become  extremely  hot,  so  lighters  and
other  flammable  items  may  catch  fire  and
unopened drink cans (including soft drink or
beer  cans)  may  rupture.  Also,  spectacles
with plastic lenses or materials could deform
or crack.

l

Keep the lids of storage spaces closed while
driving the vehicle. A lid or the contents of a
storage space could otherwise cause injuries.

NOTE

l

When leaving your vehicle, do not leave val-
uables in the storage spaces.

1- Luggage floor boxes
2- Floor console box
3- Glove box

Glove box

E00726200200

To open, pull the lever (A).

Storage spaces

7-76

OGAE18E1

For pleasant driving

7

NOTE

l

When  the  lamps  are  illuminated  with  the
lamp  switch  in  the  “

”,  “

”,  or  “AU-

TO” position (vehicles with automatic lamp
control), the glove box lamp illuminates.

To use the warming and cooling

function*

The  glove  box  can  be  used  to  keep  its  con-
tents  (e.g.  drink  bottles)  warm  or  cool  with
the  warm  or  cold  air  from  the  air  condition-
ing.

1. Turn  the  dial  in  the  glove  box  to  the

” position.

Turn  the  dial  to  the  “ ”  position  when
not using the warming and cooling func-
tion.

2. Turn  the  air  conditioning  temperature

control  dial  (A)  to  the  desired  tempera-
ture.

3. Turn  the  air  conditioning  blower  speed

selection dial (B) to the desired air flow.

Manual air conditioning

Automatic air conditioning

For  detailed  information  on  how  to  use
the air conditioning, refer to “Heater/Air
conditioning” on page 7-03.

NOTE

l

The  glove  box  has  the  same  temperature  as
the air that comes out of the air conditioning
ventilators,  so  it  is  not  possible  to  greatly
heat or cool the contents.
For  efficient  warming  or  cooling,  select  the

” mode.

Refer to “Mode selection dial” on page 7-03.

l

When  placing  drinks  in  the  glove  box,  read
the precautions on the container first.

l

Do  not  place  in  the  glove  box  chocolate,
sweets, or other items which are susceptible
to temperature changes or which may rot.

Pen holder

There is a pen holder inside the glove box.

Storage spaces

7-77

OGAE18E1

For pleasant driving

7

NOTE

l

There  is  a  limit  to  the  size  of  pens  that  can
be  stored  in  the  holder.  Forcibly  inserting
large pens could damage the holder.

Card holder

There is a card holder inside the glove box.

LHD

RHD

Floor console box

E00723302406

To open the console box, lift the release lever
(A) and raise the lid.
The floor console box can also be used as an
armrest.

The tissue holder and pen holder are located
on the underside of the floor console box lid.

B- Tissue holder
C- Pen holder
D- Tray

Luggage floor box*

E00718702024

The  box  for  storing  articles  is  located  inside
the luggage compartment.

Storage spaces

7-78

OGAE18E1

For pleasant driving

7

To use the box, raise the luggage floor board.

Cup holder

E00714502561

WARNING

l

Do not spray water or spill beverages in-
side  the  vehicle.  If  the  switches,  wires  or
electrical  components  become  wet,  they
could malfunction or cause a vehicle fire.
If  you  accidentally  spill  a  beverage,  wipe
up  as  much  liquid  as  possible  and  imme-
diately consult a MITSUBISHI MOTORS
Authorized Service Point.

CAUTION

l

Do  not  drink  beverages  while  driving.  This
is distracting and could cause an accident.

For the front seat

The  cup  holders  are  located  in  front  of  the
floor console box.

For the rear seat*

E00716901575

In order to use the cup holder, allow the arm-
rest (A) to drop down.
Refer to “Armrest” on page 4-06.

Bottle holder

E00718201501

WARNING

l

Do not spray water or spill beverages in-
side  the  vehicle.  If  the  switches,  wires  or
electrical  components  become  wet,  they
could malfunction or cause a vehicle fire.
If  you  accidentally  spill  a  beverage,  wipe
up  as  much  liquid  as  possible  and  imme-
diately consult a MITSUBISHI MOTORS
Authorized Service Point.

CAUTION

l

Do  not  drink  beverages  while  driving.  This
is distracting and could cause an accident.

l

Drinks could be spilled by the vibration and
jolts while driving. If the spilt drink is very
hot, you could be burnt.

There  are  bottle  holders  located  on  the  front
doors.

Cup holder

7-79

OGAE18E1

For pleasant driving

7

 

 

 

 

 

 

 

Content   ..  19  20  21  22   ..