Honda CR-V Hybrid (2022 year). Manual in english - page 8

124

uu

Indicators

u

Driver Information Interface Warning and Information Messages

In

strum

ent Pa

nel

Message

Condition

Explanation

●

Appears if the temperature inside the front sensor 
camera is too high and some driver assist systems 
cannot be activated.

●

Use the climate control system to cool down the 
camera.

●

Disappears 

- The camera has been cooled down 

and the systems are activated normally.

2

Front Sensor Camera

 P. 548

2

Honda Sensing

®

 P. 503

●

Appears if the area around the front sensor camera is 
blocked by dirt, mud, etc. and be prevented from 
detecting a vehicle in front.

●

May appear when driving in bad weather (rain, snow, 
fog, etc.)

●

When the front window gets dirty, stop your vehicle 
in a safe place, and wipe it off with a soft cloth.

●

Have your vehicle checked by a dealer if the message 
does not disappear even after you cleaned the area 
around the camera.

2

Front Sensor Camera

 P. 548

2

Honda Sensing

®

 P. 503

●

Appears if there is a problem with the auto high-beam.

●

Manually operate the headlight switch.

●

If you are driving with the high beam headlights 
when this happens, the headlights are changed to 
low beams.

125

uu

Indicators

u

Driver Information Interface Warning and Information Messages

In

strum

ent Pa

nel

Message

Condition

Explanation

●

Appears if there is a problem with the real time AWD 
with intelligent control system

TM

.

●

The engine drives the front wheels only in this state. 
Have your vehicle checked by a dealer.

●

Appears when the differential temperature is too high.

●

Stop in a safe place, change to 

(

P

, and idle the 

engine until the message disappears. If the message 
does not disappear, have your vehicle checked by a 
dealer.

2

Real Time AWD with Intelligent Control 
System

TM

 P. 492

Message

Condition

Explanation

●

Appears when there is a problem with the power 
tailgate system.

●

Manually open or close the power tailgate.

●

Have your vehicle checked by a dealer.

Message

Condition

Explanation

●

Appears while you are customizing the settings and the 
shift position changed out of 

(

P

.

2

Customized Features

 P. 140

Models with power tailgate

Models with color audio system

126

In

strum

ent Pa

nel

Gauges and Driver Information Interface

Gauges

Gauges include the speedometer, fuel gauge, and other related indicators. They are 
displayed when the power mode is in ON.

Displays your driving speed in mph or km/h.

Displays the amount of fuel left in the fuel tank.

■

Electric motor

The degree to which the electric motor is being powered is displayed by the readings 
on the 

POWER

 side.

■

Battery charge in progress

The degree to which the High Voltage battery is being charged is displayed by the 
readings on the 

CHARGE

 side.

■

Speedometer

■

Fuel Gauge

■

POWER/CHARGE Gauge

1

Gauges

Press the 

 (display/information) button 

repeatedly until the 

 icon is shown on the driver 

information interface. Press 

ENTER

, then press and 

hold it again. The speedometer reading and the 
displayed measurements will switch between mph 
and km/h.

1

Fuel Gauge

NOTICE

You should refuel when the reading approaches 

.

Running out of fuel can cause the engine to misfire, 
damaging the catalytic converter.

The actual amount of remaining fuel may differ from 
the fuel gauge reading.

E

127

uu

Gauges and Driver Information Interface

u

Gauges

In

strum

ent Pa

nel

Shows the remaining High Voltage battery charge level.

■

High Voltage Battery Charge Level Gauge

1

High Voltage Battery Charge Level Gauge

The High Voltage battery charge level may decrease 
under the following conditions:

•

When the 12-volt battery has been replaced.

•

When the 12-volt battery has been disconnected.

•

When the High Voltage battery control system 
corrects its reading.

The charge level reading will be corrected 
automatically while driving.

Changes in the temperature of the High Voltage 
battery can increase or decrease the battery’s 
charging capacity. If temperature changes cause the 
battery’s capacity to change, the number of 
indicators in the battery charge level gauge may also 
change, even if the amount of charge remains the 
same.

128

uu

Gauges and Driver Information Interface

u

Driver Information Interface

In

strum

ent Pa

nel

Driver Information Interface

The driver information interface shows information such as the estimated travelable 
distance and fuel economy of the vehicle. It also displays messages such as warnings 
and other helpful information.

■

Main displays

Press the 

 (display/information) button, and then press 

 or 

 to change the 

display. Press 

ENTER

 to see detailed information.

■

Switching the Display

 (Display/

Information) 

Button

Press 

, 

 or  .

Press 

ENTER

.

Eco Drive 

Display

Audio

*

Phone

*

Speed Unit & 

Disp OFF

Warning 

Messages

Average 

Fuel 

Economy 

Records

Driver 

Attention 

Monitor

Range & 

Fuel

Average 

Speed & 

Elapsed Time

Navigation

*

 

& Compass

*

Customize

*

Power Flow 

Monitor

AWD Torque 

Distribution 

Monitor

Maintenance 

Minder

TM

* Not available on all models

Continued

129

uu

Gauges and Driver Information Interface

u

Driver Information Interface

In

strum

ent Pa

nel

■

Trip computer

Press the 

 (

TRIP

) knob to change display.

Shows the total number of miles or kilometers that your vehicle has accumulated.

Shows the total number of miles or kilometers driven since the last reset. Meters A 
and B can be used to measure two separate trips.

■

Odometer

■

Trip Meter

Odometer
Outside temperature

Trip A

Trip B

 (

TRIP

) 

Knob

1

Trip Meter

Switch between trip meter A and trip meter B by 
pressing the 

 knob.

uu

Gauges and Driver Information Interface

u

Driver Information Interface

130

In

strum

ent Pa

nel

■

Resetting a trip meter

To reset a trip meter, display it, then press and hold the 

 knob. The trip meter is 

reset to 

0.0

.

Shows the estimated average fuel economy of each trip meter in mpg or l/100 km. 
The display is updated at set intervals. When a trip meter is reset, the average fuel 
economy is also reset.

Shows the estimated distance you can travel on the remaining power and fuel. This 
estimated distance is based on the vehicle’s current fuel economy.

Shows the time elapsed since Trip A or Trip B was reset.

Shows the average speed in mph or km/h since Trip A or Trip B was reset.

Shows the instant fuel economy as a bar graph in mpg or l/100 km.

■

Average Fuel Economy

■

Range

■

Elapsed Time

■

Average Speed

■

Instant Fuel Economy Gauge

1

Average Fuel Economy

You can change when to reset the average fuel 
economy.

2

Customized Features

 P. 140, 369

1

Elapsed Time

You can change when to reset the elapsed time.

2

Customized Features

 P. 140, 369

1

Average Speed

You can change when to reset the average speed.

2

Customized Features

 P. 140, 369

131

uu

Gauges and Driver Information Interface

u

Driver Information Interface

Continued

In

strum

ent Pa

nel

Shows the remaining oil life and Maintenance Minder

TM

.

2

Maintenance Minder

TM

 P. 581

Shows the average fuel economy for the last 
three driving cycles (1-3), and the current 
driving cycle (0) in mpg or l/100 km.

Each time you set the power mode to ON, the 
display is updated, and the oldest record is 
deleted.

■

Maintenance Minder

TM

■

Average Fuel Economy Records

132

uu

Gauges and Driver Information Interface

u

Driver Information Interface

In

strum

ent Pa

nel

■

Eco Drive Display

The vehicle icon on the display moves forward or backward while driving.
The more aggressive the acceleration is, the further the icon moves forward.
The more aggressive the deceleration is, the further the icon moves backward.
Keep the icon near the center of the circle for better fuel economy while driving.

■

Eco Drive Display/Drive Cycle Score/Lifetime Points

Aggressive 

Deceleration

Vehicle Icon

Aggressive 

Acceleration

Moderate 

Deceleration

Slow 

Acceleration/ 

Deceleration

Moderate 

Acceleration

133

uu

Gauges and Driver Information Interface

u

Driver Information Interface

Continued

In

strum

ent Pa

nel

■

Drive Cycle Score/Lifetime Points

Appear for a few seconds when you set the power mode to VEHICLE OFF. Each has 
three stages. Depending on your driving style, the leaf icon(s) and the gauge 
increase or decrease to indicate that you have reached a different stage of fuel 
economy.

■

Resetting the Drive Cycle Score

1.

Make sure the shift position is in 

(

P

. Turn the power mode to ON.

2.

If ECON mode is on, press the 

ECON

 button to turn it off.

3.

Turn the power mode to VEHICLE OFF.

4.

Turn the power mode to ON again.

u

Make sure to complete steps from 4 through 6 within 30 seconds.

5.

Depress the brake pedal twice.

6.

Press the 

ECON

 button twice.

u

The color of the ambient meter will turn to monochrome.

7.

Turn the power mode to VEHICLE OFF.

Drive Cycle 

Score

Lifetime 

Points

Advancing to 

2nd Stage

Receding to 

2nd Stage

Advancing to 

3rd Stage

Receding to 

3rd Stage

uu

Gauges and Driver Information Interface

u

Driver Information Interface

134

In

strum

ent Pa

nel

Displays the power flow of the motor and engine, indicating the vehicle’s power 
source and whether the battery is being charged. 

■

Power Flow Monitor

1

Power Flow Monitor

While the vehicle is stationary with the engine 
running, the following may appear on the driver 
information interface.

Power is supplied by 

the motor and the 

engine.

The motor is charging 

the High Voltage 

battery.

The engine is running 

and the motor is 

charging the High 

Voltage battery.

Regeneration

Power is being 

supplied by the engine 

only.

Hybrid (HV)

Engine ON

Engine OFF

Power is supplied by 

the motor.

Electric Vehicle (EV)

The engine is running 

and the motor is charging 

the High Voltage battery.

Engine (Direct Drive)

Power Flow

Engine

Continued

135

uu

Gauges and Driver Information Interface

u

Driver Information Interface

In

strum

ent Pa

nel

The Driver Attention Monitor analyzes steering inputs to determine if the vehicle is 
being driven in a manner consistent with drowsy or inattentive driving. If it 
determines that the vehicle is being driven in such a manner, it will display the 
degree of the driver's attention on the driver information interface.

When the 

 (display/information) button 

is pressed, bars in the Driver Information 
Interface light up in white to indicate the 
degree of the driver's attention.

2

Switching the Display

 P. 128

■

Driver Attention Monitor

1

Driver Attention Monitor

The Driver Attention Monitor cannot always detect if 
the driver is tired or inattentive.
Regardless of the system's feedback, if you are 
feeling tired, stop in a safe location and rest for as 
long as needed.

Driver Information Interface

ENTER

 (Display/ Information) Button

Level

136

uu

Gauges and Driver Information Interface

u

Driver Information Interface

In

strum

ent Pa

nel

If two bars light up, the 

Driver Attention 

Level Low

 message will appear.

If one bar lights up, the 

Driver Attention 

Level Low. Time For A Break

 message will 

appear, a beep will sound, and the steering 
wheel will vibrate.
If this message appears, stop in a safe location 
and rest for as long as needed. 
The message will disappear when the 

ENTER

 

button is pressed or when the system has 
determined that the driver is driving normally.
If the driver does not take a break and the 
monitor continues to detect that the driver is 
very tired, the message will appear again after 
approximately 15 minutes, accompanied by a 
beep and steering wheel vibrations.
The message does not appear when the 
traveling time is 30 minutes or less.

Continued

137

uu

Gauges and Driver Information Interface

u

Driver Information Interface

In

strum

ent Pa

nel

■

The Driver Attention Monitor resets when

•

the power system is turned off.

•

the driver unfastens the seat belt and opens the door while the vehicle is stopped.

■

For the Driver Attention Monitor to function

•

the vehicle must be traveling above 25 mph (40 km/h).

•

the electric power steering (EPS) system indicator must be off.

■

Depending on driving conditions or other factors, the Driver Attention 
Monitor may not function in the following circumstances.

•

the steering assist function of the Lane Keeping Assist System (LKAS) is active.

2

Lane Keeping Assist System (LKAS)

 P. 534

•

the condition of the road is poor, e.g. the surface is unpaved or bumpy.

•

it is windy.

•

the driver is frequently operating the vehicle in an assertive manner such as 
changing lanes or accelerating.

■

Customizing

You can change the Driver Attention Monitor settings. Select 

Tactile And Audible 

Alert

, 

Tactile Alert

, or 

OFF

.

2

Customized Features

 P. 140, 369

1

For the Driver Attention Monitor to function

The bars in the Driver Information Interface remain 
grayed out unless the Driver Attention Monitor is 
functioning.

uu

Gauges and Driver Information Interface

u

Driver Information Interface

138

In

strum

ent Pa

nel

The indicators on the display show the 
amount of torque being transferred to the 
right front, left front, right rear, and left rear 
wheels.

2

Real Time AWD with Intelligent Control 
System

TM

 P. 492

Shows the outside temperature in Fahrenheit.

■

Adjusting the outside temperature display

Adjust the temperature reading by up to ±5°F if the temperature reading seems 
incorrect.

■

AWD Torque Distribution Monitor

■

Outside Temperature

1

Outside Temperature

The temperature sensor is in the front bumper.
Road heat and exhaust from another vehicle can 
affect the temperature reading when your vehicle 
speed is less than 19 mph (30 km/h).

It may take several minutes for the display to be 
updated after the temperature reading has stabilized.

You can adjust the temperature reading.

2

Customized Features

 P. 140, 369

Continued

139

uu

Gauges and Driver Information Interface

u

Driver Information Interface

In

strum

ent Pa

nel

■

Compass

*

Shows the compass screen.

■

Turn-by-Turn Directions

When driving guidance is provided by the navigation system

*

 or Android Auto, turn-

by-turn directions to your destination appear.

2

Refer to the Navigation System Manual

2

Android Auto

TM

 P. 336

Show the current audio information.

2

Audio System Basic Operation

 P. 272

Show the current phone information.

2

Bluetooth

®

 HandsFreeLink

®

 P. 422

■

Navigation

*

■

Audio

*

■

Phone

*

1

Navigation

*

You can select whether to have the turn-by-turn 
display come on or not during the route guidance.

2

Customized Features

 P. 369

* Not available on all models