Honda Accord Hybrid (2019 year). Instruction - part 8

112

uu

Indicators

u

Driver Information Interface Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

• Appears if the automatic brake hold is automatically 

canceled while it is in operation.

• Immediately depress the brake pedal.

• Appears when the automatic brake hold system is 

turned off.

2 Automatic Brake Hold P. 545

• Appears when the automatic brake hold button is 

pressed without wearing the driver’s seat belt.

• Fasten the driver’s seat belt.

2 Automatic Brake Hold P. 545

• Appears when the automatic brake hold button is 

pressed without depressing the brake pedal while 
the automatic brake hold is in operation.

• Press the automatic brake hold button with the brake 

pedal depressed.

2 Automatic Brake Hold P. 545

113

uu

Indicators

u

Driver Information Interface Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

• Appears when the parking brake is applied 

automatically while it is in operation.

2 Automatic Brake Hold P. 545
2 Parking Brake P. 540

• Appears when the electric parking brake switch is 

pressed without depressing the brake pedal while 
the electric parking brake is in operation.

• Press the electric parking brake switch with the brake 

pedal depressed.

2 Parking Brake P. 540

• Appears after you set the power mode to 

ACCESSORY or ON.

• Appears after you unlock and open the driver’s 

door.

2 Turning on the Power P. 458

Canadian models

114

uu

Indicators

u

Driver Information Interface Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

• Appears when the power mode is in ACCESSORY.

—

• Appears after the driver’s door is opened when the 

power mode is in ACCESSORY.

• Press the POWER button twice with your foot off the 

brake pedal to change the power mode to VEHICLE 
OFF.

• Appears when you close the door with the power 

mode in ON without the smart entry remote inside 
the vehicle.

• Disappears when you bring the smart entry remote 

back inside the vehicle and close the door.

2 Smart Entry Remote Reminder P. 190

• Appears when the smart entry remote battery 

becomes weak.

• Replace the battery as soon as possible.

2 Replacing the Button Battery P. 613

115

uu

Indicators

u

Driver Information Interface Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

• Appears if the smart entry remote battery is too 

weak to turn on the power system or the key is not 
within operating range to turn on the power system.
A beeper sounds six times.

• Bring the smart entry remote in front of the POWER 

button to be touched with.

2 If the Smart Entry Remote Battery is Weak P. 639

• Appears as soon as a problem is detected in the 

smart entry system or push button starting system.

• Appears constantly - Have your vehicle checked by a 

dealer.

• Appears if you press the POWER button while the 

vehicle is moving.

• The message will disappear after six seconds or when 

the power mode is set to VEHICLE OFF.

116

uu

Indicators

u

Driver Information Interface Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

• Appears if the vehicle is being driven in a manner 

consistent with drowsy or inattentive driving.

2 Driver Attention Monitor P. 148

117

uu

Indicators

u

Driver Information Interface Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

• Appears when you set the power mode to OFF while 

driving.

• Immediately stop in a safe place, set the parking brake, 

then restart the power system. If the message 
disappears, continue driving.

• Appears if the vehicle is stopped and the driver’s seat 

belt is unfastened, as there is a possibility that the 
vehicle may roll.

• When the vehicle is idling or when you are parking or 

exiting the vehicle, put the transmission into 

(

P before 

releasing the brake pedal.

2 Shift Operation P. 467

• Appears when you put the transmission into 

(

N, 

then release the 

(

N button.

2 If you want to keep the transmission in 

(

N

 

position [car wash mode] P. 469

118

uu

Indicators

u

Driver Information Interface Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

• Appears when you try to change the shift position 

without releasing your foot off the accelerator pedal.

• Release your foot off the accelerator pedal, then select 

a shift button.

• Appears when the 

(

P button is pressed while the 

vehicle is moving.

• Appears if you put the transmission into 

(

R while 

the vehicle is moving forward, or into 

(

D while the 

vehicle is reversing.

• Make sure that the vehicle comes to a stop before 

operating the select button.

• Appears when you set the power mode to ON 

without fastening the driver’s seat belt.

• Appears when you change the shift position after 

(

P has been automatically selected with the driver’s 

door open, the driver’s seat belt unfastened, then 
the brake pedal is released.

• Fasten the seat belt properly before you start to drive.

2 Shift Operation P. 467

• Appears when you try to change the shift position 

without depressing the brake pedal.

• Depress the brake pedal, then select a shift button.

119

uu

Indicators

u

Driver Information Interface Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

• Appears if you depress the accelerator pedal when 

the transmission is in 

(

N.

• Release the accelerator pedal. After that, depress the 

brake pedal and change the transmission position.

• Appears when the shift is repeatedly changed 

between 

(

P and any other position.

• Wait for a while then change the shift position.

• Appears when you press and hold 

(

N button for 

more than two seconds.

• Disappears when you set the shift position to a shift 

other than 

(

N.

2 If you want to keep the transmission in 

(

N

 

position [car wash mode] P. 469

120

uu

Indicators

u

Driver Information Interface Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

• Appears if there is a problem with the automatic 

lighting control system.

• Appears while driving - Manually turn the lights on, 

and have your vehicle checked by a dealer.

• Appears if there is a problem with the headlights.

• Appears while driving - The headlights may not be 

on. When conditions allow you to drive safety, have 
your vehicle checked by a dealer as soon as possible.

• Appears if there is a problem with the parking sensor 

system.

• Check if the area around the sensor(s) is covered with 

mud, ice, snow, etc. If the indicator(s) stays on or the 
beeper does not stop even after you clean the area, 
have the system checked by a dealer.

• Appears if there are obstacles around the sensors.

• Check for obstacles near your vehicle to make sure it is 

safe to park.

Models with parking sensor system

Models with parking sensor system

121

uu

Indicators

u

Driver Information Interface Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

• Appears if there is a problem with the auto high-

beam.

• Manually operate the headlight switch, and have your 

vehicle checked by a dealer.

• If you are driving with the high beam headlights when 

this happens, the headlights are changed to low beams.

• Appears if anything covers the radar sensor cover 

and prevents the sensor from detecting a vehicle in 
front.

• May appear when driving in bad weather (rain, 

snow, fog, etc.)

• When the radar sensor gets dirty, stop your vehicle in a 

safe place, and wipe off dirt using a soft cloth.

• Have your vehicle checked by a dealer if the message 

does not disappear even after you clean the sensor cover.

2 Radar Sensor P. 539
2 Honda Sensing® P. 491

• Appears if the temperature inside the front sensor 

camera is too high and some driver assist systems 
cannot be activated.

• Use the climate control system to cool down the camera.
• Disappears - The camera has been cooled down and 

the systems are activated normally.

2 Front Sensor Camera P. 537
2 Honda Sensing® P. 491
2 Auto High-Beam P. 195

• Appears if the area around the front sensor camera 

is blocked by dirt, mud, etc. and be prevented from 
detecting a vehicle in front.

• May appear when driving in bad weather (rain, 

snow, fog, etc.)

• When the front window gets dirty, stop your vehicle in 

a safe place, and wipe it off with a soft cloth.

• Have your vehicle checked by a dealer if the message 

does not disappear even after you cleaned the area 
around the camera.

2 Front Sensor Camera P. 537
2 Honda Sensing® P. 491
2 Auto High-Beam P. 195

122

uu

Indicators

u

Driver Information Interface Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

• Appears when ACC with LSF has been automatically 

canceled.

• You can resume the set speed after the condition that 

caused ACC with LSF to cancel improves. Press the 
RES/+ button.

2 Adaptive Cruise Control (ACC) with Low Speed 

Follow (LSF) P. 503

• Flashes when the system senses a likely collision with 

a vehicle in front of you.

• Take the appropriate means to prevent a collision (apply 

the brakes, change lanes, etc.)

2 Collision Mitigation Braking System

TM

 (CMBS

TM

) 

P. 494

2 Adaptive Cruise Control (ACC) with Low Speed 

Follow (LSF) P. 503

123

uu

Indicators

u

Driver Information Interface Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

• Appears when ACC with LSF is canceled due to 

excessive high vehicle speed.

• Reduce the speed, then reset ACC with LSF.

2 Adaptive Cruise Control (ACC) with Low Speed 

Follow (LSF) P. 503

• Appears when the speed of the vehicle is too high 

for you to set ACC with LSF.

• Reduce the speed, then set ACC with LSF.

2 Adaptive Cruise Control (ACC) with Low Speed 

Follow (LSF) P. 503

• Appears when the distance between your vehicle 

and the vehicle ahead of you is too close while ACC 
with LSF is in operation.

• ACC with LSF has been automatically canceled.

2 Adaptive Cruise Control (ACC) with Low Speed 

Follow (LSF) P. 503

• Appears when pressing the SET/– button while the 

distance between your vehicle and the vehicle 
ahead of you is too close.

• ACC with LSF cannot be set.

2 Adaptive Cruise Control (ACC) with Low Speed 

Follow (LSF) P. 503

124

uu

Indicators

u

Driver Information Interface Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

• Appears just before the ACC with LSF is 

automatically canceled when you are descending a 
long hill etc. (The following interval is automatically 
set to extra long).

• Appears when the ACC with LSF has been 

automatically canceled.

2 Adaptive Cruise Control (ACC) with Low Speed 

Follow (LSF) P. 503

• Appears when you are descending a long hill etc. 

and you press the RES/+ or SET/– button.

2 Adaptive Cruise Control (ACC) with Low Speed 

Follow (LSF) P. 503

125

uu

Indicators

u

Driver Information Interface Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

• Appears when the driver’s seat belt is unfastened 

while your vehicle is automatically stopped by ACC 
with LSF.

• ACC with LSF has been automatically canceled.

2 Adaptive Cruise Control (ACC) with Low Speed 

Follow (LSF) P. 503

• Appears when pressing the SET/– button while the 

driver’s seat belt is unfastened.

• ACC with LSF cannot be set.

2 Adaptive Cruise Control (ACC) with Low Speed 

Follow (LSF) P. 503

• Appears when the shift position is changed to any 

position other than 

(

D while ACC with LSF is in 

operation.

• ACC with LSF has been automatically canceled.

2 Adaptive Cruise Control (ACC) with Low Speed 

Follow (LSF) P. 503

• Appears when pressing the SET/– button while the 

transmission is in any position other than 

(

D.

• ACC with LSF cannot be set.

2 Adaptive Cruise Control (ACC) with Low Speed 

Follow (LSF) P. 503

126

uu

Indicators

u

Driver Information Interface Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

• Appears when the vehicle is stopped on a very steep 

slope while ACC with LSF is in operation.

• ACC with LSF has been automatically canceled.

2 Adaptive Cruise Control (ACC) with Low Speed 

Follow (LSF) P. 503

●

Appears when pressing the SET/– button while the 
vehicle is stopped on a very steep slope.

●

ACC with LSF cannot be set.

2 Adaptive Cruise Control (ACC) with Low Speed 

Follow (LSF) P. 503

127

uu

Indicators

u

Driver Information Interface Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

• Appears when the parking brake is applied 

automatically while ACC with LSF is in operation.

• ACC with LSF has been automatically canceled.

2 Adaptive Cruise Control (ACC) with Low Speed 

Follow (LSF) P. 503

2 Parking Brake P. 540

• Appears when pressing the SET/– button while the 

parking brake is applied.

• ACC with LSF cannot be set.

2 Adaptive Cruise Control (ACC) with Low Speed 

Follow (LSF) P. 503

2 Parking Brake P. 540

• Appears when pressing the SET/– button while the 

vehicle is moving and the brake pedal is depressed.

• ACC with LSF cannot be set.

2 Adaptive Cruise Control (ACC) with Low Speed 

Follow (LSF) P. 503

• Appears if ACC with LSF is canceled while your 

vehicle is automatically stopped by ACC with LSF.

• Immediately depress the brake pedal.