Content .. 7 8 9 10 ..

Honda Accord Hybrid (2019 year). Instruction - part 9

128

Indicators

Driver Information Interface Warning and Information Messages

strum

nt Pa

nel

Message

Condition

Explanation

• Appears when the vehicle is driving out of a detected

lane. The steering wheel vibrates rapidly.

• Keep the vehicle within the lane you are driving.

2 Lane Keeping Assist System (LKAS) P. 519

• Appears when the vehicle is driving out of a detected

lane.

- The steering wheel vibrates rapidly when the

vehicle is drifting out of a detected lane.

- The steering wheel vibrates rapidly when the

vehicle is drifting out of a detected lane. The system
also steers the vehicle to help you remain within
your driving lane.

• Keep the vehicle within the lane you are driving.

2 Road Departure Mitigation (RDM) System P. 527

• You can change the setting for the road departure

mitigation system. Narrow, Normal, Wide, and
Warning Only can be selected.

2 Customized Features P. 367, 378

• Appears when the vehicle is likely to drive out of a

detected lane.
The RDM system also steers the vehicle to help you
remain within your driving lane.

—

Lane Keeping Assist System (LKAS)

Road Departure Mitigation (RDM) System

When you selected Warning Only

When you selected Narrow, Normal or Wide

Road Departure Mitigation (RDM) System
When you selected Narrow

129

Indicators

Driver Information Interface Warning and Information Messages

Continued

strum

nt Pa

nel

Message

Condition

Explanation

• Blinks when you fail to steer the vehicle. The beeper

sounds simultaneously if selected by customization.

• Operate the steering wheel to resume the LKAS.

• Appears when the LKAS is in operation, or the LKAS

button is pressed, but there is a problem with a
system related to the LKAS. The LKAS cancels
automatically. The beeper sounds simultaneously if
selected by customization.

• If any other system indicators come on, such as the

VSA®, ABS and brake system, take appropriate action.

2 Indicators P. 82

• Appears if there is a problem with the adaptive

damper system.

• Have your vehicle checked by a dealer. Your vehicle will

have normal damping ability without the adaptive
damper feature.

• Appears if the ECON mode or SPORT mode cannot

be changed due to certain situations, such as a
system error or adverse driving conditions.

2 ECON Button P. 475
2 SPORT Mode P. 471

Models with adaptive damper system

130

Indicators

Driver Information Interface Warning and Information Messages

strum

nt Pa

nel

Message

Condition

Explanation

• Appears when you unlock and open the driver’s

door while the power system is on by smart entry
remote.

2 Remote Engine Start with Vehicle Feedback P. 460

• Appears if there is a problem with the acoustic

vehicle alerting system.

• Have your vehicle checked by a dealer immediately.

• Appears when the High Voltage battery is running

extremely low.

• Contact a dealer immediately.

• Appears if the engine needs to be started when you

press the EV button.

—

131

Indicators

Driver Information Interface Warning and Information Messages

Continued

strum

nt Pa

nel

Message

Condition

Explanation

• Appears when EV mode has been automatically

canceled.

2 EV Button P. 13

• Appears when the power system temperature is

high.

• Your vehicle has less ability to accelerate and may be

harder to start on an incline.

• Park in a safe place, and cool the system down.

2 Overheating P. 643

• Appears when the High Voltage battery temperature

is low.

• Your vehicle has less ability to accelerate and may be

harder to start on an incline.

• Disappears once you start driving as the High Voltage

battery warms up.

• Appears when the High Voltage battery temperature

is too low to operate (approx. -22°F [-30°C] or
below).

• You can start the engine and use the climate control

system to warm up the interior, which will also warm
the High Voltage battery enough for you to drive the
vehicle.

132

Indicators

Driver Information Interface Warning and Information Messages

strum

nt Pa

nel

Message

Condition

Explanation

• Appears when the High Voltage battery and other

system control temperatures are too low to operate
(approx. -40°F [-40°C] or below).

• You must wait for an increase in the ambient

temperature or move the vehicle to a warmer location.

• Consult a dealer if necessary.

• Appears if the power system is in diagnostic mode.

• You may notice a decrease in available power. Have

your vehicle checked by a dealer.

• Appears when you failed to select EV mode or EV

mode is automatically canceled.

• The cause may be shown with the following

message:

- Battery Temperature At Limit.
- Battery Charge Too Low.
- Engine Too Cold.
- Cabin Being Heated.
- Speed Too High.
- Hard Acceleration Requested.

• EV mode is available once the condition is improved or

the cause that canceled EV mode is cleared.

133

Continued

strum

nt Pa

nel

Gauges and Displays

Gauges

Gauges include the speedometer, fuel gauge, and related indicators. They are
displayed when the power mode is in ON.

Displays your driving speed in mph (U.S.) or km/h (Canada).

Displays the amount of fuel left in the fuel tank.

■

Speedometer

■

Fuel Gauge

Speedometer

You can show another speed unit on the driver
information interface and set the displayed
measurements to read in either mph and km/h.

2 POWER/CHARGE Gauge P. 146

Fuel Gauge

NOTICE

You should refuel when the reading approaches

Running out of fuel can cause the engine to misfire,
damaging the catalytic converter.

The actual amount of remaining fuel may differ from
the fuel gauge reading.

Gauges and Displays

Gauges

134

strum

nt Pa

nel

Shows the remaining High Voltage battery charge level.

■

High Voltage Battery Charge Level Gauge

High Voltage Battery Charge Level Gauge

The High Voltage battery charge level may decrease
under the following conditions:

•

When the 12-volt battery has been replaced.

•

When the 12-volt battery has been disconnected.

•

When the High Voltage battery control system
corrects its reading.

The charge level reading will be corrected
automatically while driving.

Changes in the temperature of the High Voltage
battery can increase or decrease the battery’s
charging capacity. If temperature changes cause the
battery’s capacity to change, the number of
indicators in the battery charge level gauge may also
change, even if the amount of charging remains the
same.

135

Gauges and Displays

Driver Information Interface

Continued

strum

nt Pa

nel

Driver Information Interface

The driver information interface shows the odometer, trip meter, outside
temperature indicator, and other gauges.
It also displays important messages such as warnings and other helpful information.

■

Accessing contents in the main display

Press the

(home) button, then roll the left selector wheel to scroll to the content

you want to see. Press the left selector wheel to see detailed information.

*1: Models with color audio
*2: Models with Display Audio

■

Switching the Display

Switching the Display

To go back to the previous screen, press the

(back) button.

You can edit, add, or delete the meter contents using
the audio/information screen.

2 Customizing the Meter P. 282

Models with Display Audio

136

Gauges and Displays

Driver Information Interface

strum

nt Pa

nel

(Home) Button

P. 146

P. 139

P. 141

P. 147

P. 145

P. 144

P. 152

P. 151

P. 144

Left Selector Wheel

Roll the left selector
wheel.

P. 143

P. 148

P. 154

P. 156

P. 153

* Not available on all models

137

Gauges and Displays

Driver Information Interface

Continued

strum

nt Pa

nel

■

Sub display

Press the TRIP button to change the display.

Shows the total number of miles or kilometers that your vehicle has accumulated.

■

Odometer

Odometer

Outside Temperature

Trip A

Trip B

TRIP Button

TRIP

Gauges and Displays

Driver Information Interface

138

strum

nt Pa

nel

Shows the total number of miles or kilometers driven since the last reset. Meters A
and B can be used to measure two separate trips.

■

Resetting a trip meter

To reset a trip meter, display it, then press and hold the TRIP Button. The trip meter
is reset to 0.0.

Shows the outside temperature in Fahrenheit (U.S.) or Celsius (Canada).

■

Adjusting the outside temperature display

Adjust the temperature reading by up to ±5°F or ±3°C if the temperature reading
seems incorrect.
Use the customized features in the audio/information screen to correct the
temperature.

2 Customized Features P. 367, 378

■

Trip Meter

■

Outside Temperature

Trip Meter

Switch between trip meter A and trip meter B by
pressing the TRIP Button.

Outside Temperature

The temperature sensor is in the front bumper.
Road heat and exhaust from another vehicle can
affect the temperature reading when your vehicle
speed is less than 19 mph (30 km/h).

It may take several minutes for the display to be
updated after the temperature reading has stabilized.

139

Gauges and Displays

Driver Information Interface

Continued

strum

nt Pa

nel

Roll the left selector wheel to switch between trip computer A and trip computer B.

■

Range & Fuel

Left Selector Wheel

Roll

Trip Computer A

Trip Computer B

Trip Meter

Range

Average Fuel
Economy

Instant Fuel
Economy

Gauges and Displays

Driver Information Interface

140

strum

nt Pa

nel

■

Trip meter

Shows the total number of miles or kilometers driven since the last reset. Meters A
and B can be used to measure two separate trips.

Resetting a trip meter
To reset the trip meter, display it, press the left selector wheel and then select Reset.

The trip meter is reset to 0.0.

■

Average fuel economy (Avg. Fuel)

Shows the estimated average fuel economy of each trip meter in mpg or l/100 km.
The display is updated at set intervals. When a trip meter is reset, the average fuel
economy is also reset.

■

Instant fuel economy

Shows the instant fuel economy as a bar graph in mpg or l/100 km.

■

Range

Shows the estimated distance you can travel on the remaining power and fuel. This
estimated distance is based on the vehicle’s current fuel economy.

Trip meter

Switch between trip meter A and trip meter B by
rolling the left selector wheel.

Resetting the trip meter in the Range & Fuel, the trip
meter in the sub display resets at the same time.

Average fuel economy (Avg. Fuel)

You can change when the average fuel economy is
reset.

2 Customized Features P. 367, 378