2

1

FE06-0093b

1.

Remove  the  battery  negative  cable.  Refer  to

2.11.8.1

 

Battery Disconnection

.

2.

Lift and support the vehicle. Refer to

1.3

 

Lifting and Jacking

the Vehicle

.

3.

Remove  the  front  wheels.  Refer  to 

4.4.5.1

 

Wheel

Replacement

.

4.

Disconnect the front wheel speed sensor wiring harness
from the shock absorber.

5.

Remove  the  front  fender  liner.  Refer  to 

12.10.1.8

 

Front

Wheelhouse Liner Replacement

.

6.

Disconnect  the  front  wheel  speed  sensor  harness
connector  (1)  from  the  back  of  the  front  fender  liner.
Remove the sensor wiring harness bolt (2).

FE06-0094b

7.

Remove the front wheel speed sensor retaining bolt.

8.

Remove the front wheel speed sensor.

Installation Procedure:

FE06-0095b

1.

Install the front wheel speed sensor and using the bolt with
a flat washer to tighten.

Torque: 19 Nm (Metric) 14 lb-ft (US English)

Brake System

ABS / TCS / EBD / ESP

6-97

2

1

1

FE06-0096b

2.

Fix the front wheel speed sensor wiring harness (1).

3.

Connect the front wheel speed sensor harness connector
(2).

4.

Install the front fender liner.

5.

Lower the vehicle.

6.

Connect the battery negative cable.

7.

Install the front wheels.

Note

Left  front  and  right  front  wheel  speed  sensor
replacement is similar.

6.6.7.3  Wheel  Speed  Sensor  Replacement
(Rear)

Removal Procedure:

Warning!

Refer to "Battery Disconnect Warning" in "Warnings and
Notices" .

FE06-0097b

1.

Disconnect  the  battery  negative  cable.  Refer  to

2.11.8.1

 

Battery Disconnection

.

2.

Lift and support the vehicle. Refer to

1.3

 

Lifting and Jacking

the Vehicle

.

3.

Remove  the  rear  wheels.  Refer  to 

4.4.5.1

 

Wheel

Replacement

.

4.

Disconnect the rear wheel speed sensor wiring harness
from the rear suspension.

5.

Remove the rear wheel speed sensor wiring harness to
rear axle retaining bolts.

6.

Remove the rear seat back. Refer to 

12.7.3.6

 

Rear Seat

Armrest Assembly Replacement

.

6-98

ABS / TCS / EBD / ESP

Brake System

FE06-0098b

7.

Disconnect the rear wheel speed sensor wiring harness
connector.

FE06-0099b

8.

Remove the rear wheel speed sensor retaining bolts.

9.

Remove the rear wheel speed sensor.

Installation Procedure:

FE06-0100b

1.

Install the rear wheel speed sensor and use the bolt with
a flat washer to tighten.

Torque: 19 Nm (Metric) 14 lb-ft (US English)

Brake System

ABS / TCS / EBD / ESP

6-99

FE06-0101b

2.

Connect the rear wheel speed sensor wiring harness.

FE06-0098b

3.

Run through the rear wheel speed sensor wiring harness
from the passenger compartment and connect the wiring
harness connector.

4.

Install the rear seat back.

5.

Connect the battery negative cable.

6.

Install the rear wheels.

Note

Left and right rear wheel speed sensor replacement
is similar.

6-100

ABS / TCS / EBD / ESP

Brake System