FE03-0043b

5.

Install the selector shaft and tighten the bolts.

Note

Do not damage the oil seal.

FE03-0044b

6.

Install the selector shaft sleeve.

FE03-0045b

7.

Install the selector shaft sleeve locking pin.

Transmission / Drive Axle

Manual Transmission

3-71

FE03-0046b

8.

Install the selector shaft outer retaining ring.

9.

Complete the shift control assembly assemble.

3.3.8.6 Shift Shaft Replacement

Removal Procedure:

FE03-0047b

1.

Remove  the  transmission  assembly.  Refer  to

3.3.8.3

 

Transmission Assembly Replacement

.

2.

Remove the shift control assembly. Refer to 

3.3.8.4

 

Shift

Control Assembly Replacement

.

3.

Remove the reverse gear locating bolt.

FE03-0048b

4.

Remove the transmission case external connecting bolts.

3-72

Manual Transmission

Transmission / Drive Axle

FE03-0049b

5.

Remove the transmission case internal connecting bolts.

FE03-0050b

6.

Remove the transmission rear case.

1

1

2

FE03-0051b

7.

Remove the reverse shift rod.

Note

Before  remove  the  retaining  bolt  (1),  remove  the
return spring end (2).

Transmission / Drive Axle

Manual Transmission

3-73

FE03-0052b

8.

Remove the 1st/2nd shift shaft retaining bolts.

FE03-0053b

9.

Remove the 1st/2nd shift shaft locking pin.

Note

Use a specified tool, otherwise the locking pin may
lock and can not be removed.

FE03-0054b

10. Rotate  the  1st/2nd  shift  shaft  180˚  and  pull  upward  to

remove  it.  Pay  attention  to  5th  and  reverse  shift  shaft
locking pin.

Note

The  shift  shaft  and  fork  fitting  is  highly  precise.
During the removal, it is prohibited to force the shift
shaft, as this will cause the shift shaft bending and
can not be used.

3-74

Manual Transmission

Transmission / Drive Axle