FE03-0172b

9.

Install the front sub frame and related components.

10. Install the front wheels.

11. Remove the engine hoisting tool.

FE03-0182b

12. Install the transmission upper retaining bolts.

FE03-0183b

13. Install the transmission left bracket assembly.

Transmission / Drive Axle

Manual Transmission

3-59

FE03-0166b

14. Install the clutch slave cylinder tube.

FE03-0184b

15. Install the clutch slave cylinder and bleed the air.

FE03-0185b

16. Install the gearshift control mechanism.

17. Connect  the  crankshaft  position  sensor  wiring  harness

connector.

18. Connect  the  vehicle  speed  sensor  wiring  harness

connector.

19. Connect the reverse lamp switch harness connector.

20. Install the battery bracket.

21. Connect the battery negative cable.

3.3.8.4 Shift Control Assembly Replacement

Removal Procedure:

Warning!

Refer to "Battery Disconnection Warning" in "Warnings
and Notices".

3-60

Manual Transmission

Transmission / Drive Axle

FE03-0011b

1.

Disconnect  the  battery  negative  cable.  Refer  to

2.11.8.1

 

Battery Disconnection

.

2.

Remove the intake pipe clamp.

FE03-0013b

3.

Remove the Canister solenoid valve components from the
Canister solenoid valve bracket.

FE03-0014b

4.

Remove the selector shaft rod retaining pin.

Transmission / Drive Axle

Manual Transmission

3-61

FE03-0015b

5.

Remove the selector shaft locating pin and the selector
shaft rod.

FE03-0016b

6.

Remove the selector shaft rod bolt.

FE03-0017b

7.

Remove the selector shaft locating pin and the selector
shaft rod.

3-62

Manual Transmission

Transmission / Drive Axle