Citroën C-Elysée (2022 year). Manual in english - page 9

130

CITROËN Connect Nav

artist, Madonna", "play song, Hey Jude", or "play 

album, Thriller".

Media voice commands are available 

only with a USB connection.

"Telephone" voice 

commands

If there is no telephone connected by 

Bluetooth, a voice message announces: 

"Please first connect a telephone", and the 

voice session will be closed.

Voice commands

 

Call contact <...>

*

Dial <…>

*

Display contacts

*

Display calls

*

Call (message box | voicemail)

*

Help messages

 

To make a phone call, say "call" followed by 

the contact name, for example: "Call David 

Miller". You can also include the phone type, for 

example: "Call David Miller at home". To make 

a call by number, say "dial" followed by the 

* This function is available only if the telephone connected to the system supports downloading of contacts and recent calls and the corresponding 

download has been performed.

** This function is available only if the telephone connected to the system supports downloading of contacts and recent calls and the corresponding 

download has been performed.

phone number, for example, "Dial 107776 835 

417". You can check your voicemail by saying 

"call voicemail". To send a text, say "send quick 

message to", followed by the contact, and then 

the name of the quick message you'd like to 

send. For example, "send quick message to 

David Miller, I'll be late". To display the list of 

calls, say "display calls". For more information on 

SMS, you can say "help with texting".

"Text message" voice 

commands

If there is no telephone connected by 

Bluetooth, a voice message announces: 

"Please first connect a telephone", and the 

voice session will be closed.

Voice commands

 

Send text to <...>

Listen to most recent message

**

Help messages

 

To hear your messages, you can say "listen to 

most recent message". When you want to send 

a text, there's a set of quick messages ready for 

you to use. Just use the quick message name 

and say something like "send quick message to 

Bill Carter, I'll be late". Check the phone menu 

for the names of the supported messages.

Please say "call" or "send quick message to", 

and then select a line from the list. To move 

around a list shown on the display, you can 

say "go to start", "go to end", "next page" or 

"previous page". To undo your selection, say 

"undo". To cancel the current action and start 

again, say "cancel".

The system only sends pre-recorded 

"Quick messages".

Navigation

Choice of a destination

To a new destination

Press 

Navigation

 to display the main 

page.

Press the "

MENU

" button to access the 

secondary page.

Select "

Enter address

". 

Select the "

Country

". 

131

CITROËN Connect Nav

12

Enter the "

City

", the "

Street

" and the 

"

Number

", and confirm by pressing on 

the displayed suggestions.

Press "

OK

" to select the "

Guidance 

criteria

".

And/or

Select "

See on map

" to choose the 

"

Guidance criteria

".

Press "

OK

" to start guided navigation. 

Zoom in/out using the touch buttons or 

with two fingers on the screen.

In order to be able to use the navigation 

function, you must enter the "

City

", the 

"

Street

" and the "

Number

" on the virtual 

keyboard, or select them from the list in 

"

Contact

" or in the address "

History

".

If you do not enter the street number, you 

will be guided to one end of the street.

To a recent destination

Press 

Navigation

 to display the main 

page.

Press the "

MENU

" button to access the 

secondary page.

Select "

My destinations

". 

Select the "

Recent

” tab.

Select the chosen address from the list to display 

the "

Guidance criteria

”.

Press "

OK

" to start guided navigation. 

Select "

Position

" to see the point of 

arrival on the map.

To "My home" or "My work"

Press 

Navigation

 to display the main 

page.

Press the "

MENU

" button to access the 

secondary page.

Select "

My destinations

". 

Select the "

Preferred

” tab.

Select "

My home

". 

Or

Select "

My work

". 

Or

Select a preset favourite destination.

To a contact

Press 

Navigation

 to display the main 

page.

Press the "

MENU

" button to access the 

secondary page.

Select "

My destinations

". 

Select the "

Contact

” tab.

Select a contact in the list to start guided 

navigation.

To points of interest (POI)

Points of interest (POI) are listed in different 

categories.

Press 

Navigation

 to display the main 

page.

Press the "

MENU

" button to access the 

secondary page.

Select "

Points of interest

". 

Select the "

Travel

", "

leisure

", 

"

Commercial

", "

Public

" or "

Geographic

” 

tab.

Or

Select "

Search

" to enter the name and 

address of a POI.

Press "

OK

" to calculate the route. 

To a point on the map

Press 

Navigation

 to display the main 

page.

Explore the map by sliding your finger across the 

screen.

Select the destination by pressing on the map.

Tap the screen to place a marker and 

display the sub-menu.

Press this button to start guided 

navigation.

Or

132

CITROËN Connect Nav

Press this button to save the displayed 

address.

Pressing and holding on a point opens a 

list of nearby POIs.

To GPS coordinates

Press 

Navigation

 to display the main 

page.

Explore the map by sliding your finger across the 

screen.

Press this button to display the world 

map.

Using the grid, select the desired country or 

region by zooming in.

Press this button to enter the GPS 

coordinates.

A marker is displayed in the middle of the 

screen, with the "

Latitude

" and 

"

Longitude

" coordinates.

Press this button to start guided 

navigation.

Or

Press this button to save the displayed 

address.

OR

Press this button to enter the "

Latitude

" 

value using the virtual keypad.

And

Press this button to enter the "

Longitude

" 

value using the virtual keypad.

TMC (Traffic Message 

Channel)

TMC (Traffic Message Channel) 

messages are linked to a European 

standard on the broadcasting of traffic 

information via the RDS system on FM radio, 

transmitting traffic information in real time.

The TMC information is then displayed on a 

GPS Navigation system map and taken into 

account straight away during navigation, so 

as to avoid accidents, traffic jams and closed 

roads.

The display of danger zones depends on 

the legislation in force and subscription 

to the service.

Connected navigation

Depending on version

Depending on the equipment level of the vehicle

Network connection provided by the 

vehicle

 

 

OR

Network connection provided by the 

user

 

 

Connected navigation 

connection

As a safety measure and because it 

requires sustained attention by the driver, 

using a smartphone when driving is 

prohibited.

All operations must be done with the 

vehicle 

stationary

.

For access to connected navigation, you 

can use the connection provided by the 

vehicle via the "Emergency or assistance call" 

services or use your smartphone as a 

modem.

Activate and enter settings for sharing the 

smartphone connection.

Network connection provided by the 

vehicle

The system is automatically connected to 

the modem included for the "Emergency 

or assistance calls" services and does not 

require a connection provided by the user via 

their smartphone.

133

CITROËN Connect Nav

12

Network connection provided by the 

user

USB connection

Connect a USB cable.

The smartphone charges when 

connected by a USB cable.

Bluetooth connection

Activate the Bluetooth function on the 

telephone and ensure that it is visible to 

all (see the "Applications" section).

Wi-Fi connection

Select a Wi-Fi network found by the 

system and connect to it (see the 

"Applications" section).

Restrictions of use:

–  With CarPlay

®

, connection sharing is 

only with a Wi-Fi connection.

–  With MirrorLink

TM

, connection sharing is 

only with a USB connection.

The quality of services depends on the quality 

of the network connection.

With the arrival of "TOMTOM TRAFFIC", 

the services are available.

The services offered with connected 

navigation are as follows.

A Connected Services pack:

– Weather,

–  Filling stations,

–  Car park,

–  Traffic,

–  POI local search.

A Danger zone pack (option).

The processes and standards are 

constantly changing; for the 

communication process between the 

smartphone and the system to work correctly, 

we recommend that you 

update the 

operating system of the smartphone as 

well as the date and time of the 

smartphone and the system.

Settings specific to 

connected navigation

In the "Settings" menu, you can create a 

profile for an individual or for a group of 

people with shared interests, and configure a 

wide range of settings (radio presets, audio 

settings, navigation history, favourite contacts, 

etc.). Settings are applied automatically.

Press 

Navigation

 to display the main 

page.

Press the "

MENU

" button to access the 

secondary page.

Select "

Settings

". 

Select "

Map

".

Activate or deactivate:

– "

Allow declaration of danger zones

".

– “

Guidance to final destination on foot

"

– “

Authorize sending information

"

These settings must be configured for each 

profile.

Select "

Alerts

".

Activate or deactivate “

Warn of danger 

zones

”.

Select this button. 

Activate: 

Give an audible warning

 

For access to connected navigation, you 

must tick the option: "

Authorize sending 

information

"

Danger zone alerts may or may not be 

displayed, depending on the applicable 

legislation and subscription to the 

corresponding service.

Declaration of "Danger 

zones"

To send information on the declaration 

of danger zones, you must tick the 

option: "

Allow declaration of danger zones

"

Press 

Navigation

 to display the main 

page.

Press the "

Declare a new danger zone

" 

button located in the upper bar on the 

touch screen

Select the "

Type

” option to select the type 

of "Danger area".

134

CITROËN Connect Nav

Select the "

Speed

" option and enter it 

using the virtual keypad.

Press "

OK

" to save and send the 

information.

"Danger zones" pack 

updates

Press 

Settings

 to display the primary 

page.

Press the "

OPTIONS

" button to go to the 

secondary page.

Select "

System administration

". 

Select the "

System info

" tab. 

Select "

View

" to display the versions of 

the different modules installed in the 

system.

Select "

Update(s) due

". 

You can download the system and map 

updates from the Brand’s website.

The update procedure can also be found on 

the website.

Displaying weather 

information

Press 

Navigation

 to display the main 

page.

Press this button to display the list of 

services.

Select "

View map

". 

Select "

Weather

". 

Press this button to display basic 

information.

Press this button to display detailed 

weather information.

The temperature displayed at 6 a.m. will 

be the maximum temperature for the day.

The temperature displayed at 6 p.m. will be 

the minimum temperature for the night.

Applications

Internet Browser

Press 

Applications

 to display the main 

page.

Press "

Connectivity

" to access the "

Internet 

Browser

” function.

Press "

Internet Browser

" to display the browser 

home page.

Select your country of residence. 

Press "

OK

" to save and start the browser. 

Connection to the internet is via one of 

the network connections provided by the 

vehicle or the user.

Connectivity

Press 

Applications

 to display the main 

page.

Press "

Connectivity

" to access the 

CarPlay

®

, 

MirrorLink

TM

 or 

Android Auto

 functions.

Applications

Press 

Applications

 to display the main 

page.

Press "

Applications

" to display the applications 

home page.

CarPlay

®

 smartphone 

connection

As a safety measure and because it 

requires sustained attention by the driver, 

using a smartphone when driving is 

prohibited.

All operations must be done with the 

vehicle 

stationary

.

Smartphone synchronisation allows 

users to display smartphone applications 

compatible with the CarPlay

®

 technology on 

the vehicle’s screen, provided that the 

smartphone's CarPlay

®

 function has 

previously been activated.

As processes and standards are constantly 

changing, 

we recommend updating your 

smartphone's operating system

.

135

CITROËN Connect Nav

12

For the list of compatible smartphones, visit 

the vehicle brand's website in your country.

Connect the USB cable. The smartphone 

charges when connected by the USB 

cable.

Press "

Telephone

" to display the 

CarPlay

®

 interface.

Or

Connect the USB cable. The smartphone 

charges when connected by the USB 

cable.

From the system, press "

Applications

" to 

display the main page.

Press "

Connectivity

" to access the "CarPlay

®

” 

function.

Press "

CarPlay

" to display the CarPlay

®

 

interface.

On connecting the USB cable, the 

CarPlay

®

 function deactivates the 

system's Bluetooth

®

 mode.

MirrorLink

TM

 smartphone 

connection

As a safety measure and because it 

requires sustained attention by the driver, 

using a smartphone when driving is 

prohibited.

All operations must be done with the 

vehicle 

stationary

.

Smartphone synchronisation allows 

users to display smartphone applications 

compatible with the MirrorLink

TM

 technology 

on the vehicle’s screen.

Processes and standards are constantly 

changing. The communication process 

between the smartphone and the system 

requires the smartphone to be unlocked; 

update the smartphone's operating system 

and the date and time on the smartphone 

and in the system

.

For the list of compatible smartphones, visit 

the vehicle brand's website in your country.

As a safety measure, applications can 

only be viewed with the vehicle 

stationary; display is interrupted once the 

vehicle is moving.

The "

MirrorLink

TM

" function requires the 

use of a compatible smartphone and 

compatible applications.

When connecting a smartphone to the 

system, we recommend enabling 

Bluetooth

®

 on the smartphone.

Connect the USB cable. The smartphone 

charges when connected by the USB 

cable.

From the system, press "

Applications

" to 

display the main page.

Press "

Connectivity

" to access the 

"MirrorLink

TM

” function.

Press "

MirrorLink

TM

" to start the 

application in the system.

Depending on the smartphone, it may be 

necessary to activate the "

MirrorLink

TM

" 

function.

During the procedure, several screen 

pages relating to certain features are 

displayed.

Accept to start and complete the connection.

Once the connection is established, a page 

is displayed with the applications already 

downloaded to your smartphone which are 

compatible with the MirrorLink

TM

 technology.

Access to the different audio sources remains 

available in the margin of the MirrorLink

TM

 

display, using the touch buttons located in the 

upper bar.

Access to the menus for the system is possible 

at any time using the dedicated buttons.

There may be a wait for the availability of 

applications, depending on the quality of 

your network.

Android Auto smartphone 

connection

As a safety measure and because it 

requires sustained attention by the driver, 

using a smartphone when driving is 

prohibited.

All operations must be done with the 

vehicle 

stationary

.

136

CITROËN Connect Nav

Synchronising a smartphone allows 

users to display applications compatible 

with the smartphone's Android Auto 

technology on the vehicle screen.

Processes and standards are constantly 

changing. The communication process 

between the smartphone and the system 

requires the smartphone to be unlocked; 

update the smartphone's operating system 

and the date and time on the smartphone 

and in the system

.

For the list of compatible smartphones, visit 

the vehicle brand's website in your country.

As a safety measure, applications can 

only be viewed with the vehicle 

stationary; display is interrupted once the 

vehicle is moving.

The "

Android Auto

" function requires 

the use of a compatible smartphone and 

compatible applications.

Connect the USB cable. The smartphone 

charges when connected by the USB 

cable.

From the system, press "

Applications

" to 

display the main page.

Press "

Connectivity

" to access the "Android 

Auto” function.

Press "

Android Auto

" to start the 

application in the system.

During the procedure, several screen 

pages relating to certain features are 

displayed.

Accept to start and complete the connection.

Access to the different audio sources remains 

available in the margin of the Android Auto 

display, using the touch buttons located in the 

upper bar.

Access to the menus for the system is possible 

at any time using the dedicated buttons.

In Android Auto mode, the function that 

displays rolling menus by briefly pressing 

the screen with three fingers is disabled.

There may be a wait for the availability of 

applications, depending on the quality of 

your network.

Bluetooth connection

®

As a safety measure and because they 

require prolonged attention on the part of 

the driver, the operations for pairing of the 

Bluetooth mobile telephone with the Bluetooth 

hands-free system of your audio system must 

be carried out with the 

vehicle stationary

 

and the ignition on.

Activate the Bluetooth function on the 

telephone and ensure that it is "visible to 

all" (telephone configuration).

Procedure from the telephone

Select the system name in the list of 

devices detected.

In the system, accept the connection request 

from the telephone.

To complete the pairing, whichever 

procedure used (from the telephone or 

from the system), ensure that the code is the 

same in the system and in the telephone.

Procedure from the system

Press 

Connect-App

 to display the main 

page.

Press the "

OPTIONS

" button to go to the 

secondary page.

Press on "

Bluetooth connection

". 

Select "

Search

".

The list of telephones detected is 

displayed.

If the pairing procedure fails, we 

recommend deactivating and then 

reactivating the Bluetooth function on your 

telephone.

Select the name of the chosen telephone 

in the list.

Depending on the type of telephone, you 

may be prompted to accept (or decline) 

the transfer of your contacts and messages.

137

CITROËN Connect Nav

12

Connection sharing

The system offers to connect the telephone with 

3 profiles:

– "

Telephone

" (hands-free kit, telephone only),

– "

Streaming

" (streaming: wireless playing of 

the audio files on the telephone),

– "

Mobile internet data

".

The "

Mobile internet data

" profile must 

be activated for connected navigation 

(where the vehicle does not have "Emergency 

and assistance call" services), having first 

activated sharing of this connection on your 

smartphone.

Select one or more profiles.

 

Press "

OK

" to confirm.

 

Wi-Fi connection

Network connection via the smartphone's Wi-Fi.

Press 

Connect-App

 to display the main 

page.

Press the "

OPTIONS

" button to access the 

secondary page.

Select "

Wi-Fi network connection

". 

Select the "

Secured

", "

Not secured

" or 

"

Stored

” tab.

Select a network. 

Using the virtual keypad , enter the Wi-Fi 

network "

Key

" and "

Password

".

Press "

OK

" to establish the connection. 

The Wi-Fi connection and Wi-Fi 

connection sharing are exclusive.

Wi-Fi connection sharing

Creation of a local Wi-Fi network by the system.

Press 

Connect-App

 to display the main 

page.

Press the "

OPTIONS

" button to access the 

secondary page.

Select "

Share Wi-Fi connection

". 

Select the "

Activation

" tab to activate or 

deactivate Wi-Fi connection sharing.

And/or

Select the "

Settings

" tab to change the system’s 

network name and password.

Press "

OK

" to confirm.

 

To protect against unauthorised access 

and to make your systems as secure as 

possible, we recommend using a complex 

password or security code.

Managing connections

Press 

Connect-App

 to display the main 

page.

Press the "

OPTIONS

" button to access the 

secondary page.

Select "

Manage connection

". 

With this function, you can view the access to 

connected services, check the availability of 

connected services and change the connection 

mode.

Radio

Selecting a station

Press 

Radio Media

 to display the main 

page.

Press on "

Frequency

".

Press one of the buttons to perform an 

automatic search for radio stations.

Or

Move the slider to manually search for 

frequencies up or down.

Or

Press 

Radio Media

 to display the main 

page.

Press the "

OPTIONS

" button to go to the 

secondary page.

Select "

Radio stations

" on the secondary 

page.

Press on "

Frequency

".

Enter the values using the virtual keypad.

First enter the units then click on the 

decimals field to enter the figures after the 

decimal point.

138

CITROËN Connect Nav

Press "

OK

" to confirm.

 

Radio reception may be affected by the 

use of electrical equipment not approved 

by the Brand, such as a USB charger 

connected to the 12 V socket.

The exterior environment (hills, buildings, 

tunnels, basement car parks, etc.) may 

block reception, including in RDS mode. 

This phenomenon is perfectly normal in the 

context of radio wave transmission, and 

in no way indicative of an audio system 

malfunction.

Presetting a station

Select a radio station or frequency.

(refer to the corresponding section)

Press "

Presets

".

Make a long press on one of the buttons 

to preset the station.

Activating/Deactivating RDS

Press 

Radio Media

 to display the main 

page.

Press the "

OPTIONS

" button to access the 

secondary page.

Select "

Radio settings

". 

Select "

General

".

Activate/deactivate "

Station follow

". 

Press "

OK

" to confirm.

 

RDS, if activated, allows you to continue 

listening to the same station by 

automatically retuning to alternative 

frequencies. However, in certain conditions, 

RDS station tracking may not be possible 

nationwide, as radio stations do not always 

cover the entire country. This can explain the 

loss of reception of a station during a journey.

Displaying text information

The "Radio Text" function displays 

information transmitted by the radio 

station relating to the station or the currently 

playing song.

Press 

Radio Media

 to display the main 

page.

Press the "

OPTIONS

" button to access the 

secondary page.

Select "

Radio settings

". 

Select "

General

".

Activate/deactivate "

Display radio text

". 

Press "

OK

" to confirm.

 

Play TA messages

The TA (Traffic Announcement) function 

gives priority to TA alert messages. To 

operate, this function needs good reception of 

a radio station that carries this type of 

message. While traffic information is being 

broadcast, the current media is automatically 

interrupted so that the TA message can be 

heard. Normal play of the media previously 

playing is resumed at the end of the 

message.

Select "

Announcements

".

Activate / Deactivate "

Traffic 

announcement

".

Press "

OK

" to confirm.

 

DAB (Digital Audio 

Broadcasting) radio

Terrestrial Digital Radio

Digital radio provides higher quality 

reception.

The various "multiplexes/ensembles" offer 

a choice of radio stations organised in 

alphabetical order.

Press 

Radio Media

 to display the main 

page.

139

CITROËN Connect Nav

12

Select the audio source. 

Press "

Band

" to select the "

DAB

" waveband.

FM-DAB tracking

“DAB" does not cover 100% of the 

country.

When the digital radio signal is poor, 

“FM-DAB  auto tracking" enables you to 

continue listening to the same station by 

automatically switching to the corresponding 

FM analogue station (if there is one).

Press 

Radio Media

 to display the main 

page.

Press the "

OPTIONS

" button to access the 

secondary page.

Select "

Radio settings

". 

Select "

General

".

Activate/deactivate "

Station follow

". 

Press on "

OK

". 

If “FM-DAB auto tracking" is activated, 

there may be a time lag of a few seconds 

when the system switches to "FM" analogue 

radio, and in some cases a change in volume.

When the digital signal quality is restored, the 

system automatically changes back to "DAB".

If the "DAB" station being listened to is 

not available on “FM” (“

FM-DAB

" greyed 

out), or "FM-DAB auto tracking" is not 

activated, the sound will cut out while the 

digital signal is too weak.

Media

USB socket

Insert the USB memory stick into the USB 

socket or connect the USB device to the 

USB socket using a suitable cable (not supplied).

To protect the system, do not use a USB 

hub.

The system builds playlists (in temporary 

memory); this operation can take from a 

few seconds to several minutes at the first 

connection.

Reduce the number of non-music files and the 

number of folders to reduce the waiting time.

The playlists are updated every time the ignition 

is switched off or a USB memory stick is 

connected. The lists are memorised: if they are 

not modified, the subsequent loading time will 

be shorter.

Auxiliary socket (AUX)

(depending on model / depending on equipment)

Connect a portable device (MP3 player, 

etc.) to the auxiliary jack socket using an 

audio cable (not supplied).

This source is only available if "Auxiliary input" 

has been selected in the audio settings.

First adjust the volume on your portable device 

(to a high level). Then adjust the volume on your 

audio system.

Controls are managed via the portable device.

CD player

(depending on model / depending on equipment)

Insert the CD in the player.

Selecting the source

Press 

Radio Media

 to display the main 

page.

Select "

Source

". 

Select the source.

Bluetooth

®

 audio streaming

Streaming allows you to listen to music from your 

smartphone.

The Bluetooth profile must be activated, first 

adjust the volume on your portable device (to a 

high level).

Then adjust the volume of your audio system.

If play does not start automatically, it may be 

necessary to start the audio playback from the 

telephone.

Control is from the portable device or by using 

the system's touch buttons.

140

CITROËN Connect Nav

Once connected in streaming mode, the 

telephone is considered to be a media 

source.

Connecting Apple

®

 players

Connect the Apple

®

 player to the USB port using 

a suitable cable (not supplied).

Play starts automatically.

Control is via the audio system.

The classifications available are those of 

the portable device connected (artists / 

albums / genres / playlists / audiobooks / 

podcasts).

The default classification used is by artists. 

To modify the classification used, return to the 

first level of the menu then select the desired 

classification (playlists for example) and 

confirm to go down through the menu to the 

desired track.

The version of software in the audio system may 

not be compatible with the generation of your 

Apple

 ®

 player.

Information and advice

The system supports USB mass storage 

devices, BlackBerry

®

 devices or Apple

®

 

players via USB ports. The adapter cable is 

not supplied.

Device management is done by the audio 

system controls.

Other peripherals, not recognised on 

connection, must be connected to the 

auxiliary socket using a Jack cable (not 

supplied) or via Bluetooth streaming, 

depending on compatibility.

To protect the system, do not use a USB 

hub.

The audio equipment will only play audio files 

with ".wma", ".aac", ".flac", ".ogg" and ".mp3" 

file extensions and with a bit rate of between 32 

Kbps and 320 Kbps.

It also supports VBR (Variable Bit Rate) mode.

No other file types (".mp4", etc.) can be read.

Files of the ".wma" type should be to the wma 9 

standard.

The sampling rates supported are 32, 44 and 

48 kHz.

It is advisable to restrict file names to 20 

characters, without using special characters (e.g. 

" " ? . ; ù) so as to avoid any reading or display 

problems.

Use only USB keys in FAT32 format (File 

Allocation Table).

It is recommended that the original USB 

cable for the portable device is used.

In order to be able to play a burned CDR or 

CDRW, select standards ISO 9660 level 1, 2 or 

Joliet if possible when burning the CD.

If the disc is burned in another format, it may not 

be played correctly.

It is recommended that the same burning 

standard is always used on an individual disc, 

with the lowest speed possible (4x maximum) for 

the best acoustic quality.

In the particular case of a multi-session CD, the 

Joliet standard is recommended.

Telephone

Pairing a Bluetooth

®

 

telephone

As a safety measure and because it 

requires sustained attention by the driver, 

the pairing of a Bluetooth mobile telephone 

with the Bluetooth hands-free system of your 

audio system must be done with the 

vehicle 

stationary

 and the ignition on.

Activate the Bluetooth function on the 

telephone and ensure that it is "visible to 

all" (telephone configuration).

Procedure from the telephone

Select the system name in the list of 

devices detected.

In the system, accept the connection request 

from the telephone.

To complete the pairing, whichever 

procedure used (from the telephone or 

141

CITROËN Connect Nav

12

from the system), ensure that the code is the 

same in the system and in the telephone.

Procedure from the system

Press 

Telephone

 to display the main 

page.

Press "

Bluetooth search

". 

Or

Select "

Search

".

The list of telephones detected is 

displayed.

If the pairing procedure fails, we 

recommend deactivating and then 

reactivating the Bluetooth function on your 

telephone.

Select the name of the chosen telephone 

in the list.

Connection sharing

The system offers to connect the telephone with 

3 profiles:

– "

Telephone

" (hands-free kit, telephone only),

– "

Streaming

" (streaming: wireless playing of 

the audio files on the telephone),

– "

Mobile internet data

".

Activation of the profile; "

Mobile internet 

data

" is obligatory for connected 

navigation having first activated sharing of 

this connection on your smartphone.

Select one or more profiles.

 

Press "

OK

" to confirm.

 

Depending on the type of telephone, you 

may be asked to accept or not the 

transfer of your contacts and messages.

Automatic reconnection

On return to the vehicle, if the last 

telephone connected is present again, it 

is automatically recognised and within about 

30 seconds of switching on the ignition, the 

pairing is established without any action on 

your part (with Bluetooth activated).

To modify the connection profile:

Press 

Telephone

 to display the main 

page.

Press the "

OPTIONS

" button to go to the 

secondary page.

Select "

Bluetooth connection

" to display 

the list of paired devices.

Press the "Details" button. 

Select one or more profiles.

 

Press "

OK

" to confirm.

 

The ability of the system to connect just 

one profile depends on the telephone.

By default, all three profiles are able to 

connect.

The services available depend on the 

network, the SIM card and the 

compatibility of the Bluetooth devices used. 

Refer to your telephone’s user guide and your 

service provider to check which services you 

are able to access.

The system supports the following 

profiles: HFP, OPP, PBAP, A2DP, AVRCP, 

MAP and PAN.

Visit the Brand's website for more information 

(compatibility, additional help, etc.).

Managing paired telephones

This function lets you connect or 

disconnect a device or delete a pairing.

Press 

Telephone

 to display the main 

page.

Press the "

OPTIONS

" button to go to the 

secondary page.

Select "

Bluetooth connection

" to display 

the list of paired devices.

Press on the name of the telephone 

selected in the list to disconnect it.

Press again to connect it.

142

CITROËN Connect Nav

Deleting a telephone

Select the basket at top right of the 

screen to display a basket alongside the 

telephone chosen.

Press the basket alongside the telephone 

chosen to delete it.

Receiving a call

An incoming call is announced by a ring and a 

superimposed display in the screen.

Make a short press on the steering 

mounted 

PHONE

 button to accept an 

incoming call.

And

Make a long press 

on the steering mounted 

PHONE

 button 

to reject the call.

Or

Select "

End call

". 

Making a call

Using the telephone is not recommended 

while driving.

Park the vehicle.

Make the call using the steering mounted 

controls.

Calling a new number

Press 

Telephone

 to display the main 

page. 

Enter the number using the digital 

keypad.

Press "

Call

" to start the call. 

Calling a contact

Press 

Telephone

 to display the main 

page.

Or press and hold 

on the steering-mounted 

TEL

 button. 

Select "

Contact

".

Select the desired contact in the displayed list.

Select "

Call

". 

Calling a recently used 

number

Press 

Telephone

 to display the main 

page.

Or

Press and hold 

on the steering-mounted button. 

Select "

Calls

".

Select the desired contact in the displayed list.

It is always possible to make a call 

directly from the telephone; as a safety 

measure, first park the vehicle.

Managing contacts/entries

Press 

Telephone

 to display the main 

page.

Select "

Contact

".

Select "

Create

" to add a new contact. 

In the "

Telephone

" tab, enter the telephone 

numbers for the contact.

In the "

Address

" tab, enter the addresses for the 

contact.

In the "

Email

" tab, enter the email addresses for 

the contact.

The "

Email

" function allows email 

addresses to be entered for a contact, 

but the system is not able to send emails.

Managing messages

Press 

Telephone

 to display the main 

page.

Press the "

OPTIONS

" button to go to the 

secondary page.

Select "

Messages

" to display the list of 

messages.

Select the "

All

", "

Incoming

" or "

Sent

” 

tab.

Select the details of the message chosen 

in one of the lists.

143

CITROËN Connect Nav

12

Press "

Answer

" to send a quick message 

stored in the system.

Press "

Call

" to start a call. 

Press "

Play

" to listen to the message. 

Access to "

Messages

" depends on the 

compatibility between the smartphone 

and the onboard system.

Depending on the smartphone, access to 

your messages or email may be slow.

The services available depend on the 

network, the SIM card and the 

compatibility of the Bluetooth devices used. 

Refer to your smartphone manual and your 

service provider to check which services are 

available to you.

Managing quick messages

Press 

Telephone

 to display the main 

page.

Press the "

OPTIONS

" button to go to the 

secondary page.

Select "

Quick messages

" to display the 

list of messages.

Select the "

Delayed

", "

My arrival

", "

Not 

available

" or "

Other

" tab, enabling you to 

create new messages.

Press "

Create

" to write a new message. 

Select the message chosen in one of the 

lists.

Press "

Transfer

" to select one or more 

recipients.

Press "

Play

" to start playing the message. 

Managing email

Press 

Telephone

 to display the main 

page.

Press the "

OPTIONS

" button to go to the 

secondary page.

Select "

Email

" to display the list of 

messages.

Select the "

Incoming

", "

Sent

" or "

Not 

read

” tab.

Select the message chosen in one of the lists.

Press "

Play

" to start playing the message. 

Access to "

Email

" depends on the 

compatibility between the smartphone 

and the onboard system.

Settings

Audio settings

Press 

Settings

 to display the main page. 

Select "

Audio settings

". 

Select "

Ambience

".

Or

"

Position

".

Or

"

Sound

".

Or

"

Voice

".

Or

"

Ringtone

".

Press "

OK

" to save the settings. 

The balance/distribution (or spatialisation 

with the Arkamys

 system) uses audio 

processing to adjust the sound quality 

according to the number of passengers in the 

vehicle.

Available only with the front and rear speaker 

configuration.

The 

Ambience

 setting (choice of 6 

ambiances) as well as for 

Bass

, 

Medium

 

and 

Treble

 are different and independent for 

each audio source.

Activate or deactivate "

Loudness

".

The "

Position

” settings (All passengers, 

Driver and Front only) are common to all 

sources.

Activate or deactivate "

Touch tones

", 

"

Volume linked to speed

" and "

Auxiliary 

input

".

144

CITROËN Connect Nav

Onboard audio: Arkamys Sound Staging

 

optimises the sound balance/distribution 

inside the passenger compartment.

Configuring profiles

As a safety measure and because it 

requires the sustained attention of the 

driver, the operations must only be done with 

the 

vehicle stationary

.

Press 

Settings

 to display the main page. 

Press the "

OPTIONS

" button to access the 

secondary page.

Select "

Setting of the profiles

". 

Select "

Profile 1

", "

Profile 2

", "

Profile 3

” or 

"

Common profile

".

Press this button to enter a name for the 

profile using the virtual keypad.

Press "

OK

" to confirm.

 

Press this button to add a photograph to 

the profile.

Insert a USB memory stick containing the 

photograph in the USB socket.

Select the photograph.

Press "

OK

" to accept the transfer of the 

photograph.

Press "

OK

" again to save the settings. 

The location for the photograph is 

square; the system reshapes the original 

photograph if in another format.

Press this button to reset the selected 

profile.

Resetting the selected profile activates 

the English language by default.

Select a "

Profile

" (1 or 2 or 3) to link the "

Audio 

settings

" with it.

Select "

Audio settings

". 

Select "

Ambience

".

Or

"

Position

".

Or

"

Sound

".

Or

"

Voice

".

Or

"

Ringtone

".

Press "

OK

" to save the settings. 

Modifying system settings

Press 

Settings

 to display the main page. 

Press the "

OPTIONS

" button to access the 

secondary page.

Select "

Screen configuration

". 

Select "

Animation

".

Activate or deactivate: “

Automatic 

scrolling

”.

Select "

Brightness

".

Move the slider to adjust the brightness of 

the screen and/or the instrument panel.

Press 

Settings

 to display the main page. 

Press the "

OPTIONS

" button to access the 

secondary page.

Select "

System settings

". 

Select "

Units

" to change the units of distance, 

fuel consumption and temperature.

Select "

Factory settings

" to restore the initial 

settings.

Returning the system to factory settings 

activates the English language by 

default.

Select "

System info

" to display the versions of 

the various modules installed in the system.

Selecting the language

Press 

Settings

 to display the main page. 

Press the "

OPTIONS

" button to go to the 

secondary page.

Select "

Languages

" to change the 

language.

145

CITROËN Connect Nav

12

Setting the date

Press 

Settings

 to display the main page. 

Press the "

OPTIONS

" button to access the 

secondary page.

Select "

Setting the time-date

". 

Select "

Date

".

Press this button to set the date. 

Press "

OK

" to confirm.

 

Select the display format for the date. 

Time and date setting is only available if 

"GPS synchronisation" is deactivated.

The change between winter and summer time 

is made by changing the time zone.

Setting the time

Press 

Settings

 to display the main page. 

Press the "

OPTIONS

" button to access the 

secondary page.

Select "

Setting the time-date

". 

Select "

Time

".

Press this button to set the time using the 

virtual keypad.

Press "

OK

" to confirm.

 

Press this button to set the time zone. 

Select the display format for the time 

(12h/24h).

Activate or deactivate GPS 

synchronisation (UTC).

Press "

OK

" to confirm.

 

The system does not automatically 

manage the change between winter and 

summer time (depending on country).

Colour schemes

For safety reasons, the colour scheme 

can only be changed while the 

vehicle is 

stationary

.

Press 

Settings

 to display the main page. 

Select "

Color schemes

". 

Select a colour scheme in the list then 

press "

OK

" to confirm.

Whenever the colour scheme is 

changed, the system restarts, temporarily 

displaying a black screen.

Frequently asked 

questions

The following information groups together the 

answers to the most frequently asked questions 

concerning the system.

Navigation

I cannot enter the navigation address.

The address is not recognised.

►  Use the "intuitive method" by pressing 

the "Search…" button at the bottom of the 

"Navigation” page.

The route calculation is not successful.

The route settings may conflict with the current 

location (for example, if toll roads are excluded 

but the vehicle is on a toll road).

►  Check the route settings in the "Navigation" 

menu.

I do not receive "Danger zone” alerts.

You have not subscribed to the online services 

option.

►  If you have subscribed to the option:

- a few days may elapse before the service is 

activated,

- services may not be selected in the system 

menu,

- online services are not active ("TOMTOM 

TRAFFIC" not shown on the map).

The POIs do not appear.

The POIs have not been selected.

►  Set the zoom level to 600 ft (200 m) or select 

POIs in the POI list.