|
|
|
TCS Switch TCS Control Unit Test 1. Remove the TCS/CRUISE switch from the switch panel. Replacement TCS/CRUISE SWITCH 2. Check for continuity between terminal No. 1 and No. 2 (Illumination light circuit) and between termi- There should be continuity when the switch is pushed, and there should be no continuity when the 1. Remove the rear seat-back (see ). 2. Disconnect the connectors from TCS control unit. TCS CONTROL UNIT 3. Remove the three bolts and the TCS control unit. 4. Install in the reverse order of removal. Main Menu Table of Contents |