Kia Sedona (2008 year). Manual - part 128

Fig. 4: Identifying Brake Hose And Strut Assembly
Courtesy of KIA MOTORS AMERICA, INC.

4. Unstake the driveshaft lock nut using a chisel and hammer.

Fig. 5: Tapping Driveshaft Lock Nut
Courtesy of KIA MOTORS AMERICA, INC.

2008 Kia Sedona

2008 DRIVELINE/AXLES Front Axle - Sedona

Microsoft

Saturday, May 22, 2010 6:51:57 PM

Page 3

Fig. 6: Identifying Driveshaft Lock Nut
Courtesy of KIA MOTORS AMERICA, INC.

5. Remove the driveshaft lock nut (A).

Tightening torque N.m (kgf.m, lb-ft):

245-275 (24.5-27.5, 177-199)

Fig. 7: Identifying Driveshaft Lock Nut
Courtesy of KIA MOTORS AMERICA, INC.

6. Remove the caliper assembly (A) from the knuckle and suspend it with wire.

Tightening torque N.m (kgf, m, lb-ft):

85-100 (8.5-10.0, 61-72)

2008 Kia Sedona

2008 DRIVELINE/AXLES Front Axle - Sedona

Microsoft

Saturday, May 22, 2010 6:51:57 PM

Page 4

Fig. 8: Identifying Caliper Assembly And Bolts
Courtesy of KIA MOTORS AMERICA, INC.

Fig. 9: Suspending Caliper With Wire
Courtesy of KIA MOTORS AMERICA, INC.

7. Remove the split pin and castle nut from the tie rod end ball joint.

Tightening torque N.m (Kgf.m, lb-ft):

60-80 (6.0-8.0, 43-58)

2008 Kia Sedona

2008 DRIVELINE/AXLES Front Axle - Sedona

Microsoft

Saturday, May 22, 2010 6:51:57 PM

Page 5

Fig. 10: Identifying Split Pin And Castle Nut
Courtesy of KIA MOTORS AMERICA, INC.

8. Disconnect the tie rod end (A) from the knuckle using a SST (09568-4A000).

Fig. 11: Identifying Tie Rod End And Knuckle SST (09568-4A000)
Courtesy of KIA MOTORS AMERICA, INC.

9. Remove the split pin and lower arm bolt and nut (A).

Tightening torque N.m (Kgf.m, lb-ft):

90-120 (9.0-12.0, 65-87)

2008 Kia Sedona

2008 DRIVELINE/AXLES Front Axle - Sedona

Microsoft

Saturday, May 22, 2010 6:51:57 PM

Page 6