Chrysler Sebring, Stratus sedan, Sebring Convertible. Manual - part 688
REAR
(1) Partially raise convertible top.
(2) Remove push in fasteners attaching weather-
strip to retainer.
(3) Separate weatherstrip from vehicle (Fig. 26).
INSTALLATION
FRONT
(1) Position weatherstrip on vehicle.
(2) Install push in fasteners into retainer channel,
aligning embossment on back side of weatherstrip to
corner of retainer.
(3) Lower convertible top.
(4) Secure convertible top.
CENTER
(1) Position weatherstrip on vehicle.
(2) Install push in fasteners into retainer channel,
aligning embossment on back side of weatherstrip to
corner of retainer.
(3) Lower convertible top.
(4) Secure convertible top.
REAR
(1) Position weatherstrip on vehicle.
(2) Install push in fasteners into retainer channel,
aligning embossment on back side of weatherstrip to
corner of retainer.
(3) Push weatherstrip into retainer channel, align-
ing embossment on backside of weatherstrip to cor-
ner of retainer.
(4) Lower convertible top.
(5) Secure convertible top.
Fig. 26 Rear Side Rail
1 - CONVERTIBLE TOP
2 - REAR SIDE RAIL WEATHERSTRIP
3 - QUARTER PANEL
JR
WEATHERSTRIP/SEALS
23 - 149
SIDE RAIL WEATHERSTRIP (Continued)