Volvo XC40 (2021 year). Manual in english - page 8

DISPLAYS AND VOICE CONTROL

* Option/accessory.

142

Voice control for radio and media

20

Voice commands for the radio and media
players are shown below.

Tap 

 and say one of the following com-

mands:

•

"

Media

" - initiates a dialog for media and

radio and displays examples of com-
mands.

•

"

Play

 

[artist]

" - plays music by the

selected artist.

•

"

Play

 

[song title]

" - plays the selected

song.

•

"

Play

 

[song title]

 

from

 

[album]

" - plays

the selected song from the selected
album.

•

"

Play

 

[radio station]

" - starts the

selected radio station.

•

"

Tune to [frequency]

" - tunes to the

selected radio frequency in the currently
active waveband. If no radio source is
active, the FM band will be started as
default.

•

"

Tune to [frequency]

 

[waveband]

" -

tunes to the selected radio frequency on
the selected waveband.

•

"

Radio

" - starts FM radio.

•

"

Radio FM

" - starts FM radio.

•

"

Radio AM

" - starts AM radio.

•

"

SiriusXM

" - starts SiriusXM radio

*

•

"

USB

" - starts playback from USB.

•

"

iPod

" - starts playback from iPod.

•

"

Bluetooth

" - starts playback from a

Bluetooth-connected media source.

•

"

Similar music

" - plays music from a

USB-connected device with music similar
to that currently playing.

NOTE

Not all system languages support voice
control. If a language supports voice con-
trol, it is marked with a 

 symbol in the

list of available system languages. Read
more about where the information is found
in the section on voice control settings.

Related information

•

Voice Control (p. 138)

•

Use voice recognition (p. 139)

•

Voice control for cellular phones (p. 141)

•

Climate control system voice commands
(p. 192)

•

Voice control settings (p. 142)

Voice control settings

21

Settings for the voice control system are
made here.

Settings

System

Voice Control

Settings can be personalized in the following
areas:

•

Repeat Voice Command

•

Gender

•

Speech Rate

Sound settings

Select sound settings under:

Settings

Sound

System Volumes

Voice Control

Language settings

The voice control system is not available for all
languages. The languages available for voice
commands are indicated by the 

 icon in

the list of languages.

Changing the language here will also change
the language in the menus, messages and
help texts.

Settings

System

System Languages

and Units

System Language

20

Certain markets only.

21

Certain markets only.

DISPLAYS AND VOICE CONTROL

143

Related information

•

Voice Control (p. 138)

•

Use voice recognition (p. 139)

•

Voice control for cellular phones (p. 141)

•

Climate control system voice commands
(p. 192)

•

Voice control for radio and media (p. 142)

•

Sound settings (p. 428)

•

Changing system language (p. 128)

LIGHTING

* Option/accessory.

146

Lighting control and panel

The lighting panel and controls can be used
to adjust both exterior and interior lighting.
The lighting ring on the left-side steering
wheel lever can be used to activate and
adjust the exterior lighting. The brightness of
the interior lighting can be adjusted using the
thumb wheel on the dashboard.

Exterior lighting

Lighting ring position.

When the vehicle's ignition is in mode 

II

, the

lighting ring positions have the following func-
tions:

Position Meaning

US: Daytime running lights and
parking lights are off.

Canada: Daytime running lights
and parking lights are on.

High beam flash can be used.

Parking lights when the vehicle
is parked.

US: Daytime running lights are
off.

Canada: Daytime running lights
are on.

High beam flash can be used.

Low beams and parking lights.

High beams can be activated.

High beam flash can be used.

Position Meaning

Daytime running lights and
parking lights in daylight condi-
tions.

A

Low beams and parking lights in
weak daylight or dark conditions
or when the front fog lights

*

and/or rear fog light are acti-
vated.

Active high beam can be acti-
vated.

High beams can be activated
when low beams are on.

High beam flash can be used.

Active high beams on/off.

A

US models only: Daytime running lights and parking lights

can be deactivated in the center display.

NOTE

Volvo recommends use of Daytime
Running Lights in the US. Its use is man-
datory in Canada.

Volvo recommends using position 

 when

the vehicle is in motion.

LIGHTING

* Option/accessory.

147

WARNING

The vehicle lighting system cannot in all sit-

uations determine when the daylight is too

weak or not strong enough, e.g. when

there is fog or rain.
The driver is always responsible for driving

the vehicle with lighting that is safe for the

traffic conditions and as specified by appli-

cable traffic regulations.

Thumbwheel in instrument panel

Thumb wheel (to the left) for adjusting interior bright-

ness.

Related information

•

Adjusting light functions via the center
display (p. 147)

•

Interior Lighting (p. 156)

•

Parking lights (p. 148)

•

Using turn signals (p. 152)

•

Using high beam (p. 150)

•

Low beams (p. 149)

•

Front fog lights/corner illumination

*

(p. 153)

•

Rear fog light (p. 154)

•

Active Bending Lights

*

 (p. 152)

•

Brake lights (p. 155)

•

Emergency brake lights (p. 155)

•

Hazard warning flashers (p. 155)

Adjusting light functions via the

center display

A number of light functions can be adjusted
and activated via the center display. These
include active high beams, home safe lighting
and approach lighting.

1. Tap 

Settings

 in the center display's Top

view.

2. Tap 

My Car

Lights and Lighting

.

3. Select 

Exterior Lights

 or 

Interior

Lighting

 and then select the function that

you would like to adjust.

Related information

•

Lighting control and panel (p. 146)

•

Active high beam (p. 151)

•

Using home safe lighting (p. 156)

•

Welcome Light (p. 156)

•

Using turn signals (p. 152)

•

Changing settings in the center display's
Top view (p. 128)

•

Function view in the center display (p. 118)

LIGHTING

* Option/accessory.

148

Parking lights

The parking lights can be used to help other
road users see the vehicle if it is stopped or
parked. Use the lighting ring on the steering
wheel lever to turn on the parking lights.

Lighting ring in the parking light position.

Turn the lighting ring to the 

 position to

turn on the parking lights (the license plate
lighting will also illuminate).

Canadian models:

 If the ignition is in the 

II

position, the daytime running lights will illumi-
nate instead of the front parking lights. With
the lighting ring in this position, the parking
lights will remain on regardless of what posi-
tion the ignition is in.

US models:

 When 

 mode is selected,

the daytime running lights can be deactivated
in the center display. The parking lights will
also be deactivated. In weak daylight or dark

conditions, the parking lights and low beams
will be illuminated.

In dark conditions, the rear parking lights also
illuminate when the tailgate is opened to alert
following traffic. This happens regardless of
what position the lighting ring or ignition is in.

Related information

•

Lighting control and panel (p. 146)

•

Ignition modes (p. 372)

Daytime running lights

The vehicle has sensors that detect ambient
lighting conditions. With the lighting ring in
the 

 position, the daytime running lights

will always be activated when the ignition is
in mode 

II

. In weak daylight or dark condi-

tions, the headlights automatically switch to
low beams.

Lighting ring in 

AUTO

 position.

With the steering wheel lever's lighting ring in
the 

 position, the daytime running lights

(DRL

1

) will illuminate when the vehicle is

driven in daylight conditions. The headlights
will switch automatically from daytime run-
ning lights to low beams in weak daylight or
dark conditions. The headlights will also
switch to low beams if the front fog lights

*

and/or rear fog light are activated.

LIGHTING

}}

* Option/accessory.

149

US models

: When 

 mode is selected,

the daytime running lights can be deactivated
in the center display. The parking lights will
also be deactivated. In weak daylight or dark
conditions, the parking lights and low beams
will be illuminated.

US models

: With the lighting ring in the 

or 

 position, the daytime running lights

will be 

off

.

Canadian models

: With the lighting ring in

the 

 or 

 position, the daytime run-

ning lights will be on.

NOTE

Volvo recommends use of Daytime
Running Lights in the US. Its use is man-
datory in Canada.

WARNING

The system is an energy saving aid – it

cannot in all situations determine when the

daylight is too weak or not strong enough,

e.g. when there is fog or rain.
The driver is always responsible for driving

the vehicle with lighting that is safe for the

traffic conditions and as specified by appli-

cable traffic regulations.

Related information

•

Lighting control and panel (p. 146)

•

Ignition modes (p. 372)

•

Low beams (p. 149)

Low beams

When driving with the lighting ring in the

 position, low beam will be automati-

cally activated in weak daylight or dark condi-
tions, when the ignition is in the 

II

 position.

Lighting ring in 

AUTO

 position.

With the lighting ring in the 

 position, the

low beams will be automatically activated if:

•

the front fog lights

*

 are activated

•

the rear fog light is activated

•

the rear and front fog lights are activated.

With the lighting ring in the 

 position,

low beams will always be on when the ignition
is in the 

II

 position.

1

Daytime Running Lights

||

LIGHTING

150

Tunnel detection

The vehicle will detect if it enters a tunnel and
shift from daytime running lights to low
beams.

Note that the left-hand steering wheel lever
must be in 

 position for tunnel detection

to work.

Related information

•

Lighting control and panel (p. 146)

•

Ignition modes (p. 372)

•

Daytime running lights (p. 148)

Using high beam

High beam is operated via the left-hand
steering wheel lever. High beam is the vehi-
cle's strongest lighting and should be used
when driving in dark conditions, provided it
does not blind other road users, to improve
visibility.

Steering wheel lever with lighting ring.

High beam flash

Move the steering wheel lever slightly
backward to the high beam flash mode.
The high beams will illuminate until the
lever is released.

High beams

The high beams can be activated when
the lighting ring is in mode 

2

 or

. Activate high beams by moving the

steering wheel lever forward.
Deactivate by moving the steering wheel
lever backward.

When the high beams are activated, the 
symbol will be illuminated in the instrument
panel.

Related information

•

Lighting control and panel (p. 146)

•

Active high beam (p. 151)

2

When the low beams are on.

LIGHTING

151

Active high beam

Active high beams is a function that uses
camera sensors in the upper edge of the
windshield to detect the headlights of
approaching vehicles or the taillights of the
vehicle directly ahead. When either of these
is detected, the vehicle's headlights will auto-
matically switch from high beams to low
beams.

Active high beams is indicated by the 

 symbol.

This function can be used in dark conditions
when the vehicle's speed is approx. 20 km/h
(approx. 12 mph) or higher. The function can
also detect street lighting. When the camera
sensor no longer detects an approaching vehi-
cle or a vehicle ahead, the headlights will
return to high beams after a second or two.

Activating active high beams

Active high beams can be activated and deac-
tivated by turning the lighting ring on the left-
side steering wheel lever to position 

.

The lighting ring will then return to 

.

When active high beams are activated, a white

 symbol will be displayed in the instru-

ment panel. When high beams are on, the
symbol will be blue.

If active high beams are deactivated when the
high beams are on, the headlights will auto-
matically switch to low beams.

Limitations for active high beams

The camera sensor on which the function is
based has limitations.

If this symbol and the message

Active High Beam

 

Temporarily

unavailable

 is displayed in the

instrument panel, switching

between high and low beams must be done
manually. The 

 symbol will go out when

the message is displayed.

The same applies if this symbol
along with the message

Windscreen sensor

 

Sensor

blocked, see Owner's manual

 is

displayed.

Active high beams may be temporarily unavail-
able in certain situations, e.g. heavy fog or

rain. When active high beams become availa-
ble again, or the windshield sensors are no
longer blocked, the message will disappear
and the 

 symbol will be displayed.

WARNING

Automatic high beam is an aid in using the

best possible light based on prevailing con-

ditions.
The driver is always responsible for man-

ually switching between high and low

beam when traffic situations or weather

conditions require this.

Related information

•

Lighting control and panel (p. 146)

•

Using high beam (p. 150)

•

Camera/radar sensor limitations (p. 362)

LIGHTING

* Option/accessory.

152

Using turn signals

The vehicle's turn signals are controlled using
the left-side steering wheel lever. The turn
signals flash three times or continuously,
depending on how far up or down the lever is
moved.

Turn signals.

Triple flash indicator

Move the steering wheel lever up or down
to the first position and release. The turn
signals will flash three times. If the func-
tion is deactivated via the center display,
the signals will flash once.

NOTE

•

This automatic flashing sequence can
be interrupted by immediately moving
the lever in the opposite direction.

•

If the turn signal indicator flashes more
quickly than normal, refer to the mes-
sage in the instrument panel.

Continuous flashing sequence

Move the lever up or down as far as possi-
ble.

The lever will stop in its end position and can
be moved back manually or automatically by
moving the steering wheel.

Related information

•

Hazard warning flashers (p. 155)

•

Adjusting light functions via the center
display (p. 147)

•

Replacing rear turn signal bulbs (p. 585)

Active Bending Lights

*

Active Bending Lights (ABL) are designed to
help provide extra illumination in curves and
intersections. Depending on equipment level,
vehicles with LED

3

 headlights

*

 may be equip-

ped with Active Bending Lights.

Headlight pattern with function deactivated (left) and

activated (right).

Active Bending Lights follow the movement of
the steering wheel to help provide extra illumi-
nation in curves and intersections, helping to
improve visibility for the driver.

The function is automatically activated when
the engine is started. If a fault is detected in
the system, the 

 symbol will illuminate in

the instrument panel and a message will be
displayed.

3

LED (Light Emitting Diode)

LIGHTING

}}

* Option/accessory.

153

The function is only active in weak daylight or
dark conditions and only when the vehicle is
moving and the low beams are on.

Deactivating/activating the function

The function is activated as the default factory
setting and can be activated and deactivated
in the center display's Function view:

Tap the 

Active Bending

Lights

 button.

Related information

•

Adjusting light functions via the center
display (p. 147)

•

Front fog lights/corner illumination

*

(p. 153)

Front fog lights/corner

illumination

*

The fog lights can be activated manually
when driving in fog and are activated auto-
matically when backing up to help augment
the backup light.

If the vehicle is equipped with corner illumi-
nation

*

, the fog lights are activated automati-

cally in weak daylight or dark conditions to
illuminate the area diagonally in front of the
vehicle.

Front fog lights button.

The front fog lights can be turned on when the
ignition is in mode 

II

 and the lighting ring is in

position 

, 

 or 

.

Tap the button to activate or deactivate the
function. The 

 symbol in the instrument

panel comes on when the front fog lights are
on.

The front fog lights turn off automatically
when the ignition is switched off or when the
lighting ring is in position 

.

NOTE

Regulations concerning fog light use vary
from country to country.

Cornering illumination

*

The front fog lamps can include the cornering
lights function, which temporarily illuminates
the area diagonally in front of the car in the
direction the steering wheel is turned on a
sharp bend, or in the direction shown by the
direction indicators.

The function is activated in weak daylight or
dark conditions when the lighting ring is in

 or 

 mode and the vehicle speed is

less than about 30 km/h (about 20 mph).

Both cornering illumination are also illumi-
nated as a complement to the taillights when
reversing.

The function is activated as the default factory
setting and can be activated and deactivated
using the center display.

Related information

•

Lighting control and panel (p. 146)

•

Ignition modes (p. 372)

•

Rear fog light (p. 154)

LIGHTING

* Option/accessory.

154

•

Active Bending Lights

*

 (p. 152)

•

Adjusting light functions via the center
display (p. 147)

Rear fog light

The rear fog light is considerably brighter
than ordinary taillights and should only be
used to help other road users see the vehicle
when visibility is reduced by conditions such
as fog, snow, smoke or dust.

Rear fog light button.

The fog lights are located on the right and left
sides of the rear of the vehicle.

The rear fog light can only be used when:

•

ignition mode 

II

 is active and the lighting

ring is in position 

 or 

•

the lighting ring is in the 

 position

and the front fog lights are on.

Press the button to switch on/off. The 
symbol in the instrument panel illuminates
when the rear fog light is on.

The rear fog light turns off automatically when:

•

the ignition is off or the lighting ring is in
the 

 position.

•

the lighting ring is in the 

 position

and the front fog lights are turned off.

NOTE

Regulations concerning rear fog light use
vary from country to country.

Related information

•

Lighting control and panel (p. 146)

•

Front fog lights/corner illumination

*

(p. 153)

•

Ignition modes (p. 372)

•

Replacing the rear fog light bulb (p. 588)

LIGHTING

155

Brake lights

The brake lights are automatically illuminated
when braking.

The brake lights are illuminated when the
brake pedal is depressed and when the brakes
are automatically applied by a driver support
system.

Related information

•

Emergency brake lights (p. 155)

•

Brake functions (p. 374)

•

Replacing the brake light bulb (p. 587)

•

Driver support systems (p. 254)

Emergency brake lights

The emergency brake lights are activated to
warn following vehicles of hard braking.

This function causes an additional taillight on
each side of the vehicle to illuminate.

The emergency brake lights are activated in
the event of hard braking or if the ABS system
is activated and the vehicle is traveling at a
high speed.

After the driver decelerates to a low speed and
then releases the brake, the brake lights
resume their normal brightness.

Related information

•

Brake lights (p. 155)

•

Brakes (p. 375)

•

Hazard warning flashers (p. 155)

Hazard warning flashers

Hazard warning flashers warn other road
users by all of the vehicle's turn signals being
activated at the same time. The function can
be used to warn about a traffic hazard.

Hazard warning flashers button.

Press the button to activate the hazard warn-
ing flashers.

NOTE

Regulations concerning the use of hazard
warning flashers may vary from country to
country.

Related information

•

Emergency brake lights (p. 155)

•

Using turn signals (p. 152)

LIGHTING

* Option/accessory.

156

Using home safe lighting

Some of the exterior lights remain on to illu-
minate the area around the vehicle. This is
called home safe lighting.

To activate home safe lighting:

1. Switch off the ignition.

2. Push the left-side steering wheel lever

toward the dashboard and release.

3. Exit the vehicle and lock the doors.

> A symbol in the instrument panel illumi-

nates to indicate that the function is
activated and exterior lighting switches
on: Parking lights, headlights, license
plate lighting and outer door handle
lighting

*

.

The length of time home safe lighting remains
illuminated can be set in the center display.

Related information

•

Adjusting light functions via the center
display (p. 147)

•

Welcome Light (p. 156)

Welcome Light

Approach lighting is activated when the vehi-
cle is unlocked and can be used to provide
light as you walk toward the vehicle.

The function is activated when the remote key
is used for unlocking. The parking lights, ceil-
ing lights, footwell lights and trunk/cargo
compartment lights are activated in daylight
conditions. In weak daylight or dark condi-
tions, the license plate lighting and outer door
handle lighting

*

 will also be activated, with the

light directed toward the ground.

If no door is opened, the lights will remain illu-
minated for approx. 2 minutes. If a door is
opened while the function is activated, the
interior lighting and outer door handle lighting

*

will remain on for a longer period of time.

This function can be activated and deactivated
in the center display.

Related information

•

Adjusting light functions via the center
display (p. 147)

•

Using home safe lighting (p. 156)

•

Remote key (p. 222)

Interior Lighting

The passenger compartment is equipped
with several different types of lighting, e.g.
general lighting, adjustable ambient lighting
and reading lights.

All lighting in the passenger compartment can
be turned on and off manually within
5 minutes after:

•

the engine has been switched off and the
ignition is in mode 

0

.

•

the vehicle is unlocked but has not been
started.

Front ceiling lighting

The controls in the ceiling console for the front read-

ing lights and courtesy lighting.

Reading light left side

Passenger compartment lighting

LIGHTING

}}

* Option/accessory.

157

Courtesy lighting auto switch

Reading light right side

Reading lights

The reading lights on the right and left sides
are switched on and off by briefly pressing the
buttons in the ceiling console. To adjust the
brightness, press and hold the button.

Passenger compartment lighting

Briefly press the button in the ceiling console
to switch on or off the footwell lighting and
ceiling lighting.

Courtesy lighting auto switch

Activate the auto switch by briefly pressing
the 

AUTO

 button in the ceiling console. With

Auto activated, the indicator light in the button
and the courtesy lighting come on and are
turned off as follows.

Courtesy lighting is switched on when:

•

The vehicle is unlocked

•

The vehicle is switched off

•

A side door is opened.

Courtesy lighting is switched off when:

•

The vehicle is locked

•

The engine is started

•

A side door is closed

•

A side door has been open for approx.
2 minutes.

Rear roof lighting

*

Reading lights are located in the rear section
of the vehicle and can also be used as passen-
ger compartment lighting.

Reading lights over the rear seat.

In vehicles with panoramic roofs

*

, there are two lamp

units, one on each side of the ceiling.

Briefly press the button on the light to turn on
or off the reading lights. To adjust the bright-
ness, press and hold the button.

Glove compartment lighting

The glove compartment lighting comes on or
goes off when the glove compartment is
opened or closed.

Vanity mirror lighting

*

The vanity mirror lighting comes on or goes off
when the cover over the mirror is opened or
closed.

Ground lighting

*

The ground lighting comes on or goes off
when a door is opened or closed.

Cargo compartment lighting

The cargo compartment lighting comes on or
goes off when the cargo compartment is
opened or closed.

Ambient Lighting

The ambient lighting comes on when the
doors are opened and goes out when the vehi-
cle is locked. Ambient lighting brightness can
be adjusted in the center display and also fine-
tuned using the thumb wheel in the dash-
board.

Mood lighting

*

The vehicle is equipped with LEDs that pro-
vide faint lighting in various colors. This light-
ing is on when the engine is running. Mood

||

LIGHTING

* Option/accessory.

158

lighting can be adjusted in the center display
and also fine-tuned using the thumb wheel in
the dashboard.

Lighting in the door storage
compartments

Lighting in the door storage compartments
comes on when the doors are opened and
goes out when the vehicle is locked. The
brightness can be adjusted using the thumb
wheel in the dashboard.

Lighting in the tunnel console's front
cup holder

The lighting in front console cup holders
switches on when the vehicle is unlocked and
off when the vehicle is locked. The brightness
can be adjusted using the thumb wheel in the
dashboard.

Related information

•

Adjusting interior lighting (p. 158)

•

Lighting control and panel (p. 146)

•

Ignition modes (p. 372)

•

Passenger compartment interior (p. 532)

Adjusting interior lighting

Illumination in the vehicle varies depending
on ignition mode. The interior lighting can be
adjusted with a thumb wheel in the dash-
board and certain light functions can also be
adjusted via the center display.

The thumb wheel on the
dashboard to the left of the
steering wheel can be used
to adjust the brightness of
the display lighting, instru-
ment lighting, ambient light-
ing and mood lighting

*

.

Adjust ambient decor lighting

1. Tap 

Settings

 in the Top view in the center

display.

2. Tap 

My Car

Lights and Lighting

Interior Lighting

.

3. Choose from among the following set-

tings:

•

Under 

Ambient Light Intensity

, select

Off

, 

Low

 or 

High

.

•

Under 

Ambient Light Level

, select

Reduced

 or 

Full

.

Adjusting mood lighting

*

The vehicle is equipped with several LEDs that
provide faint lighting in various colors. This
lighting is on when the engine is running.

Changing the brightness

1. Tap 

Settings

 in the Top view in the center

display.

2. Tap 

My Car

Lights and Lighting

Interior Lighting

Interior Mood

Lighting

.

3. Under 

Interior Mood Light Intensity

,

select 

Off

, 

Low

 or 

High

.

Changing the color of the light

1. Tap 

Settings

 in the Top view in the center

display.

2. Tap 

My Car

Lights and Lighting

Interior Lighting

Interior Mood

Lighting

.

3. Choose 

By Temperature

 or 

By Color

 to

change the color of the light.

If 

By Temperature

 is selected, the light

will change according to the temperature
set for the passenger compartment.

If 

By Color

 is selected, the subcategory

Theme Colors

 can be used to make fur-

ther adjustments.

Related information

•

Interior Lighting (p. 156)

•

Adjusting light functions via the center
display (p. 147)

•

Ignition modes (p. 372)

WINDOWS, GLASS AND MIRRORS

* Option/accessory.

160

Windows, glass and mirrors

The vehicle is equipped with several different
types of windows, glass and mirrors. Some of
the windows in the car are laminated.

The windshield has laminated glass. Lamina-
ted glass is also available as on option for
some other glass surfaces. Laminated glass is
reinforced, which provides better protection
against break-ins and improved soundproofing
in the passenger compartment.

The panoramic roof

*

 also has laminated glass.

The symbol shows the windows containing lamina-
ted glass.

1

Related information

•

Pinch protection for windows and sun cur-
tains (p. 160)

•

Panoramic roof

*

 (p. 165)

•

Power windows (p. 161)

•

Rearview/door mirrors (p. 163)

•

Using the windshield wipers (p. 170)

•

Using the windshield and headlight wash-
ers (p. 173)

•

Activating and deactivating the heated
rear window and door mirrors (p. 208)

Pinch protection for windows and

sun curtains

All power windows and sun curtains

*

 have a

pinch protection function that is triggered if
anything blocks them while they are opening
or closing.

If pinch protection is activated, movement will
stop and then retract automatically to approx.
50 mm (2 inches) from the point at which it
was blocked (or to full ventilation position).

It is still possible to override pinch protection
when closing is interrupted (e.g. due to ice) by
pressing and holding down the control in the
same direction.

If there is any problem with the pinch protec-
tion, a rest procedure can be tested.

WARNING

If the starter battery is disconnected, the

function for automatic opening and closing

must be reset to function correctly. A reset

is required in order for the pinch protection

to work.

Related information

•

Reset procedure for pinch protection
(p. 160)

•

Operating the power windows (p. 161)

•

Operating the panoramic roof

*

 (p. 167)

Reset procedure for pinch

protection

If you experience any problems with the elec-
trical functions for the power windows, you
can try to perform a reset.

WARNING

If the starter battery is disconnected, the

function for automatic opening and closing

must be reset to function correctly. A reset

is required in order for the pinch protection

to work.

Consult a workshop if you experience any
problems with the panoramic roof.

2

Resetting a power window

1. Start with the window in the closed posi-

tion.

2. Then move the control in manual mode

three times upward toward the closed
position.
> The system will be automatically acti-

vated.

If the problem persists, contact a workshop.

Related information

•

Pinch protection for windows and sun cur-
tains (p. 160)

•

Operating the power windows (p. 161)

1

Does not apply to windshield and panoramic roof

*

, which are always laminated and therefore do not have this symbol.