Volvo V60 (2021 year). Manual in english - page 36

•

Cleaning fabric upholstery and ceiling liner
(p. 609)

•

•

•

•

Cleaning interior plastic, metal and wood
surfaces (p. 613)

•

-------------------------------------------------------------------------------------------------------------------------------------------------------------

MAINTENANCE AND SERVICE

}}

* Option/accessory.

611

Cleaning textile floor and inlay

mats

Use of textile cleaner is recommended when
cleaning textile mats. Clean regularly and
treat stains immediately. It is important to
vacuum before using a cleaning agent.

Remove the inlay mats to clean the floor mats
and inlay mats separately. Each inlay mat is
secured into place with pins.

1. Remove the inlay mat by grasping the

inlay mat at each pin and lifting the mat
straight up.

2. Use a vacuum to remove dust and dirt.

Do not swing or strike the inlay mats vio-
lently against another object to remove dirt
as this could damage the mats.

3. After vacuuming, a specially designed tex-

tile cleaning agent should be used to
remove stains on floor mats.

4. After cleaning, put the inlay mat back into

place by pressing it in at each pin.

WARNING

•

Never use more than one inlay mat at a
time on the driver's floor. If any other
type of floor mat is used, remove the
original mat from the driver's seat floor
before driving. All types of mats must
be securely anchored in the attach-
ment points in the floor. Make sure the
floor mat does not impede the move-
ment of the brake pedal or accelerator
pedal in any way, as this could be a
serious safety hazard.

•

Volvo's floor mats are specially manu-
factured for your vehicle. They must be
properly secured in the attachment
points in the floor to help ensure they
cannot slide and become trapped
under the pedals.

Related information

•

•

Cleaning fabric upholstery and ceiling liner
(p. 609)

•

•

•

•

Cleaning interior plastic, metal and wood
surfaces (p. 613)

•

Cleaning leather upholstery

Use cleaning agents and car care products
recommended by Volvo. Clean regularly and
treat stains immediately. It is important to
vacuum before using a cleaning agent.

Volvo's leather upholstery

is treated to pro-

tect its original appearance. Over time, sun-
light, grease, dirt, etc. could break down the
protective layer. This could result in scratches
and cracking.

Leather upholstery

is a natural product that

changes and acquires a beautiful patina over
time. Regular cleaning and treatments are
required to preserve the qualities and color of
the leather. Volvo offers a comprehensive
product, Volvo Leather Care KitWipes, for
cleaning and treating leather upholstery.
When used as directed, it helps preserve the
leather's protective coating.

For optimal results, Volvo recommends clean-
ing and applying protective cream one to four
times a year (or more often as needed). Volvo
Leather Care Kit 951 0251 and Volvo Leather
Softener 943 7429 are available for purchase
at Volvo retailers.

Cleaning the leather upholstery

1. Apply the leather cleaner to a damp

sponge and squeeze it until the cleaner
foams.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

MAINTENANCE AND SERVICE

* Option/accessory.

612

2. Move the sponge in circular motions to

apply the foam to the stain.

3. Dampen the stain thoroughly with the

sponge. Let the sponge absorb the stain
and do not rub.

4. Dry the stain using a soft towel and let the

leather dry completely.

Protecting the leather upholstery

1. Apply a small amount of leather protector

to a cloth and then apply the protector to
the leather using light circular movements.

2. Let it dry for approximately 20 minutes.

> Protecting the leather upholstery

makes it better able to withstand sun-
light's harmful UV rays.

Related information

•

•

Cleaning fabric upholstery and ceiling liner
(p. 609)

•

•

•

•

Cleaning interior plastic, metal and wood
surfaces (p. 613)

•

Cleaning the leather steering

wheel

Use cleaning agents and car care products
recommended by Volvo. Clean regularly and
treat stains immediately. It is important to
vacuum before using a cleaning agent.

Leather needs to breathe. Never cover the
leather steering wheel with a plastic protector.
Volvo Leather Care Kit 951 0251 and Leather
Softener 943 7429 are recommended for
cleaning the leather steering wheel. First,
remove dirt, dust, etc. with a damp sponge or
cloth.

Sharp objects such as rings could damage
the leather on the steering wheel.

Treating stains on the steering wheel:

Type 1

(ink, wine, coffee, milk, sweat or blood)

–

Use a soft cloth or sponge. Wipe the
steering wheel using a solution of 5%
ammonia. For blood stains, mix approxi-
mately 2 dl (1 cup) of water with 25 g
(one ounce) of salt and wipe the stain.

Type 2

(grease, oil, sauces or chocolate)

1. Same procedure as for Type 1 stains.

2. Finish by wiping the wheel with an

absorbent paper or towel.

Type 3

(dry dirt or dust)

1. Remove the dirt/dust using a soft brush.

2. Same procedure as for Type 1 stains.

Related information

•

•

Cleaning fabric upholstery and ceiling liner
(p. 609)

•

•

•

•

Cleaning interior plastic, metal and wood
surfaces (p. 613)

•

-------------------------------------------------------------------------------------------------------------------------------------------------------------

MAINTENANCE AND SERVICE

* Option/accessory.

613

Cleaning interior plastic, metal and

wood surfaces

Use cleaning agents and car care products
recommended by Volvo. Clean regularly and
treat stains immediately.

A lightly dampened microfiber cloth is recom-
mended for cleaning interior details and surfa-
ces. These cloths are available for purchase at
Volvo retailers.

Never scrape or rub a stain. Never use strong
stain removers.

Do not use solvent containing alcohol to
clean the instrument panel glass.

Keep in mind that glossy surfaces can be
easily scratched. Wipe these surfaces with
a clean and dry microfiber cloth using
small, circular motions. If necessary, mois-
ten the cloth lightly with clean water.

Related information

•

•

Cleaning fabric upholstery and ceiling liner
(p. 609)

•

•

•

•

•

Cleaning the exterior

The vehicle should be washed as soon as it
becomes dirty. This makes the vehicle easier
to clean because dirt does not attach as
strongly. It also reduces the risk of scratches
and keeps the vehicle looking new. Wash the
rims at a car wash or garage with an oil sepa-
rator. Use a car washing detergent recom-
mended by Volvo.

Related information

•

•

•

•

•

•

Cleaning exterior plastic, rubber and trim
components (p. 618)

•

•

•

-------------------------------------------------------------------------------------------------------------------------------------------------------------

MAINTENANCE AND SERVICE

614

Polishing and waxing

Polish and wax the vehicle when the paint is
dull or to provide extra protection. The vehicle
does not need to be polished until it is at
least a year old. However, it can be waxed
during the first year. Do not polish or wax the
vehicle in direct sunlight. The surface of the
vehicle should not be warmer than 45 °C
(113 °F).

•

Wash and dry the vehicle very carefully
before polishing or waxing. Remove
asphalt and tar stains with asphalt
remover or paint thinner. More stubborn
stains can be removed with a grinding
paste designed for vehicle paint. Use
cleaning agents recommended by Volvo.

•

Use polish first and then liquid or paste
wax. Follow the instructions on the pack-
age carefully. Many products contain both
polish and wax.

•

A wide range of polymer-based waxes can
be purchased today. These waxes are easy
to use and produce a long-lasting, high-
gloss finish that protects the bodywork
against oxidation, road dirt and fading.

Never polish or wax initially matte exterior
details on the vehicle. This could destroy
the matte effect and make the surface per-
manently shiny.

Avoid waxing and polishing plastic and
rubber.

If using degreaser on plastic and rubber,
only rub (if necessary) with slight pressure.
Use a soft sponge.

Polishing glossy trim moldings can wear
away or damage the glossy surface layer.

Polish containing abrasives must not be
used.

Use cleaning agents recommended by
Volvo. Other treatments, such as preserva-
tion, sealing, protection, luster sealing or
similar, could damage the paintwork.
Paintwork damage caused by such treat-
ments are not covered by Volvo's warranty.

Related information

•

•

•

•

•

Cleaning exterior plastic, rubber and trim
components (p. 618)

•

•

•

-------------------------------------------------------------------------------------------------------------------------------------------------------------

MAINTENANCE AND SERVICE

}}

* Option/accessory.

615

Hand washing

The vehicle should be washed as soon as it
becomes dirty. This makes the vehicle easier
to clean because dirt does not attach as
strongly. It also reduces the risk of scratches
and keeps the vehicle looking new. Wash the
vehicle in a car wash or garage with an oil
separator and use car washing detergent.
Use cleaning agents and car care products
recommended by Volvo.

Important to keep in mind when
handwashing your vehicle

•

Avoid washing the vehicle in direct sun-
light. This could cause the detergent or
wax to dry out and become abrasive.

•

Remove bird droppings from paintwork as
soon as possible. It contains chemicals
that affect and discolor paintwork very
quickly. Use e.g. soft paper or a sponge
soaked in lots of water. Consult an author-
ized Volvo workshop for assistance
removing discoloration.

•

Hose down the underbody, including the
wheel housings and bumper.

•

Hose down the entire vehicle and remove
any loose dirt, droppings etc. to reduce
the risk of scratches from washing. Do not
spray directly onto locks.

•

If necessary, use cold degreaser on heavily
soiled surfaces. Note that in such cases
the surfaces must not be hot from the sun.

•

Wash using a sponge, car washing deter-
gent and plenty of lukewarm water. Make
sure that the sponge is clean. A dirty
sponge can scratch the paint.

•

Clean the wiper blades with lukewarm
soap solution or car washing detergent.

•

Dry the vehicle using a clean, soft chamois
or a squeegee. Try not to let drops of
water dry in strong sunlight. This could
cause water drying stains that may need
to be polished out.

•

In areas with heavy industrial emissions,
more frequent washing of the vehicle's
exterior is recommended.

•

Tar spots from asphalt may remain even
after washing. Use a Volvo-recommended
tar remover to remove these spots after
washing the vehicle.

WARNING

Always entrust engine washing to a work-

shop. If the engine is hot, there is a risk of

fire.

Dirty headlights do not work as well. Clean
them regularly, e.g. when refueling.

Do not use corrosive cleaners. Use water
and a non-abrasive sponge.

Exterior lighting such as headlights and
taillights may develop temporary conden-
sation on the inside of the lens. This is nor-
mal. All exterior lighting is designed to
resist this. Condensation is normally ven-
ted out of the lamp housing once the light
has been lit for some period of time.

•

Make sure that the panoramic roof

and sun shade are closed before wash-
ing the vehicle.

•

Never use abrasive polishing agents on
the panoramic roof.

•

Never use wax on the rubber seals
around the panoramic roof.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

MAINTENANCE AND SERVICE

616

Remember to remove dirt from the drain
holes in the doors and sills after washing
the vehicle.

Related information

•

•

•

•

•

Cleaning exterior plastic, rubber and trim
components (p. 618)

•

•

•

Settings for automatically activating the
parking brake (p. 402)

•

Automatic car washes

The vehicle should be washed as soon as it
becomes dirty. The longer the dirt remains,
the more difficult it will be to keep the vehicle
clean. It could also lead to paint damage.

Washing your vehicle in an automatic car
wash is a fast and easy way to keep your vehi-
cle clean, but it does not reach all areas of the
vehicle. Volvo recommends washing your
vehicle by hand or supplementing automatic
car washes with a hand wash.

Volvo recommends not washing the vehi-
cle in an automatic car wash during the
first few months; the paintwork on new
vehicles takes some time to fully harden.

Before driving the vehicle into a car wash,
deactivate the Automatic Braking when
Stationary and Automatic Parking Brake
Application functions. If the functions are
not deactivated, the brake system will
seize when the vehicle is stationary and the
vehicle will not be able to roll.

For automatic car washes in which the
vehicle is pulled forward on rolling wheels:

1. Before washing the vehicle, make sure

that the automatic rain sensor is deac-
tivated. If it is not deactivated and
inadvertently starts, the wiper arms
could be damaged.

2. To help prevent damage from the auto-

matic car wash machinery, make sure
that the door mirrors are folded in,
antennas retracted or removed, and
any auxiliary lights secured.

3. Drive into the automatic car wash.
4. Turn off the "Automatic Braking when

Stationary" function using the

but-

ton in the tunnel console.

5. Turn off the "Automatic Parking Brake

Application" function in the center dis-
play's Top view.

6. Turn off the engine by turning the start

knob in the tunnel console clockwise.
Hold the knob in position for at least
2 seconds.

The vehicle is now ready for the automatic
car wash.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

MAINTENANCE AND SERVICE

* Option/accessory.

617

The system will automatically change to

mode if the above steps are not followed.
In

mode, the wheels are locked, which

they should not be when the vehicle is
being washed in a car wash.

Keep in mind that if the vehicle is equipped
with the keyless locking and unlocking
function

, the doors and tailgate/trunk lid

may open when washing the vehicle if the
remote key is within range.

Testing the brakes

WARNING

Always test the brakes after washing the

vehicle, including the parking brake, to

ensure moisture and corrosion do not

attach the brake pads and impair brake

functionality.

Lightly depress the brake pedal from time to
time when driving long distances in rain or
slush. The heat from the friction will help
warm up and dry the brake pads. Do the same
after starting the vehicle in very damp or cold
weather.

Related information

•

•

•

•

•

Cleaning exterior plastic, rubber and trim
components (p. 618)

•

•

•

Auto-hold brakes (p. 403)

•

•

Settings for automatically activating the
parking brake (p. 402)

•

Keyless and touch-sensitive surfaces

(p. 254)

High-pressure washing

The vehicle should be washed as soon as it
becomes dirty. The longer the dirt remains,
the more difficult it will be to keep the vehicle
clean. It could also lead to paint damage.
Wash the vehicle in a car wash or garage
with an oil separator. Use a car washing
detergent recommended by Volvo.

If washing the vehicle with a high-pressure
wash, use sweeping movements and keep the
nozzle at least 30 cm (13 in.) from the vehicle.
Do not spray directly onto locks.

Related information

•

•

•

•

•

Cleaning exterior plastic, rubber and trim
components (p. 618)

•

•

•

-------------------------------------------------------------------------------------------------------------------------------------------------------------

MAINTENANCE AND SERVICE

* Option/accessory.

618

Cleaning the wiper blades

Asphalt, dust and salt residue on wiper blades,
as well as insects, ice etc. on the windshield,
shorten the service life of wiper blades.

When cleaning, put the wiper blades in the
service position.

Wash the wiper blades and windshield
regularly with a lukewarm soap solution or
vehicle shampoo. Do not use strong sol-
vents.

Related information

•

•

•

•

•

Cleaning exterior plastic, rubber and trim
components (p. 618)

•

•

•

Cleaning exterior plastic, rubber

and trim components

The vehicle should be washed as soon as it
becomes dirty. The longer the dirt remains,
the more difficult it will be to keep the vehicle
clean. It could also lead to paint damage. Use
a car washing detergent recommended by
Volvo.

A special cleaning agent available from Volvo
retailers is recommended for the cleaning and
care of colored plastic parts, rubber and trim
components, e.g. glossy trim. Follow the
usage instructions for the cleaning agent care-
fully.

Avoid using car washing detergents with a pH
value lower than 3.5 or higher than 11.5. Doing
so could result in the discoloring of anodized
aluminum surfaces

(as shown in the illustra-

tions below). Abrasive polishing agents are not
recommended for these areas (as shown in
the illustrations below).

-------------------------------------------------------------------------------------------------------------------------------------------------------------

MAINTENANCE AND SERVICE

619

Components that should be washed with a cleaning

product with a pH value between 3.5 and 11.5.

Avoid waxing and polishing plastic and
rubber.

If using degreaser on plastic and rubber,
only rub (if necessary) with slight pressure.
Use a soft sponge.

Polishing glossy trim moldings can wear
away or damage the glossy surface layer.

Polish containing abrasives must not be
used.

Avoid washing the vehicle with cleaner
with a pH value below 3.5 or above 11.5.
This could cause discoloration of anodized
aluminum components like the roof rail and
around the side windows.

Never use metal polishing agent on ano-
dized aluminum components. This could
cause discoloration and destroy the sur-
face treatment.

Related information

•

•

•

•

•

•

•

•

Cleaning rims

The vehicle should be washed as soon as it
becomes dirty. The longer the dirt remains,
the more difficult it will be to keep the vehicle
clean. It could also lead to paint damage.
Wash the rims at a car wash or garage with
an oil separator. Use a car washing detergent
recommended by Volvo.

Use a rim cleaning agent recommended by
Volvo.

Strong rim cleaning agents could damage the
surface and stain the chromed aluminum rims.

Related information

•

•

•

•

•

Cleaning exterior plastic, rubber and trim
components (p. 618)

•

•

•

-------------------------------------------------------------------------------------------------------------------------------------------------------------

MAINTENANCE AND SERVICE

620

Corrosion protection

Your vehicle is constructed with protection
against corrosion.

Corrosion protection for the body consists of
modern metallic protective coatings on the
sheet metal, a high-quality painting process,
corrosion-protected and minimized metal
overlap, and shielding plastic components,
abrasion protection and supplemental rust
inhibitor in exposed areas. In the chassis,
exposed components of the wheel suspension
are made of corrosion-resistant cast alumi-
num.

Inspection and maintenance

The corrosion protection does not normally
require maintenance, but keeping the vehicle
clean helps reduce the risk of corrosion. The
use of strong alkaline or acidic cleaning fluids
should be avoided on shiny body components.
Any stone chips in the paint should be
touched up as soon as they are discovered.

Related information

•

•

•

•

•

•

Cleaning exterior plastic, rubber and trim
components (p. 618)

•

•

Touching up minor paint damage
(p. 621)

Paintwork

The paintwork consists of multiple layers. It is
an important part of the vehicle's corrosion
protection and therefore needs to be checked
regularly.

The most common types of paint damage are
minor stone chips, scratches and damage to
e.g. the edges of fenders, doors and bumpers.
To help prevent corrosion, paint damage
should be rectified immediately.

Related information

•

•

Color codes (p. 622)

-------------------------------------------------------------------------------------------------------------------------------------------------------------

MAINTENANCE AND SERVICE

621

Touching up minor paint damage

The paintwork is an important part of the
vehicle's corrosion protection and therefore
needs to be checked regularly. The most
common types of paint damage are minor
stone chips, scratches and damage to e.g.
the edges of fenders, doors and bumpers.

To help prevent corrosion, paint damage
should be rectified immediately.

Make sure the surface is clean and dry
before performing any touch-ups to the
paint. The surface temperature should be
at least 15 °C (59 °F).

Materials that might be needed

•

Primer

‒

special adhesive primer is availa-

ble in a spray can for e.g. plastic-covered
bumpers.

•

Base coat and clear coat

‒

available in

spray cans or as a touch-up pen/stick

•

Masking tape.

•

Fine-grain sandpaper.

Applying touch-up paint to a damaged
surface

If the damage has not reached all the way
down to the metal, then touch-up paint can be
applied immediately after the surface has been
cleaned.

1. Place a strip of masking tape over the

damaged surface. Pull the tape off so that
any loose flakes of paint adhere to it.

If the damage goes down to the bare
metal, you may need to use primer first. If
the paint damage is on a plastic surface,
an adhesive primer should be used for bet-
ter results. Spray the primer into the lid of
the spray can and brush on thinly.

2. Light sanding with a very fine-grained

sandpaper or similar may be required
before painting (e.g. if there are uneven
edges). Clean the area carefully to remove
dirt, grease, salts, etc. and let it dry.

3. Thoroughly mix the primer and apply it

with a small brush, toothpick or similar.
When the primer is dry, apply one or more
coats of paint and then a clear coat, letting
the paint dry between each application.

If there is a longer scratch, follow the same
procedure as above, but first mask off the sur-
rounding area to protect the undamaged paint.

Touch-up pens/sticks and spray paint are
available at Volvo retailers.

Touching up minor paint damage (p. 621)

If the stone chip has not gone down to the
bare metal and an undamaged coat of
paint remains, apply base coat and clear
coat immediately after cleaning the sur-
face.

Related information

•

Paintwork (p. 620)

•

Color codes (p. 622)

Follow the instructions on the packaging for the touch-up pen/stick carefully.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

MAINTENANCE AND SERVICE

622

Color codes

Color code

The color code decal is placed on the vehicle's
left-side door pillar (B-pillar) between the front
and rear doors and is visible when the left
front door is open.

Sample color code (1): US models.

Exterior color code

Secondary exterior color code (if applica-
ble)

Sample color code (1): Canadian models.

Exterior color code

Secondary exterior color code (if applica-
ble)

Related information

•

Paintwork (p. 620)

•

Changing rear window wipers

The wiper blades help remove water from the
windshield and rear window. Along with the
washer fluid, they are designed to clean the
glass and help improve visibility while driving.
The windshield and rear window wiper
blades can be replaced.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

MAINTENANCE AND SERVICE

623

Changing rear window wipers

Lift the wiper arm from the window and pull the

upper section of the blade down diagonally to the

right.

Grasp the center of the wiper blade and
lift it from the window to the stop posi-
tion.

When the wiper arm is halfway folded out,
it will stop in a locking position that helps
prevent the arm from falling back onto the
rear window. The wiper arm must be
pulled past the locking position stop in
order to change the wiper blade.

Grasp the center attachment point and
pull it diagonally down to the right until
the blade detaches from the arm.

Lift the sleeve on the wiper blade attach-
ment. Make sure that the wiper arm
doesn't accidentally retract toward the
window.

Remove the washer hose from the attach-
ment.

Attach the new washer hose and wiper
blade in the attachment. Fold down the
sleeve on the wiper blade attachment.

Make sure that the hose is positioned as
shown in the illustration. If the hose is not
positioned as shown, it could be squeezed
by the sleeve when it is folded down again.

6. Press the new wiper blade until it clicks

into place. Check to make sure the blade
is securely in place.

7. Fold the wiper arm back toward the win-

dow.

Using the rain sensor (p. 175)

Check the blades regularly. Neglected
maintenance shortens the life of the
blades.

Related information

•

•

Using the windshield and headlight wash-
ers (p. 177)

•

Using automatic rear window wiping
when backing up (p. 179)

•

Activating and deactivating the rain sen-
sor's memory function (p. 176)

•

Using the rear window wiper/washer
(p. 178)

•

Filling washer fluid (p. 626)

•

Putting the wiper blades in service posi-
tion (p. 625)

•

Replacing windshield wiper blades
(p. 624)

•

Using the windshield wipers (p. 174)

•

Wiper blades and washer fluid (p. 174)

-------------------------------------------------------------------------------------------------------------------------------------------------------------

MAINTENANCE AND SERVICE

624

Replacing windshield wiper blades

Raise the wiper arms to the service position.
Service position is activated/deactivated via
the function view in the center display when
the car is stationary and the windshield wipers
are not on.

Put the wiper blade in removal position by
folding it out from the wiper arm until it
clicks.

Press and hold the lock button on the
wiper blade attachment.

While holding the button down, pull the
blade straight out, parallel with the wiper
arm.

4. Slide in the new wiper blade until it clicks

into place.

5. Fold the blade back toward the arm until it

clicks into place. The blade is no longer in
its removal position and can once again be
moved.

6. Check to make sure the wiper blade is

securely in place.

7. Press the wiper blade back against the

windshield.

Wiper blades come in varying lengths

Using the rain sensor (p. 175)

When changing wiper blades, make sure
that the blades are of different lengths. The
blade on the driver's side is longer than the
one on the passenger side.

Related information

•

•

Using the windshield and headlight wash-
ers (p. 177)

•

Using automatic rear window wiping
when backing up (p. 179)

•

Activating and deactivating the rain sen-
sor's memory function (p. 176)

•

Using the rear window wiper/washer
(p. 178)

•

Filling washer fluid (p. 626)

•

Putting the wiper blades in service posi-
tion (p. 625)

•

Changing rear window wipers (p. 622)

•

Using the windshield wipers (p. 174)

•

Wiper blades and washer fluid (p. 174)

-------------------------------------------------------------------------------------------------------------------------------------------------------------

MAINTENANCE AND SERVICE

625

Putting the wiper blades in service

position

The windshield wiper blades must be in the
service (vertical) position for certain opera-
tions, e.g. replacing the blades.

Windshield wipers in the service position.

The windshield wipers must be in the service
position when replacing, washing or lifting the
blades (e.g. to scrape ice or snow from the
windshield).

Before placing the wipers in service posi-
tion, ensure that they have not frozen to
the windshield.

Activating/deactivating service
position

The service position can be activated/deacti-
vated when the vehicle is stationary and the
windshield wipers are switched off. Service
position is activated/deactivated via Function
view in the center display:

Tap the

Wiper Service

Position

button. The indica-

tor light in the button will illu-
minate when service position
is activated. The wipers will
move to the service position
when activated. To deactivate

the service position, tap

Wiper Service

Position

once. The indicator light in the but-

ton will go out when service position is deacti-
vated.

The wiper blades will also move out of the
service position if:

•

The windshield wipers are turned on.

•

The windshield washers are turned on.

•

The rain sensor is activated.

•

The vehicle begins moving.