Toyota Highlander Hybrid (2023 year). Manual in english - page 28

 

  Index      Toyota     Toyota Highlander Hybrid (2023 year). Manual in english

 

Search            copyright infringement  

 

   

 

   

 

Content      ..     26      27      28      29     ..

 

 

 

Toyota Highlander Hybrid (2023 year). Manual in english - page 28

 

 

449

7-2. Steps to take in an emergency

7

Whe

n tr

ouble

 ar

ises

Rear passengers’ seat belt reminder light (warning buzzer)

*2

*1

:This light illuminates on the multi-information display.

*2

:Rear passengers’ seat belt warning buzzer:

The rear passengers’ seat belt warning buzzer sounds to alert the rear pas-
senger that his or her seat belt is not fastened. If the seat belt is unfas-
tened, the buzzer sounds intermittently for a certain period of time, after the 
seat belt is fastened and unfastened and the vehicle reaches a certain 
speed.

Tire pressure warning light

Warning light

Details/Actions

(7-inch dis-

play)

*1

or

(12.3-inch dis-

play)

*1

Warns the second and/or third seat passengers to fasten 
their seat belts. An indicator corresponding to an unfas-
tened second or third seat seat belt will illuminate.

Fasten the seat belt.

Warning light

Details/Actions

When the light comes on after blinking for approximately 1 
minute:
Malfunction in the tire pressure warning system

Have the system checked by your Toyota dealer.

When the light comes on:
Low tire inflation pressure such as

Natural causes

Flat tire

Immediately stop the vehicle in a safe place.
Handling method (

P.453)

450

7-2. Steps to take in an emergency

LTA indicator (warning buzzer)

Intuitive parking assist OFF indicator (warning buzzer)

“RCTA OFF” indicator (warning buzzer)

Warning light

Details/Actions

(orange)

Indicates a malfunction in the LTA (Lane Tracing Assist)

Follow the instructions displayed on the multi-infor-
mation display. (

P.263)

Warning light

Details/Actions

(flashes)

(if equipped)

Indicates a malfunction in the intuitive parking assist func-
tion

Have the vehicle inspected by your Toyota dealer 
immediately.

Indicates that the system is temporarily unavailable, possi-
bly due to a sensor being dirty or covered with ice, etc.

Follow the instructions displayed on the multi-infor-
mation display. (

P.285)

Warning light

Details/Actions

Indicates a malfunction in the RCTA (Rear Cross Traffic 
Alert) function

Have the vehicle inspected by your Toyota dealer immedi-
ately.

Indicates that the rear bumper around the radar sensor is 
covered with dirt, etc. (

P.279)

Follow the instructions displayed on the multi-information 
display. (

P.292)

451

7-2. Steps to take in an emergency

7

Whe

n tr

ouble

 ar

ises

PKSB OFF indicator (warning buzzer)

PCS warning light

Warning light

Details/Actions

(flashes)

(if equipped)

When a buzzer sounds:
Indicates a malfunction in the PKSB (Parking Support 
Brake) system

Have the vehicle inspected by your Toyota dealer 
immediately.

When a buzzer does not sound:
Indicates that the system is temporarily unavailable, possi-
bly due to a sensor being dirty or covered with ice, etc.

Follow the instructions displayed on the multi-infor-
mation display. (

P.303, 456)

Warning light

Details/Actions

(flashes or illu-

minates)

When a buzzer sounds simultaneously:
Indicates a malfunction has occurred in the PCS (Pre-Colli-
sion System).

Have the vehicle inspected by your Toyota dealer 
immediately.

When a buzzer does not sound:
The PCS (Pre-Collision System) has become temporarily 
unavailable, corrective action may be necessary.

Follow the instructions displayed on the multi-infor-
mation display. (

P.240, 456)

If the PCS (Pre-Collision System) or VSC (Vehicle Stability 
Control) system is disabled, the PCS warning light will illu-
minate.

P.252

452

7-2. Steps to take in an emergency

Slip indicator

Parking brake indicator (warning buzzer)

*

*

: A buzzer will sound if the vehicle is driven at a speed of approximately 3 

mph (5 km/h) or more.

Brake hold operated indicator

Warning buzzer

In some cases, the buzzer may not 

be heard due to being in a noisy 

location or audio sound.

Front passenger detection sen-

sor, seat belt reminder and 

warning buzzer

If luggage is placed on the front 

passenger seat, the front passen-

ger detection sensor may cause 

Warning light

Details/Actions

When the warning light is illuminated:
Indicates a malfunction in:

The VSC system;

The TRAC system;

The Trailer Sway Control; or

The hill-start assist control system;

Have the vehicle inspected by your Toyota dealer 
immediately.

When the warning light flashes:
Indicates that the ABS, VSC, TRAC or Trailer Sway Control 
system is operating

Warning light

Details/Actions

(flashes)

(U.S.A.)

or

(flashes)

(Canada)

It is possible that the parking brake is not fully engaged or 
released

Operate the parking brake switch once again.

This light comes on when the parking brake is not released. 
If the light turns off after the parking brake is fully released, 
the system is operating normally.

Warning light

Details/Actions

(flashes)

Indicates a malfunction in the brake hold system

Have the vehicle inspected by your Toyota dealer 
immediately.

453

7-2. Steps to take in an emergency

7

Whe

n tr

ouble

 ar

ises

the warning light to flash and the 

warning buzzer to sound even if a 

passenger is not sitting in the 

seat.

If a cushion is placed on the seat, 

the sensor may not detect a pas-

senger, and the warning light may 

not operate properly.

SRS warning light

This warning light system monitors 

the airbag sensor assembly, front 

impact sensors, side impact sensors 

(front), side impact sensors (front 

door), side impact sensors (rear), 

driver’s seat position sensor, 

driver’s seat belt buckle switch, front 

passenger occupant classification 

system (ECU and sensors), “PASS 

AIR BAG ON” indicator light, “PASS 

AIR BAG OFF” indicator light, front 

passenger’s seat belt buckle switch, 

driver’s seat belt pretensioner, front 

passenger’s seat belt pretensioner 

and force limiter, airbags, intercon-

necting wiring and power sources. 

(

P.34)

If the malfunction indicator 

lamp comes on while driving

First check the following:

Is the fuel tank empty?

If it is, fill the fuel tank immediately.

Is the fuel tank cap loose?

If it is, tighten it securely.

The light will go off after several 

driving trips.
If the light does not go off even after 

several trips, contact your Toyota 

dealer as soon as possible.

Electric power steering system 

warning light (warning buzzer)

When the 12-volt battery charge 

becomes insufficient or the voltage 

temporarily drops, the electric power 

steering system warning light may 

come on and the warning buzzer 

may sound.

When the tire pressure warning 

light comes on

Inspect the tires to check if a tire is 

punctured.
If a tire is punctured: 

P.461

If none of the tires are punctured:

Turn the power switch off then turn it 

to ON. Check if the tire pressure 

warning light comes on or blinks.

If the tire pressure warning light 

blinks for 1 minute then stays on

There may be a malfunction in the 

tire pressure warning system. Have 

the vehicle inspected by your Toyota 

dealer immediately.

If the tire pressure warning light 

comes on

1

After the temperature of the tires 

has lowered sufficiently, check 

the inflation pressure of each tire 

and adjust them to the specified 

level.

2

If the warning light does not turn 

off even after several minutes 

have elapsed, check that the 

inflation pressure of each tire is 

at the specified level and perform 

initialization. (

P.410)

If the warning light does not turn off 

several minutes after the initializa-

tion has been performed, have the 

vehicle inspected by your Toyota 

dealer immediately.

The tire pressure warning light 

may come on due to natural 

causes

The tire pressure warning light may 

come on due to natural causes such 

as natural air leaks and tire inflation 

pressure changes caused by tem-

perature. In this case, adjusting the 

tire inflation pressure will turn off the 

warning light (after a few minutes).

When a tire is replaced with a 

spare tire

The compact spare tire is not 

equipped with a tire pressure warn-

ing valve and transmitter. If a tire 

goes flat, the tire pressure warning 

454

7-2. Steps to take in an emergency

light will not turn off even though the 

flat tire has been replaced with the 

spare tire. Replace the spare tire 

with the repaired tire and adjust the 

tire inflation pressure. The tire pres-

sure warning light will go off after a 

few minutes.

Conditions that the tire pres-

sure warning system may not 

function properly

P.408

WARNING

If both the ABS and the brake 

system warning lights remain 

on

Stop your vehicle in a safe place 

immediately and contact your Toy-

ota dealer.

The vehicle will become 

extremely unstable during brak-

ing, and the ABS system may fail, 

which could cause an accident 

resulting in death or serious injury.

When the electric power 

steering system warning light 

comes on

When the light comes on yellow, 

the assist to the power steering is 

restricted. When the light comes 

on red, the assist to the power 

steering is lost and handling oper-

ations of the steering wheel 

become extremely heavy.

When steering wheel operations 

are heavier than usual, grip the 

steering wheel firmly and operate 

it using more force than usual.

If the tire pressure warning 

light comes on

Be sure to observe the following 

precautions.

Failure to do so could cause a 

loss of vehicle control and result 

in death or serious injury.

Stop your vehicle in a safe place 

as soon as possible. Adjust the 

tire inflation pressure immedi-

ately.

If the tire pressure warning light 

comes on even after tire infla-

tion pressure adjustment, it is 

probable that you have a flat 

tire. Check the tires. If a tire is 

flat, change it with the spare tire 

and have the flat tire repaired by 

the nearest Toyota dealer.

Avoid abrupt maneuvering and 

braking.

If the vehicle tires deteriorate, 

you could lose control of the 

steering wheel or the brakes.

If a blowout or sudden air 

leakage should occur

The tire pressure warning system 

may not activate immediately.

Maintenance of the tires

Each tire, including the spare (if 

provided), should be checked 

monthly when cold and inflated to 

the inflation pressure recom-

mended by the vehicle manufac-

turer on the vehicle placard or tire 

inflation pressure label (tire and 

load information label). (If your 

vehicle has tires of a different size 

than the size indicated on the 

vehicle placard or tire inflation 

pressure label [tire and load infor-

mation label], you should deter-

mine the proper tire inflation 

pressure for those tires.)

455

7-2. Steps to take in an emergency

7

W

he

tro

ub

le

 ar

is

es

WARNING

As an added safety feature, your 

vehicle has been equipped with a 

tire pressure monitoring system 

(TPMS-tire pressure warning sys-

tem) that illuminates a low tire 

pressure telltale (tire pressure 

warning light) when one or more 

of your tires is significantly 

under-inflated. Accordingly, when 

the low tire pressure telltale (tire 

pressure warning light) illumi-

nates, you should stop and check 

your tires as soon as possible, 

and inflate them to the proper 

pressure. Driving on a signifi-

cantly under-inflated tire causes 

the tire to overheat and can lead 

to tire failure. Under-inflation also 

reduces fuel efficiency and tire 

tread life, and may affect the vehi-

cle’s handling and stopping ability.

Please note that the TPMS (tire 

pressure warning system) is not a 

substitute for proper tire mainte-

nance, and it is the driver’s 

responsibility to maintain correct 

tire pressure, even if under-infla-

tion has not reached the level to 

trigger illumination of the TPMS 

low tire pressure telltale (tire pres-

sure warning light).

Your vehicle has also been 

equipped with a TPMS (tire pres-

sure warning system) malfunc-

tion indicator to indicate when the 

system is not operating properly. 

The TPMS (tire pressure warning 

system) malfunction indicator is 

combined with the low tire pres-

sure telltale (tire pressure warning 

light). When the system detects a 

malfunction, the telltale will flash 

for approximately one minute and 

then remain continuously illumi-

nated. This sequence will con-

tinue upon subsequent vehicle 

start-ups as long as the malfunc-

tion exists. When the malfunction 

indicator is illuminated, the sys-

tem may not be able to detect or 

signal low tire pressure as 

intended.

TPMS (tire pressure warning sys-

tem) malfunctions may occur for a 

variety of reasons, including the 

installation of replacement or 

alternate tires or wheels on the 

vehicle that prevent the TPMS 

(tire pressure warning system) 

from functioning properly. Always 

check the TPMS (tire pressure 

warning system) malfunction tell-

tale after replacing one or more 

tires or wheels on your vehicle to 

ensure that the replacement or 

alternate tires and wheels allow 

the TPMS (tire pressure warning 

system) to continue to function 

properly.

NOTICE

To ensure the tire pressure 

warning system operates 

properly

Do not install tires with different 

specifications or makers, as the 

tire pressure warning system may 

not operate properly.

456

7-2. Steps to take in an emergency

If a warning message 

is displayed

The multi-information dis-
play shows warnings of sys-
tem malfunctions, 
incorrectly performed oper-
ations, and messages that 
indicate a need for mainte-
nance. When a message is 
shown, perform the correc-
tion procedure appropriate 
to the message.

Additionally, if a warning 
light comes on or flashes at 
the same time that a warn-
ing message is displayed, 
take the appropriate correc-
tive action for the warning 
light. (

P.445)

If a warning message is dis-
played again after the 
appropriate actions have 
been performed, contact 
your Toyota dealer.

457

7-2. Steps to take in an emergency

7

Whe

n tr

ouble

 ar

ises

The warning lights and warning buzzers operate as follows depend-
ing on the content of the message. If a message indicates the need 
for inspection by a dealer, have the vehicle inspected by your Toyota 
dealer immediately.

*

: A buzzer sounds the first time a message is shown on the multi-informa-

tion display.

Warning messages

The warning messages explained 

below may differ from the actual 

messages according to operation 

conditions and vehicle specifica-

tions.

Warning buzzer

In some cases, the buzzer may not 

be heard due to being in a noisy 

location or audio sound.

If “Engine Oil Level Low Add or 

Replace” is displayed

The engine oil level is low. Check 

the level of the engine oil, and add if 

necessary.
This message may appear if the 

vehicle is stopped on a slope. Move 

the vehicle to a level surface and 

check to see if the message disap-

pears.

Messages and warnings

Warning light

Warning 

buzzer

*

Warning

-

Sounds

Indicates an important situation, such as 
when a system related to driving is mal-
functioning or that danger may result if 
the correction procedure is not per-
formed

Indicates a situation, such as when dam-
age to the vehicle or danger may result

Comes on or 

flashes

Sounds

Indicates an important situation, such as 
when the systems shown on the 
multi-information display may be malfunc-
tioning

-

Does not 

sound

Indicates a condition, such as malfunc-
tion of electrical components, their condi-
tion, or indicates the need for 
maintenance

Indicates a situation, such as when an 
operation has been performed incor-
rectly, or indicates how to perform an 
operation correctly

458

7-2. Steps to take in an emergency

If “Hybrid System Stopped 

Steering Power Low” is dis-

played

This message is displayed if the 

hybrid system is stopped while driv-

ing.
When steering wheel operations are 

heavier than usual, grip the steering 

wheel firmly and operate it using 

more force than usual.

If “Hybrid System Overheated 

Output Power Reduced” is dis-

played

This message may be displayed 

when driving under severe operat-

ing conditions. (For example, when 

driving up a long steep hill.) 

Handling method: 

P.484

If “Traction Battery Needs to be 

Protected Refrain from the Use 

of N Position” is displayed

This message may be displayed 

when the shift lever is in N.
As the hybrid battery (traction bat-

tery) cannot be charged when the 

shift lever is in N, shift the shift lever 

to P when the vehicle is stopped.

If “Traction Battery Needs to be 

Protected Shift into P to 

Restart” is displayed

This message is displayed when the 

hybrid battery (traction battery) 

charge has become extremely low 

because the shift lever has been left 

in N for a certain amount of time.
When operating the vehicle, shift to 

P and restart the hybrid system.

If “Shift to P Before Exiting 

Vehicle” or “Shift to P when 

Parked” is displayed

This message is displayed when the 

driver’s door is opened without turn-

ing the power switch off with the 

shift lever in any position other than 

P. Change the shift lever to P.

If “Shift is in N Release Acceler-

ator Before Shifting” is dis-

played

The accelerator pedal has been 

depressed when the shift lever is in 

N.
Release the accelerator pedal and 

shift the shift lever to D, S or R.

If “Press Brake when Vehicle is 

Stopped Hybrid System may 

Overheat” is displayed

The message may be displayed 

when the accelerator pedal is 

depressed to hold the vehicle while 

the vehicle is stopped on an incline, 

etc. The hybrid system may over-

heat. Release the accelerator pedal 

and depress the brake pedal.

If “Auto Power OFF to Conserve 

Battery” is displayed

Power was cut off due to the auto-

matic power off function. Next time 

when starting the hybrid system, 

operate the hybrid system for 

approximately 5 minutes to 

recharge the 12-volt battery.

If “Headlight System Malfunc-

tion Visit Your Dealer” is dis-

played

The following systems may be mal-

functioning. Have the vehicle 

inspected by your Toyota dealer 

immediately.

The LED headlight system (if AFS 

[Adaptive Front-lighting System] 

equipped)

AFS (Adaptive Front-lighting Sys-

tem) (if equipped)

The automatic headlight leveling 

system (if equipped)

Automatic High Beam

If “Radar Cruise Control 

Unavailable See Owner's Man-

ual” is shown

The dynamic radar cruise control 

with full-speed range system is sus-

pended temporarily or until the prob-

lem shown in the message is 

459

7-2. Steps to take in an emergency

7

Whe

n tr

ouble

 ar

ises

resolved. (causes and coping meth-

ods: 

P.240)

If “Radar Cruise Control 

Unavailable” is shown

The dynamic radar cruise control 

with full-speed range system cannot 

be used temporarily. Use the system 

when it becomes available again.

If a message that indicates the 

malfunction of front camera is 

displayed

The following systems may be sus-

pended until the problem shown in 

the message is resolved. (

P.240, 

451)

PCS (Pre-Collision system)

LTA (Lane Tracing Assist)

Automatic High Beam

RSA (Road Sign Assist) (if 

equipped)

Dynamic radar cruise control with 

full-speed range

If a message that indicates the 

malfunction of radar sensor is 

displayed

The following systems may be sus-

pended until the problem shown in 

the message is resolved. (

P.240, 

451)

PCS (Pre-Collision system)

LTA (Lane Tracing Assist)

Dynamic radar cruise control with 

full-speed range

If “AWD System Overheated 

Switching to 2WD Mode” or 

“AWD System Overheated 2WD 

Mode Engaged” is displayed

This message may be displayed 

when driving under extremely high 

load conditions.
Drive the vehicle at low speeds and 

stop the vehicle in a safe place with 

the hybrid system operating until the 

message is cleared.
If the message is not cleared, have 

the vehicle inspected by your Toyota 

dealer.

If “Check Fuel Cap” is dis-

played

The fuel tank cap is not properly 

installed. Correctly install the fuel 

tank cap.

If “Maintenance Required 

Soon” is displayed

Indicates that all maintenance 

according to the driven distance on 
the maintenance schedule

*

 should 

be performed soon.
Comes on approximately 4500 

miles (7200 km) after the message 

has been reset. If necessary, per-

form maintenance. Please reset the 

message after the maintenance is 

performed. (

P.387)

*

: Refer to the separate “Scheduled 

Maintenance Guide” or “Owner’s 
Manual Supplement” for the main-
tenance interval applicable to your 
vehicle.

If “Maintenance Required Visit 

Your Dealer” is displayed

Indicates that all maintenance is 

required to correspond to the driven 

distance on the maintenance sched-
ule

*

.

Comes on approximately 5000 

miles (8000 km) after the message 

has been reset. (The indicator will 

not work properly unless the mes-

sage has been reset.) Perform the 

necessary maintenance. Please 

reset the message after the mainte-

nance is performed. (

P.387)

*

: Refer to the separate “Scheduled 

Maintenance Guide” or “Owner’s 
Manual Supplement” for the main-
tenance interval applicable to your 
vehicle.

If “Oil Maintenance Required 

Soon” is displayed

Indicates that the engine oil should 

be scheduled to be changed.

460

7-2. Steps to take in an emergency

Check the engine oil and change it if 

necessary. After changing the 

engine oil, make sure to reset the 

message. (

P.398)

If “Oil Maintenance Required” is 

displayed

Indicates that the engine oil should 

be changed.
Check and change the engine oil, 

and oil filter by your Toyota dealer. 

After changing the engine oil, make 

sure to reset the message. 

(

P.398)

If a message that indicates the 

need for visiting your Toyota 

dealer is displayed

The system or part shown on the 

multi-information display is malfunc-

tioning. Have the vehicle inspected 

by your Toyota dealer immediately.

If a message that indicates the 

need for referring to Owner’s 

Manual is displayed

If any of the following messages 

are shown on the multi-informa-

tion display, it may indicate a mal-

function. Immediately stop the 

vehicle and contact your Toyota 

dealer.

• “Braking Power Low Stop in a 

Safe Place See Owner's Manual”

• “Oil Pressure Low Stop in a Safe 

Place See Owner's Manual”

• “Charging System Malfunction 

Stop in a Safe Place See Owner's 

Manual”

• “Stop in a Safe Place See Owner's 

Manual”

• “Shift to P See Owner's Manual”

If any of the following messages 

are shown on the multi-informa-

tion display, the vehicle may have 

run out of fuel. Stop the vehicle in 

a safe place and, if the fuel level is 

low, refuel the vehicle.

• “Hybrid System Stopped”

• “Engine Stopped”

If any of the following messages 

are shown on the multi-informa-

tion display, it may indicate a mal-

function. Have the vehicle 

inspected by your Toyota dealer 

immediately.

• “Hybrid System Malfunction”

• “Check Engine”

• “Hybrid Battery System Malfunc-

tion”

• “Accelerator System Malfunction”

• “Smart Key System Malfunction 

See Owner's Manual”

If any of the following messages 

are shown on the multi-informa-

tion display, follow the instruc-

tions.

• “Engine Coolant Temp High Stop 

in a Safe Place See Owner's Man-

ual” (

P.484)

If “Maintenance Required for Trac-

tion Battery Cooling Parts See 

Owner's Manual” is shown, the fil-

ters may be clogged, the air intake 

vents may be blocked, or there 

may be a gap in the duct. There-

fore, perform the following correc-

tion procedure.

• Cleaning the hybrid battery (trac-

tion battery) air intake vents 

(

P.420)

If the warning message is shown 
even if the vents are cleaned, have 
the vehicle inspected by your Toyota 
dealer.

NOTICE

If “High Power Consumption 

Partial Limit on AC/Heater 

Operation” is displayed fre-

quently

There is a possible malfunction 

relating to the charging system or 

the 12-volt battery may be deteri-

orating. Have the vehicle 

inspected by your Toyota dealer.

461

7-2. Steps to take in an emergency

7

W

he

tro

ub

le

 ar

is

es

Stop the vehicle in a safe 
place on a hard, flat surface.

Set the parking brake.

Shift the shift lever to P.

Stop the hybrid system.

Turn on the emergency flash-
ers. (

P.438)

Turn off the power back door 
system. (

P.510)

If you have a flat tire

Your vehicle is equipped 
with a spare tire. The flat tire 
can be replaced with the 
spare tire.

For details about tires: 

P.404

WARNING

If you have a flat tire

Do not continue driving with a flat 

tire.

Driving even a short distance with 

a flat tire can damage the tire and 

the wheel beyond repair, which 

could result in an accident.

Before jacking up the 
vehicle

462

7-2. Steps to take in an emergency

Jack handle
Wheel nut wrench
Adapter socket
Jack
Spare tire
Wheel lock key (if equipped)

Location of the spare tire, jack and tools

WARNING

Using the tire jack

Observe the following precau-

tions.

Improper use of the tire jack may 

cause the vehicle to suddenly fall 

off the jack, leading to death or 

serious injury.

Do not use the tire jack for any 

purpose other than replacing 

tires or installing and removing 

tire chains.

Only use the tire jack that 

comes with this vehicle for 

replacing a flat tire.

Do not use it on other vehicles, 

and do not use other tire jacks 

for replacing tires on this vehi-

cle.

463

7-2. Steps to take in an emergency

7

W

he

tro

ub

le

 ar

is

es

When replacing tires on a vehi-
cle with wheel lock nuts, use the 
following procedures to remove 
and install the wheel lock nuts. 
The wheel lock key is stored in 
the tray inside the luggage com-

partment. Always return the 
wheel lock key to its original 
position after use, so that it does 
not get lost. (

P.462)

Removal

For ease of removal, the wheel 
lock nut should always be the 
first one loosened.

1

Place the wheel lock key on 
top of the wheel lock nut, 
turning until the wheel lock 
key and wheel lock nut pat-
terns engage.

2

Place the wheel nut wrench 
on the wheel lock key, and 
while applying pressure on 
the wheel lock key, loosen 
the wheel lock nut.

Installation

For ease of installation, the 
wheel lock nut should always be 
the last one tightened.

1

By hand, install a wheel lock 
nut on each wheel.

2

Place the wheel lock key on 
top of the wheel lock nut, 
turning until the wheel lock 
key and wheel lock nut pat-
terns engage.

3

Place the wheel nut wrench 
on the wheel lock key, and 
while applying pressure on 
the wheel lock key, tighten 
the wheel lock nut to the rec-
ommended torque.

WARNING

Put the jack properly in its jack 

point.

Do not put any part of your body 

under the vehicle while it is sup-

ported by the jack.

Do not start the hybrid system 

or drive the vehicle while the 

vehicle is supported by the jack.

Do not raise the vehicle while 

someone is inside.

When raising the vehicle, do not 

put an object on or under the 

jack.

Do not raise the vehicle to a 

height greater than that required 

to replace the tire.

Use a jack stand if it is neces-

sary to get under the vehicle.

When lowering the vehicle, 

make sure that there is no-one 

near the vehicle. If there are 

people nearby, warn them 

vocally before lowering.

Wheel lock nut (if 
equipped)

464

7-2. Steps to take in an emergency

1

Pull the strap upwards and 
open the center deck board.

2

Remove the center deck 
board.

3

Remove the jack cover.

4

Remove the jack after remov-
ing the hook.

1

Pull the strap upwards and 
open the center deck board.

NOTICE

When using a wheel lock key 

(if equipped)

Do not use an impact wrench. 

Using an impact wrench may 

cause permanent damage to 

wheel lock nut and wheel lock 

key. If in doubt about wheel lock 

application, contact your Toyota 

dealer.

Taking out the jack

Taking out the spare tire

 

 

 

 

 

 

 

Content      ..     26      27      28      29     ..