SsangYong Musso. Manual - part 26
9L-10 GLASS AND MIRRORS
Installation of Tailgate Glass
1. Clean the tailgate flange.
!
Do not reuse a gauze over 20 times.
!
Saturate the gauze in solvent (Isoprophyl alcohol).
!
Keep the cleaned surface to be cleaned.
!
Apply body primer to the cleaned and dry flange.
- If flange is oiled or contaminated, primer can not be
applied.
2. Apply primer after cleaning of tailgate flange.
!
Keep primers in a refrigerator(-2
°
C - +5
°
C).
!
Use sufficiently mixed primer in a mixer over 10 minutes.
!
Apply primer within 2 hours after opening.
!
Do not apply primers which is over its druation.
!
Apply evenly to the flange.
!
Duration : 3 minutes - 8 hours (reapply after 8 hours).
!
If primer is applied to the body, clean off immediately
with solvent.
!
Be careful not to contaminate other parts.
3. Clean the tailgate galss.
!
Clean the glass keeping 15mm from the edge of glass.
!
Do not reuse a gauze over 20 times.
!
Saturate the gauze in solvent(Isoprophyl alcohol).
!
Do not touch the cleaned galss surface.
!
Apply glass primer to the cleaned and dry glass surface.
If glass is oiled or contaminated, primer can not be
applied.
4. Apply primer to the tailgate glass.
!
Use sufficiently mixed primer in a mixer over 10 minutes.
!
Be careful not to contaminate other parts due to over
application.
!
Duration : 1 minute - 24 hours(reapply after 24 hours).
!
Never use the primer containing deposits or floating
materials.
!
Do not use primers which is over its duration.
!
Do not reuse a gauze over 20 times.
!
Apply evenly to glass.