Peugeot 208 (2024 year). Manual in english

Safety

To secure the child seat to the TOP TETHER:

vehicle, so as to avoid the seat interfering

► Remove and stow the head restraint before

with the operation of the seat belt.

installing the child seat on this seat (refit it once

the child seat has been removed).

An incorrectly installed child seat in a

► Pass the strap of the child seat behind the

vehicle compromises the child's safety in

seat backrest, centring it between the openings

the event of an accident.

for the head restraint rods.

Strictly observe the fitting instructions

► Secure the upper strap hook to ring B.

provided in the user guide supplied with the

► Tighten the upper strap.

child seat.

This system prevents the child seat from tipping

forwards in the event of a front impact.

When fitting an ISOFIX child seat to the

This ISOFIX mounting system provides fast,

left-hand rear seat of the bench seat,

For information about the options for

reliable and safe fitting of the child seat in the

before fitting the seat, first move the centre

fitting ISOFIX child seats in your vehicle,

vehicle.

rear seat belt towards the middle of the

refer to the summary table.

i-Size child seats

i-Size child seats have two latches that are anchored to the two rings A.

These i-Size child seats also have:

- either an upper strap that is attached to ring B.

- or a support leg that rests on the vehicle floor, compatible with the approved i-Size seat position.

Their role is to prevent the child seat from tipping forward in the event of a collision.

For more information on the ISOFIX mountings, refer to the corresponding section.

Safety

restraint), refer to the list of vehicles provided

Recommended child

"RÖMER KidFix i-Size"

in the child restraint user manual.

seats

Size: 100 - 150 cm

Ensure that the installation location of the

"RÖMER Baby-Safe 3 i-Size"

child restraint system inside the vehicle is

Size: 40 - 83 cm

correct.

Refer to the summary table for the installation

of child seats.

From 3.5 to 12 years

(from 15 to 36 kg)

Can be installed with or without ISOFIX

From birth to 15 months

mountings.

(up to 13 kg)

The child is restrained by the seat belt.

With or without its ISOFIX base.

Suitable for "rearward facing" installation only.

"GRACO Booster"

Size: over 135 cm

"RÖMER TriFix 2 i-Size"

Size: 76 - 105 cm

(from 22 to 36 kg)

The child is restrained by the seat belt.

From 15 months to 4 years

(from 9 to 22 kg)

Please follow the child restraint

Installed with ISOFIX and Top Tether

manufacturers' instructions for installing

mountings.

the appropriate child restraint in the vehicle.

Suitable for "forward facing" installation only.

For the semi-universal or vehicle-specific

child restraint (ISOFIX or belt-type child

Safety

Summary table for installation of universal, ISOFIX and i-Size child seats

In compliance with European regulations, this table indicates the options for installing child seats secured using the seat belt and universally approved (a)

as well as the largest ISOFIX and i-Size child seats on seat positions equipped with ISOFIX mountings in the vehicle.

Seat numbers

Front seats (b) (j)

Rear seats (b)

Front passenger airbag

Deactivated "OFF"

Activated "ON" (d)

(c)

Position compatible with a universal (a)

yes (e) (h) (m)

yes

yes (k)

yes

child seat

Rearward facing

Position compatible with a universal (a)

yes (f) (h) (m)

yes

yes (k)

yes

child seat

Forward facing

Position compatible with an i-Size child

yes

seat

Rearward facing

Position compatible with an i-Size child

yes

seat

Forward facing

Position equipped with a Top Tether hook

yes

Safety

Seat numbers

Front seats (b) (j)

Rear seats (b)

Front passenger airbag

Deactivated "OFF"

Activated "ON" (d)

(c)

"Carrycot" type of child seat

(L1 / L2)

"Rearward facing" ISOFIX child seat

R3 (g) (i)

(R1 / R2 / R3)

"Forward facing" ISOFIX child seat

(F2 / F2X / F3)

"Booster" child seat

B3 (l)

(B2 / B3)

Rules:

(a)

Universal child seat: child seat that can be

(d)

Only a "forward facing" child seat is

- A position that is i-Size compatible is also

installed in all vehicles using the seat belt.

authorised at this seat position with the front

compatible for R1, R2 and F2X, F2, B2.

passenger's airbag activated ("ON").

(b)

Depending on version, refer to the

- A position that is R3 compatible is also

legislation in force in your country before

(e)

For a "rearward facing" and/or "forward

compatible for R1 and R2.

installing a child in this seat position.

facing" universal child seat (U) in groups

- A position that is R2 compatible is also

0, 0+, 1, 2 or 3, or dedicated to children

compatible for R1.

(c)

To install a "rearward facing" child seat

between 40 and 150 cm in size.

- A position that is F3 compatible is also

at this seat position, the front passenger's

compatible for F2X and F2.

airbag MUST be deactivated ("OFF").

(f)

For a "forward facing" universal child seat

- A position that is B3 compatible is also

(UF) in groups 1, 2 or 3, or dedicated to

compatible with B2.

children between 76 and 150 cm in size.

Safety

and/or "forward facing" (U) for all sizes and

(g)

Adjust the front passenger seat to the fully

weight groups.

forward longitudinal position.

Seat position suitable for the installation

(h)

For a seat with height adjustment, set it

of a child seat secured using the seat belt

to the highest and fully back longitudinal

and universally approved "forward facing"

position.

(UF) for groups 1, 2 and 3, or dedicated to

children between 76 and 150 cm in size only.

(i)

Adjust the height-adjustable front driver seat

Seat position authorised for the

to the maximum height position.

installation of an i-Size child seat.

(j)

Seats not fitted with ISOFIX compliant

Seat position not suitable for the

mountings.

installation of a child seat with support

leg.

(k)

A child seat with a support leg must never

Seat position authorised for the

be installed on the centre rear passenger

installation of a "forward facing" i-Size

seat.

child seat.

(l)

Do not fold down the backrest.

Presence of a Top Tether anchorage

point at the rear of the backrest,

(m) For a seat without height adjustment, the

authorising the installation of an universal

backrest must be in an upright position and

ISOFIX child seat.

the seat in fully back longitudinal position.

Presence of a Top Tether anchorage

point at the rear of the backrest,

authorising the installation of a "forward facing"

universal ISOFIX child seat.

Key

"Rearward facing" ISOFIX child seat:

Seat position where the installation of a

child seat is forbidden.

- R1: ISOFIX child seat for a baby.

Front passenger airbag

- R2: ISOFIX reduced size child seat.

deactivated.

- R3: ISOFIX large size child seat.

Front passenger airbag activated.

"Forward facing" ISOFIX child seat:

Seat position suitable for the installation

- F2X: ISOFIX child seat for toddlers.

of a child seat secured using the seat belt

- F2: ISOFIX reduced height child seat.

and universally approved "rearward facing"

- F3: ISOFIX full height child seat.

Safety

Booster child seat:

► To deactivate the child lock, turn the key in

Activation/Deactivation

the opposite direction.

► With the ignition on, press the corresponding

- B2: reduced width booster seat.

Do not confuse the child lock control,

button to activate/deactivate the child lock

- B3: full width booster seat.

which is red, with the back-up locking

(confirmed by the corresponding indicator lamp

Seat position authorised for the

control, which is black.

coming on/going out).

installation of an ISOFIX child seat.

The activation/deactivation of the child lock is

Seat position where the installation of an

also indicated by the display of a message.

ISOFIX child seat is forbidden.

For seat adjustments, refer to the summary table

Any other status of the indicator lamp

"Installing universal, ISOFIX and i-Size child

indicates a malfunction of the electric

seats".

child lock.

Have it checked by a PEUGEOT dealer or a

qualified workshop.

Manual child lock

With the child lock activated, it is still

possible to open the rear doors from

Electric child lock

The system prevents a rear door from being

outside and/or to operate the rear electric

opened using its interior handle.

windows from the driver's door.

The red control is located on the edge of each

rear door (marked by a label).

This system prevents the opening of the rear

This system is independent and in no

doors using their interior handles.

circumstances does it take the place of

Activation/Deactivation

the central locking control.

Check the status of the child lock each time

you switch on the ignition.

Always keep the electronic key with you when

leaving the vehicle, even for a short time.

In the event of a serious impact, the electric

child lock is switched off automatically to

permit the exit of the rear passengers.

► To activate the child lock, turn the built-in key

in the red control as far as possible:

• To the right on the left-hand rear door.

• To the left on the right-hand rear door.

Driving

Driving recommendations

Never park the vehicle and never

On flooded roads

leave the engine running on a

We strongly advise against driving on flooded

► Observe the driving regulations and remain

flammable surface (e.g. dry grass, dead

roads, as this could cause serious damage to the

vigilant whatever the traffic conditions.

leaves). The vehicle exhaust system is very

engine or gearbox, as well as to your vehicle's

► Monitor your environment and keep your

hot, even several minutes after the engine

electrical systems.

hands on the wheel to be able to react to

stops. Risk of fire!

anything that may happen any time.

► Drive smoothly, anticipate the need for

Never drive on surfaces covered with

braking and maintain a longer safety distance,

vegetation (e.g. tall grass,

especially in bad weather.

accumulated dead leaves, crops, debris)

► Stop the vehicle before performing operations

such as a field, a country lane overgrown

that require sustained attention (e.g. settings).

with bushes or a grassy verge.

► During long trips, take a break every 2 hours.

This vegetation could come into contact with

If the vehicle absolutely must drive through a

the vehicle's exhaust system or other systems

Important!

flooded section of road:

which are very hot. Risk of fire!

► Check that the depth of the water does not

Never leave the engine running in a

exceed 15 cm, taking account of waves that

closed space without sufficient

Make sure you do not leave any item in

might be generated by other users.

ventilation. Internal combustion engines emit

the passenger compartment which could

► Deactivate the Stop & Start function.

toxic exhaust gases such as carbon

act like a magnifying glass under the effect of

► Drive as slowly as possible without stalling. In

monoxide. Danger of poisoning and death!

the sun's rays and cause a fire. Risk of fire or

all cases, do not exceed 6 mph (10 km/h).

damage to interior surfaces!

► Do not stop and do not switch off the engine.

In very severe wintry conditions

On leaving the flooded road, as soon as safety

(temperature below -23°C), let the engine

Never leave the vehicle unattended,

conditions allow, make several light brake

run for 4 minutes before moving off, to ensure

with the engine running. If you have to

applications to dry the brake discs and pads.

the correct operation and durability of the

leave your vehicle with the engine running,

If in doubt about the state of your vehicle,

mechanical components of your vehicle

apply the parking brake and put the gearbox

contact a PEUGEOT dealer or a qualified

(engine and gearbox).

or drive selector into neutral or position N or P

workshop.

(depending on version).

Never drive with the parking brake

applied. Risk of overheating and

Never leave children inside the vehicle

damaging the braking system!

unsupervised.

Driving

Noise (Electric)

Do not exceed the maximum towable

If a genuine PEUGEOT towing device is

weights.

used, the rear parking sensors will be

On the outside

At altitude: reduce the maximum load by

deactivated automatically to avoid activating

Due to the vehicle’s quiet operation when

10% per 1,000 metres of altitude; the lower

the audible signal.

driving, the driver must pay particular attention.

air density at high altitudes decreases engine

When manoeuvring, the driver must always

performance.

When driving

check the vehicle's immediate surroundings.

At speeds of up to 19 mph (30 km/h), the

New vehicle: do not tow a trailer until the

Cooling

pedestrian horn warns other road users of the

vehicle has driven at least 620 miles

Towing a trailer uphill causes the coolant

vehicle’s presence.

(1,000 kilometres).

temperature to increase. The maximum towable

Cooling the traction battery

load depends on the gradient and the exterior

The cooling fan comes on during

If the outside temperature is high, let the

temperature. The fan’s cooling capacity does not

charging to cool the on-board charger and the

engine idle for 1 to 2 minutes after the

increase with engine speed.

traction battery.

vehicle comes to a stop, to help it to cool.

► Reduce speed and lower the engine speed to

limit the amount of heating produced.

On the inside

► Pay constant attention to the coolant

Before setting off

temperature.

During use, you may hear certain perfectly

Nose weight

If this warning lamp and the STOP

normal noises specific to electric vehicles, such

warning lamp come on, stop the

as:

► Distribute the load in the trailer so that the

vehicle and switch off the engine as soon as

- Traction battery relay when starting.

heaviest items are located as close as possible

possible.

- Vacuum pump when braking.

to the axle, and the nose weight (at the point

- Vehicle tyres or aerodynamics when driving.

where it joins your vehicle) approaches the

Brakes

- Jolting and knocking noise during hill starts.

maximum permitted, without exceeding it.

Using the engine brake is recommended to limit

Tyres

the overheating of the brakes. Braking distances

Towing

are increased when towing a trailer.

► Check the tyre pressures of the towing

Driving with a trailer places greater

vehicle and of the trailer, observing the

Side wind

demands on the towing vehicle and

recommended pressures.

Bear in mind that the vehicle will be more

particular care must be taken.

Lighting

susceptible to wind when towing.

► Check the electrical signalling on the trailer

and the headlamp beam height of your vehicle.

Driving

In certain cases, you may need to apply

Anti-theft protection

2. Ignition on

significant force to move the steering

Steering column unlocked, ignition on,

wheel (e.g. wheels turned to full lock).

switching the engine on.

Electronic immobiliser

3. Starting

The keys contain a code, which must be

► With a petrol engine, operate the starter

recognised by the vehicle before starting is

motor by turning the key to position 3 without

Avoid attaching heavy objects to the key

possible.

pressing the accelerator pedal, until the engine

or the remote control. This would weigh

If the system malfunctions, indicated by the

starts. Once the engine has started, release the

down on its shaft in the ignition switch and

display of a message, the engine will not start.

key and allow it to return to position 2.

could cause a malfunction.

Contact a PEUGEOT dealer.

Petrol engines

Ignition on position

After a cold start, preheating the catalytic

Starting / Switching off the

converter can cause noticeable engine

It allows the use of the vehicle's electric

vibrations, for anything up to 2 minutes

equipment or the charging of accessories.

engine with the key

(accelerated idle speed).

Once the state of charge of the battery drops to

the reserve level, the system switches to energy

Key ignition switch

economy mode. The power supply is cut off

In mild conditions, do not leave the

automatically to preserve the remaining battery

engine to warm up while stationary, but

charge.

move off straight away and drive at moderate

speed.

Starting the engine

With the parking brake applied:

If the engine does not start straight away,

► With a manual gearbox, place the gear lever

switch off the ignition. Wait a few

in neutral then fully depress the clutch pedal.

seconds before operating the starter motor

► With an automatic gearbox, place the gear

again. If the engine does not start after a few

selector in mode N or P then depress the brake

attempts, do not keep trying - risk of

pedal.

damaging the starter motor and the engine!

► Insert the key into the ignition switch; the

Contact a PEUGEOT dealer or a qualified

It has 3 positions:

system recognises the code.

workshop.

1. Stop

► Unlock the steering column by simultaneously

Inserting/removing the key, steering column

turning the steering wheel and the key.

locked.

Switching off the engine

► Immobilise the vehicle.

Driving

► With the engine at idle, turn the key to

Key left in

Starting

position 1.

When the driver's door is opened, a

► Remove the key from the ignition switch.

message is displayed, accompanied by an

► To lock the steering column, turn the steering

audible signal, if the key has been left in the

wheel until it locks.

ignition switch in position 1.

If the key has been left in the ignition switch

To facilitate unlocking of the steering

in position 2, the ignition will be switched off

column, it is recommended that the

automatically after one hour.

wheels be returned to the straight ahead

To switch the ignition back on, turn the key to

position before switching off the engine.

position 1, then back to position 2.

Never switch off the ignition before the

complete immobilisation of the vehicle.

► With a manual gearbox, place the gear lever

Starting/Switching off the

With the engine off, the braking and steering

in neutral and fully depress the clutch pedal.

assistance systems are also cut off - risk of

engine with Keyless Entry

► With an automatic gearbox, select mode P

loss of control of the vehicle!

or N and depress the brake pedal.

and Start

► Press the "START/STOP" button while

Check that the parking brake is correctly

The electronic key must be present in the

maintaining pressure on the pedal until the

applied, particularly on sloping ground.

passenger compartment.

engine starts.

When leaving the vehicle, keep the key in

The electronic key is also detected in the

In all circumstances, if one of the starting

your possession and lock the vehicle.

boot.

conditions is not met, a message is displayed.

If the electronic key is not detected, a

In some circumstances, a message indicates

message is displayed.

that it is necessary to turn the steering wheel

Energy economy mode

Move the electronic key so that the engine

while pressing the "START/STOP" button to

After the engine has stopped (position 1. Stop),

can be started or switched off.

assist unlocking of the steering column.

for a maximum combined duration of 30 minutes,

If there is still a problem, refer to the "Key

you can still use functions such as the audio and

Petrol engines

not detected - Back-up starting or Back-up

telematics system, courtesy lamps or dipped

After a cold start, pre-heating the

switch-off" section.

beam headlamps.

catalytic converter can cause noticeable

engine vibrations, for anything up to

For more information on Energy

2 minutes (accelerated idle speed).

economy mode, refer to the

corresponding section.

Driving

Hybrid engines

Never leave your vehicle with the

accompanied by the display of a warning

The vehicle always starts with the petrol

electronic key still inside.

message.

engine to ensure the efficiency of the catalytic

converter and the availability of the brake

Starting/Switching off the

Switching on the ignition

assist.

After a few moments, the petrol engine may

electric motor

without starting the engine

stop if the operating conditions allow (state

Starting

of charge of the traction battery, external

temperature, torque demand, selected driving

The drive selector must be in mode P.

mode).

► Fully depress the brake pedal and briefly

press the "START/STOP" button.

► Keep your foot on the brake pedal until the

If the engine stalls, release the clutch

READY indicator lamp comes on and an audible

pedal and fully depress it again, the

signal is emitted, indicating that the vehicle is

engine will restart automatically.

ready to drive.

► With your foot on the brake, press the

Switching off

"Unlock" button and select mode D/B or R.

► Release the brake pedal, then accelerate.

With the electronic key in the passenger

► Immobilise the vehicle using the parking

On starting, the instrument panel lights up and

compartment, pressing the "START/STOP"

brake.

the power indicator needle or cursor moves

button, without depressing any of the pedals,

► With a manual gearbox, ideally put the gear

to the "neutral" position. The steering column

allows the ignition to be switched on without

lever into neutral.

automatically unlocks (you may hear a sound

starting the engine.

► With an automatic gearbox, ideally select

and feel the steering wheel move).

► Press this button again to switch off the

mode P or N.

ignition and allow the vehicle to be locked.

► Press the "START/STOP" button.

Switching off

In some circumstances, it is necessary to turn

► Press the "START/STOP" button.

Key not detected

the steering wheel to lock the steering column.

Before exiting the vehicle, check that:

If the vehicle is not immobilised, the

- The drive selector is in mode P.

Back-up starting

engine will not stop.

- The READY indicator lamp is off.

A back-up reader is fitted to the steering column,

If the driver's door is opened while the

to enable the engine to be started if the system

With the engine off, the braking and

required conditions for stopping are not

fails to detect the key in the recognition zone, or

steering assistance systems are also cut

satisfied, an audible signal is emitted,

if the battery in the electronic key is flat.

off - risk of loss of control of the vehicle!

Driving

appears in the instrument panel when closing a

When driving the vehicle, if this warning

door or trying to switch off the engine.

lamp and the STOP warning lamp come

► To confirm the instruction to switch off the

on, accompanied by an audible signal and the

engine, press the "START/STOP" button for

display of a message, this means that the

approximately 5 seconds.

parking brake is still applied or has not been fully

In the event of a fault with the electronic key,

released.

contact a PEUGEOT dealer or a qualified

workshop.

Application

► Place and hold the remote control against the

► Pull the parking brake lever up to immobilise

back-up reader.

Emergency switch-off

the vehicle.

► With a manual gearbox, place the gear lever

In case of emergency only, the engine can be

in neutral, then fully depress the clutch pedal.

When parking on a slope, turn the

switched off without conditions (even when

► With an automatic gearbox or a drive

wheels against the kerb, apply the

driving).

selector, select mode P, then depress the brake

parking brake, engage a gear and switch off

► Press the "START/STOP" button for about

pedal.

the ignition.

5 seconds.

► Press the "START/STOP" button.

In this case, the steering column locks as soon

The engine starts.

as the vehicle stops.

Electric parking brake

Back-up switch-off

In automatic mode, this system applies the

Manual parking brake

parking brake when the engine is switched off

and releases it when the vehicle moves off.

Release

If the electronic key is not detected or is no

► Pull the parking brake lever up slightly, press

At any time, with the engine running:

longer in the recognition zone, a message

the release button, then lower the lever fully.

► To apply the parking brake, briefly pull the

control.

Driving

► To release it, briefly push the control while

Manual operation

pressing the brake pedal.

Automatic mode is activated by default.

Manual release

This automatic operation can be deactivated in

With the ignition on or engine running:

certain situations.

► Press the brake pedal.

► While maintaining pressure on the brake

Indicator lamp

pedal, briefly push the control.

This indicator lamp comes on both on the

Before leaving the vehicle, check that the

instrument panel and on the control to

If the brake pedal is not depressed, the

parking brake is applied: the parking

confirm that the parking brake has been applied,

parking brake is not released and a

brake indicator lamps on the instrument panel

accompanied by display of the message

message is displayed.

and the control must be on fixed.

"Parking brake applied".

If the parking brake is not applied, there is an

The indicator lamp goes out to confirm the

audible signal and a message is displayed on

Manual application

release of the parking brake, accompanied by

opening the driver's door.

With the vehicle stationary:

the display of the message "Parking brake

► Briefly pull the control.

released".

Never leave a child alone inside the

The control indicator lamp flashes to confirm the

The indicator lamp flashes in response to a

vehicle, as they could release the parking

application request.

manual request to apply or release the brake.

brake.

In the event of a battery failure, the

Automatic operation

electric parking brake will not operate.

When the vehicle is parked: on a

As a safety measure, with a manual gearbox,

Automatic release

steep slope, heavily loaded or during

if the parking brake is not applied, immobilise

towing

First ensure that the engine is running and that

the vehicle by engaging a gear.

With a manual gearbox, turn the wheels

the driver's door is closed.

As a safety measure, with an automatic

toward the pavement and engage a gear.

The electric parking brake gradually releases

gearbox or drive selector, if the parking brake

With an automatic gearbox or a drive selector,

automatically as the vehicle moves off.

is not applied, immobilise the vehicle by

turn the wheels toward the pavement and

With a manual gearbox

placing the supplied chock against one of the

select mode P.

► Fully depress the clutch pedal and engage

wheels.

When towing, the vehicle is approved for

first gear or reverse.

Contact a PEUGEOT dealer or a qualified

parking on slopes of up to 12%.

► Depress the accelerator pedal and release

workshop.

the clutch pedal.

With an automatic gearbox

► Depress the brake pedal.

Driving

► Select mode D, M or R.

Special cases

Deactivating automatic

► Release the brake pedal and depress the

operation

accelerator pedal.

Immobilising the vehicle with the

With a drive selector

In some situations, for example when it is

engine running

► Depress the brake pedal.

extremely cold or when towing (e.g. caravan,

To immobilise the vehicle with the engine

► Select mode D, B or R.

breakdown), it may be necessary to deactivate

running, briefly pull the control.

► Release the brake pedal and depress the

automatic operation of the system.

accelerator pedal.

► Start the engine.

Parking the vehicle with the brake

► Use the control to apply the parking brake, if

With an automatic gearbox or drive

released

it is released.

selector, if the brake does not release

► Take your foot fully off the brake pedal.

In very cold conditions (ice), applying the

automatically, check that the front doors are

► Push the control for 10 to a maximum of

parking brake is not recommended.

properly closed.

15 seconds.

To immobilise the vehicle, engage a gear or

► Release the control.

place the chocks against one of the wheels.

When stationary with the engine running,

► Depress and hold the brake pedal.

do not depress the accelerator pedal

► Pull the control for 2 seconds.

With an automatic gearbox or drive

unnecessarily. Risk of parking brake release.

This indicator lamp on the instrument

selector, mode P is automatically

panel comes on to confirm deactivation of

selected when the ignition is switched off. The

the automatic functions.

Automatic application

wheels are blocked.

► Release the control and the brake pedal.

With the vehicle stationary, the parking brake

For more information on Free-wheeling, refer

From this point onwards, only the manual

is applied automatically when the engine is

to the corresponding section.

functions, using the control, allow the parking

switched off.

brake to be applied and released.

With an automatic gearbox or a drive

It is not applied automatically if the

► Follow this procedure again to reactivate

selector, if you open the driver's door

engine stalls or enters STOP mode with

automatic operation (confirmed by the indicator

while mode N is engaged, an audible signal

Stop & Start.

lamp on the instrument panel going out).

will sound and mode P will be engaged. The

audible signal stops when the driver's door is

Emergency braking

In automatic mode, the parking brake

closed.

can be manually applied or released at

If depressing the brake pedal fails to provide

any time using the control.

effective braking or in exceptional circumstances

(e.g. driver unwell, assisted driving), the vehicle

can be braked by sustained pulling on the

electric parking brake control. Braking continues

Driving

for as long as the control is kept pulled, and

Only engage reverse gear when the

ceases when the control is released.

vehicle is stationary with the engine at

The ABS and DSC systems stabilise the vehicle

idle.

during emergency braking.

If emergency braking malfunctions, the message

As a safety precaution and to facilitate

"Parking brake fault" will be displayed on the

starting the engine:

engine starting:

instrument panel.

- Always select neutral.

► Always select neutral.

If the ABS and DSC systems

- Depress the clutch pedal.

► Press the clutch pedal.

malfunction, indicated by lighting

one or both warning lamps on the instrument

panel, the vehicle’s stability is no longer ensured.

6-speed manual gearbox

Automatic gearbox (EAT6)

► In this case, ensure the vehicle's stability by

successive and repeated "pull-release" actions

6-speed automatic gearbox which offers a choice

Engaging 5^th or 6^th gear

between the comfort of automatic operation or

on the electric parking brake control until the

vehicle comes to a complete stop.

► Move the gear selector fully to the right to

manual gear changing.

engage 5^th or 6^th gear.

Two driving modes are available:

- Automatic operation for electronic

5-speed manual gearbox

Failure to follow this instruction could

management of the gears by the gearbox.

cause permanent damage to the gearbox

- Manual operation for sequential changing of

(inadvertent engagement of 3^rd or 4^th gear).

Engaging reverse gear

the gears by the driver.

Engaging reverse gear

► Fully depress the clutch pedal.

► Push the gear lever fully to the right, then

backwards.

► Raise the ring under the knob and move the

gear selector to the left, then forwards.

Driving

Gear selector module

Neutral

When carrying out maintenance with the

engine running, apply the parking brake and

Drive (automatic operation)

select position P.

1...6.

Gear engaged during manual operation

Instruction not accepted during manual

operation

Automatic operation

► Select position D for automatic changing of

Starting the vehicle

the six gears.

► With your foot on the brake pedal,

The gearbox then operates in auto-adaptive

Park

select position P or N.

mode, without any intervention on the part of the

- Vehicle immobilised, parking brake

► Start the engine.

driver. It continuously selects the most suitable

applied or released.

If the conditions are not met, you will hear an

gear according to the driving style, the road

- Engine starting.

audible signal, accompanied by the display of a

profile and the load in the vehicle.

Reverse

message.

For maximum acceleration without touching the

- Reversing manoeuvres, vehicle

► With the engine running, depress the brake

selector, press the accelerator fully down (kick-

stationary, engine at idle.

pedal.

down). The gearbox changes down automatically

Neutral

► Release the parking brake, unless it is set to

or holds the gear selected until the maximum

- Vehicle immobilised, parking brake

automatic mode.

engine speed is reached.

applied.

► Select position R, D or M.

When braking, the gearbox changes down

- Engine starting.

► Gradually release the brake pedal.

automatically to provide effective engine braking.

Automatic operation

The vehicle moves off immediately.

If you release the accelerator sharply, the

M. +/-

Manual operation

gearbox will not shift to a higher gear for safety

If position N is selected inadvertently

► To shift up/down through the gears,

reasons.

while driving, allow the engine to return

push the control backwards/forwards.

to idle, then select position D to accelerate.

Never select position N while the vehicle

is moving.

Information displayed on

Never select positions P or R unless the

When the engine is running at idle with

the instrument panel

the brakes released, if position R, D or M

vehicle is completely stationary.

When a position is selected in the grid with the

is selected, the vehicle moves off even

gear selector, the corresponding indicator lamp

without the accelerator being pressed.

Manual operation

lights up on the instrument panel.

Never leave children unattended in the

Park

vehicle when the engine is running.

To limit fuel consumption during an

Reverse

extended standstill with the engine

Driving

running (for example, in a traffic jam), set the

In both cases, apply the parking brake to

Automatic gearbox (EAT8)

gear selector to N and apply the parking

immobilise the vehicle, unless it is set to

Automatic 8-speed gearbox with push selector.

brake.

automatic mode.

It also offers a manual mode with gear changes

► Selecting position M enables sequential

If the gear selector is not in position P,

via control paddles located behind the steering

shifting between the six gears.

when the driver's door is opened or

wheel.

► To shift up/down through the gears, push the

approximately 45 seconds after the ignition is

control backwards/forwards.

switched off, an audible signal sounds and a

Push selector

The gearbox only changes gear if the vehicle

message appears.

speed and engine speed conditions allow;

► Return the gear selector to P; the audible

otherwise, the rules for automatic operation are

signal stops and the message disappears.

temporarily applied.

D disappears, and the gears engaged

Malfunction

appear in succession on the instrument

In the event of a malfunction, this warning

panel.

lamp comes on and a message is

If the engine speed is too low or too high, the

displayed, when the ignition is switched on.

selected gear flashes for a few seconds, then the

In this case, the gearbox goes into back-up

gear actually engaged is shown.

mode and is locked in 3^rd gear. You may feel a

It is possible to change from position D to

significant jolt (without risk to the gearbox) when

P. Auto Park

position M at any time.

changing from P to R and from N to R.

Press this button to switch to Parking mode.

When the vehicle is stationary or moving

Do not exceed 62 mph (100 km/h), local speed

For parking the vehicle: the front wheels are

very slowly, the gearbox selects gear M1

restrictions permitting.

blocked.

automatically.

Have it checked by a PEUGEOT dealer or a

R. Reverse

This symbol is displayed if a gear is not

qualified workshop.

N. Neutral

engaged correctly (gear selector between

To free-wheel and move the vehicle, with the

two positions).

There is a risk of damaging the gearbox:

ignition off.

- If the accelerator and brake pedals are

For more information on Free-wheeling, refer

Switching off the vehicle

depressed simultaneously.

to the corresponding section.

Before switching off the engine, it is possible to

- In the event of a battery failure, forcing the

D. Driving in automatic mode

engage position P or N to place the gearbox in

selector from position P to another position.

The gearbox manages gear changes

neutral.

according to the style of driving, the road

profile and the vehicle load.

Driving

an alert message will be displayed on the

M. Driving in manual mode

instrument panel.

Press this button to switch to manual mode.

The driver changes gear using the steering-

With the engine running and the brakes

mounted controls.

released, if R, D or M is selected, the

► In mode N, with your foot on the brake pedal,

vehicle moves off, even without pressing the

push without passing the point of resistance:

accelerator pedal.

• Forwards, mode R is selected.

Never depress the accelerator and brake

• Backwards, mode D is selected.

pedals at the same time - risk of damage to

Release the selector fully after each push; it

the gearbox!

will then return to its initial position.

If you open the driver's door while mode

Special cases

► Pull the "+" or "-" paddle towards you and

N is engaged, an audible signal will

To avoid mode N (quick change from D to R and

release to shift up or down a gear, respectively.

sound and mode P will be engaged. The

back again):

audible signal stops when the driver's door is

Information displayed on the

► In mode R, push backwards past the point of

closed.

resistance, mode D is selected.

instrument panel

► In mode D, push forwards past the point of

When the ignition is switched on, the gearbox

At speeds below 3 mph (5 km/h),

resistance, mode R is selected.

status is displayed on the instrument panel:

opening the driver’s door will engage

► To return to mode N, push without passing

Parking

mode P - risk of sudden braking!

the point of resistance.

Reverse

Neutral

Steering-mounted controls

D1...8

Automatic forward gear

In the event of battery failure, it is

(Depending on equipment)

M1...8

Manual forward gear

essential to place the chock(s) supplied

with the tool kit against one of the wheels to

In mode M or D, the steering-mounted control

The state of the gearbox remains displayed on

immobilise the vehicle.

paddles can be used to change gear manually.

the instrument panel for a few seconds after

They cannot be used to select neutral or to

switching off the ignition.

engage or disengage reverse gear.

Special aspects of automatic mode

Operation

The gearbox selects the gear that provides

Only appropriate mode change instructions are

optimal performance based on ambient

validated.

temperature, road profile, vehicle loading and

With the engine running, if it is necessary to

driving style.

depress the brake pedal to change modes,

Driving

For maximum acceleration, press the accelerator

However, in mode N, mode P will be engaged

Go to a PEUGEOT dealer or a qualified

fully down (kick-down). The gearbox changes

after a delay of 5 seconds (time to enable free-

workshop.

down automatically or holds the selected gear

wheeling mode).

In some cases, the selector indicator lamps may

until the maximum engine speed is reached.

Check that mode P has been engaged and

no longer come on, but the gearbox state is still

Steering mounted controls allow the driver to

that the electric parking brake was applied

displayed on the instrument panel.

temporarily select a gear, if the vehicle speed

automatically; if not, apply it manually.

Major malfunction

and engine speed conditions permit.

The corresponding indicator lamps on the

This warning lamp comes on,

gear selector and the electric parking

Special aspects of manual mode

accompanied by the display of a

brake control must be on, as well as the indicator

message.

The gearbox only changes from one gear to

lamps on the instrument panel.

another if the vehicle speed and engine speed

You must stop the vehicle.

conditions permit.

Gearbox malfunction

Stop as soon as it is safe to do so and

This warning lamp comes on,

switch off the ignition.

Starting the vehicle

accompanied by an audible signal and

Contact a PEUGEOT dealer or a qualified

► Fully depress the brake pedal.

the display of a message.

workshop.

► Start the engine.

Go to a PEUGEOT dealer or a qualified

► With your foot on the brake pedal, push once

workshop.

or twice backwards to select automatic mode D,

Do not drive faster than 62 mph (100 km/h),

Automatic gearbox

or forwards to shift into reverse gear R.

keeping to the speed limit.

(Hybrid)

► Release the brake pedal.

Switching of the gearbox to back-up mode

► Accelerate gradually to automatically release

6-speed electrified dual-clutch automatic

Mode D locks in third gear.

the electric parking brake.

gearbox with push selector for hybrid vehicles.

The paddles on the steering wheel do not work

The vehicle moves off immediately.

It also offers a manual mode with gear changes

and mode M is no longer accessible.

via control paddles located behind the steering

Automatic gearbox

You may feel a significant jolt on engaging

wheel.

Never try to start the engine by pushing

reverse gear. This will not damage the gearbox.

It includes the 48 V electric motor, which

the vehicle.

improves the performance of the petrol engine,

Selector malfunction

reduces fuel consumption and drives in

Switching the vehicle off

Minor malfunction

all-electric.

Regardless of the current gearbox mode,

This warning lamp comes on,

mode P is immediately engaged automatically

accompanied by the display of a message

when the ignition is switched off.

and an audible signal.

Drive carefully.

Driving

Push selector

► In mode N, with your foot on the brake pedal,

push without passing the point of resistance:

• Forwards, mode R is selected.

• Backwards, mode D is selected.

Release the selector fully after each push; it

will then return to its initial position.

Special cases

To avoid mode N (quick change from D to R and

back again):

► In mode R, push backwards past the point of

resistance, mode D is selected.

► Pull the "+" or "-" paddle towards you and

Auto Park

► In mode D, push forwards past the point of

release to shift up or down a gear, respectively.

Press this button to switch to Parking mode.

resistance, mode R is selected.

For parking the vehicle: the front wheels are

► To return to mode N, push without passing

Electric motor

blocked.

the point of resistance.

The electric motor included in the automatic

R. Reverse

Steering-mounted controls

gearbox, which is used for the first start, provides

N. Neutral

12 V power supply via the DC/DC converter and

To free-wheel and move the vehicle, with the

(Depending on equipment)

provides electric assistance to the petrol engine.

ignition off.

In mode M or D, the steering-mounted control

The electric motor has the following features:

For more information on Free-wheeling, refer

paddles can be used to change gear manually.

- Provide an additional torque to the gearbox,

to the corresponding section.

They cannot be used to select neutral or to

optimising the performance of the petrol engine.

D. Driving in automatic mode

engage or disengage reverse gear.

- Recover the kinetic energy of the deceleration

The gearbox manages gear changes

phases, converting it into electrical energy, which

according to the style of driving, the road

can be used for traction or for the power supply

profile and the vehicle load.

of electrical accessories installed on the vehicle.

The gearbox also manages braking when the

- Recharge the 48 V traction battery when the

accelerator pedal is released.

state of charge is too low.

M. Driving in manual mode

- Provide all-electric driving only.

Press this button to switch to manual mode.

These features are achieved through the

The driver changes gear using the steering-

following functions set of automatic operating

mounted controls.

mode:

- e-Boost.

100

Driving

- e-Creeping.

Operation

Special aspects of automatic mode

- e-Launch.

These functions respond to common driving

Only appropriate mode change instructions are

- e-Queueing.

situations where the electric motor is available

validated.

- e-Parking.

to provide additional power or zero-emission

With the engine running, if it is necessary to

A manual operating mode is also available

driving.

depress the brake pedal to change modes,

to activate/deactivate the restart of the petrol

an alert message will be displayed on the

These functions are only available if the

engine while driving: the e-Auto mode.

instrument panel.

traction battery is sufficiently charged.

When mode P or N is selected on the

These five functions cannot be deactivated.

With the engine running and the brakes

automatic gearbox, the noise level in the

released, if R, D or M is selected, the

engine compartment may increase due to the

e-Launch

vehicle moves off, even without pressing the

start of the charging phase of the traction

accelerator pedal.

With the petrol engine off, this function allows the

battery: this is normal and does not represent

Never depress the accelerator and brake

vehicle to run in electric mode without affecting

a malfunction.

pedals at the same time - risk of damage to

performance.

the gearbox!

By depressing the accelerator pedal, the vehicle

Information displayed on

starts to drive as soon as the mode D or R of the

If you open the driver's door while mode

automatic gearbox is selected.

the instrument panel

N is engaged, an audible signal will

e-Creeping

When the ignition is switched on, the gearbox

sound and mode P will be engaged. The

status is displayed on the instrument panel:

With the petrol engine off, by releasing the

audible signal stops when the driver's door is

brake pedal, this function allows the vehicle to

Parking

closed.

be moved forward or backward in electric mode

Reverse

without having to depress the accelerator pedal,

Neutral

At speeds below 3 mph (5 km/h),

as soon as the mode D or R of the automatic

Automatic forward gear

opening the driver’s door will engage

gearbox is selected.

M1...6

Manual forward gear

mode P - risk of sudden braking!

e-Queueing

The gear engaged is also displayed in Sport

mode.

This function makes it possible to follow a

In the event of battery failure, it is

However, in all-electric driving, the gear engaged

queue of vehicles with several stops followed

essential to place the chock(s) supplied

is not indicated.

by restarts of the vehicle, using the e-Creeping,

with the tool kit against one of the wheels to

The state of the gearbox remains displayed on

e-Launch and electric driving modes.

immobilise the vehicle.

the instrument panel for a few seconds after

switching off the ignition.

101

Driving

e-Parking

Using the steering wheel paddles also

However, in mode N, mode P will be engaged

causes the restarting of petrol engine.

after a delay of 5 seconds (time to enable free-

This function allows parking manoeuvres to be

If high traction is required, the driver can

wheeling mode).

carried out at reduced speed with the help of

deactivate the e-Auto mode using the touch

Check that mode P has been engaged and

the electric motor when the mode D or R of the

screen application.

that the electric parking brake was applied

automatic gearbox is selected.

automatically; if not, apply it manually.

e-Boost

The corresponding indicator lamps on the

Starting the vehicle

This function allows simultaneous operation

gear selector and the electric parking

of the petrol engine and the electric motor,

► Fully depress the brake pedal.

brake control must be on, as well as the indicator

combined with the automatic gearbox.

► Start the petrol engine by depressing the

lamps on the instrument panel.

By fully depressing the accelerator pedal ("kick-

brake pedal until the engine is running at a

down" function), when the traction battery is fully

stabilised engine speed.

Gearbox malfunction

charged, it is possible to exceed the torque of

► With your foot on the brake pedal, push once

This warning lamp comes on,

the petrol engine alone, thanks to the additional

or twice backwards to select automatic mode D,

accompanied by an audible signal and

torque provided by the electric motor.

or forwards to shift into reverse gear R.

the display of a message.

► Release the brake pedal.

Go to a PEUGEOT dealer or a qualified

Repeated use of the brake pedal causes

► Accelerate gradually to automatically release

workshop.

the restart of petrol engine to provide

the electric parking brake.

Do not drive faster than 62 mph (100 km/h),

braking assistance.

The petrol engine may stop after the first start if

keeping to the speed limit.

operating conditions allow (e.g. state of charge

Switching of the gearbox to back-up mode

Special aspects of manual mode

of the traction battery, external temperature,

efficiency of the catalytic converter, torque

Depending on the malfunction, the gearbox only

The gearbox only changes from one gear to

demand, selected driving mode, thermal comfort

shifts in odd or even gears, locks in one gear or

another if the vehicle speed and engine speed

of the passenger compartment).

loses some gears.

conditions permit.

Then, the vehicle moves off immediately in all-

The paddles on the steering wheel do not work

The petrol engine can also be switched off in

electric (e-Launch function).

and mode M is no longer accessible.

manual mode when stopped in traffic or when

You may feel a significant jolt on engaging

the accelerator pedal is released.

Switching the vehicle off

reverse gear. This will not damage the gearbox.

The all-electric potential of the driving mode

used (Normal or Eco) is also retained.

Regardless of the current gearbox mode,

mode P is immediately engaged automatically

when the ignition is switched off.

102

Driving

Selector malfunction

Drive selector (Electric)

N. Neutral

To move the vehicle with the ignition off and

Minor malfunction

so allow it to free-wheel.

This warning lamp comes on,

For more information on Free-wheeling, refer

accompanied by the display of a message

to the corresponding section.

and an audible signal.

D. Drive (automatic forward gear)

Drive carefully.

B. Brake (regenerative braking)

Go to a PEUGEOT dealer or a qualified

Regenerative braking (the button lights up to

workshop.

indicate its activation).

In some cases, the selector indicator lamps may

no longer come on, but the gearbox state is still

Information displayed on the

displayed on the instrument panel.

instrument panel

Major malfunction

The drive selector is a pulse selector with a

When the ignition is switched on, the drive

This warning lamp comes on,

regenerative braking function.

selector status is displayed on the instrument

accompanied by the display of a

The drive selector provides traction control

panel:

message.

based on the driving style, the road profile and

P : Park.

You must stop the vehicle.

the vehicle load.

R : Reverse.

Stop as soon as it is safe to do so and

With regenerative braking activated, it also

N : Neutral.

switch off the ignition.

manages engine braking when the accelerator

D : Drive (automatic forward gear).

Contact a PEUGEOT dealer or a qualified

pedal is released.

B : Brake (regenerative braking activated).

workshop.

P. Park

Button for parking the vehicle: the front

Operation

wheels are locked (the button lights up to

► In mode N, with your foot on the brake pedal,

indicate that it is activated).

push without passing the point of resistance:

R. Reverse

• Forwards, mode R is selected.

To engage reverse gear, with your foot on the

• Backwards, mode D is selected.

brake pedal.

Release the selector fully after each push; it

will then return to its initial position.

Special cases

To avoid mode N (quick change from D to R and

back again):

103

Driving

► In mode R, push backwards past the point of

regenerative braking may be temporarily

resistance, mode D is selected.

limited, resulting in less deceleration.

► In mode D, push forwards past the point of

The driver must remain alert to traffic

resistance, mode R is selected.

conditions and must always be ready to use

► To return to mode N, push without passing

the brake pedal.

the point of resistance.

With the brake pedal

Regenerative braking

When the brake pedal is depressed, the

With the Brake function and when

intelligent braking system automatically recovers

decelerating

some of the energy and uses it to recharge the

traction battery.

The Brake function emulates engine braking,

This energy recovery also reduces use of the

► Press the control to display the modes on the

slowing the vehicle with no need to depress the

brake pads, thereby limiting their wear.

instrument panel.

brake pedal. The vehicle slows more quickly

With an electric vehicle, when starting the

when the driver releases the accelerator pedal.

The driver may experience a different

vehicle, no mode can be selected until the

The energy recovered when the accelerator

sensation when depressing the brake

READY indicator lamp is displayed.

pedal is released is then used to partially

pedal compared to a vehicle without

When the message disappears, the selected

recharge the traction battery, thereby increasing

regenerative braking.

mode is activated and remains indicated on the

the vehicle's driving range.

instrument panel (except Normal mode).

The resulting deceleration of the vehicle

does not cause the brake lamps to come

Driving modes

For petrol/hybrid versions

on.

The driving modes available depend on the

Whenever the ignition is switched on, Normal

engine and equipment of the vehicle.

driving mode is selected by default.

► From mode D/B, move the push selector

Driving modes are selected using the following

backwards to activate/deactivate the function.

Normal

control:

D on the instrument panel is replaced with B.

To restore the default settings.

The system status is not saved when the ignition

Eco

is switched off.

To reduce energy consumption by reducing the

In some situations (e.g. battery full,

performance of the heating and air conditioning,

extreme temperatures), the amount of

without deactivating them.

104

Driving

Sport

For electric versions

Do not leave the vehicle while it is being

held temporarily by hill start assist.

With a manual gearbox: to obtain more dynamic

Each time the ignition is switched on, Normal

If someone needs to get out of the vehicle

driving with action on the power steering,

mode is selected by default.

with the engine running, apply the parking

accelerator and the possibility of displaying the

Normal

brake manually. Then check that the parking

vehicle’s dynamic settings on the instrument

This optimises the driving range and dynamic

brake indicator lamp and the P indicator lamp

panel.

performance.

in the electric parking brake control are on

With an automatic gearbox: to obtain more

To obtain maximum torque and power, depress

fixed.

dynamic driving with action on the power

the accelerator pedal fully.

steering, accelerator, gear changes and

possibility of displaying the vehicle’s dynamic

Eco

The hill start assist function cannot be

settings on the instrument panel.

deactivated. However, using the parking

Optimises energy consumption, by reducing

The selection of the Sport mode deactivates the

brake to immobilise the vehicle interrupts its

the output of the heating and air conditioning

Stop & Start function.

operation.

(without actually deactivating them) and limiting

Manual

both motor torque and power.

Permanent Manual mode with an automatic

Sport

Operation

gearbox.

Enables more dynamic driving, acting on the

This manual mode is accessed via the button M

power steering, accelerator and gear changes

of the push selector.

with a drive selector and the possibility of

To change gears manually using the control

displaying the vehicle’s dynamic settings on the

paddles on the steering wheel.

instrument panel.

For more information on Automatic gearbox

(EAT8), refer to the corresponding section.

Hill start assist

Coasting mode (Petrol)

Facing uphill, with the vehicle stationary,

This system keeps the vehicle briefly stationary

Depending on version or engine, with an

the vehicle is held for a short time when the

(for approximately 2 seconds) when making a hill

EAT8 gearbox and the gear selector in mode

driver releases the brake pedal:

start, while you transfer your foot from the brake

D, except in Sport mode, gradually and fully

- If first gear or neutral is engaged on a manual

pedal to the accelerator pedal.

releasing the accelerator pedal allows free-

gearbox.

The system is only active when:

wheeling which can save fuel.

- If mode D or M is selected on an automatic

- The vehicle is completely stationary, with your

A drop in engine speed is normal (rev counter

gearbox.

foot on the brake pedal.

at idle, drop in engine noise).

- If mode D or B is selected on the drive

- Certain slope conditions are met.

selector.

- The driver’s door is closed.

105

Driving

safety remain determining factors when choosing

The function does not affect the functionalities of

the best gear. Therefore, the driver remains

the vehicle, in particular the braking.

responsible for deciding whether or not to follow

the system’s advice.

Deactivation/Reactivation

The system cannot be deactivated.

By default, the function is activated when the

ignition is switched on.

With an automatic gearbox, the system is

only active in manual operation.

With Touch screen 10" & Bluetooth Radio

Facing downhill, with the vehicle stationary

& Telephone

and reverse gear engaged, the vehicle is held

The information appears on the

for a short time when the driver releases the

The settings are changed via the Driving

instrument panel, in the form of an arrow

brake pedal.

touch screen menu.

and the recommended gear.

With PEUGEOT Connect Radio / PEUGEOT

Malfunction

The system adapts the gear change

Connect Nav

If the event of a malfunction, these

instructions according to the driving

The settings are changed via the

warning lamps light up on the

conditions (e.g. slope, load) and driving style

Driving/Vehicle touch screen menu.

instrument panel, accompanied by the display of

(e.g. power demand, acceleration, braking).

With PEUGEOT i-Connect Advanced -

a message.

The system never suggests:

PEUGEOT i-Connect

Have it checked by a PEUGEOT dealer or a

- engaging first gear.

qualified workshop.

- engaging reverse gear.

The settings are changed via the ADAS

touch screen application or via the

Shortcuts for driving aids.

Gear shift indicator

Stop & Start (Petrol)

The display of a message on the instrument

This system is designed to reduce fuel

panel confirms the change of state.

The Stop & Start function puts the engine

consumption by recommending the most suitable

If the function is deactivated while the engine is

temporarily into standby - STOP mode - during

gear.

in STOP mode, it will restart immediately.

phases when the vehicle is stationary (e.g. red

Associated indicator lamps

lights, traffic jams). The engine automatically

Operation

restarts - START mode - as soon as the driver

Function activated: engine on standby

Depending on the driving situation and

indicates the intention of moving off again.

(STOP mode)

the vehicle's equipment, the system may

Primarily designed for urban use, the function

Function deactivated or malfunction

recommend skipping one or more gears.

is intended to reduce fuel consumption and

Gear engagement recommendations are

exhaust emissions as well as the noise level

not to be considered mandatory. Indeed, the

when stationary.

configuration of the road, the traffic density and

106

Driving

Opening the bonnet

Putting the engine into standby

After the engine has restarted, STOP

Before doing anything under the bonnet,

(STOP mode)

mode is not available until the vehicle

deactivate the Stop & Start system to avoid

has reached a speed of 5 mph (8 km/h).

The engine automatically enters standby mode

any risk of injury caused by the engine

as soon as the driver indicates their intention to

restarting automatically.

stop:

During parking manoeuvres, STOP mode

- With a manual gearbox: when you place

is not available for a few seconds after

the gear lever in neutral and release the clutch

coming out of reverse gear or turning the

pedal.

steering wheel.

- With an automatic gearbox: with the gear

selector in mode D or M, when the brake pedal

Driving on flooded roads

Restarting the engine (START mode)

is depressed until the vehicle stops or when the

Before entering into a flooded area, it is

The engine automatically restarts as soon as the

mode N is selected, with the vehicle stationary.

strongly recommended that you deactivate

driver indicates the intention of moving off again:

Time counter

the Stop & Start system.

With a manual gearbox: when the clutch pedal

For more information on Driving

A time counter adds up the time spent in standby

is fully depressed.

recommendations, particularly on flooded

during the journey. It is reset to zero every time

With an automatic gearbox:

roads, refer to the corresponding section.

the ignition is switched on.

- With the selector in mode D or M: when the

brake pedal is released.

Special cases

- With the selector in mode N and the brake

Operation

The engine will not go into standby if the

pedal released: when the mode D or M is

Main conditions for operation

conditions for operation are not met and in the

selected.

following cases:

- With the selector in mode P and the brake

- The driver’s door must be closed.

- Steep slope (ascending or descending).

pedal depressed: when the mode R, N, D or M

- The driver's seat belt must be fastened.

- Vehicle has not exceeded 6 mph (10 km/h)

is selected.

- The level of charge in the battery must be

since the last engine start (with the key or the

- When the reverse gear is engaged.

sufficient.

START/STOP button).

- The temperature of the engine must be within

Special cases

- Sport mode selected (depending on

its nominal operating range.

equipment).

The engine will restart automatically if the

- The outside temperature must be between

- Needed to maintain a comfortable temperature

conditions for operation are met again and in the

0°C and 35°C.

in the passenger compartment.

following cases:

- Demisting active.

- Deselecting the Sport mode (depending on

In these cases, this indicator lamp flashes

equipment).

for a few seconds, then goes off.

107

Driving

- With a manual gearbox: vehicle speed

The e-Auto mode can switch off the petrol

With Touch screen 10" & Bluetooth Radio

exceeds 2.5 mph (4 km/h).

engine in the following cases:

& Telephone

- With an automatic gearbox, in mode N, vehicle

- When the operating strategies permit.

The settings are changed via the Driving

speed exceeds 0.6 mph (1 km/h).

- Vehicle speed up to 90 mph (145 km/h).

touch screen menu.

In these cases, this indicator lamp flashes

- When the driver releases the accelerator

With PEUGEOT i-Connect Advanced -

for a few seconds, then goes off.

pedal in stabilised conditions or in deceleration.

PEUGEOT i-Connect

- During the stop phases.

Malfunctions

Restarting is only achieved by the belt starter

The settings are changed via the ADAS

In the event of a fault with the system, this

until the torque demand is available, if the

touch screen application or via the

warning lamp flashes for a few moments

traction battery is sufficiently charged. When the

Shortcuts for driving aids.

on the instrument panel, then remains on,

torque demand is insufficient, the petrol engine

The display of a message on the instrument

accompanied by the display of a message.

restarts.

panel confirms the change of state.

Have it checked by a PEUGEOT dealer or a

Function deactivated, this indicator lights

Using the steering wheel paddles also

qualified workshop.

up in the instrument panel.

causes the restarting of petrol engine.

The vehicle stalls in STOP mode

If high traction is required, the driver can

The e-Auto mode cannot switch off the petrol

deactivate the e-Auto mode using the

All of the instrument panel warning lamps come

engine in the following cases:

touch screen menu.

on if there is a fault.

- The state of charge is less than 30% of the

► Switch off the ignition then start the engine

traction battery energy.

again with the key or the START/STOP button.

- There is a need for vacuum brake assist

Tyre under-inflation

12 V battery

depending on the altitude.

The Stop & Start system requires a

- The Sport mode is selected.

detection

12 V battery of specific technology and

- Maintaining thermal comfort in the passenger

This system alerts the driver if one or more tyres

specification.

compartment (heating, air conditioning,

suffer a drop in pressure.

All work must be carried out only by a

demisting/defrosting).

The alert is raised when the vehicle is moving,

PEUGEOT dealer or a qualified workshop.

not when stationary.

Deactivation/Reactivation

It compares the information given by the wheel

By default, the function is activated when the

speed sensors with reference values, which

e-Auto mode (Hybrid)

ignition is switched on.

must be reinitialised every time the tyre

pressures are adjusted or a wheel changed.

The petrol engine stops when low power or

It takes into account the last values stored

torque is required and in stabilised conditions.

during the reinitialisation request. It is therefore

The petrol engine is restarted by the belt starter.

108

Driving

essential that the tyre pressure is correct during

Snow chains

blow-out. This is because analysis of the

the operation. This operation is the driver’s

The system does not have to be

values read by the wheel's speed sensors

responsibility.

reinitialised after fitting or removing snow

can take several minutes.

chains.

The alert may be delayed at speeds below

The tyre under-inflation detection cannot,

25 mph (40 km/h), or when adopting a sporty

in any circumstances, replace the need

driving mode.

for vigilance on the part of the driver.

Under-inflation alert

This system does not avoid the need to

This is signalled by the fixed illumination

The alert is kept active until the system is

regularly check the tyre pressures (including

of this warning lamp, accompanied by an

reinitialised.

the spare wheel), especially before a long

audible signal and, depending on equipment, the

journey.

display of a message.

Driving with under-inflated tyres, particularly

► Reduce speed immediately, avoid excessive

Reinitialisation

in adverse conditions (heavy load, high

steering movements and avoid sudden braking.

The system must be reinitialised after any

speed, long journey):

► Stop the vehicle as soon as it is safe to do

adjustment to the pressure of one or more tyres,

- worsens road-holding.

so.

and after changing one or more wheels.

- lengthens braking distances.

- causes premature wear of the tyres.

The loss of pressure detected may not

Before reinitialising the system, make

- increases energy consumption.

always cause visible deformation of the

sure that the pressures of the four tyres

tyre.

are correct for the conditions of use of the

Do not rely on just a visual check.

vehicle and conform to the values written on

The inflation pressures defined for the

vehicle can be found on the tyre pressure

the tyre pressure label.

► Using a compressor, such as the one in

label.

Check the pressures of the four tyres before

the temporary puncture repair kit, check the

For more information on the Identification

performing the reinitialisation.

pressures of all four tyres when cold.

markings, refer to the corresponding section.

The system does not advise if a pressure is

► If it is not possible to carry out this check

incorrect at the time of reinitialisation.

immediately, drive carefully at reduced speed.

Checking tyre pressures

► In the event of a puncture, use the

With Touch screen 10" & Bluetooth Radio

This check should be done monthly

temporary puncture repair kit or the spare wheel

& Telephone

when the tyres are "cold" (vehicle stopped for

(depending on equipment).

1 hour or after a journey of less than 6 miles

With the vehicle stationary, the system

Driving too slowly may not ensure

(10 km) at moderate speeds).

can be reinitialised via the Driving touch

optimum monitoring.

Otherwise, add 0.3 bar to the pressures

screen menu.

The alert is not immediately triggered in the

shown on the label.

event of a sudden loss of pressure or tyre

109

Driving

With PEUGEOT Connect Radio / PEUGEOT

has been replaced by one of uniform size (the

Manoeuvring aids

Connect Nav

same as the others), the pressure readjusted

The driver must always check the

and the reinitialisation carried out.

surroundings of the vehicle before and during

With the vehicle stationary, the system

the whole manoeuvre, in particular using the

can be reinitialised via the Driving/

mirrors.

Vehicle touch screen menu.

Driving and manoeuvring

With PEUGEOT i-Connect Advanced -

Radar(s)

PEUGEOT i-Connect

aids - General

The operation of the radar(s), along with

With the vehicle stationary, the system

recommendations

any associated functions, may be affected

can be reinitialised in the

by the accumulation of dirt (e.g. mud, ice),

Settings>Vehicle touch screen application.

Driving and manoeuvring aids cannot, in

in poor weather conditions (e.g. heavy rain,

► Then select Safety > Tire Pressure Setup.

any circumstances, replace the need for

snow), by the masking of the detection zone

► Press YES to confirm.

vigilance on the part of the driver.

with adhesive labels or other objects, or if the

The reinitialisation is confirmed by the display of

The driver must comply with the Highway

bumpers are damaged.

a message and an audible signal.

Code, must remain in control of the vehicle in

If the front or rear bumper is to be repainted,

all circumstances and must be able to retake

contact a PEUGEOT dealer or a qualified

Malfunction

control of it at all times. The driver must adapt

workshop; certain types of paint could

In the event of a malfunction,

the speed to climatic conditions, traffic and

interfere with the operation of the radar(s).

these warning lamps light up on

the state of the road.

Take care not to cover the detection zones

the instrument panel.

It is the driver's responsibility to constantly

on the front and rear bumpers with adhesive

A message appears, accompanied by an audible

monitor traffic conditions, assess the distance

labels or other objects; they may hamper

signal.

and relative speed of other vehicles, and

correct operation of the associated system.

In this case, the tyre under-inflation monitoring

anticipate their manoeuvres before using the

function is no longer performed.

direction indicator and changing lanes.

Have it checked by a PEUGEOT dealer or a

These systems do not make it possible to

qualified workshop.

exceed the laws of physics.

Non-standard or 'space-saver' spare

wheel

Driving aids

Driving aids camera

The use of this type of spare wheel may

You should hold the steering wheel with

This camera and its associated functions

suspend tyre pressure monitoring.

both hands, always use the door and interior

may be impaired or not work if the windscreen

In this case, the malfunction warning lamp

mirrors, always leave your feet close to the

area in front of the camera is dirty, misty,

comes on and disappears once the wheel

pedals and take a break every 2 hours.

110

Driving

frosty, covered with snow, damaged or

noisy vehicles and machinery (e.g. lorries,

To avoid any risk of jamming the pedals:

masked by a sticker.

pneumatic drills), by the accumulation of

- Ensure that the mat is secured correctly.

In humid and cold weather, demist the

snow or dead leaves on the road or in the

- Never fit one mat on top of another.

windscreen regularly.

event of damaged bumpers and mirrors.

Poor visibility (e.g. inadequate street lighting,

When reverse gear is engaged, an audible

Units of speed

heavy rain, thick fog, snowfall), dazzle

signal (long beep) indicates that the sensors

Ensure that the units of speed displayed

(e.g. headlamps of an oncoming vehicle, low

may be dirty.

on the instrument panel (mph or km/h) are

sun, reflections on a damp road, leaving a

A front or rear impact to the vehicle can

those for the country you are driving in.

tunnel, alternating shade and light) can also

upset the sensors’ settings, which is not

If this is not the case, when the vehicle is

impair detection performance.

always detected by the system: distance

stationary, set the display to the required

In the event of a windscreen replacement,

measurements may be distorted.

units of speed so that it complies with what is

contact a PEUGEOT dealer or a qualified

The sensors do not systematically detect

authorised locally.

workshop to recalibrate the camera;

obstacles that are too low (pavements, studs)

In case of doubt, contact a PEUGEOT dealer

otherwise, the operation of the associated

or too thin (trees, posts, wire fences).

or a qualified workshop.

driving aids may be disrupted.

Certain obstacles located in the sensors’ blind

spots may not be detected or may no longer

Other cameras

be detected during the manoeuvre.

Shortcuts for driving aids

The images from the camera(s)

Certain materials (fabrics) absorb sound

displayed on the touch screen or on the

waves: pedestrians may not be detected.

With PEUGEOT i-Connect Advanced -

instrument panel may be distorted by the

PEUGEOT i-Connect

terrain.

Maintenance

The full list of available driving aids can be found

In the presence of areas in shade, or in

Clean the bumpers and door mirrors and

in the Functions tab.

conditions of bright sunlight or inadequate

the field of vision of the cameras regularly.

Driving aids can be accessed directly to quickly

lighting, the image may be darkened and with

When washing your vehicle at high pressure,

activate/deactivate them.

lower contrast.

direct the spray from at least 30 cm away

By default, driving aids are already stored in the

Obstacles may appear further away than they

from the radar, sensors and cameras.

Shortcuts tab (e.g. Stop & Start, Lane keeping

actually are.

assist).

Mats/Pedal trims

Other driving aids can be added or deleted from

Sensors

The use of mats or pedal trims not

this tab.

The operation of the sensors, as well as

approved by PEUGEOT may interfere with

It is configured in the ADAS>Functions

any associated functions, may be disrupted

the operation of the speed limiter or cruise

touch screen application.

by noise pollution such as that emitted by

control.

111

Driving

► Press the button corresponding to the

► Press this button to display the list of

This system displays the maximum speed

driving assistance concerned:

available functions.

authorised locally on the instrument panel, using:

• Full symbol: the function is added to the

► Select the functions to deactivate

- Speed limit signs detected by the camera.

Shortcuts tab.

(e.g. Stop&Start, Lane Keeping Assist, Automatic

- Speed limit information from the on-board

• Empty symbol: the function is deleted from

Braking System (Active Safety Brake)).

navigation system’s mapping.

the Shortcuts tab.

► Press this button to return to the

- Speed limit information from the connected

► Check the modification in the Shortcuts tab.

previous page.

services.

The functions to deactivate are saved in the

- Signs indicating a shared traffic zone detected

system.

by the camera.

Deactivation of these functions

Sign detected

Suggested speed

► Press and hold this button on

(calculated)

the dashboard.

Entry into a shared

Without PEUGEOT

All previously selected functions are deactivated

traffic zone

i-Connect

until the vehicle is next restarted (confirmed by

Example:

Advanced /

an audible signal).

PEUGEOT Connect

► Press this button to access directly to the

Nav

Shortcuts tab.

10 mph or 20 km/h

Road signs recognition

(depending on

Multiple deactivation

For more information, refer to the

the units on the

It is possible to deactivate several driver

General recommendations on the use

instrument panel)

assistance functions simultaneously.

of driving and manoeuvring aids.

With PEUGEOT

This is done in two steps:

i-Connect

- First of all, the selection of all the functions

Advanced /

that you want to deactivate.

PEUGEOT Connect

- Secondly, the simultaneous deactivation of all

Nav

these functions.

Display of the speed

Selection of functions

in force in the country

you are driving in.

► Press this button on the dashboard to

display the ADAS tabs.

- Some supplementary traffic signs detected by

► Select the Functions tab.

the camera.

112

Driving

telematics unit and is immediately deleted

Supplementary

Display of the

Supplementary

Display of the

after processing.

traffic sign detected

speed associated

traffic sign detected

speed associated

Tracking of the vehicle position is not possible

with the

at any time.

supplementary

This is not impacted by the privacy settings of

traffic sign

the connected services.

Speed limit when

If the wiper control

Speed limit for

56 mph (90 km/h)

raining

stalk is in the

vehicles with a

(for example)

On-board navigation mapping should be

Examples:

"intermittent wipe"

gross vehicle

regularly updated in order to receive

or "automatic wipe"

weight or gross

accurate speed limit information from the

position (in order

train weight less

system.

to activate the rain

than 3.5 tonnes

sensor):

The units for the speed limit (mph or

68 mph (110 km/h)

km/h) depend on the country you are

(for example)

Speed limit in case

If the outside

driving in.

Speed limit when

If an approved towing

of snow

temperature is below

This should be taken into account to ensure

towing

device is fixed to the

Example:

3°C:

you observe the speed limit.

vehicle:

19 mph (30 km/h)

For the system to work properly when

56 mph (90 km/h)

(for example)

changing countries, the speed unit of the

(for example)

with a "snowflake"

instrument panel must match that of the

symbol

country you are driving in.

Speed limit

43 mph (70 km/h)

Country selection is only available for audio

applicable over a

(for example)

Speed limit at

19 mph (30 km/h)

systems without on-board navigation.

certain distance

certain times of the

(for example)

Example:

day

with a "clock" symbol

Example:

Automatic sign reading is a driving aid

system and does not always display the

correct speed limits.

The speed limit signs present on the road

always take priority over those displayed by

To get valid speed limit information, the

the system.

vehicle's current position is sent via the

113

Driving

The system is designed to detect signs that

- Tyre repaired using the temporary puncture

conform to the Vienna Convention on road

repair kit.

signs.

- Young drivers.

The system may not display the speed limit if it

Specific speed limits, such as those for

On detecting speed limit information, the system

does not detect a speed limit sign within a preset

heavy goods vehicles, are not displayed.

displays the value, accompanied by an audible

period and in the following situations:

The display of the speed limit on the

signal.

- Road signs that are obstructed, non-standard,

instrument panel is updated when passing

damaged or bent.

a speed limit sign intended for cars (light

Settings

vehicles).

Deactivation/Activation

Information displayed on

For a suggested maximum speed, when the

With PEUGEOT Connect Radio / PEUGEOT

vehicle exceeds it, the speed is displayed and

Connect Nav

the instrument panel

flashes for 3 seconds.

By default, the system is automatically activated

at every engine start.

The settings are changed via the

1. Detected speed limit indication

Driving/Vehicle touch screen menu.

With Touch screen 10" & Bluetooth

2. End of speed limit indication (depending on

Radio & Telephone / PEUGEOT i-Connect

If the vehicle continues to exceed it, the

version)

Advanced - PEUGEOT i-Connect

speed is displayed and flashes for 8 seconds,

accompanied by an audible signal.

By default, the overspeed alert sound is

automatically activated at every engine start.

Operating limits

You can activate/deactivate the

The system does not take account of reduced

overspeed alert and the speed limit

speed limits, especially those imposed in the

change sound.

The system is active but is not detecting speed

following cases:

limit information.

- Atmospheric pollution.

Direct access to the Shortcuts for driving aids.

- Towing.

The system cannot be deactivated.

- Driving with a space-saver type spare wheel

The speed limit change sound is saved

or snow chains fitted.

when the ignition is switched off.

114

Driving

In the event of the overspeed alert sound

(Depending on equipment)

read/obtained from the mapping system in order

deactivation, this warning lamp lights up a

In the event of a malfunction, this warning

to best suit the weather conditions (e.g. on a

few seconds on the instrument panel.

lamp lights up on the instrument panel,

motorway, the suggested speed will be 68 mph

accompanied by the display of a message and

(110 km/h) instead of 81 mph (130 km/h)).

Country selection

an audible signal.

The list of detected road signs can be updated

For more information on the Speed

Have it checked by a PEUGEOT dealer or a

by selecting a specific country.

limiter, Cruise control or Adaptive

qualified workshop.

With Touch screen 10" & Bluetooth Radio &

cruise control, refer to the corresponding

This warning lamp lights up on the

Telephone

sections.

instrument panel with the message

► The desired country can be selected

"Driving Assistance Sensor blind: Clean

via the Driving touch screen menu.

sensor, see User Manual" if the sensor is

Steering-mounted controls

With PEUGEOT i-Connect Advanced -

masked.

PEUGEOT i-Connect

This is a normal behavior, which does not

► In the ADAS touch screen application,

request the support of a qualified workshop.

select Functions>Road Signs>Country

In this case, stop the vehicle and verify if the

setting.

front camera is covered by dirt, mud, sand,

► In the Select Country list, select the desired

snow, ice or anything preventing the sensing.

country.

The system is operational again after the

The current country is displayed under

detection field has been cleaned.

1. Speed limiter/cruise control mode selection

the function name in the settings screen.

2. Memorise the speed setting

The country selection is saved when the

Recommendation

ignition is switched off.

Information displayed on the

instrument panel

Malfunction

This warning lamp lights up on the

instrument panel with the message

In addition to Road signs recognition, the

"Audible Warning System fault: Repair

driver can select the speed displayed as a speed

3. Speed limit indication

needed" if the audible warning system is in

setting for the speed limiter or cruise control

4. Speed memorisation prompt

failure.

using the speed limiter or cruise control 'store'

5. Current speed setting

The system may be disturbed or unavailable.

button.

Have it checked by a PEUGEOT dealer or a

If rain is detected, the system will suggest to

qualified workshop.

the driver a speed setting lower than the speed

115

Driving

Storing the speed setting

For more information, refer to the

With PEUGEOT i-Connect Advanced -

General recommendations on the use

PEUGEOT i-Connect

of driving and manoeuvring aids.

The settings are changed via the ADAS

touch screen application.

Speed limiter

► Switch on the speed limiter/cruise control.

The speed limiter/cruise control information is

For more information, refer to the

displayed.

This additional system recognises these road

General recommendations on the use

Upon detecting a sign suggesting a new speed

signs and displays them on the instrument panel.

of driving and manoeuvring aids.

setting, the system displays the value and

As you approach it, the symbol of the

"MEM" flashes for a few seconds, prompting you

corresponding sign is displayed on the

This system prevents the vehicle from

to save it as a new speed setting.

instrument panel.

exceeding the speed programmed by the

The selected display mode must be "Driving".

driver (speed setting).

If there is a difference of less than 6 mph

The speed limiter is switched on manually.

(9 km/h) between the speed setting and

The actual road signs always take priority

The minimum speed setting is 19 mph (30 km/h).

the speed displayed by the Road signs

over those displayed by the system.

The speed setting remains in the system

recognition, the "MEM" symbol is not

The signs must comply with the Vienna

memory when the ignition is switched off.

displayed.

Convention on road signs.

Depending on the road conditions, several

speeds may be displayed.

Activation/Deactivation

► Press button 2 once to save the suggested

With Touch screen 10" & Bluetooth Radio

speed value.

& Telephone

A message is displayed, confirming the request.

The settings are changed via the Driving

► Press button 2 again to confirm and save the

touch screen menu.

new speed setting.

The display then reverts to its previous state.

With PEUGEOT Connect Radio / PEUGEOT

Connect Nav

Extended Traffic Sign

The settings are changed via the Driving/

Recognition

Vehicle touch screen menu.

(Depending on version)

116

Driving

Steering-mounted control

Information displayed on

Adjusting the limit speed

the instrument panel

setting

You do not have to switch the speed limiter on in

order to set the speed.

To modify the limit speed setting based on the

vehicle’s current speed:

► For steps of +/- 1 mph (1 km/h), briefly

press 2-SET- or 3-SET+ repeatedly.

► For steps of +/- 5 mph (5 km/h), press and

hold 2-SET- or 3-SET+.

6. Speed limiter on/pause status indication

To modify the speed limit setting based on the

7. Speed limiter mode selection indication

speed suggested by the Road signs recognition

8. Speed setting value

function displayed on the instrument panel:

9. Speed suggested by the Road signs

► Press 5-MEM once; a message is displayed,

recognition function (depending on version)

confirming the memorisation request.

► Press 5-MEM again to save the suggested

1. ON (LIMIT position)/OFF

speed.

2. Reduce the speed setting

Switching on/Pausing

The new speed setting value is displayed on the

3. Increase the speed setting

► Turn thumbwheel 1 to the "LIMIT" position

instrument panel.

4. Pause/resume speed limiter with the speed

to select speed limiter mode; the function is

setting previously stored

paused.

Temporarily exceeding the

5. Use the speed suggested by the Road signs

► If the speed limit setting is suitable (most

recognition function (MEM display)

recent speed setting programmed in the system),

speed setting

press button 4-II to switch the speed limiter on.

► Fully depress the accelerator pedal.

For more information on the Road signs

► Pressing 4-II again temporarily pauses the

The speed limiter is temporarily deactivated and

recognition, refer to the corresponding section.

function (pause).

the displayed speed setting flashes.

► Release the accelerator pedal to return to

When the speed setting remains below

below the speed setting.

the vehicle's speed for a prolonged

When exceeding the speed is not due to the

period of time, an audible warning is emitted.

driver's action (e.g. in case of a steep slope), an

audible signal is triggered immediately.

117

Driving

On a steep descent or in the event of

to drive at a steady speed and maintain an

- In poor weather conditions.

sharp acceleration, the speed limiter will

adequate safety distance.

- In the event of restricted visibility for the

not be able to prevent the vehicle from

Remain vigilant while cruise control is

driver.

exceeding the speed setting.

activated. If you press and hold one of the

- Driving on a speed circuit.

If necessary, apply the brakes to control your

speed setting modification buttons, your

- Driving on a rolling road.

vehicle’s speed.

vehicle may change speed very abruptly.

- When using a ‘space-saver’ type spare

When descending a steep hill, the cruise

wheel.

When the vehicle speed returns to the speed

control system cannot prevent the vehicle

- When using snow chains or non-slip

setting level, the speed limiter operates again:

from exceeding the set speed. Brake if

covers.

the speed setting display becomes fixed again.

necessary to control the vehicle speed.

On steep climbs or when towing, the set

Switching off

speed may not be reached or maintained.

Cruise control

► Turn the thumbwheel 1 to the "OFF" position:

speed limiter information is no longer displayed.

Exceeding the programmed speed

For more information, refer to the

setting

General recommendations on the use

Malfunction

You can temporarily exceed the speed

of driving and manoeuvring aids and the

In the event of a malfunction, dashes are

setting by pressing the accelerator pedal (the

Specific recommendations on cruise

displayed flashing and then fixed instead of the

programmed speed flashes).

control.

speed setting.

To return to the speed setting, release the

Have it checked by a PEUGEOT dealer or a

This system automatically maintains the

accelerator pedal (when the set speed is

qualified workshop.

vehicle’s speed at the value programmed

reached again, the displayed speed stops

by the driver (speed setting), without the use of

flashing).

the accelerator pedal.

Cruise control - Specific

Cruise control is switched on manually.

Operating limits

recommendations

It requires a minimum vehicle speed of 25 mph

Never use the system in the following

(40 km/h).

situations:

The cruise control function does not

With a manual gearbox, third gear or higher must

- In an urban area with the risk of

guarantee compliance with the maximum

be engaged.

pedestrians crossing the road.

authorised speed and the safety distance

With an automatic gearbox, mode D or second

- In heavy traffic (except versions with the

between vehicles, the driver remains

gear or higher in mode M must be engaged.

Stop & Go function).

responsible for their driving.

With a drive selector, mode D or B must be

- On winding or steep roads.

In the interest of public safety, only use cruise

engaged.

- On slippery or flooded roads.

control if the traffic conditions enable vehicles

118

Driving

Cruise control remains active after

Information displayed on

Cruise control can also be paused

changing gear, regardless of the gearbox

temporarily:

the instrument panel

type, on engines fitted with the Stop & Start

- by pressing the brake pedal.

function.

- automatically, if the electronic stability

control (ESC) system is triggered.

Switching off the ignition cancels any

speed setting.

Changing the cruise speed

setting

Steering-mounted control

The cruise control must be active.

To change the cruise speed setting, based on

6. Cruise control pause/resume

the vehicle’s current speed:

7. Cruise control mode selection

► For steps of +/- 1 mph (1 km/h), briefly

8. Speed setting value

press 2-SET- or 3-SET+ repeatedly.

9. Speed suggested by the Road signs

► For steps of +/- 5 mph (5 km/h), press and

recognition function (depending on version)

hold 2-SET- or 3-SET+.

Pressing and holding 2-SET- or 3-SET+

Switching on/pausing

results in a rapid change in the speed of

► Turn thumbwheel 1 to the "CRUISE" position

the vehicle.

to select cruise control mode; the function is

1. ON (CRUISE position)/OFF

paused.

2. Activate cruise control at the current speed/

As a precaution, we recommend setting

► Press button 2-SET- or 3-SET+ to activate

decrease speed setting

a cruise speed fairly close to the current

cruise control and save a speed setting when

3. Activate cruise control at the current speed/

speed of your vehicle, to avoid any sudden

the vehicle has reached the desired speed; the

increase speed setting

acceleration or deceleration of the vehicle.

vehicle’s current speed is saved as the speed

4. Pause/resume cruise control with the speed

setting.

To change the cruise speed setting using the

setting previously saved

► Release the accelerator pedal.

speed suggested by the Road signs recognition

5. Use the speed suggested by the Road signs

► Pressing button 4-II temporarily pauses the

function displayed on the instrument panel:

recognition function (MEM display)

function (pause).

► Press 5-MEM once; a message is displayed,

For more information on the Road signs

► Pressing button 4-II again resumes operation

confirming the memorisation request.

recognition, refer to the corresponding section.

of the cruise control (ON).

► Press 5-MEM again to save the suggested

speed.

119

Driving

The new speed setting value is displayed on the

vehicle. Certain road infrastructure elements

With the Stop & Go function, the system

instrument panel.

or vehicles in the surroundings may not be

manages braking until the vehicle comes to a

properly seen or may be poorly interpreted by

complete stop and restarts the vehicle.

Switching off

the camera and radar, resulting in an

The brake lamps come on if the vehicle

► Turn the thumbwheel 1 to the "OFF" position:

unexpected change in direction, a lack of

is slowed down by the system.

the cruise control information disappears from

steering correction and/or inappropriate

It can be dangerous to drive if the brake

the screen.

management of acceleration or braking.

lamps are not in perfect working order.

Malfunction

Primarily designed for driving on main

In the event of a malfunction, dashes are

roads and motorways, this system only

displayed flashing and then fixed instead of the

works with moving vehicles driving in the

speed setting.

same direction as your vehicle.

Have it checked by a PEUGEOT dealer or a

To do this, the system uses a camera fitted at

qualified workshop.

the top of the windscreen and, depending on

Adaptive cruise control

version, a radar fitted in the front bumper.

Drive Assist Plus

For more information, refer to the

Primarily designed for driving on main

Only available on versions with the EAT8

General recommendations on the use

roads and motorways, this system only

automatic gearbox, automatic gearbox (Hybrid)

of driving and manoeuvring aids and the

works with moving vehicles driving in the

and drive selector.

Specific recommendations on cruise

same direction as your vehicle.

This system automatically adjusts the speed

control.

and corrects the trajectory of the vehicle, using

If the driver activates the direction

Adaptive cruise control with Stop&Go function in

This system automatically maintains the vehicle

indicator to overtake a slower vehicle,

conjunction with Lane positioning assist.

speed at a value set by the driver (speed

cruise control may temporarily reduce the

These two functions must be activated and in

setting), while respecting a safety distance from

distance to the target vehicle to facilitate

operation.

the vehicle in front (target vehicle) previously set

overtaking, without exceeding the speed

For more information on Adaptive cruise

by the driver. The system automatically manages

setting.

control and Lane positioning assist, refer to

the acceleration and deceleration of the vehicle.

the corresponding sections.

With a manual gearbox, the system slows the

vehicle down as far as a speed of 19 mph

The system assists the driver by acting

(30 km/h).

on the steering, acceleration and braking

within the physical limits and capacities of the

120

Driving

Steering-mounted controls

Switching on cruise control and setting

► Press 4-II to resume cruise control (green

the speed

display).

With an EAT8 gearbox or a drive selector,

With a manual gearbox, your speed must be

following braking that has brought the vehicle to

between 19 and 112 mph (30 and 180 km/h).

a complete stop, if the traffic conditions do not

With an EAT8 automatic gearbox or a drive

allow the vehicle to begin moving again within

selector, your speed must be between 0 and

3 seconds of stopping, press 4-II or depress the

112 mph (0 and 180 km/h).

accelerator pedal to move off.

► Press 2-SET- or 3-SET+: the current speed

If the driver takes no action after the vehicle

becomes the speed setting (minimum 19 mph

has been stopped, the electric parking brake is

(30 km/h)) and cruise control is immediately

applied automatically after about 5 minutes.

activated (green display).

ON (CRUISE position)/OFF

► Press 3-SET+ to increase or 2-SET- to

Cruise control remains active after

Activation of cruise control at the current

decrease the speed setting (steps of 5 mph

changing gear, regardless of the gearbox

speed/decrease speed setting

(km/h) if held pressed).

type.

Activation of cruise control at the current

speed/increase speed setting

Pressing and holding either 2-SET- or

Pause/resume cruise control with the speed

3-SET+ results in a rapid change in the

When the driver attempts to reactivate

setting previously saved

speed of the vehicle.

cruise control after the function has been

Confirmation of vehicle restart after an

paused, the message "Activation refused,

automatic stop (for versions with Stop & Go

Pausing/resumption of cruise control

unsuitable conditions" is displayed briefly if

function)

reactivation is not possible (safety conditions

► Press 4-II or depress the brake pedal (grey

Use the speed suggested by the Road signs

not met).

display).

recognition function (MEM display)

Cruise control may also have been paused:

Display and adjustment of the distance

Changing the programmed speed setting

- automatically, if the electronic stability control

setting to the vehicle in front

with the Road signs recognition function

(ESC) system is triggered.

- by engaging neutral.

► Press 5-MEM to accept the speed suggested

Use

- when the speed of the vehicle goes below 19

by the system on the instrument panel, then

mph (30 km/h) with a manual gearbox.

press again to confirm.

Activating the system (pause)

- when the speed of the engine goes below

To prevent sudden acceleration or

► With the engine running, turn thumbwheel

1,100 rpm with a manual gearbox.

deceleration of the vehicle, select a

1 downwards to the CRUISE position. Cruise

- by depressing the clutch pedal for more than

speed setting relatively close to the vehicle's

control is ready to operate (grey display).

10 seconds.

current speed.

- by using the electric parking brake.

121

Driving

Changing the inter-vehicle distance

(red)

10. Speed suggested by the Road signs

"Take back control".

► Press 6 to display the distance setting

recognition function

► Take back control of the vehicle

thresholds ("Distant", "Normal", "Close"), then

11. Vehicle held stationary (versions with

immediately: the system cannot manage the

press again to select a threshold.

automatic gearbox or drive selector)

current driving situation.

After a few seconds, the option is accepted and

"Activation refused, conditions

will be memorised when the ignition is switched

unsuitable".

off.

The system refuses to activate cruise control, as

Temporarily exceeding the speed setting

the necessary conditions are not fulfilled.

► Press the accelerator pedal fully. Distance

12. Inter-vehicle distance setting

Stop & Go function

monitoring and cruise control are deactivated

13. Position of the vehicle detected by the

"To pick up again: accelerate or

while acceleration is maintained. "Cruise control

system

press the II button".

on hold" is displayed.

The system has brought the vehicle to a

Deactivating the system

Messages and alerts

complete stop.

► Turn thumbwheel 1 upwards to the OFF

Within 3 seconds, the vehicle gradually and

position.

The actual order in which these

automatically begins moving again.

messages or alerts are displayed may

Beyond 3 seconds, the driver must accelerate or

Information displayed on

vary.

press 4-II to move off again.

the instrument panel

"Cruise paused" or "Cruise control on

While the vehicle is immobilised, the

hold" following brief acceleration by the

following recommendations apply:

driver.

- The driver should not leave the vehicle.

"Active cruise control", no vehicle

- Do not open the boot.

detected.

- Do not drop off or pick up passengers.

"Cruise paused", vehicle detected.

- Do not engage reverse gear.

"Active cruise control", vehicle detected.

When moving off again, watch out for

cyclists, pedestrians and animals, as

(orange)

they may not be detected properly.

7. Vehicle detected by the system (full symbol)

"Take back control".

8. Cruise control active (colour not grey)

► Brake or accelerate, depending on the

9. Speed setting value

context.

122

Driving

Operating limits

- When entering a tunnel or crossing a

bridge.

Cruise control operates by day and night, in dry

weather or moderate rainfall.

Certain situations cannot be managed by the

If any of the following malfunctions

system and require driver intervention.

occurs, do not use the system:

Cases not taken into account by the system:

- When following a narrow vehicle.

- Following an impact on the windscreen

- Pedestrians, cyclists, animals.

Reactivate the system when conditions allow.

close to the camera or on the front bumper

- Stationary vehicles (e.g. traffic jams,

Situations in which the driver is prompted to

(versions with radar).

breakdown).

immediately resume control:

- Brake lamps not working.

- Excessively sharp deceleration by the vehicle

in front of you.

If the vehicle has undergone any of the

following modifications, do not use the

system:

- Carrying long objects on roof bars.

- Towing.

- Vehicles crossing your lane.

- Front end of the vehicle modified (for

- Vehicles driving in the opposite direction.

example by adding long-range headlamps or

Situations where the driver must suspend the

- When a vehicle cuts in sharply between your

painting the front bumper).

system:

vehicle and the one in front.

- Obstructed radar and/or camera.

Some vehicles on the road may be

poorly perceived or interpreted by the

Lane positioning assist

camera and/or the radar (e.g. truck), which

can lead to an incorrect evaluation of

For more information, refer to the

distances and result in inappropriate

General recommendations on the use

acceleration or braking of the vehicle.

of driving and manoeuvring aids.

- Vehicles in a tight bend.

Pay particular attention:

- When approaching a roundabout.

- When motorcycles are present and

when there are vehicles staggered across the

traffic lane.

123

Driving

Activation/Deactivation

The system status is saved when the

ignition is switched off.

Cruise control

The driver must hold the steering wheel properly.

The system identifies the edges of the traffic lane

When cruise control is activated, the symbol is

and steers the vehicle to keep it inside this lane

displayed in green: by small steering actions,

and maintain the lateral position chosen by the

the system directs the vehicle and keeps it in the

driver.

position chosen by the driver, in the traffic lane.

To do this, the system uses a camera placed on

This position is not necessarily the centre of the

► With Adaptive cruise control with Stop&Go

the upper part of the windscreen.

lane.

function activated, press this button.

This system is particularly suited to driving on

The driver can feel movements in the steering

The action is confirmed by:

motorways and main roads.

wheel.

- The indicator lamp in the button lighting up

The driver can change the position of the vehicle

green.

Operating conditions

at any time, by turning the steering wheel, which

- The following symbol being displayed on the

- Adaptive cruise control active.

suspends the function. The driver positions the

instrument panel.

- Traffic lane marked out by lines on both sides.

vehicle where they wish to in the lane. When

The colour of the symbol on the instrument panel

- ESC system operational.

the driver feels that the vehicle’s position is

depends on the operating status of the system:

- ASR system activated.

appropriate, they maintain it until the function

(grey colour)

- No trailer detected.

is reactivated. The system regains control by

One or more operating conditions is not

- No 'space-saver' spare wheel in use.

regulating on the new defined position.

met; the system is paused.

- Vehicle not subject to strong lateral

(green colour)

acceleration.

Pausing/Suspending the

All operating conditions are met; the

- Direction indicators off upon activation of the

system is active.

system

system.

(orange colour)

The driver must act promptly if they

System malfunction.

believe that the traffic conditions or the

If the driver no longer wishes to use the system

state of the road surface require their

for a while, they can deactivate it by pressing the

intervention, by moving the steering wheel to

button again.

temporarily suspend system operation. Any

The indicator lamp in the button goes off and the

intervention on the brake pedal that causes

symbol disappears from the instrument panel.

124

Driving

the Adaptive cruise control to pause will also

the steering wheel, the function must be

In response to action by the driver:

cause the system to pause.

reactivated by pressing the button again.

suspension

- Activation of the direction indicators.

If the system detects that the driver is not

Automatic pause

- Travelling outside the lane limits.

holding the wheel firmly enough, it

- Triggering of the ESC.

- Too tight a grip on the steering wheel or

triggers a series of gradual alerts and then

- Prolonged failure to detect one of the lane

dynamic action on the steering wheel.

deactivates itself if there is no response from

limit markings. In this case, the Lane keeping

- Action on the brake pedal (resulting in a pause

the driver.

assist function can take over, and the system will

until cruise control is reactivated) or accelerator

reactivate itself once the operating conditions are

pedal (suspension for as long as the pedal is

If the function is suspended due to the

met again.

depressed).

prolonged release of the force holding

- Pausing of Adaptive cruise control.

- Deactivation of the ASR.

Driving situations and related alerts

The tables below describe the displays associated with the main driving situations.

The actual order of display of these alerts may be different.

Button indicator lamp

Cruise control

Symbols

Display

Comments

thumbwheel

Off

CRUISE

Cruise paused.

Lane positioning assist not activated.

(grey)

Off

CRUISE

Active cruise control.

Lane positioning assist not activated.

(green)

(grey)

Green

CRUISE

Drive Assist Plus activated.

The system is operating normally

(correction is made at the steering wheel).

(green)

125

Driving

Button indicator lamp

Cruise control

Symbols

Display

Comments

thumbwheel

Green

CRUISE

Drive Assist Plus paused.

(grey)

Green

CRUISE

Drive Assist Plus activated.

All the operating conditions for lane

positioning assist have not been met.

(green)/(grey)

(grey)

Green

OFF or LIMIT

Cruise control deactivated.

All the operating conditions for lane

positioning assist have not been met.

(grey)

Green

CRUISE

Drive Assist Plus suspended.

Cruise control and lane positioning assist

are suspended.

(green)/(grey)

(grey)

Messages

Driving situations

"Activate cruise control to use lane positioning assist"

Activation of lane positioning assist while cruise control is not active.

"Conditions unsuitable - Awaiting activation"

Activation of lane positioning assist while not all conditions are met.

"Keep your hands on the steering wheel"

Prolonged driving without holding the steering wheel, holding it improperly or

without applying any force.

"Hold the steering wheel"

Actual or imminent loss of lane positioning assist.

"Take back control"

Simultaneous loss of cruise control and lane positioning assist.

126

Driving

Operating limits

a trailer is not connected or the trailer is not

This system is particularly useful on

an approved type.

motorways and main roads.

The system may issue an alert when the

- Adverse weather conditions.

vehicle is travelling on a long, straight

- Driving on slippery road surfaces (risk of

road with smooth road surface even if the

aquaplaning, snow, ice).

driver thinks they are holding the steering

- In roadworks or toll booth areas.

wheel correctly.

- Driving on racing circuits.

- Driving on a rolling road.

The system may not operate or may produce

Operating conditions

unsuitable corrections to the steering in the

- Vehicle speed between 43 and 112 mph (70

following situations:

Malfunction

and 180 km/h).

- Poor visibility (insufficient road lighting,

In the event of a malfunction, the

- Road marked with a central dividing line.

snowfall, rain, fog).

Service warning lamp comes on

- Steering wheel held with both hands.

- Dazzle (headlamps of an oncoming vehicle,

and this (orange) symbol appears on the

- Direction indicators off upon activation of the

low sun, reflections on a wet road surface,

instrument panel, accompanied by the display of

system.

leaving a tunnel, alternating light and shade).

a message and an audible signal.

- ESC system activated and operational.

- Windscreen area in front of the camera

Have it checked by a PEUGEOT dealer or a

dirty, misted up, frost-covered, snow-covered,

qualified workshop.

The system helps the driver only if there

damaged or covered by a sticker.

is a risk of the vehicle unintentionally

- Lane markings eroded, partially hidden (snow,

wandering from the lane it is being driven in. It

Lane keeping assist

mud) or multiple (roadworks, surface joints).

does not manage the safe driving distance,

- Travelling in a tight bend.

vehicle speed or braking.

For more information, refer to the

- Winding roads.

The driver must hold the steering wheel with

General recommendations on the use

- Presence of a tarmac joint on the road.

both hands so that they can maintain control

of driving and manoeuvring aids.

Risk of undesirable operation

when the conditions no longer allow the

The system corrects the vehicle's trajectory by

system to intervene (e.g. in the event that

The system should be deactivated in the

alerting the driver as soon as it detects a risk of

the central dividing line marking on the road

following situations:

involuntary lane departure or crossing of a verge

surface disappears).

- Driving with a "space-saver" type spare

or hard shoulder (depending on version).

wheel.

To do this, the system uses a camera, placed on

Operation

- When towing or with a bicycle carrier

the upper part of the windscreen, identifying the

attached to a towing device, particularly when

As soon as the system identifies a risk of

lane markings on the ground and the side of the

involuntarily crossing one of the lane markings

road (depending on version).

127

Driving

detected on the ground or a lane boundary

This warning lamp flashes during

While the direction indicators are activated and

(e.g. grass verge), it performs the trajectory

trajectory correction.

for a few seconds after switching them off, the

correction necessary to restore the vehicle to its

system considers that a change of trajectory is

The driver can prevent the correction by

original lane.

intentional and no correction is triggered during

firmly holding the steering wheel

The driver will notice a turning movement of the

this period.

(e.g. during an emergency manoeuvre).

steering wheel.

The correction is interrupted immediately if

the direction indicators are operated.

Driving situations and related alerts

The table below describes the alerts and messages displayed in different driving situations.

The actual order of display of these alerts may be different.

Function status

Display

Comments

OFF

Function deactivated.

None.

System active, conditions not met:

- Speed below 40 mph (65 km/h).

- No lane marking recognised.

- ESC operation triggered.

- "Sporty" driving.

Automatic deactivation/standby of the function (e.g. detection of a trailer, use of the

"space-saver" type spare wheel supplied with the vehicle, failure).

None.

Lane marking detected.

Speed above 40 mph (65 km/h).

The system corrects the trajectory on the side where the risk of line crossing is detected.

The driver's hands are on the steering wheel.

128

Driving

Function status

Display

Comments

If, while correcting the trajectory, the system determines that the correction will not be

enough and that a solid line will be crossed: the driver is warned that they must provide

additional trajectory adjustment.

If the steering wheel is not held properly, an audible warning sounds, accompanied by

a message, until the trajectory correction is completed or the driver has grasped the

"Hold the steering

steering wheel correctly.

wheel" or "Stay in lane"

The duration of audible warnings will increase if multiple corrections are performed

(depending on version)

in quick succession. The warning will become continuous, persisting until the driver

responds.

The following situations may interfere

- Road in poor condition, unstable or with very

Operating limits

with the operation of the system or

poor grip (risk of aquaplaning, snow, ice).

The system goes into standby automatically in

prevent it from working:

- Adverse weather conditions.

the following cases:

- Insufficient contrast between the road

- Driving on racing circuits.

- ESC deactivated or operation triggered.

surface and the verge or hard shoulder

- Driving on a rolling road.

- Speed below 43 mph (70 km/h) or greater

(e.g. shade).

than 112 mph (180 km/h).

- Lane markings worn, hidden (e.g. snow,

Deactivation/Activation

- Electrical connection to a trailer.

mud) or multiple (e.g. roadworks).

By default, the system is automatically activated

- Use of a "space-saver" spare wheel detected

- Close proximity to the vehicle in front (lane

at every engine start.

(as detection is not immediate, deactivation of

markings may not be detected).

the system is recommended).

With PEUGEOT Connect Radio / PEUGEOT

- Roads that are narrow, winding.

- Dynamic driving style detected, pressure on

Connect Nav

the brake or accelerator pedal.

- Driving over lane markings.

Risk of undesirable operation

- Activation of the direction indicators.

The system should be deactivated in the

- Crossing the inside line on a bend.

following situations:

- Driving on a tight bend.

- When changing a wheel or working near a

- Inactivity by the driver detected during

wheel.

correction.

- Towing or with a bicycle carrier on a towing

device, especially with trailer not plugged in or

not approved.

129

Driving

► Press this button to deactivate/reactivate the

Have it checked by a PEUGEOT dealer or a

symbol in the mirror does not necessarily

system at any time.

qualified workshop.

mean that the function is present on the

The indicator lamp comes on when the function

(Depending on equipment)

vehicle.

is activated.

This warning lamp lights up on the

This system warns the driver of a potential

The state of the system is stored when the

instrument panel with the message "Driving

danger posed by the presence of another vehicle

ignition is switched off.

Assistance Sensor blind: Clean sensor, see

(car, lorry, motorcycle) in the vehicle's blind

User Manual" if the sensor is masked.

With Touch screen 10" & Bluetooth Radio

spots (areas hidden from the driver's field of

This is a normal behavior, which does not

& Telephone

vision) using sensors located on the sides of the

request the support of a qualified workshop.

It is configured via the Driving touch

bumpers.

In this case, stop the vehicle and verify if the

screen menu.

front camera is covered by dirt, mud, sand,

With PEUGEOT i-Connect Advanced

snow, ice or anything preventing the sensing.

It is configured in the ADAS touch screen

The system is operational again after the

application or via the Shortcuts for

detection field has been cleaned.

driving aids.

Deactivation is confirmed by the

Blind spot monitoring

illumination of this indicator lamp on the

instrument panel.

A warning lamp appears in the door mirror on the

For more information, refer to the

General recommendations on the use

side in question:

Malfunction

- fixed, immediately, when being overtaken.

of driving and manoeuvring aids.

This warning lamp lights up on the

- flashing, after a delay of about one second,

instrument panel with the message

when overtaking a vehicle slowly, and when the

"Audible Warning System fault: Repair

direction indicator is used.

needed" if the audible warning system is in

failure.

Activation/Deactivation

The system may be disturbed or unavailable.

With Touch screen 10" & Bluetooth Radio

Have it checked by a PEUGEOT dealer or a

& Telephone

qualified workshop.

The settings are changed via the Driving

In the event of a malfunction,

touch screen menu.

these warning lamps light up on

the instrument panel, accompanied by the

display of a message and an audible signal.

Depending on the country of sale, the

printing of the Blind spot monitoring

130

Driving

With PEUGEOT Connect Radio / PEUGEOT

- You are driving on a straight or slightly curved

Connect Nav

road.

- Your vehicle is not pulling a trailer, a caravan,

The settings are changed via the

etc.

Driving/Vehicle touch screen menu.

With PEUGEOT i-Connect Advanced -

Operating limits

PEUGEOT i-Connect

The settings are changed via the ADAS

touch screen application.

When starting the vehicle, the warning lamp

comes on in each mirror to indicate that the

system is activated.

The status of the system is memorised when the

ignition is switched off.

No alert is triggered in the following conditions:

The system is automatically deactivated

- presence of stationary objects (e.g. parked

when towing with a towing device

vehicles, safety rails, lampposts, signs).

approved by PEUGEOT.

- vehicles travelling in the opposite direction.

- on winding roads or in case of sharp turns.

Operating conditions

- when overtaking or being overtaken by a

- All vehicles are moving in the same direction

very long vehicle (e.g. truck, bus), which is both

and in adjacent lanes.

detected in a blind spot from behind and present

- The speed of your vehicle must be between 7

in the driver's field of vision from the front.

and 87 mph (12 and 140 km/h).

- quick overtaking manoeuvre.

- When overtaking a vehicle, the speed

- very heavy traffic: vehicles detected in front

difference is less than 6 mph (10 km/h).

and behind are confused with a lorry or a

- When overtaken by a vehicle, the speed

stationary object.

difference is less than 16 mph (25 km/h).

- Traffic is flowing normally.

Malfunction

- Overtaking a vehicle over a certain period of

If the event of a malfunction, this warning

time and the vehicle being overtaken remains in

lamp lights up on the instrument panel,

the blind spot.

accompanied by the display of a message.

131

Driving

Have it checked by a PEUGEOT dealer or a

- Active Safety Brake (automatic emergency

qualified workshop.

braking).

The system may be temporarily disturbed

This system:

by certain weather conditions (e.g. rain,

- warns the driver that their vehicle is at risk of

hail).

collision with the preceding vehicle, a pedestrian

In particular, driving on a wet road or going

or a cyclist.

from a dry to a wet area can cause false

- reduces the vehicle's speed to avoid a

alerts (e.g. presence of a cloud of water

collision or to limit its severity.

droplets in the blind spot interpreted as a

vehicle).

Below a speed of 19 mph (30 km/h),

In bad or wintry weather, ensure that the

automatic emergency braking may slow

sensors are not covered by mud, ice or snow.

down the vehicle to a complete stop.

Take care not to cover the warning zone in

The vehicle has a multifunction camera located

Otherwise, for versions with camera only, the

the door mirrors, or the detection zones on

at the top of the windscreen and, depending on

speed may be reduced by a maximum of 16

the front and rear bumpers with adhesive

version, a radar located in the front bumper.

mph (25 km/h).

labels or other objects; they may hamper

For versions with camera and radar, the

This system does not replace the need

correct operation of the system.

speed reduction may be extended to 31 mph

for driver vigilance.

(50 km/h), if both sensors are able to detect

This system is designed to assist the driver

the thread.

and improve road safety.

Active Safety Brake with

It is the driver's responsibility to continuously

The system also takes motorcyclists into

monitor traffic conditions in accordance with

Collision Risk Alert and

account.

applicable driving regulations.

Intelligent emergency

It may also react on animals. Animals

braking assistance

(especially animals smaller than 0.5 m)

As soon as the system detects a

and objects on the road are not necessarily

potential collision, it prepares the braking

For more information, refer to the

detected.

circuit. This may cause a slight noise and a

General recommendations on the use

slight sensation of deceleration.

This system includes three functions:

of driving and manoeuvring aids.

- Collision Risk Alert.

- Intelligent emergency braking assistance

Operating conditions and

(iEBA).

limits

Vehicle moving forward without trailer.

132

Driving

Brake system operational.

switch or with the right or left brake lamp is

The selected threshold is memorised when the

ASR system activated.

detected.

ignition is switched off.

Seat belts fastened for all passengers.

Following a severe crash (e.g. with airbag

With Touch screen 10" & Bluetooth Radio

Stabilised speed on roads with no or low

deployment), the system is automatically

& Telephone

curvature.

deactivated.

The threshold is set via the Driving touch

This warning lamp lights up on the

Have it checked by a PEUGEOT dealer or a

screen menu.

instrument panel without any additional

qualified workshop.

► Select one of the three pre-defined

message, to indicate that the automatic braking

thresholds: "Far", "Normal" or "Close".

system is not available.

In case the detection is degraded or

This is a normal behavior indicating that a

With PEUGEOT Connect Radio / PEUGEOT

temporarily unavailable by environment

condition is not fulfilled and which does not

Connect Nav

conditions, then a driver indication is not

request the support of a workshop.

displayed (because a driver action is not

The threshold is set via the Driving/

In any situations with ignition on where automatic

requested).

Vehicle touch screen menu.

braking presents a risk, deactivating the

► Select one of the three pre-defined

system via the vehicle's configuration menu is

thresholds: "Far", "Normal" or "Close".

It can be dangerous to drive if the brake

recommended, for instance:

lamps are not in perfect working order.

With PEUGEOT i-Connect Advanced -

- Towing a trailer (particularly a trailer without its

PEUGEOT i-Connect

own braking system).

The driver must not overload the vehicle

The threshold is set via the ADAS touch

- Carrying long objects on roof bars.

(keep within the GVW limit and load

screen application.

- Driving with snow chains.

height limits for roof bars).

► Select one of the 3 preset thresholds: "Far",

- Using an automatic car wash.

"Medium" or "Near".

- Performing any maintenance (e.g. changing a

wheel, working inside the engine compartment).

Collision Risk Alert

Operation

- Placing the vehicle on a rolling bench in a

This function warns the driver if there is a risk

Depending on the collision risk detected by the

workshop.

of collision with the preceding vehicle, or with a

system and the alert trigger threshold chosen

- Towing the vehicle.

pedestrian or cyclist.

by the driver, different levels of alert may be

- Following a damage of the windscreen close

triggered and displayed on the instrument panel.

to the detection camera.

Modifying the alert trigger threshold

The system takes into account the vehicle

The system is automatically deactivated

The trigger threshold determines the sensitivity

dynamics, the difference speed of the own

when the use of certain types of

with which the function warns of the risk of

vehicle and the object identified for the

"space-saver" spare wheel (smaller diameter)

collision.

collision risk, and the operation of the vehicle

is detected, or if a fault with the brake pedal

133

Driving

(e.g. actions on the pedals, steering wheel) to

This assistance is only provided if the driver

- At reduced speed in an urban environment,

trigger the alert at the most relevant moment.

presses the brake pedal.

when a stationary vehicle, pedestrian or cyclist

(orange)

is detected.

Level 1: visual alert only, warning that the

Active Safety Brake

- The vehicle's speed is between 6 mph and

preceding vehicle is very close.

53 mph (10 km/h and 85 km/h) (versions with

The message "Vehicle close" is displayed.

camera only) or 87 mph (140 km/h) (versions

(red)

with camera and radar) when a moving vehicle

Level 2: visual and audible alert, warning

is detected.

that a collision is imminent.

This warning lamp flashes (for

The message "Brake!" is displayed.

approximately 10 seconds) as soon as

the function applies the vehicle’s brakes.

While approaching a vehicle too quickly,

During the flashing time, the function is not

the level 2 alert may be displayed

available.

directly.

With an automatic gearbox or drive selector, in

Important: the level 1 alert depends on the

the event of automatic emergency braking, keep

trigger threshold selected. It reacts only on

the brake pedal depressed, also after a complete

moving vehicles. It is disabled automatically

stop is reached, to prevent the vehicle from

at lower speed.

rolling away.

With a manual gearbox, in the event of automatic

It is possible that collision warnings are

emergency braking bringing the vehicle to a

not given, are given too late or seem

complete stop, the engine may stall.

This function, also called "automatic emergency

unjustified.

braking", intervenes after the acoustic alert if the

The driver can override the automatic

The driver must always stay in control of the

driver does not operate the brake pedal quickly

emergency braking at any time by

vehicle and be prepared to react at any time

enough.

strongly turning the steering wheel (evasive

to avoid an accident.

The system aims at reducing the speed of

manoeuver) and/or by firmly pressing the

impact or avoiding a collision if the driver fails to

accelerator pedal.

Intelligent emergency

react.

braking assistance (iEBA)

Operation

This function increases vehicle deceleration

The system operates subject to the following

if the driver does not brake enough to avoid a

conditions:

collision.

134

Driving

The brake pedal may feel hard and

Malfunction

dealer or a qualified workshop to have the

vibrate slightly while the function is

system checked.

This warning lamp lights up on the

operating.

These warning lamps light up on

instrument panel with the message

If the vehicle comes to a complete stop,

the instrument panel and/or in the

"Audible Warning System fault: Repair

automatic braking is maintained for 1 to

warning lamp display for seat belts and front

needed" if the audible warning system is in

2 seconds.

passenger airbag to indicate that the driver's

failure.

and/or front passenger's seat belt is not fastened

The system may be disturbed or unavailable.

(depending on version). The automatic braking

Deactivation/Activation

Have it checked by a PEUGEOT dealer or a

system is deactivated until the seat belts are

qualified workshop.

By default, the system is automatically activated

fastened.

(Depending on equipment)

at every engine start.

This warning lamp lights up on the

With Touch screen 10" & Bluetooth Radio

instrument panel with the message "Driving

Distraction detection

& Telephone

Assistance Sensor blind: Clean sensor, see

The settings are changed via the Driving

User Manual" if the sensor is masked.

For more information, refer to the

touch screen menu.

This is a normal behavior, which does not

General recommendations on the use

With PEUGEOT Connect Radio / PEUGEOT

request the support of a qualified workshop.

of driving and manoeuvring aids.

Connect Nav

In this case, stop the vehicle and verify if the

The function comprises the "Driver Attention

front camera or the front radar is covered by dirt,

The settings are changed via the Driving/

Warning" system combined with the "Driver

mud, sand, snow, ice or anything preventing the

Vehicle touch screen menu.

Attention Warning by Camera" system.

sensing.

With PEUGEOT i-Connect Advanced -

The system is operational again after the

These systems are in no way designed

PEUGEOT i-Connect

detection field has been cleaned.

to keep the driver awake or to prevent

The settings are changed via the ADAS

In the event of a malfunction, this warning

the driver from falling asleep at the wheel.

touch screen application.

lamp lights up on the instrument panel,

It is the driver’s responsibility to stop if feeling

Deactivation of the system is signalled by

accompanied by the display of a message and

tired.

the illumination of this warning lamp,

an audible signal.

Take a break if you are feeling tired or at least

accompanied by the display of a message.

Have it checked by a PEUGEOT dealer or a

every 2 hours.

qualified workshop.

The system cannot be deactivated above

If these warning lamps come on

10 km/h (depending on equipment).

Driver Attention Warning

after the engine has been switched

off and then restarted, contact a PEUGEOT

The system triggers an alert when it

detects that the driver has not taken a

135

Driving

break after two hours of driving at a speed above

Driver Attention Warning by

After three first-level alerts, the system triggers

43 mph (70 km/h).

a further alert with the message "Driving at

Camera

This alert is issued via the display of a message

risk: Take a break", accompanied by a more

encouraging the driver to take a break,

pronounced audible signal.

accompanied by an audible signal.

In certain driving conditions (poor road

If the driver does not follow this advice, the alert

surface or strong winds), the system may

is repeated hourly until the vehicle is stopped.

give alerts independent of the driver's level of

The system resets itself if one of the following

vigilance.

conditions is met:

- With the engine running, the vehicle has been

The following situations may interfere

stationary for more than 15 minutes.

with the operation of the system or

- The ignition has been switched off for a few

prevent it from working:

minutes.

- Lane positioning assist is active.

- The driver's seat belt is unfastened and their

- poor visibility (e.g. inadequate street

door is opened.

The system assesses the driver's level of

lighting, heavy rain, thick fog, snowfall).

alertness, fatigue and distraction by

As soon as the speed of the vehicle

- dazzle (e.g. headlamps of an oncoming

identifying trajectory changes in relation to the

drops below 43 mph (70 km/h), the

vehicle, low sun, reflections on a damp road,

lane markings.

system goes into standby.

leaving a tunnel, alternating shade and light).

To do this, the system uses a camera, placed on

Driving time starts being counted again once

- windscreen area located in front of the

the upper part of the windscreen.

the speed reaches above 43 mph (70 km/h).

camera (e.g. dirty, misted, frost-covered,

This system is particularly suited to fast roads

snow-covered, damaged or masked by a

(speed higher than 43 mph (70 km/h)).

sticker).

The system may perform a learning

- lane markings absent, worn, hidden

procedure for up to 30 minutes after the

(e.g. snow, mud, dead leaves) or multiple

start of the monitoring.

(roadworks).

During this period, the driver's individual

- close to the vehicle ahead (lane markings

driving behaviour is analysed and no alert is

not detected).

given.

- roads that are narrow, winding.

At a first alert level, the driver is warned by

the message "Caution!", accompanied by an

audible signal.

136

Driving

Deactivation / Activation

"Driving Assistance Sensor blind: Clean

Rear parking sensors

sensor, see User Manual" if the sensor is

By default, the function is automatically activated

With PEUGEOT Connect Radio / PEUGEOT

masked.

at every engine start.

Connect Nav

This is a normal behavior, which does not

With Touch screen 10" & Bluetooth Radio

request the support of a qualified workshop.

► Engage reverse gear to start the system

& Telephone

In this case, stop the vehicle and verify if the

(confirmed by an audible signal).

The settings are changed via the Driving

front camera is covered by dirt, mud, sand,

The system is switched off when reverse gear is

touch screen menu.

snow, ice or anything preventing the sensing.

disengaged.

With PEUGEOT Connect Radio / PEUGEOT

The system is operational again after the

With Touch screen 10" & Bluetooth

Connect Nav

detection field has been cleaned.

Radio & Telephone / PEUGEOT i-Connect

Advanced

The settings are changed via the Driving/

Vehicle touch screen menu.

Parking sensors

System startup is available under the following

conditions:

With PEUGEOT i-Connect Advanced -

For more information, refer to the

- when reverse gear is engaged.

PEUGEOT i-Connect

General recommendations on the use

- when the vehicle is moving backwards

The settings are changed via the ADAS

of driving and manoeuvring aids.

(e.g. downhill, in neutral).

touch screen application.

It is indicated by an audible confirmation signal

and a display indication.

Direct access to the Shortcuts for driving aids.

(Depending on equipment)

If an obstacle is detected as soon as the

Deactivation is confirmed by the

reverse gear is engaged, an audible

illumination of this indicator lamp on the

detection signal is given directly instead of the

instrument panel.

audible confirmation signal.

If no audible signal is given, the display

Malfunction

This system detects and signals the proximity of

indication is not shown or a warning message

In the event of a malfunction, this warning

obstacles (e.g. pedestrian, vehicle, tree, barrier)

appears, the system has a failure.

lamp lights up on the instrument panel,

using sensors located in the bumper.

accompanied by the display of a message and

an audible signal.

Have it checked by a PEUGEOT dealer or a

qualified workshop.

This warning lamp lights up on the

instrument panel with the message

137

Driving

Audible assistance

Depending on version, the audible signal is

With Touch screen 10" & Bluetooth Radio &

automatically suspended when the vehicle is

Telephone / PEUGEOT i-Connect Advanced

stationary for a few seconds.

Closing the system display window

Depending on version, the audible signal is

Pressing this button closes the

automatically restored when the vehicle is

system display window.

moving again or if the obstacle approaches the

vehicle.

This warning lamp flashes during obstacle

The system signals the presence of obstacles

detection on the instrument panel.

Adjusting the audible detection signal

which are both within the sensors’ detection zone

Depending on version,

Muting the audible assistance /

and in the vehicle path defined by the direction of

pressing one of these

Closing the visual assistance

the steering wheel.

buttons opens the window for adjusting the

If the audible detection signal is muted or

volume of the audible signal.

the system display window is closed by the

Depending on version, pressing this

driver during the obstacle detection, only

button mutes/unmutes the audible

the warning lamp continues to flash on the

signal.

instrument panel.

Visual assistance

Front parking sensors

Depending on version, in the example shown,

Supplementing the rear parking sensors, the

only the obstacles present in the shaded area

front parking sensors are triggered when an

will be signalled by the audible assistance.

obstacle is detected in front and the speed of the

The proximity information is given by an

vehicle is below 6 mph (10 km/h).

intermittent audible signal, the frequency of

Front parking sensor operation is suspended if

which increases as the vehicle approaches the

the vehicle stops for more than three seconds in

obstacle.

forward gear, if an obstacle is no longer detected

When the distance between the vehicle and

or the vehicle speed exceeds 6 mph (10 km/h).

This supplements the audible signal by

the obstacle becomes less than about thirty

displaying bars on the screen whose location

The sound emitted by the speaker (front

centimetres, the audible signal becomes

represents the distance between the obstacle

or rear) locates the obstacle relative to

continuous.

and the vehicle (white: more distant, orange:

the vehicle, in front or behind it.

The sound emitted by the speaker (right or

close, red: very close).

left) indicates the side on which the obstacle is

When the obstacle is very close, the "Danger"

located.

symbol is displayed on the screen.

138

Driving

Side parking sensors

With Touch screen 10" & Bluetooth Radio

& Telephone

By default, the audible signal is automatically

activated at each time the reverse gear is

engaged.

The system cannot be deactivated.

The rear parking sensors are deactivated

You can start the system manually and

automatically if a trailer or bicycle carrier

Using four additional sensors located on the

activate/deactivate the audible signal in

is connected to a towing device installed in

sides of the bumpers, the system records the

the Driving touch screen menu.

accordance with the Manufacturer's

position of obstacles during the manoeuvre and

recommendations.

With PEUGEOT Connect Radio / PEUGEOT

indicates them when they are located alongside

In this case, the outline of a trailer is displayed

Connect Nav

the vehicle.

at the rear of the image of the vehicle.

The settings are changed via

Only fixed obstacles are indicated

the Driving/Vehicle touch screen

correctly. Moving obstacles detected at

When starting the vehicle, the graphic

menu.

the beginning of the manoeuvre may be

and audible aids are only available after

The status of the function is saved when the

indicated mistakenly, while moving obstacles

the touch screen has started up.

ignition is switched off.

that appear alongside the vehicle but were

With PEUGEOT i-Connect Advanced -

not previously recorded will not be indicated.

PEUGEOT i-Connect

Operating limits

By default, the audible signal is automatically

If the boot is heavily loaded, the vehicle may tilt,

Objects memorised during the

activated at each time the reverse gear is

affecting distance measurements.

manoeuvre will no longer be stored after

engaged.

Depending on version, in case of a gearbox

switching off the ignition.

failure, the system is not active when the reverse

The system cannot be deactivated.

gear is engaged.

Deactivation/Activation

Malfunction

(Depending on country of sale)

You can start the system manually and

activate/deactivate the audible signal in

With PEUGEOT Connect Radio / PEUGEOT

the ADAS touch screen application.

Connect Nav

In the event of a malfunction when

changing into reverse gear, one of

139

Driving

these warning lamps lights up on the instrument

The system is operational again after the

The screen is divided into 3 parts with a side

panel, accompanied by the display of a message

detection field has been cleaned.

menu, a contextual view and a view from above

and an audible signal (short beep).

the vehicle in its close surroundings.

Have it checked by a PEUGEOT dealer or a

The parking sensors supplement the information

Visiopark 1 - Visiopark 2

qualified workshop.

in the view from above the vehicle.

Different contextual views are available:

With Touch screen 10" & Bluetooth

With PEUGEOT i-Connect

- Automatic zoom view.

Radio & Telephone / PEUGEOT i-Connect

- Standard view.

Advanced

Advanced - PEUGEOT

- Panoramic view.

i-Connect

In case of display or speakers

Depending on the context, the system chooses

malfunction, the system may be

the best view to display (standard or automatic

disturbed or unavailable.

Visiopark 1

zoom).

The view type can be changed at any time

For more information, refer to the

during the manoeuvre.

In the event of vehicle malfunction, the

General recommendations on the use

The system status is not saved when the ignition

system may be deactivated.

of driving and manoeuvring aids.

is switched off.

In the event of a malfunction, this warning

When reverse gear is engaged, with the engine

lamp lights up on the instrument panel,

running, this system displays views of the

Operating principle

accompanied by the display of a message and

vehicle's close surroundings on the touch screen

an audible signal (short beep).

using a camera located at the rear of the vehicle.

Have it checked by a PEUGEOT dealer or a

qualified workshop.

This warning lamp lights up on the

instrument panel with the message

"Parking Assistance Sensor blind: Clean

sensor, see User Manual" if the sensor is

masked.

This is a normal behavior, which does not

Using the camera, the vehicle's close

request the support of a qualified workshop.

surroundings are recorded during low speed

In this case, stop the vehicle and verify if the

manoeuvres.

front and/or rear sensors are covered by dirt,

An image from above the vehicle in its close

mud, sand, snow, ice or anything preventing the

surroundings is created in real time (on the side

sensing.

of the screen), as the vehicle progresses.

140

Driving

This view makes it easier to align the vehicle

Automatic zoom view

Standard view

when parking and to perceive nearby obstacles.

It is automatically deleted if the vehicle remains

stationary for too long.

An additional jet is fitted above the number plate

to clean the reversing camera (depending on

version).

► The washing of the reversing camera is

triggered by operating the rear screenwash.

The rear camera records the vehicle's

The area behind the vehicle is displayed on the

surroundings during the manoeuvre in order to

screen.

Settings

create a view from above the rear of the vehicle

The blue lines 1 represent the width of your

In the side menu:

in its close surroundings, allowing the vehicle to

vehicle, with the mirrors unfolded; their direction

This window allows to carry out the

be manoeuvred around nearby obstacles.

changes according to the position of the steering

following operations:

Using the sensors located on the rear bumper,

wheel.

- adjust the volume of the audible signal.

the automatic zoom view is displayed when

The red line 2 represents a distance of 30 cm

- trig the camera washing (depending on

approaching an obstacle at the red line (less

from the rear bumper; the two blue lines 3 and 4

equipment).

than 30 cm) during the manoeuvre.

represent 1 m and 2 m, respectively.

This button allows to mute/unmute the

This view is only available automatically.

This view is available automatically or by

audible signal.

selection in the side menu.

Obstacles may appear further away than

Activation/Deactivation

they actually are.

Panoramic view

It is important to monitor the sides of the

To activate the camera, engage reverse gear.

vehicle during the manoeuvre, using the

The system is deactivated:

mirrors.

- when changing out of reverse gear.

Parking sensors also provide additional

- by pressing the cross in the top left-hand

information about the area around the vehicle.

corner of the touch screen.

The panoramic view allows you to leave, in

reverse, a parking space by anticipating the

arrival of vehicles, pedestrians or cyclists.

This view is not recommended for carrying out a

complete manoeuvre.

141

Driving

This view is only available by selection in the

Different contextual views are available for the

Installing the very cold climate screen

side menu.

rear or for the front:

can alter the image transmitted by the

- Automatic zoom view.

front camera.

Visiopark 2

- Standard view.

- Panoramic view.

For more information, refer to the

Settings

Depending on the context, the system chooses

General recommendations on the use

In the side menu:

the best view to display (standard or automatic

of driving and manoeuvring aids.

This window allows to carry out the

zoom).

following operations:

The view type can be changed at any time

This system allows you to view your vehicle's

- adjust the volume of the audible signal.

during the manoeuvre.

close surroundings on the touch screen using

- adjust the brightness.

The system status is not saved when the ignition

cameras, located at the front and rear of the

- adjust the contrast.

is switched off.

vehicle.

- trig the camera washing (depending on

Operating principle

equipment).

This button allows to mute/unmute the

Reconstructed view

audible signal.

The cameras are activated and a reconstruction

of a view from above your vehicle in its close

Activation/Deactivation

surroundings is displayed on the touch screen.

Automatic

Live view

With the rear camera, engine running and

vehicle stationary, rear vision is displayed

automatically if reverse gear is engaged.

The screen is divided into 4 parts with two side

With the front camera, engine running and speed

menus, a contextual view and a view from above

below 10 mph (16 km/h), rear vision is displayed

the vehicle in its close surroundings.

automatically if a gear is engaged.

The parking sensors supplement the information

Manual

in the view from above the vehicle.

The front and rear views automatically appear in

► In the ADAS touch screen application,

Depending on the view angle chosen in the

the view from above the vehicle.

select Functions>Panoramic Camera

left-hand side menu, the system provides

It is also possible to display any live view by

The system is deactivated:

specific visual assistance in particular driving

selecting the corresponding zone.

- automatically for the rear, when changing out

conditions, such as entering a blind intersection

The front view can be selected in forward gear

of reverse gear.

or manoeuvring in areas with reduced visibility.

up to 10 mph (16 km/h).

142

Driving

- automatically for the front, above

Parking sensors also provide additional

The rear or front panoramic view allows you to

approximately 10 mph (16 km/h).

information about the area around the vehicle.

leave a parking space by anticipating the arrival

- by pressing the cross in the top left-hand

of vehicles, pedestrians or cyclists.

corner of the touch screen.

This view is not recommended for carrying out a

Standard view

complete manoeuvre.

Automatic zoom view

This view is only available by selection in the left-

hand side menu.

Depending on the context, the area behind or in

front of your vehicle is displayed on the screen.

The front or rear camera records the

The blue lines (at the rear)/orange lines (at the

surroundings during the manoeuvre to create

front) 1 represent the width of your vehicle, with

a front or rear view from above the vehicle in

the mirrors unfolded; their direction changes

its close surroundings, making it possible to

according to the position of the steering wheel.

manoeuvre the vehicle around the surrounding

The red line 2 represents a distance of 30 cm

obstacles.

from the rear or front bumper; the two blue lines

Using the sensors located on the front or rear

(at the rear)/orange lines (at the front) 3 and 4

bumper, the automatic zoom view is displayed

represent 1 m and 2 m respectively.

when approaching an obstacle at the red line

This view is available automatically or by

(less than 30 cm) during the manoeuvre.

selection in the left-hand side menu.

This view is only available automatically.

Depending on version, it can be activated/

Panoramic view

deactivated in the ADAS application of the touch

screen.

Obstacles may appear further away than

they actually are.

It is important to monitor the sides of the

vehicle during the manoeuvre, using the

mirrors.

143

Peugeot & TotalEnergies,

a partnership in performance!

For more than 25 years of partnership, TotalEnergies and Peugeot have

pushed the limits of performance in sports competition with historic

victories, in endurance races or in rallies. Today, the two brands continue

their shared motorsport adventure by setting out to conquer the

24 Hours of Le Mans and the FIA World Endurance Championship in the

Hybrid Hypercar category. So many challenges for which Peugeot

exclusively recommends high-tech Quartz lubricants for the protection

of its engines throughout their life. In the same way, TotalEnergies

equips Peugeot vehicles with Quartz lubricants from their first filling in

the factory through to the authorised servicing dealer network to

guarantee them optimal day-to-day operation. Peugeot & TotalEnergies:

official partners in performance!

Keep your engine younger for longer!

Quartz Ineo Xtra First 0W-20 is a very high-performance lubricant

resulting from the joint work of the Peugeot and TotalEnergies R&D

teams. Its innovative technology extends your engine’s life while

achieving significant fuel savings and thus limiting CO₂ emissions. The

product is now available in new packaging* made of 50% recycled

material and which is 100% recyclable.

* 1L & 5L produced in Europe

Practical information

Until sufficient fuel is added, this warning lamp

Compatibility of fuels

appears every time the ignition is switched on,

accompanied by the message and the audible

signal. When driving, this message and audible

Petrol fuels conforming to the EN228 standard

signal are repeated with increasing frequency as

containing up to 5% and 10% ethanol

the fuel level drops towards 0.

respectively.

You must refuel as soon as possible to avoid

running out of fuel.

The only petrol fuel additives authorised

for use are those that meet the B715001

A small arrow by the warning lamp

standard.

indicates which side of the vehicle the

fuel filler flap is located on.

Travelling abroad

Stop & Start / e-Auto mode

► With the vehicle unlocked, press the rear-

Certain fuels could damage your vehicle’s

Never refuel with the engine in STOP

central part of the filler flap to open it.

engine.

mode or in stand-by; you must switch off the

► Take care to select the pump that delivers the

In certain countries, the use of a particular

ignition.

correct fuel type for your vehicle's engine (see a

fuel may be required (specific octane rating,

reminder label on the inside of the filler flap).

specific trade name, etc.) to ensure correct

► Turn the filler cap to the left, remove it and

operation of the engine.

Refuelling

place it on its support (on the filler flap).

For all additional information, consult a dealer.

When refuelling, at least 5 litres must be added

► Insert the filler nozzle and push it in as far as

in order to be registered by the fuel gauge.

possible before starting to refuel (to minimise the

Refuelling

Opening the filler cap may create a noise caused

risk of splashing).

by an inrush of air. This vacuum is normal,

Do not continue after the nozzle’s third cut-

Fuel tank capacity: approximately 40 or 44

caused by the sealing of the fuel system.

out. Doing so may cause malfunctions.

litres (Petrol or Hybrid).

To refuel in complete safety:

► Put the filler cap back in place and turn it to

Reserve level: approximately 5 litres.

► Always switch off the engine.

the right.

► Close the fuel filler flap.

Low fuel level

When the low fuel level is reached, this

If you have put in the wrong fuel for the

warning lamp lights up on the instrument

vehicle, you must have the fuel tank

panel, accompanied by the display of a message

drained and filled with the correct fuel before

and an audible signal. When it first comes on,

starting the engine.

about 5 litres of fuel remain.

145

Practical information

The vehicle is fitted with a catalytic converter,

persons in workshops qualified and approved

- Move away from the vehicle in the event of

which helps to reduce the level of harmful

to carry out this type of work.

incident or accident, the gases emitted being

emissions in the exhaust gases.

- Never damage, modify or remove the

flammable and could cause a fire.

For petrol engines, you must use unleaded

high voltage cables (purple or orange) or

fuel.

disconnect them from the high voltage

The filler neck is narrower, admitting unleaded

network.

Hybrid system

petrol nozzles only.

- Never open, modify or remove the cover of

the traction battery.

Electrical system

- Never work with cutting and forming

Electrified

The electrical circuit of the hybrid system is

tools or heat sources near high voltage

identified by purple cables and its components

vehicles - General

components and cables.

are marked with this symbol:

In case of low level of fluid in the cooling

recommendations

tank, the refilling shall only be performed in a

These recommendations and general information

qualified and trained workshop to verify that

concern electrified vehicles of the type: hybrid,

the leakage is not in the traction battery.

rechargeable hybrid and electric.

Any intervention on the high voltage system

must be carried out by qualified persons in

High voltage system

workshops qualified and approved to carry

out this type of work.

The hybrid powertrain uses a voltage of

High voltage system voltage is

Damage to the vehicle or the traction battery

48 V. This system may be hot both when

dangerous and can cause burns or other

could result in the leakage of toxic gases or

the ignition is on and after switching it off.

injuries or even fatal electric shock.

fluids either immediately or later. PEUGEOT

Comply with the warning messages shown on

Since damage to high voltage components is

recommends that you:

the labels.

not visible, PEUGEOT recommends that you:

- Always inform the fire and emergency

- Never touch the components, damaged

services in the event of an incident, warning

or not, and never let your jewelry or other

High voltage system voltage is

that the vehicle is equipped with a traction

metallic objects come into contact with these

dangerous and can cause burns or other

battery.

components.

injuries or even fatal electric shock.

- Never touch the liquids leaking from the

- Never work on the high voltage cables

Since damage to high voltage components is

traction battery.

(purple or orange) or on any other high

not visible, PEUGEOT recommends that you:

- Do not inhale the gases emitted by the

voltage component marked with the Electric

- Never touch the components, damaged

traction battery which are toxic.

risk label. Any intervention on the high voltage

or not, and never let your jewelry or other

system must be carried out by qualified

146

Practical information

metallic objects come into contact with these

- Move away from the vehicle in the event of

The traction battery is automatically charged to

components.

incident or accident, the gases emitted being

ensure that the charge level is always around

- Never work on the purple high voltage

flammable and could cause a fire.

50% of the maximum level, in order to fully

cables or on any other high voltage

exploit the hybrid functionality and, at the same

component marked with the Electric risk label.

In the event of an accident with an

time, always have some capacity available for

Any intervention on the high voltage system

airbag deployment

the energy recovery operation.

must be carried out by qualified persons in

The traction battery is automatically

It is located under the front left seat.

workshops qualified and approved to carry

disconnected from the electrical circuit to

The traction battery's range varies depending on

out this type of work.

prevent the initiation of short circuits and/or

the type of driving, the route and the ageing of its

- Never damage, modify or remove the

fires.

components.

purple high voltage cables or disconnect them

In the event of an impact to the vehicle’s

The traction battery ageing depends on

from the high voltage network.

underbody

several factors, such as climatic

- Never open, modify or remove the cover of

In these situations, the electrical circuit or the

conditions and the distance travelled.

the traction battery.

traction battery can be seriously damaged.

- Never work with cutting and forming

Stop as soon as it is safe to do so and switch

To preserve the mileage of your vehicle

tools or heat sources near high voltage

off the ignition.

and the durability of your traction battery,

components and cables.

Move away from the vehicle.

PEUGEOT recommends that you:

Any intervention on the high voltage system

Contact a PEUGEOT dealer or a qualified

- Do not expose the vehicle to temperatures

must be carried out by qualified persons in

workshop.

below -30°C and above +60°C for more than

workshops qualified and approved to carry

24 hours.

out this type of work.

High-pressure washing

- Do not use a generator to recharge your

Damage to the vehicle or the traction battery

To avoid damaging the electrical

vehicle's traction battery.

could result in the leakage of toxic gases or

components, it is expressly prohibited to

fluids either immediately or later. PEUGEOT

use high-pressure washing in the engine

recommends that you:

In the event of damage to the traction

compartment or under the body.

- Always inform the fire and emergency

battery

Do not use a pressure greater than 80 bar

services in the event of an incident, warning

It is strictly prohibited to work on the vehicle

when washing the bodywork.

that the vehicle is equipped with a traction

yourself.

battery.

Do not touch liquids coming from the battery,

- Never touch the liquids leaking from the

Traction battery

and in the event of skin contact with these

traction battery.

products, wash abundantly with water and

The 48 V Li-ion (Lithium-ion) traction battery

- Do not inhale the gases emitted by the

contact a doctor as soon as possible.

stores the electrical energy needed to propel the

traction battery which are toxic.

vehicle.

147

Practical information

Contact a PEUGEOT dealer or a qualified

Refer to the 12 V battery/Accessory

workshop to have the system checked.

batteries section for the charging the

batteries using a battery charger procedure.

Traction battery overheating

If the following warning lamps

Disposal of the traction battery

appear, accompanied by the

The traction battery is designed for the life of the

An electric vehicle’s power train can

display of a message and an audible signal, it is

vehicle if the recommendations of PEUGEOT

become hot during use and after

required to:

are followed.

switching off the ignition.

► Stop the vehicle as soon as possible in the

If it becomes necessary to replace the battery,

Comply with the warning messages shown

best conditions of safety.

contact the PEUGEOT dealer for instructions on

on the labels, particularly inside the charging

► Switch off the ignition.

its disposal. Improper disposal carries the risk of

flap.

► Evacuate the vehicle as quickly as possible

severe burns, electric shock, and damage to the

and move to a safe distance.

environment.

High voltage system voltage is

► Call the fire department and/or the

In accordance with regulations, PEUGEOT

dangerous and can cause burns or other

emergency services and tell them that the

ensures a second life or recycling of this

injuries or even fatal electric shock.

vehicle is an electric one.

component in collaboration with qualified

Since damage to high voltage components is

operators.

Danger of death / Risk of serious

not visible, PEUGEOT recommends that you:

injury

- Never touch the components, damaged

A chain reaction can occur up to a traction

Charging system

or not, and never let your jewelry or other

battery fire.

metallic objects come into contact with these

(Electric)

components.

- Never work on the orange high voltage

Vehicle in storage for more than

400 V electrical system

cables or on any other high voltage

1 month

The electric drive system, which operates at a

component marked with the Electric risk label.

Always park the vehicle in a place with

voltage of approximately 400 V, is identified by

Any intervention on the high voltage system

temperatures between -10°C and +30°C

orange cables and its components are marked

must be carried out by qualified persons in

(parking in a place with extreme temperatures

with this symbol:

workshops qualified and approved to carry

can damage the traction battery).

out this type of work.

Carry out the charging procedure for the

- Never damage, modify or remove the

traction battery (48V) via the accessory

orange high voltage cables or disconnect

battery (12V) and the DC/DC converter.

them from the high voltage network.

148

Practical information

- Never open, modify or remove the cover of

High-pressure washing

the traction battery.

To avoid damaging the electrical

- Never work with cutting and forming

components, it is expressly prohibited to

tools or heat sources near high voltage

use high-pressure washing in the engine

components and cables.

compartment or under the body.

In case of low level of fluid in the cooling

Do not use a pressure greater than 80 bar

tank, the refilling shall only be performed in a

when washing the bodywork.

qualified and trained workshop to verify that

the leakage is not in the traction battery.

Never allow water or dust to enter the

Any intervention on the high voltage system

This label is intended solely for use by

connector or charging nozzle - risk of

must be carried out by qualified persons in

firefighters and maintenance services in

electrocution or fire!

workshops qualified and approved to carry

the event of any work on the vehicle.

Never connect / disconnect the charging

out this type of work.

No other person must touch the device shown

nozzle or cable with wet hands - risk of

Damage to the vehicle or the traction battery

on this label.

electrocution!

could result in the leakage of toxic gases or

fluids either immediately or later. PEUGEOT

In the event of an accident or impact

recommends that you:

to the vehicle’s underbody

Traction battery

- Always inform the fire and emergency

In these situations, the electrical circuit or the

This battery stores the energy that powers

services in the event of an incident, warning

traction battery can be seriously damaged.

the electric motor and the thermal comfort

that the vehicle is equipped with a traction

Stop as soon as it is safe to do so and switch

equipment in the passenger compartment. It is

battery.

off the ignition.

discharged during use, and must therefore be

- Never touch the liquids leaking from the

Contact a PEUGEOT dealer or a qualified

regularly recharged. There is no need to wait

traction battery.

workshop.

for the traction battery to fall to its reserve level

- Do not inhale the gases emitted by the

before recharging.

traction battery which are toxic.

When washing

The range of the battery may vary according

- Move away from the vehicle in the event of

Before washing the vehicle, always

to the type of driving, the route, the use of

incident or accident, the gases emitted being

check that the charging flap is closed

thermal comfort equipment and the ageing of its

flammable and could cause a fire.

correctly.

components.

Never wash the vehicle while the battery is

The lifespan of the traction battery

on charge.

depends on multiple factors, such as

climatic conditions, distance travelled and

how often it has been fast-charged.

149

Practical information

To preserve the mileage of your vehicle

Traction battery overheating

Charging connectors and

and the durability of your traction battery,

If the following warning lamps

indicator lamps

PEUGEOT recommends that you:

appear, accompanied by the

- Do not fully charge the battery of your

display of a message and an audible signal, it is

electric vehicle daily (charge the traction

required to:

battery below 80% as often as possible).

► Stop the vehicle as soon as possible in the

- Do not completely discharge the battery.

best conditions of safety.

- Do not store the vehicle for a long period

► Switch off the ignition.

of non-use (more than 12 hours) when the

► Evacuate the vehicle as quickly as possible

traction battery has a low or high charge level.

and move to a safe distance.

Prefer a charge level between 20 and 40%.

► Call the fire department and/or the

- Limit the use of fast charging.

emergency services and tell them that the

- Do not expose the vehicle to temperatures

vehicle is an electric one.

below -30°C and above +60°C for more than

Danger of death / Risk of serious

24 hours.

injury

- Avoid charging the vehicle at negative

A chain reaction can occur up to a traction

temperatures (except if the vehicle ran more

1. Charging connectors

battery fire.

than 20 minutes) or above +30°C.

2. Deferred charging activation button

- Do not use the vehicle's traction battery as

3. Nozzle locking indicator lamp

a generator of energy.

Disposal of the traction battery

Fixed red: nozzle positioned correctly and

- Do not use a generator to recharge your

locked in the connector.

The traction battery is designed for the life of the

vehicle's traction battery.

Flashing red: nozzle incorrectly positioned or

vehicle if the recommendations of PEUGEOT

locking not possible.

are followed.

In the event of damage to the traction

4. Charging indicator lamp

If it becomes necessary to replace the battery,

battery

contact the PEUGEOT dealer for instructions on

It is strictly prohibited to work on the vehicle

its disposal. Improper disposal carries the risk of

yourself.

severe burns, electric shock, and damage to the

Do not touch liquids coming from the battery,

environment.

and in the event of skin contact with these

In accordance with regulations, PEUGEOT

products, wash abundantly with water and

ensures a second life or recycling of this

contact a doctor as soon as possible.

component in collaboration with qualified

Contact a PEUGEOT dealer or a qualified

operators.

workshop to have the system checked.

150

Practical information

In case of impact, even light, against the

State of charging

Meaning

charging flap, do not use it.

indicator lamp

Do not dismantle or modify the charging

Fixed white

Welcome lighting on

connector - risk of electrocution and/or fire!

opening the flap and

Contact a PEUGEOT dealer or a qualified

disconnecting the

workshop.

charging cable.

The meaning of each identification label is as

follows:

Flashing white

Charging

Charging cables, sockets

initialisation.

and chargers

Fixed blue

Deferred charging.

The charging cable supplied with the vehicle

Flashing green

Charging.

(depending on version) is compatible with the

electrical systems in the country of sale. When

Fixed green

Charging complete.

travelling abroad, check the compatibility of local

The charging

electrical systems with the charging cable.

indicator lamp goes

A full range of charging cables is available from

off after about 2

your dealer.

minutes as the

Contact a PEUGEOT dealer or a qualified

vehicle's functions go

workshop for more information and to obtain

into standby.

suitable charging cables.

The indicator lamp

comes on again

Identification labels on charging

when the vehicle is

sockets/connectors

unlocked with the

Identification labels are affixed to the vehicle,

Keyless Entry and

charging cable and charger to inform the user

Start system or when

about which device needs to be used.

a door is opened

to indicate that

the battery is fully

charged.

Fixed red

Malfunction.

151

Practical information

Identification label

Location

Configuration

Power type/Voltage range

Charging connector (vehicle side)

TYPE 2

< 480 Vrms

Charging socket (charger side)

TYPE 2

< 480 Vrms

Charging connector (vehicle side)

COMBO 2 (FF)

50 V - 500 V

Standard charging, mode 2

Specific domestic charging cable - mode

Control unit (mode 2)

2 (AC)

Domestic socket

(standard charging - alternating current (AC))

Mode 2 with a standard socket: 8 A maximum

charging current.

Identification label C on the charging

connector (vehicle side).

POWER

Specific domestic charging cable

Green: electrical connection established;

(mode 2)

charging can begin.

Mode 2 with a Green'Up socket: 16 A

You must not damage the cable.

CHARGE

maximum charging current.

In the event of damage, do not use it and

Flashing green: charging in progress or

To have this type of socket installed, call a

contact a PEUGEOT dealer or a qualified

temperature pre-conditioning activated.

professional installer.

workshop to replace it.

Fixed green: charging complete.

FAULT

152

Practical information

Red: fault; charging not permitted or must be

Incorrect use of this charging cable may

10. Immediately stop charging, by locking and

stopped immediately. Check that everything

result in fire, property damage and serious

then unlocking the vehicle using the remote

is connected correctly and that the electrical

injury or death by electrocution!

control key, if the charging cable or wall

system is not faulty.

Always use a correctly earthed power

socket feel burning hot to the touch.

If the indicator lamp does not go off, contact a

socket, protected by a 30 mA residual

11. This charging cable includes components

PEUGEOT dealer or a qualified workshop.

current device.

liable to cause electrical arcing or sparks.

Upon plugging the charging cable into a

Always use an electrical socket protected

Do not expose to flammable vapours.

domestic socket, all of the indicator lamps come

by a circuit-breaker appropriate for the

12. Only use this charging cable with PEUGEOT

on briefly.

electrical circuit’s current rating.

vehicles.

If no indicator lamps come on, check the

The weight of the control unit must not be

13. Never plug the cable into the wall socket (or

domestic socket's circuit-breaker:

borne by the electrical socket, plug and

unplug it) with wet hands.

- If the circuit-breaker has tripped, contact a

cables.

14. Do not force the connector if it is locked into

professional to check that the electrical system

Never use this charging cable if it is

the vehicle.

is compatible and/or carry out any necessary

defective or in any way damaged.

repairs.

Control unit label - State of indicator

Never attempt to repair or open this

- If the circuit-breaker has not tripped, stop

lamps

charging cable. It contains no repairable

using the charging cable and contact a

parts - replace the charging cable if it is

PEUGEOT dealer or a qualified workshop.

State of the

damaged.

indicator lamp

Control unit label - Recommendations

Never immerse this charging cable in water.

Never use this charging cable with an

Off

Refer to the handbook before use.

extension cable, a multi-plug socket, a

conversion adaptor or on a damaged

electrical socket.

Do not unplug the plug from the wall as a

means of stopping charging.

Flashing

POWER

CHARGE

FAULT

Symbol

Description

Not connected to the power supply or power is not

available from the infrastructure.

153

Practical information

POWER

CHARGE

FAULT

Symbol

Description

The control unit is currently performing a self-test.

(green)

(red)

Connected only to the infrastructure or to the

infrastructure and to the Electric Vehicle (EV) but

no charging in progress.

(green)

Connected to the power supply and to the Electric

Vehicle (EV).

The EV is on charge or in a temperature pre-

(green)

conditioning sequence.

Connected to the power supply and to the Electric

Vehicle (EV).

The EV is waiting for charging or the charging of

(green)

the EV is completed.

Control unit malfunction. No charging allowed.

If an error indicator reappears after a manual reset,

the control unit must be checked by a PEUGEOT

(red)

dealer before the next charge.

The control unit is in diagnostic mode.

(green)

(red)

Manual reset procedure

The control unit can be reset by simultaneously disconnecting the charging connector and the wall socket.

Then, reconnect the wall socket first. For more information, refer to the handbook.

154

Practical information

Accelerated charging, mode 3

Superfast charging, mode 4

Charging cable, mode 3 (AC)

Accelerated charging unit (depending on

Fast public charger

version)

(superfast charging - direct current (DC))

(accelerated charging - single-phase or three-

phase alternating current (AC))

In mode 3 with an accelerated charging unit:

32 A maximum charging current.

Charging cable, mode 4 (DC)

(integrated into the fast public charger)

Identification labels C on the charging

connector (vehicle side) and on the socket

(charger side).

In mode 3 with an accelerated charging unit

(Wallbox): 32 A maximum charging current.

Accelerated charging unit

Do not disassemble or modify the

Identification label K on the charging

charging unit - Risk of electrocution and/or

connector (vehicle side).

fire!

Only use fast public chargers where the cable

Refer to the charging unit manufacturer's user

length does not exceed 30 metres.

manual for the operating instructions.

Charging the traction

battery (Electric)

To recharge, connect the vehicle to a domestic

electricity supply (domestic or accelerated

charging) or to a fast public charger (superfast

charging).

155

Practical information

For a full charge, follow the desired charging

vehicle breaking down and can lead to

Connect a 12 V battery charger to the (+)

procedure without pausing it, until it ends

accidents or serious injuries. ALWAYS make

and (-) terminals of the accessory battery

automatically. Charging can be either immediate

sure the traction battery has a sufficient

about every 3 months in order to recharge the

or deferred (except fast public charger, mode 4).

charge level.

accessory battery and maintain an operating

You can stop domestic or accelerated charging

voltage.

at any time by unlocking the vehicle and

Low charging / Parking

removing the nozzle. For superfast charging,

If the outside temperature is negative,

Precautions

refer to the fast public charger.

it is recommended not to park your vehicle

For more information on the charging displays

Our electric vehicles have been developed in

outside for several hours at a low charging

on the Instrument panel and the Touch screen,

accordance with the recommendations on the

(less than 20%).

refer to the corresponding section.

maximum limits for electromagnetic fields, as

issued by the International Commission on Non-

It is also possible to monitor the charging

Vehicle in storage for more than

Ionizing Radiation Protection (ICNIRP - 1998

progress using the MYPEUGEOT APP

1 month

Guidelines).

application.

In the event of a long period of non-use of

Wearers of pacemakers or equivalent

For more information on Remotely

the vehicle (beyond 4 weeks) without the

devices

operable additional functions, refer to the

possibility of charging when restarting, the

corresponding section.

self-discharge may make it impossible to

Ask your doctor about what precautions

restart if the traction battery charge level

you should take, or ask the manufacturer

is a low or very low, especially at negative

of your implanted electro-medical device about

As a safety measure, the engine will not

ambient temperatures. ALWAYS make sure

whether its operation is guaranteed in an

start if the charging cable is plugged into

that the traction battery has a charge between

environment which complies with the ICNIRP

the connector on the vehicle. A warning is

20% and 40% if you do not plan to use your

recommendations.

displayed on the instrument panel.

vehicle for several weeks.

If in doubt

Do not connect the charging cable.

Cooling the traction battery

Domestic or accelerated charging: do

Always park the vehicle in a place with

The cooling fan in the engine

not remain inside or near the vehicle, or near

temperatures between -10°C and 30°C

compartment comes on during charging to

the charging cable or charging unit, even for

(parking in a place with extreme temperatures

cool the on-board charger and the traction

a short time.

can damage the traction battery).

battery.

Superfast charging: do not use the system

Disconnect the cable from the (+) terminal

yourself and avoid approaching public fast

of the accessory battery in the engine

Low charging / Driving

charging points. Leave the area and ask a

compartment.

Driving when the charge level of the

third party to recharge the vehicle.

traction battery is too low can lead to the

156

Practical information

For domestic or accelerated charging

Do not leave the cable connected to the

Domestic charging, mode 2

domestic power socket - risk of short-circuit

Before charging

or electrocution in the event of contact with or

Depending on the context:

immersion in water!

► Have a professional check that the

electrical system to be used complies with

applicable standards and is compatible with

For superfast charging

the vehicle.

Before charging

► Have a professional electrician install

Check that the fast public charging

a dedicated domestic power socket or

station and its charging cable are compatible

accelerated charging unit (Wallbox)

with the vehicle.

compatible with the vehicle.

If the exterior temperature is below:

You should preferably use the charging cable

- 0°C, charging times may be extended.

available as an accessory.

- -20°C, charging is still possible, but

For more information, contact a PEUGEOT

charging times may be extended even further

► Connect the charging cable from the control

dealer or a qualified workshop.

(the battery has to be heated first).

unit to the domestic socket.

When the connection is made, all of the indicator

During charging

After charging

lamps on the control unit light up, then only the

While charging is in progress, unlocking

Check that the charging flap is closed.

POWER indicator lamp remains on in green.

the vehicle will cause the charging to stop.

► Remove the protective cover from the

If no action is taken on one of the openings

charging nozzle.

(door or boot) or on the charging nozzle, the

Connection

► Insert the nozzle into the charging connector.

vehicle will lock again after 30 seconds and

► Before charging, check that the drive selector

The start of charging is confirmed by the flashing

charging will resume automatically.

is in mode P, otherwise charging is not possible.

green CHARGE indicator lamps in the flap, then

Never work under the bonnet:

► Open the charging flap by pressing the

those on the control unit.

- Some areas remain very hot, even an hour

push-button, and check that there are no foreign

If this is not the case, charging has not

after charging ends - risk of burns!

bodies on the charging connector.

started; restart the procedure, ensuring that all

- The fan may start at any time - risk of cuts

connections are properly established.

or strangulation!

The red indicator lamp in the flap comes on to

indicate that the nozzle is locked.

After charging

When charging is complete and while the

Check that the charging flap is closed.

charging cable is still connected, opening

157

Practical information

the driver's door will display the charge level

► Follow the instructions for use of the fast

- The Energy menu can be accessed via

on the instrument panel for about 20 seconds.

public charger and connect the cable from the

the Applications menu.

fast public charger to the vehicle's connector.

► In the Energy touch screen menu,

Accelerated charging, mode 3

The start of charging is confirmed by the flashing

select the Charge page.

green charging indicator lamp in the flap.

► Set the charging start time.

If this is not the case, charging has not started;

► Press OK.

restart the procedure, ensuring that the

The setting is saved in the system.

connection is properly established.

In the vehicle, with PEUGEOT i-Connect

The red indicator lamp in the flap comes on to

Advanced - PEUGEOT i-Connect

indicate that the nozzle is locked.

► In the Energy touch screen

application, select the Charging tab.

► Follow the accelerated charging unit

Deferred charging

► Set the charging start time.

(Wallbox) user instructions.

The deferred charging start time is set to

► Press OK.

► Remove the protective cover from the

midnight by default.

Activation

charging nozzle.

Depending on equipment, this time can be

► Insert the nozzle into the charging connector.

changed.

Deferred charging is only possible with

The start of charging is confirmed when the

modes 2 and 3.

Settings

charging indicator lamp in the flap flashes green.

On a smartphone or tablet

► After programming the deferred charging,

If this is not the case, charging has not started;

You can programme the deferred

connect your vehicle to the desired charging

restart the procedure, ensuring that the

charging function at any time via the

equipment.

connection has been properly established.

MYPEUGEOT APP application.

The red indicator lamp in the flap comes on to

For more information on Remotely operable

indicate that the nozzle is locked.

additional functions, refer to the corresponding

Superfast charging, mode 4

section.

In the vehicle, with Touch screen 10" &

Bluetooth Radio & Telephone

► Lock the vehicle.

► In the Applications touch screen

► Press this button in the flap within one

menu, select the Differed charging page.

minute to activate the system (confirmed by the

► Set the charging start time.

charging indicator lamp coming on in blue).

► Press OK.

The setting is saved in the system.

► Depending on version, remove the protective

In the vehicle, with PEUGEOT Connect Nav

cover from the lower part of the connector.

158

Practical information

Disconnection

► Disconnect the control unit end of the

axle, and the nose weight approaches the

charging cable from the domestic socket.

maximum permitted without exceeding it.

Air density decreases with altitude, thus reducing

Accelerated charging, mode 3

engine performance. The maximum towable load

The end of charging is indicated by the charging

must be reduced by 10% per 1,000 metres of

control unit and by the fixed lighting of the green

altitude.

indicator lamp in the flap.

► Hang up the nozzle on the charging unit and

Use genuine towing devices and wiring

Before disconnecting the nozzle from the

close the charging flap.

harnesses approved by PEUGEOT. We

charging connector:

recommend having them fitted by a

► If the vehicle is unlocked, lock it and then

Superfast charging, mode 4

PEUGEOT dealer or a qualified workshop.

unlock it.

The end of charging is indicated by the charger

If not fitted by a PEUGEOT dealer, they must

► If the vehicle is locked, unlock it.

and by the fixed lighting of the green indicator

still be fitted in accordance with the vehicle

The red indicator lamp in the flap goes out to

lamp in the flap.

manufacturer's instructions.

confirm that the charging nozzle is unlocked.

► You can also pause charging by

Certain driving or manoeuvring aid functions

► In modes 2 and 3, remove the charging

pressing this button in the flap (in mode 4

are automatically deactivated while an

nozzle within 30 seconds.

only).

approved towing system is in use.

The charging indicator lamp comes on in white.

► Hang up the nozzle on the charger.

For more information about driving with a

With selective door unlocking activated,

► Depending on version, replace the protective

towing device fitted to a trailer and associated

press the unlocking button twice to

cover on the lower section and close the

with the Trailer stability assist, refer to the

disconnect the charging nozzle.

charging flap.

corresponding section.

When the charging nozzle is

When charging is complete, the green

disconnected, a message on the

Comply with the maximum authorised

charging indicator lamp in the flap goes

instrument panel indicates that charging is

towable weight, as indicated on your

out after about 2 minutes.

complete, even if the charging nozzle was

vehicle's registration certificate, on the

disconnected before full charging was

manufacturer's label and in the Technical

Domestic charging, mode 2

completed.

data section of this guide.

The end of charging is confirmed when the green

CHARGE indicator lamp on the control unit and

If using accessories attached to the

the green charging indicator lamp in the flap

Towing device

towing device (e.g. bicycle carriers, tow

come on fixed.

boxes):

Load distribution

► Replace the protective cover on the charging

- Comply with the maximum authorised nose

► Distribute the load in the trailer so that the

nozzle and close the charging flap.

weight.

heaviest items are as close as possible to the

159

Practical information

- Do not transport more than 4 conventional

A. Locked position (the green marks are

bicycles or 2 electric bicycles.

opposite each other); the wheel is in contact

When loading bicycles onto a bicycle carrier

with the towball (no gap).

on a towball, be sure to place the heaviest

B. Unlocked position (red mark opposite

bicycles as close as possible to the vehicle.

the green mark); the wheel is no longer

in contact with the towball (gap of around

Observe the legislation in force in the

5 mm).

country where you are driving.

Affix the enclosed label in a clearly visible

Electric motor

location, close to the carrier or in the

An electric vehicle cannot under any

boot.

Carrier

circumstances be fitted with a towing device.

Protective plug

It is therefore not possible to tow a trailer or

Trailers with LED lamps are not

Connection socket

caravan.

compatible with the wiring harness of this

Safety eye

device.

Detachable towball

Locking/unlocking wheel

Towing device with quickly

Security key lock

To ensure complete safety while driving

Label to note the key references

with a Towing device, refer to the

detachable towball

corresponding section.

Presentation

Before each use

No tools are required to install or remove this

Verify that the towball is correctly fitted,

genuine towing device.

checking the follow points:

- The green mark on the wheel is in line with

the green mark on the towball.

- The wheel is in contact with the towball

(position A).

- The security key lock is closed and the

key removed; the wheel can no longer be

operated.

160

Peugeot 208 (2024 year). Manual in english - page 2