Opel Zafira (2020 year). Manual in english - page 6

 

  Index      Manuals     Opel Zafira (2020 year). Manual in english

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

 

 

 

Content      ..     4      5      6      7     ..

 

 

 

Opel Zafira (2020 year). Manual in english - page 6

 

 

Instruments and controls
115
Autostop
High beam assist
Cruise control
ñ illuminates or flashes green.
B
illuminates green.
v illuminates in the Driver
Information Centre when speed
The high beam assist is activated
Illuminates green
limiter is active. Set speed is indicated
3 131.
in the Driver Information Centre.
Engine is in an Autostop.
Cruise control 3 174.
LED headlights
Flashes green
C
illuminates and a warning
Autostop is temporarily unavailable,
Adaptive cruise control
message is displayed in the Driver
or Autostop mode is invoked
Information Centre.
Q illuminates in the Driver
automatically.
Information Centre when adaptive
Seek the assistance of a workshop.
Stop-start system 3 157.
cruise control is active.
Adaptive cruise control 3 180.
Front fog lights
Exterior light
G illuminates green.
F
illuminates green.
Vehicle detected ahead
The front fog lights are on 3 134.
The exterior lights are on 3 130.
Depending on version,
V
or I is
displayed in the Driver Information
Rear fog light
Centre.
Low beam
H illuminates yellow.
D
illuminates green.
Adaptive cruise control
The rear fog light is on 3 134.
Illuminated when low beam is on.
V
is displayed in the Driver
Information Centre when a vehicle
Rain sensor
High beam
ahead detected in the same lane.
y illuminates green.
A
illuminates blue.
Adaptive cruise control 3 180.
Illuminated when rain sensor position
Illuminates when high beam is on or
on wiper lever is selected.
during headlight flash 3 131.
116
Instruments and controls
Forward collision alert
Depending on the situation, the
Displays
vehicle may automatically brake
I is displayed in the Driver
moderately or hard.
Information Centre when the distance
Driver Information Centre
Forward collision alert 3 187.
to the vehicle ahead gets to small.
The Driver Information Centre is
Front pedestrian protection 3 191.
located in the instrument cluster.
Forward collision alert 3 187.
Active emergency braking 3 188.
Driver Information Centre indicates:
Side blind spot alert
● overall and trip odometer
Speed limiter
T illuminates green.
● digital speed indication
5 illuminates in the Driver
● trip / fuel information menu
The system is active 3 194.
Information Centre when speed
● gear shift indication
limiter is active. Set speed is indicated
Active emergency braking
alongside 5 symbol.
● service information
m
illuminates or flashes yellow.
● vehicle and warning messages
Speed limiter 3 177.
● driver assistance messages
Illuminates
Door open
● pop-up messages
The system has been deactivated or
O illuminates red.
a fault has been detected.
Selecting menus and functions
A door, the tailgate or the tailgate
Additionally, a warning message is
There are several ways to toggle
window is open.
displayed in the Driver Information
between the respective menus and
Centre.
If the vehicle is equipped with hinged
functions:
doors, O is not illuminated when it is
Check the reason of the deactivation
open.
3 188 and in case of a system fault,
seek the assistance of a workshop.
Flashes
The system is actively engaged.
Instruments and controls
117
Baselevel instrument cluster
Press SET 000.
Uplevel instrument cluster
Press button.
PressF.
Midlevel instrument cluster
Press 000.
Vehicle and service messages are
popped up in the Driver Information
Centre, if required. Scroll messages
by using the above mentioned
controls or buttons.
Vehicle messages 3 123.
Move thumb wheel upwards or
downwards on the steering wheel.
118
Instruments and controls
Trip / fuel information menu,
Display of average consumption. The
Digital display of the instantaneous
baselevel display
measurement can be reset at any
speed.
time and starts with a default value.
Stop and Start time counter
To reset, pressF for a few
A time counter adds up the time spent
seconds.
in Autostop during a journey.
Average speed
It resets to zero everytime the ignition
Display of average speed. The
is switched on.
measurement can be reset at any
Compass
time.
Displays the geographic direction of
To reset, pressF for a few
driving.
seconds.
AdBlue range
Information pages:
PressF repeatedly until the
Fuel range
AdBlue menu is shown.
Differerent pages with combined
Range is calculated from current fuel
Indicates an estimate of the AdBlue
information can be selected.
level and current consumption. The
level. A message indicates whether
display shows average values.
the level is sufficient or low.
Select the required page:
After refuelling, the range is updated
AdBlue 3 162.
Trip pages:
automatically after a brief delay.
Trip odometer
When the fuel level is low, a message
The recorded distance since the
appears on the display and the
reset.
control indicator 2 in the fuel gauge
To reset, pressF for a few
illuminates 3 114.
seconds.
Instantaneous fuel consumption
Average fuel consumption
Display of the instantaneous
consumption.
Digital speed
Instruments and controls
119
Trip / fuel information menu,
Display of average consumption. The
Digital display of the instantaneous
midlevel display
measurement can be reset at any
speed.
time and starts with a default value.
Stop and Start time counter
To reset, press SET 000 for a few
A time counter adds up the time spent
seconds.
in Autostop during a journey.
Average speed
It resets to zero everytime the ignition
Display of average speed. The
is switched on.
measurement can be reset at any
Compass
time.
Displays the geographic direction of
To reset, press SET 000 for a few
driving.
seconds.
AdBlue range
Information pages:
Press SET 000 repeatedly until the
Fuel range
AdBlue menu is shown.
Differerent pages with combined
Range is calculated from current fuel
Indicates an estimate of the AdBlue
information can be selected.
level and current consumption. The
level. A message indicates whether
display shows average values.
the level is sufficient or low.
Select the required page:
After refuelling, the range is updated
AdBlue 3 162.
Trip pages:
automatically after a brief delay.
Trip odometer
AdBlue range
When the fuel level is low, a message
The recorded distance since the
appears on the display and the
Press CHECK repeatedly until the
reset.
control indicator 2 in the fuel gauge
AdBlue menu is shown.
To reset, press SET 000 for a few
illuminates 3 114.
AdBlue range
seconds.
Instantaneous fuel consumption
Indicates an estimate of the AdBlue
Average fuel consumption
Display of the instantaneous
level. A message indicates whether
consumption.
the level is sufficient or low.
Digital speed
120
Instruments and controls
Trip / fuel information menu,
To reset, press 000 for a few seconds.
It resets to zero everytime the ignition
uplevel display
Average speed
is switched on.
Compass
Display of average speed. The
measurement can be reset at any
Displays the geographic direction of
time.
driving.
To reset, press 000 for a few seconds.
AdBlue range
Press 000 repeatedly until the AdBlue
Information pages:
menu is shown.
Fuel range
Indicates an estimate of the AdBlue
Range is calculated from current fuel
level. A message indicates whether
level and current consumption. The
the level is sufficient or low.
display shows average values.
AdBlue 3 162.
After refuelling, the range is updated
automatically after a brief delay.
Differerent pages with combined
Info Display
When the fuel level is low, a message
information can be selected.
appears on the display and the
The Info Display is located in the
Select the required page:
control indicator 2 in the fuel gauge
instrument panel near the instrument
illuminates 3 114.
cluster.
Trip pages:
Instantaneous fuel consumption
The Info Display can indicate:
Trip odometer
Display of the instantaneous
● time 3 98
The recorded distance since the
consumption.
● outside temperature 3 97
reset.
Digital speed
● date 3 98
To reset, press 000 for a few seconds.
Digital display of the instantaneous
● Infotainment system, see
Average fuel consumption
speed.
description in the Infotainment
Display of average consumption. The
Stop and Start time counter
Manual
measurement can be reset at any
A time counter adds up the time spent
● indication of rear view camera
time and starts with a default value.
in Autostop during a journey.
3 199
Instruments and controls
121
● indication of panoramic view
Press OK to confirm a selection.
Press : to select system settings
system 3 196
(units, language, time and date).
Press
1
to exit a menu without
● navigation, see description in the
changing a setting.
Press _ to select vehicle settings or
Infotainment Manual
driving functions.
Multimedia / Multimedia Navi
● vehicle and system messages
Touch required menu display icon or
3 123
a function with the finger.
Selecting menus and settings
● settings for vehicle
There are three options to operate the
Confirm a required function or
personalisation 3 124
display:
selection by touching.
● via buttons next to the display
Touch
3
or & on the display to
Radio (Infotainment system)
exit a menu without changing a
● by touching the touchscreen with
setting.
the finger
For further information, see
● via speech recognition
Infotainment Manual.
Button and touch operation
Speech recognition
Description see Infotainment Manual.
Vehicle personalisation 3 124.
Head-up display
The head-up display displays driver
information concerning the
instrument cluster onto a foldable
Press ) to switch on the display.
projection plane on the driver's side.
Press MENU to select main menu
The information appears as an image
page.
projected from a lense in the
Press
fYZ
g
to select a menu
instrument panel onto the projection
page.
Press ) to switch on the display.
122
Instruments and controls
plane directly ahead in driver's view.
when it is dark outside. Be sure to
The image appears focused out
keep the head-up display image
toward the front of the vehicle.
dim and placed low in your field of
view.
Adjust brightness
The head-up display image will
automatically dim and brighten to
compensate for outside lighting.
Brightness can also be adjusted
manually as needed:
Press § to brighten the display.
Switching on
Press $ to dim the display.
Press § to switch on the head-up
The image can temporarily light up
display.
depending on angel and position of
Head-up display shows:
sunlight.
● vehicle speed
Adjust position of head-up display
image
Switching off
● speed limits detected by the
speed sign recognition
Press 7 or 8 to centre the image.
Press $ and hold to turn the head-up
● set speed of speed limiter
It can only be adjusted up and down,
display off.
not side to side.
● set speed of cruise control
Language
● forward collision alert
9 Warning
Preferred language can be set in
● navigation information.
vehicle personalisation menu 3 124.
If the head-up display image is too
bright or too high in your field of
view, it may obstruct your view
Instruments and controls
123
Units
Messages in the Info Display
Vehicle messages
Units can be changed in vehicle
Some important messages may
personalisation menu 3 124.
Messages are indicated in the Driver
appear additionally in the
Information Centre, in some cases
Info Display. Some messages only
Care of head-up display
together with a warning chime.
pop-up for a few seconds.
Clean the screen of the head-up
display with a soft cloth sprayed with
Warning chimes
glass cleaner. Wipe the lens gently,
If several warnings appear at the
then dry it.
same time, only one warning chime
will sound.
System limitations
Head-up display may not operate
When starting the engine or whilst
properly when:
driving
● The lens in the instrument panel
● If a seat belt is not fastened.
is covered by objects or not
● If a door or the tailgate is not fully
clean.
closed.
● Display brightness is too dim or
Press to confirm a message.
● If a certain speed is exceeded
bright.
with parking brake applied.
● Image is not adjusted to the
Vehicle and service messages
● If a programmed speed or speed
proper height.
limit is exceeded.
The vehicle messages are displayed
● The driver wears polarized
as text. Follow the instructions given
● If a warning message appears in
sunglasses.
in the messages.
the Driver Information Centre.
If the head-up image is not correct for
● If the electronic key is not in the
other reasons, contact a workshop.
passenger compartment.
● If the parking assist detects an
object.
124
Instruments and controls
● If an unintended lane change
Select Personalisation-configuration
Vehicle personalisation
occurs.
I OK.
● If the exhaust filter has reached
The vehicle's behaviour can be
Unit settings
the maximum filling level.
personalised by changing the settings
Select Display configuration I OK.
in the Info Display.
When the vehicle is parked and /
Select Choise of units I OK.
Depending on vehicle equipment and
or the driver's door is opened
country-specific regulations some of
Select desired settings I OK.
● With exterior lights on.
the functions described below may
Language settings
not be available.
During an Autostop
Select Display configuration I OK.
Some functions are only displayed or
Select Choise of language I OK.
If the driver's door is opened.
active when the engine is running.
Select desired language I OK.
If any condition for a restart of the
Radio (Infotainment system)
engine is not fulfilled.
Vehicle settings
Select Define vehicle parameters I
OK.
In the corresponding submenus the
following settings can be changed:
● Lamps
Follow me home headlamps:
Activates or deactivates the
function and adjusts its duration.
Welcome lighting: Activates or
deactivates the function and
adjusts its duration.
Press MENU to open the menu page.
Directional headlights: Activates
Use the arrow buttons to operate the
or deactivates the function.
display:
Instruments and controls
125
Comfort
Multimedia
In the corresponding submenus the
following settings can be changed:
Ambient lighting: Adjusts the
brightness of the ambient
● Parking sensors: Activates or
lighting.
deactivates the parking assist
sensors.
Rear wiper in reverse gear:
Activates or deactivates
● Blind spot sensors: Activates or
automatic switching on of the
deactivates side blind spot alert.
rear window wiper when reverse
● Under-inflation initialization:
gear is engaged.
Initialises the tyre under-inflation
Vehicle
detection system.
Unlocking boot only: Activation /
● Diagnostic: Shows alert
deactivation.
messages of the diagnostic
system.
Plip action: Driver / all doors.
Press : to open settings menu.
Security
Memorising of preset speeds
Fatigue Detection system:
Unit settings
This feature enables to define and
Activates or deactivates the
Select System configuration.
memorise up to six speed settings for
driver drowsiness system.
cruise control and speed limiter. By
Change units for Distance and fuel
default, a few speeds are already
Driving assistance
consumption and Temperature.
memorised.
Speed recommendation:
Language settings
● Press _.
Activates or deactivates the
Select Language.
function.
● Select Adjusting speeds.
Change language by touching the
● Select Cruise control or Speed
respective entry.
limiter.
Driving function
● Select the speed setting to be
changed.
Press _.
Select Driving function.
126
Instruments and controls
● Type the new speed value via the
Welcome lighting: Activates or
Multimedia Navi
keypad and confirm with A /
deactivates the function and
OK.
adjusts its duration.
● Confirm with A / OK once more
Directional headlamps: Activates
to exit the menu.
or deactivates the cornering
lights.
Vehicle settings
Comfort
Press _.
Mood lighting: Adjusts the
Select Vehicle settings.
brightness of the ambient
In the corresponding submenus the
lighting.
following settings can be changed:
Safety
Parking
Speed reading/recommendation:
Prevention of door mirror folding:
Activates or deactivates the
Activates or deactivates the
speed limit information by traffic
Press : to open settings menu.
automatic folding of the exterior
sign recognition.
Unit settings
mirrors.
Active safety brake: Activates or
Select System settings in the options
Rear wiper in reverse: Activates
deactivates active emergency
menu.
or deactivates automatic
braking, the alert distance for risk
Change units for Distance and fuel
switching on of the rear window
of collision can be selected.
consumption and Temperature.
wiper when reverse gear is
Mirror adaptation in reverse:
engaged.
Confirm with A / OK.
Adjusts the exterior mirrors if
Headlights
reverse gear is engaged to
Language settings
facilitate pavement visibility.
Guide-me-home lighting:
Select Languages.
Activates or deactivates the
Driver’s attention warning:
Change language by touching the
function and adjusts its duration.
Activates or deactivates the
respective entry.
driver drowsiness system.
Confirm with A / OK.
Instruments and controls
127
Driving functions
● Under-inflation initialization:
● Select the speed setting to be
Press _.
Initialises the tyre under-inflation
changed.
detection system.
Select Driving functions.
● Type the new speed value via the
● Diagnostic: Shows alert
keypad and confirm with A /
In the corresponding submenus the
messages of the diagnostic
OK.
following settings can be changed:
system.
● Confirm with A / OK once more
Automatic headlamp dipping:
to exit the menu.
Activates or deactivates high
Memorising of preset speeds
beam assist.
This feature enables to define and
Vehicle settings
Lane departure warning system:
memorise up to six speed settings for
Press _.
Activates or deactivates lane
cruise control and speed limiter. By
Select Vehicle settings.
departure warning.
default, a few speeds are already
memorised.
In the corresponding submenus the
Stop and start: Activates or
following settings can be changed:
deactivates stop-start system
Press _.
● Parking
Cruise control active: Activates or
Select Adjusting speeds.
deactivates adaptive cruise
Rear wiper in reverse: Activates
Select Cruise control or Speed
control.
or deactivates automatic
limiter.
switching on of the rear window
Parking sensors: Activates or
wiper when reverse gear is
deactivates the parking assist
engaged.
sensors.
Blocking of door mirror folding:
Blind spot sensors: Activates or
Activates or deactivates the
deactivates side blind spot alert.
automatic folding of the exterior
Traction control: Activates or
mirrors.
deactivates Traction Control
● Headlights
system.
Guide-me-home lighting:
Activates or deactivates the
function and adjusts its duration.
128
Instruments and controls
Welcome lighting: Activates or
Driver’s attention warning:
Telematics services
deactivates the function and
Activates or deactivates the
adjusts its duration.
driver drowsiness system.
Opel Connect
Directional headlamps: Activates
Opel Connect is a new way to stay
or deactivates the cornering
connected and secure on the road.
lights.
Features available with
Vehicle access
Opel Connect are:
Hands-free auto locking:
● emergency call function
Activates or deactivates the
function.
● breakdown call function
Comfort
When the vehicle is equipped with
Opel Connect, these features are
Mood lighting: Adjusts the
automatically activated. Terms and
brightness of the ambient
Conditions apply.
lighting.
Opel Connect is operated by the
Safety
buttons in the overhead console.
Traffic Signs Recognition:
Note
Activates or deactivates the
Opel Connect is not available for all
speed limit information by traffic
markets. For further information,
sign recognition.
contact your workshop.
Active safety brake: Activates or
deactivates active emergency
Emergency call function
braking, the alert distance for risk
Vehicles featuring the emergency call
of collision can be selected.
function are equipped with a red
Mirror adaptation in reverse:
SOS button in the overhead console.
Adjusts the exterior mirrors if
The emergency call function will
reverse gear is engaged to
establish a connection to the nearest
facilitate pavement visibility.
public safety answering point (PSAP).
Instruments and controls
129
A minimum set of data including
Status LED
vehicle and location information will
Illuminates green for three seconds
be sent to the PSAP.
when the ignition is switched on: the
system works properly.
Note
Establishing an emergency call may
Illuminates red: fault in the system.
not be possible in areas without
Contact a workshop.
sufficient network availability or due
Flashes red: backup battery needs
to hardware damage during an
replacement.
accident.
Breakdown call function
Automatic crash notification
In case of an accident with airbag
Pressing . for more than two
deployment, an automatic
seconds connects you to a roadside
emergency call is established and an
assistance service provider.
automatic crash notification will be
For information about coverage and
transmitted to the next public safety
scope of services of the roadside
answering point.
assistance, please refer to the
Service and warranty booklet.
Emergency assistance
In case of an emergency you can also
manually place an emergency call by
pressing the red SOS button for more
than two seconds. The LED flashes to
confirm that a connection to the
nearest PSAP is being established.
The LED illuminates steadily as long
as the call is active.
Pressing the SOS button immediately
a second time will terminate the call.
The LED switches off.
130
Lighting
Entry lighting
137
Lighting
Exterior lighting
Exit lighting
137
Vehicle locator lighting
138
Light switch
Peripheral lighting
138
Battery discharge protection
138
Exterior lighting
130
Light switch
130
Automatic light control
131
High beam
131
High beam assist
131
Headlight flash
132
Headlight range adjustment
132
Headlights when driving
abroad
133
Daytime running lights
133
Cornering lights
133
Hazard warning flashers
133
Turn lights
134
Turn light switch:
Front fog lights
134
AUTO : automatic light control
Rear fog light
134
switches automatically
Reversing lights
135
between daytime running
Misted light covers
135
light and headlight
Interior lighting
135
F
: sidelights
Instrument panel illumination
D
: headlight
control
135
Interior lights
135
When switching on the ignition,
Reading lights
136
automatic light control is active.
Sunvisor lights
137
Control indicator
F
3 115.
Lighting features
137
Centre console lighting
137
Lighting
131
Tail lights
Automatic headlight activation
high beam assist remains active and
switches high beam on and off
Tail lights are illuminated together
During poor lighting conditions the
automatically. The latest setting of the
with low / high beam and sidelights.
headlights are switched on.
high beam assist will remain after the
Additionally, headlights are switched
ignition is switched on again.
Automatic light control
on if the windscreen wipers have
This feature automatically activates
been activated for several wipes.
the high beam at night when vehicle
is faster than 25 km/h.
High beam
It switches automatically back to low
beam when:
● A sensor detects the lights of
oncoming or preceding vehicles.
● Driving in urban areas.
● The vehicle is slower than
15 km/h.
● It is foggy or snowy.
● Front or rear fog lights are
switched on.
When the automatic light control
function is switched on and the
If there are no restrictions detected,
engine is running, the system
the system switches back to high
switches between daytime running
beam.
To activate the high beam, pull the
lights and headlights automatically
lever beyond the resistance point.
depending on the external lighting
conditions and information given by
the wiper system.
High beam assist
Daytime running light 3 133.
The camera in the windscreen
detects the lights of oncoming or
preceding vehicles. Once activated,
132
Lighting
Activation
With high beam on, pull the indicator
Headlight range adjustment
lever once to deactivate high beam
assist.
Manual headlight range
adjustment
Headlight flash
Depending on version the high beam
assist can be activated by pressing
B
once or in the vehicle
personalisation 3 124.
To adapt headlight range to the
vehicle load to prevent dazzling: turn
The green control indicator
B
To activate the headlight flash, pull
thumb wheel X to required position.
illuminates continuously when the
lever.
assist is activated, the blue one
C
0 : front seats occupied
Pulling lever deactivates high beam.
illuminates when high beam is on.
1 : up to five people or partial load
2 : all seats occupied or driver and
Control indicator
B
3 115.
intermediate load
Deactivation
3 : driver and permissible max. load
Depending on version the high beam
assist can be deactivated by pressing
B
once or in the vehicle
personalisation 3 124.
Lighting
133
Headlights when driving
Cornering lights
Hazard warning flashers
abroad
When driving in countries where
traffic drives on the opposite side of
the road, the headlights must be
adjusted to avoid dazzling oncoming
drivers.
Contact your dealer or a qualified
Activated at a speed of up to 40 km/h
workshop.
when turning off. Depending on the
steering angle or the activation of the
Daytime running lights
turn lights the front fog light illuminate
the direction of travel.
Daytime running lights increase
visibility of the vehicle during daylight.
This function can be activated or
Operated by pressing ç.
deactivated in the vehicle
They are switched on automatically
personalisation 3 124.
Hazard warning flashers are switched
when the engine is running or by
on automatically in the following
adjusting 0 or AUTO.
situations:
The system switches between
● Braking in an emergency
daytime running lights and low beam
(depending on the force of
automatically, depending on the
deceleration).
lighting conditions.
● In the event of an accident.
They are switched off the first time
you accelerate or if you press ç.
134
Lighting
Turn lights
Front fog lights
Rear fog light
up
: right turn lights
Turn the control wheel once to
Turn the control wheel once to
down : left turn lights
activate or deactivate the front fog
activate or deactivate the rear fog
light.
light.
A resistance point can be felt when
Light switch in position AUTO:
moving the indicator lever.
switching on front fog lights will switch
Constant flashing is activated when
headlights on automatically.
the indicator lever is being moved
beyond the resistance point. It is
deactivated when the steering wheel
is moved in the opposite direction or
indicator lever is manually moved
back to its neutral position.
To activate three flashes, tap the
indicator lever briefly without passing
the resistance point.
135
Lighting
Turn the control wheel twice to
Interior lighting
Interior lights
activate or deactivate the rear fog
During entry and exit of the vehicle,
light.
Instrument panel
the front and rear courtesy lights
Light switch in position AUTO:
illumination control
automatically switch on and then off
switching on rear fog light will switch
after a delay.
headlights on automatically.
Front and rear courtesy light
Reversing lights
The reversing light comes on when
the ignition is on and reverse gear is
selected.
Misted light covers
The inside of the light housing may
mist up briefly in poor, wet and cold
weather conditions, in heavy rain or
after washing. The mist disappears
Brightness can be adjusted when the
quickly by itself. To help, switch on the
exterior lights are on.
headlights.
Depending on version the brightness
Operate rocker switch:
can be set by pressing and holding
;
: automatic switching on
0
or
ß
until the desired
and off
brightness is obtained or in the
press § : on
vehicle personalisation 3 124.
press 2 : off
136
Lighting
Reading lights
Illustration shows rear courtesy light.
One of the load compartment lights
can also be used as a torch.
Load compartment lighting
Operated by pressing z and B in the
Pull the torch out from the top of the
courtesy lights.
The lower load compartment lights
recess.
come on when the load compartment
is opened.

 

 

 

 

 

 

 

Content      ..     4      5      6      7     ..