Nissan Versa Sedan (2015 year). Instruction

phone module when the ignition switch is placed
in the ON position with the connected cellular
phone turned on and carried in the vehicle.

You can register up to 5 different Bluetooth®
cellular phones to the in-vehicle phone module.
However, you can talk on only one cellular phone
at a time.

NISSAN Voice Recognition system supports the
phone commands, so dialing a phone number
using your voice is possible. For more details, see
“NISSAN Voice Recognition System” in this sec-
tion.

Before using the Bluetooth® Hands-Free Phone
System, refer to the following notes.

● Set up the wireless connection between a

cellular phone and the in-vehicle phone
module before using the hands-free phone
system.

● Some Bluetooth® enabled cellular phones

may not be recognized by the in-vehicle
phone

module.

Please

visit

www.nissanusa.com/bluetooth for a recom-
mended phone list and connecting.

● You will not be able to use a hands-free

phone under the following conditions:

– Your vehicle is outside of the cellular ser-

vice area.

– Your vehicle is in an area where it is

difficult to receive cellular signal; such as
in a tunnel, in an underground parking
garage, near a tall building or in a moun-
tainous area.

– Your cellular phone is locked to prevent it

from being dialed.

● When the radio wave condition is not ideal

or ambient sound is too loud, it may be
difficult to hear the other person’s voice dur-
ing a call.

● Immediately after the ignition switch is

placed in the ON position, it may be impos-
sible to receive a call for a short period of
time.

● Do not place the cellular phone in an area

surrounded by metal or far away from the
in-vehicle phone module to prevent tone
quality degradation and wireless connection
disruption.

● While a cellular phone is connected through

the Bluetooth® wireless connection, the
battery power of the cellular phone may dis-
charge quicker than usual. The Bluetooth®
Hands-Free Phone System cannot charge
cellular phones.

● If the hands-free phone system seems to be

malfunctioning, see “Troubleshooting guide”
in

this

section.

You

can

also

visit

www.nissanusa.com/bluetooth for trouble-
shooting help.

● Some cellular phones or other devices may

cause interference or a buzzing noise to
come from the audio system speakers. Stor-
ing the device in a different location may
reduce or eliminate the noise.

● Refer to the cellular phone owner’s manual

regarding the telephone charges, cellular
phone antenna and body, etc.

● The signal strength display on the monitor

will not coincide with the signal strength
display of some cellular phones.

REGULATORY INFORMATION

FCC Regulatory information

– CAUTION: To maintain compliance with

FCC’s RF exposure guidelines, use only the
supplied antenna. Unauthorized antenna,
modification, or attachments could damage
the transmitter and may violate FCC regula-
tions.

– Operation is subject to the following two con-

ditions:

1. This device may not cause interference and

Monitor, climate, audio, phone and voice recognition systems

4-77

2. this device must accept any interference,

including interference that may cause unde-
sired operation of the device.

IC Regulatory information

– Operation is subject to the following two con-

ditions: (1) this device may not cause interfer-
ence, and (2) this device must accept any
interference, including interference that may
cause undesired operation of the device.

– This Class B digital apparatus meets all re-

quirements of the Canadian Interference-
Causing Equipment Regulations.

BLUETOOTH® is a
trademark owned by
Bluetooth SIG, Inc.
and licensed to
Bosch.

VOICE COMMANDS

You can use voice commands to operate various
Bluetooth® Hands-Free Phone System features
using the NISSAN Voice Recognition system. For
more details, see “NISSAN Voice Recognition
System” in this section.

Voice Prompt Interrupt

While using the voice recognition system, the
system voice can be interrupted to allow the user
to speak commands. While the system is speak-
ing, press the

button on the steering

wheel. The system voice will stop and a tone will
be heard. After the tone, speak desired command
(displayed on the touch-screen).

One Shot Call

To use the system faster, you may speak the
second level commands with the main menu
command on the main menu. For example, press
the

button and after the tone say, “Call

Redial”.

CONNECTING PROCEDURE

NOTE:

The connecting procedure must be per-
formed when the vehicle is stationary. If the
vehicle starts moving during the procedure,
the procedure will be cancelled.

1. Press the [

] button on the control

panel.

2. Touch the “Settings” key.

3. Touch the “Phone & Bluetooth” key.

4. Touch the “Connect New Device” key.

LHA2773

4-78

Monitor, climate, audio, phone and voice recognition systems

5. Initiate the connecting process from the

handset. The system will display the mes-
sage: “Is PIN XXXXXX displayed on your
Bluetooth device?”. If the PIN is displayed
on your Bluetooth® device, select “Yes” to
complete the pairing process.

For more information, see the Bluetooth® de-
vice’s Owner’s Manual.

VEHICLE PHONEBOOK

To access the vehicle phonebook:

1. Press the

button on the control panel.

2. Touch the “Phonebook” key.

3. Choose the desired entry from the displayed

list.

4. The number of the entry will be displayed on

the screen. Touch the number to initiate di-
aling.

NOTE:

To scroll quickly through the list, touch the
“A-Z” key in the upper right corner of the
screen. Turn the TUNE/SCROLL knob to
choose a letter or number and then press
ENTER. The list will move to the first entry
that begins with that number or letter.

MAKING A CALL

To make a call, follow the procedure below:

1. Press the

button on the control panel.

The “Phone” screen will appear on the dis-
play.

2. Select one of the following options to make a

call:

● “Phonebook”: Select the name from an entry

stored in the vehicle phonebook.

● “Call Lists”: Select the name from the in-

coming, outgoing or missed.

● “Redial”: Dial the last outgoing call from the

vehicle.

● “

”Input the phone number manually

using a keypad displayed on the screen. For
information on how to use the touch-screen,
see “How to use the touch-screen” in this
section.

RECEIVING A CALL

When a call is placed to the connected phone,
the display will change to phone mode.

To accept the incoming call, either:

● Press the

button on the steering

wheel, or

● Touch the green phone icon on the screen.

To reject the incoming call, either:

● Press the

button on the steering

wheel, or

● Touch the red phone icon on the screen.

DURING A CALL

While a call is active, the following options are
available on the screen:

● “Handset”

Select this option to switch control of the
phone call over to the handset.

● “Mute Mic.”

Select this option to mute the microphone.
Select again to unmute the microphone.

● Red phone (

) icon

Select to end the phone call.

ENDING A CALL

To end a phone call, select the red phone (

)

icon on the screen or press the

button on

the steering wheel.

Monitor, climate, audio, phone and voice recognition systems

4-79

TEXT MESSAGING

WARNING

● Laws in some jurisdictions may restrict

the use of some of the applications and
features, such as social networking and
texting. Check local regulations for any
requirements.

● Laws in some jurisdictions may restrict

the use of “Text-to-Speech”. Check local
regulations before using this feature.

● Use the text messaging feature after

stopping your vehicle in a safe location.
If you have to use the feature while
driving, exercise extreme caution at all
times so full attention may be given to
vehicle operation.

● If you are unable to devote full attention

to vehicle operation while using the text
messaging feature, pull off the road to a
safe location and stop your vehicle.

The system allows for the sending and receiving
of text messages through the vehicle interface.

Sending a text message:

1. Press the

button on the steering

wheel.

2. Say “Phone” after the tone.

3. Say “Send Text” after the tone.

4. The system will provide a list of available

commands in order to determine the recipi-
ent of the text message. Choose from the
following:

● To (a name)
● Enter Number
● Missed Calls
● Incoming Calls
● Outgoing Calls

For more information about these options,
see “Voice commands” in this section.

5. Once a recipient is chosen, the system

prompts for which message to send. Nine
predefined messages are available as well
as three custom messages. To choose one
of the predefined messages, speak one of
the following after the tone:

● “Driving, can’t text”
● “Call me”
● “On my way”
● “Running late”
● “Okay”
● “Yes”

● “No”
● “Where are you?”
● “When?”

To send one of the custom messages, say
“Custom Messages”. If more than one cus-
tom message is stored, the system will
prompt for the number of the desired cus-
tom message. For more information on set-
ting and managing custom text messages,
see “Bluetooth® settings” in this section.

Reading a received text message:

1. Press the

button on the steering

wheel.

2. Say “Phone” after the tone.

3. Say “Read Text” after the tone.

The text message, sender and delivery time are
shown on the screen. Use the tuning switch to
scroll through all text messages if more than one
are available. Press the

button to exit the

text message screen. Press the

button to

access the following options for replying to the
text message:

● Call Back

Speak this command to call the sender of
the text message using the Bluetooth®
Hands-Free Phone System.

4-80

Monitor, climate, audio, phone and voice recognition systems

● Send Text

Speak this command to send a text message
response to the sender of the text message.

● Read Text

Speak this command to read the text mes-
sage again.

● Previous Text

Speak this command to move to the previ-
ous text message (if available).

● Next Text

Speak this command to move to the next text
message (if available).

NOTE:

Text messages are only displayed if the
vehicle speed is less than 5 mph (8 km/h).

BLUETOOTH® SETTINGS

To access the phone settings:

1. Press the [

] button.

2. Touch the “Settings” key.

3. Touch the “Phone & Bluetooth” key.

Menu Item

Result

Phone Settings

See “Phone settings” in this section for more information.

Connect New Device

Touch to connect a new Bluetooth® device to the Bluetooth® Hands-Free Phone System.

Select Connected Device

Touch to choose a Bluetooth® device from a list of those devices connected to the Bluetooth® Hands-Free Phone System.

Replace Connected Device

Touch to replace a Bluetooth® device from a list of those devices connected to the Bluetooth® Hands-Free Phone System.

Delete Connected Device

Touch to delete a Bluetooth® device from a list of those devices connected to the Bluetooth® Hands-Free Phone System.

Bluetooth

Touch to toggle Bluetooth® on and off.

LHA2844

Monitor, climate, audio, phone and voice recognition systems

4-81

PHONE SETTINGS

To access the phone settings:

1. Press the [

] button.

2. Touch the “Settings” key.

3. Touch the “Phone & Bluetooth” key.

4. Touch the “Phone Settings” key and adjust

the following settings as desired:

● Sort Phonebook By:

Touch “First Name” or “Last Name” to
choose how phonebook entries are alpha-
betically displayed on the screen.

● Use Phonebook From:

Touch “Handset” to use the phone’s phone-
book. Select “SIM” to use the phonebook on
the SIM card. Touch “Both” to use both
sources.

● Download Phonebook Now:

Touch to download the phonebook to the
vehicle from the chosen source.

● Record Name for Phonebook Entry:

Touch to record a name for a phonebook
entry for use with the NISSAN Voice Recog-
nition System.

● Phone Notifications for:

Touch “Driver” to have phone notifications
shown in the vehicle information display.
Touch “Both” to have phone notifications
shown in both the vehicle information display
and the center display screen.

● Text Messaging:

Touch to toggle the text message function-
ality on or off.

● Show Incoming Text for:

Touch “Driver” to have incoming text notifi-
cations shown in the vehicle information dis-
play. Touch “Both” to have text notifications
shown in both the vehicle information display
and the center display screen. Touch “Off” to
turn off all text notifications.

● Auto Reply:

Touch to toggle the auto reply functionality
on or off.

● Auto Reply Message:

Touch to indicate preferred message to be
sent when “Auto Reply” function is activated.

● Use Vehicle’s Signature:

Touch to toggle on or off the addition of the
vehicle signature to outgoing messages.

● Custom Text Messages:

Touch this option to select a custom mes-
sage to edit. There are 4 customer message
slots available.

4-82

Monitor, climate, audio, phone and voice recognition systems

The NISSAN Voice Recognition system allows
hands-free operation of the systems equipped on
this vehicle, such as the phone and navigation
systems.

To operate NISSAN Voice Recognition, press
the

button located on the steering wheel.

When prompted, speak the command for the
system you wish to activate. The command given
is picked up by the microphone and performed
when it is properly recognized. NISSAN Voice
Recognition will provide a voice response as well
as a message in the center display to inform you
of the command results.

USING THE SYSTEM

Initialization

When the ignition switch is in the ON position,
NISSAN Voice Recognition is initialized, which
takes a few seconds. When completed, the sys-
tem is ready to accept voice commands. If
the

button is pressed before the initializa-

tion completes, the system will announce: “Voice
Recognition System not ready. Please wait.”

Giving voice commands

1. Press the

button.

2. The system announces: “Please say a cat-

egory like phone or a command like points of
interest followed by a brand name”. A list of
available commands is then spoken by the
system.

3. After the tone sounds and the face icon on

the display changes, speak a command.
Available commands are discussed in this
section.

4. Voice and display feedback are provided

when the command is accepted.

● If the command is not recognized, the sys-

tem announces: “Command not recog-
nized”. Repeat the command in a clear voice.

● If you want to cancel the command or go

back to the previous menu of commands,
press the

button. The system will an-

nounce: “Cancelling voice recognition” or
“Go back” depending on the current menu
level.

● Press the BACK button on the control panel

to move back through the menus displayed
on the screen.

● If you want to adjust the volume of the voice

feedback, use the volume control switches
on the steering wheel or the volume knob on
the control panel.

● The voice command screen can also be

accessed using the control panel display:

1. Press the [

] button.

2. Touch the “Voice Commands” key.

LHA3002

NISSAN VOICE RECOGNITION
SYSTEM (if so equipped)

Monitor, climate, audio, phone and voice recognition systems

4-83

Operating tips

To get the best performance out of NISSAN
Voice Recognition, observe the following:

● Keep the interior of the vehicle as quiet as

possible. Close the windows to eliminate the
surrounding noises (traffic noises, vibration
sounds, etc.), which may prevent the system
from recognizing the voice commands cor-
rectly.

● Wait until a tone sounds before speaking a

command. Otherwise, the command will not
be received properly.

● Start speaking a command within 3.5 sec-

onds after the tone sounds.

● Speak in a natural voice without pausing

between words.

SYSTEM FEATURES

NISSAN Voice Recognition can activate the fol-
lowing systems:

● Bluetooth™ Hands-Free Phone System
● Navigation
● Audio
● Information
● My Apps

For additional information on the navigation sys-
tem, see the separate Navigation System Own-
er’s Manual.

How to say numbers

NISSAN Voice Recognition requires a certain
way to speak numbers in voice commands. Refer
to the following examples.

General rule: Either “zero” or “oh” can be used for
“0”.

Phone numbers

Speak phone numbers according to the following
example. For 1-800-662-6200, say dial number
and then speak the phone number in any of the
following formats:

● “one eight oh oh six six two six two oh oh”
● “one eight hundred six six two six two oh oh”
● “one eight zero zero six six two six two oh oh”

For the best voice recognition phone dialing re-
sults, say phone numbers as single digits. Also,
full numbers can only be spoken for “800”. For
example, you cannot say 555-6000 as “five five
five six thousand”.

LHA2780

4-84

Monitor, climate, audio, phone and voice recognition systems

BLUETOOTH® HANDS-FREE
PHONE SYSTEM VOICE
COMMANDS

To access the Bluetooth® Hands-Free Phone
System voice commands:

1. Press the

button.

2. Say “Call” and then a name in the vehicle

phonebook to call that entry. Otherwise, say
“Phone” to access various phone commands.

If the Bluetooth® has been set to “Off”, the
system announces: “Bluetooth® is off. Would
you like to turn Bluetooth® on?”

If no phone is connected to the system and the
vehicle is stationary, the system announces:
“There is no phone connected. Would you like to
connect a phone now?” Say “Yes” to connect a
phone. All further Bluetooth® Hands-Free Phone
System voice commands are only available if a
phone is connected.

If a phone is connected and Bluetooth® is set to
“On”, the following voice commands are avail-
able:

● Call (a name)

Speak the name of the contact in which you
are trying to call. System will confirm correct
contact. Say “Dial” to initiate dialing.

● Dial Number

Allows for up to 24 digits to be dialed. After
the number is entered, say “Dial” to initiate
dialing. Say “Correction” to correct the num-
ber entered. Say “Go Back” to return to the
main menu.

● List Phonebook

Starting with the first alphabetical entry in
the vehicle phonebook, the system prompts
for an additional command. Say “Dial” to call
the number of the phonebook entry. Say
“Send Text” to send a text message to the
number of the phonebook entry. Say “Next
Entry” to skip to the next alphabetical entry in
the vehicle phonebook, where the same op-
tions will then be available.

● Recent Calls

The system prompts for an additional com-
mand. Say “Missed Calls”, “Incoming Calls”
or “Outgoing Calls” to display a list of such
calls on the screen.

Speak the number of the entry displayed on
the screen to dial that number or say “Next
Page” to view entries on the next page (if
available).

● Redial

Redials the last called number.

● Read Text

Reads an incoming text message. For more
information about text messaging with the
Bluetooth® Hands-Free Phone System, see
“Bluetooth® Hands-Free Phone System
with Navigation System” in this section.

● Send Text

Sends a text message. For more information
about text messaging with the Bluetooth®
Hands-Free

Phone

System,

see

“Bluetooth® Hands-Free Phone System
with Navigation System” in this section.

● Select Phone

The system replies “Please use manual con-
trols to continue”. Use manual controls to
change the active phone from among the
listed phones connected to the vehicle.

For more information about the Bluetooth®
Hands-Free Phone System, see “Bluetooth®
Hands-Free Phone System with Navigation Sys-
tem” in this section.

Monitor, climate, audio, phone and voice recognition systems

4-85

NAVIGATION SYSTEM VOICE
COMMANDS

The following voice commands are available for
the Navigation System:

● Street Address (address)
● Points of Interest (name)
● POI by Category
● Home
● Address Book
● Previous Destinations
● Enter Address in Steps
● Cancel Route

For more information about these commands, see
the separate Navigation System Owner’s Manual.

AUDIO SYSTEM VOICE
COMMANDS

To access the audio system voice commands:

1. Press the button.

2. Say “Audio”

3. Speak a command from the following avail-

able commands:

● Play (AM, FM, etc.)

Allows user to select radio band

● Tune AM (number)

Allows user to tune directly to a desired AM
frequency

● Tune FM (number)

Allows user to tune directly to a desired FM
frequency

● SXM channel (number)

Allows user to tune directly to a desired
SXM station (if so equipped)

● CD Track (number)

Allows user to select track to be played

● Play Song (name)

Allows user to select song name to be
played

● Play Artist (name)

Allows user to select artist to be played

● Play Album (name)

Allows user to select album name to be
played

For more information about the audio system, see
“Audio system” in this section.

INFORMATION VOICE COMMANDS

The following voice commands are available for
the information functions of the Navigation Sys-
tem:

● Traffic
● Fuel Prices
● Stocks
● Movie Listings
● Current Weather
● Weather Map
● 5 — day Forecast
● 6 — hour Forecast

For more information about these commands,
see the separate Navigation System Owner’s
Manual.

MY APPS VOICE COMMANDS

Many Apps can be accessed using this voice
command. See “NissanConnect™ App Smart-
phone Integration” in this section for more infor-
mation.

4-86

Monitor, climate, audio, phone and voice recognition systems

HELP VOICE COMMANDS

The following voice commands can be spoken to
have the system provide instructions and tips for
using the NISSAN Voice Recognition system.

● List Commands
● What Can I Say?
● General Help
● Quit
● Exit

TROUBLESHOOTING GUIDE

The system should respond correctly to all voice
commands without difficulty. If problems are en-
countered, follow the solutions given in this guide
for the appropriate error. Where the solutions are
listed by number, try each solution in turn, starting
with number one, until the problem is resolved.

Symptom/error message

Solution

The system responds “Command Not
Recognized” or the system fails to rec-
ognize the command correctly.

1. Ensure that the command format is valid. Use the “List Commands” or “What Can I Say?” command under the “Help” menu.

2. Speak clearly without pausing between words and at a level appropriate to the ambient noise level.

3. Ensure that the ambient noise level is not excessive (for example, with the windows open or the defroster on).

NOTE:

If it is too noisy to use the phone, it is likely that voice commands will not be recognized.

4. If optional words of the command have been omitted, then the command should be tried with these in place.

Monitor, climate, audio, phone and voice recognition systems

4-87

WARNING

● Do not leave children or adults who

would normally require the assistance
of others alone in your vehicle. Pets
should also not be left alone. They
could accidentally injure themselves or
others through inadvertent operation of
the vehicle. Also, on hot, sunny days,
temperatures in a closed vehicle could
quickly become high enough to cause
severe or possibly fatal injuries to
people or animals.

● Properly secure all cargo to help pre-

vent it from sliding or shifting. Do not
place cargo higher than the seatbacks.
In a sudden stop or collision, unsecured
cargo could cause personal injury.

EXHAUST GAS (carbon monoxide)

WARNING

● Do not breathe exhaust gases; they

contain colorless and odorless carbon
monoxide. Carbon monoxide is danger-
ous. It can cause unconsciousness or
death.

● If you suspect that exhaust fumes are

entering the vehicle, drive with all win-
dows fully open, and have the vehicle
inspected immediately.

● Do not run the engine in closed spaces

such as a garage.

● Do not park the vehicle with the engine

running for any extended length of time.

● Keep the rear vent windows, lift gates,

doors and trunk lids (if so equipped)
closed while driving, otherwise exhaust
gases could be drawn into the passen-
ger compartment. If you must drive with
one

these

open,

follow

these

precautions:

1. Open all the windows.

2. Turn the air recirculation mode off

and set the fan speed control to the
highest level to circulate the air.

● The exhaust system and body should be

inspected

qualified

mechanic

whenever:

a. The vehicle is raised for service.

b. You suspect that exhaust fumes are

entering

into

the

passenger

compartment.

c. You notice a change in the sound of

the exhaust system.

d. You have had an accident involving

damage to the exhaust system, un-
derbody, or rear of the vehicle.

THREE-WAY CATALYST

The three-way catalyst is an emission control
device installed in the exhaust system. Exhaust
gases in the three-way catalyst are burned at
high temperatures to help reduce pollutants.

WARNING

● The exhaust gas and the exhaust sys-

tem are very hot. Keep people, animals
or flammable materials away from the
exhaust system components.

● Do not stop or park the vehicle over

flammable materials such as dry grass,
waste paper or rags. They may ignite
and cause a fire.

PRECAUTIONS WHEN STARTING
AND DRIVING

5-2

Starting and driving

CAUTION

● Do not use leaded gasoline. Deposits

from leaded gasoline will seriously re-
duce the three-way catalyst’s ability to
help reduce exhaust pollutants.

● Keep your engine tuned up. Malfunc-

tions in the ignition, fuel injection, or
electrical systems can cause overrich
fuel flow into the three-way catalyst,
causing it to overheat. Do not keep driv-
ing if the engine misfires, or if notice-
able loss of performance or other un-
usual

operating

conditions

are

detected. Have the vehicle inspected
promptly by a NISSAN dealer.

● Avoid driving with an extremely low fuel

level. Running out of fuel could cause
the engine to misfire, damaging the
three-way catalyst.

● Do not race the engine while warming it

up.

● Do not push or tow your vehicle to start

the engine.

TIRE PRESSURE MONITORING
SYSTEM (TPMS) (if so equipped)

Each tire, including the spare (if provided),
should be checked monthly when cold and in-
flated to the inflation pressure recommended by
the vehicle manufacturer on the vehicle placard
or tire inflation pressure label. (If your vehicle has
tires of a different size than the size indicated on
the vehicle placard or tire inflation pressure label,
you should determine the proper tire inflation
pressure for those tires.)

As an added safety feature, your vehicle has been
equipped with a Tire Pressure Monitoring System
(TPMS) that illuminates a low tire pressure telltale
when one or more of your tires is significantly
under-inflated. Accordingly, when the low tire
pressure telltale illuminates, you should stop and
check your tires as soon as possible, and inflate
them to the proper pressure. Driving on a signifi-
cantly under-inflated tire causes the tire to over-
heat and can lead to tire failure. Under-inflation
also reduces fuel efficiency and tire tread life, and
may affect the vehicle’s handling and stopping
ability.

Please note that the TPMS is not a substitute for
proper tire maintenance, and it is the driver’s
responsibility to maintain correct tire pressure,

even if under-inflation has not reached the level to
trigger illumination of the TPMS low tire pressure
telltale.

Your vehicle has also been equipped with a
TPMS malfunction indicator to indicate when the
system is not operating properly. The TPMS mal-
function indicator is combined with the low tire
pressure telltale. When the system detects a
malfunction, the telltale will flash for approxi-
mately one minute and then remain continuously
illuminated. This sequence will continue upon
subsequent vehicle start-ups as long as the mal-
function exists. When the malfunction indicator is
illuminated, the system may not be able to detect
or signal low tire pressure as intended. TPMS
malfunctions may occur for a variety of reasons,
including the installation of replacement or alter-
nate tires or wheels on the vehicle that prevent
the TPMS from functioning properly. Always
check the TPMS malfunction telltale after replac-
ing one or more tires or wheels on your vehicle to
ensure that the replacement or alternate tires and
wheels allow the TPMS to continue to function
properly.

Additional information:

● The TPMS does not monitor the tire

pressure of the spare tire.

Starting and driving

5-3

● The TPMS will activate only when the vehicle

is driven at speeds above 16 MPH
(25 km/h). Also, this system may not detect a
sudden drop in tire pressure (for example a
flat tire while driving).

● The low tire pressure warning light does not

automatically turn off when the tire pressure
of your tires are adjusted. After the tires are
inflated to the recommended pressure, the
vehicle must be driven at speeds above
16 MPH (25 km/h) to activate the TPMS and
turn off the low tire pressure warning light.
Use a tire pressure gauge to check the tire
pressure.

● Tire pressure rises and falls depending on

the heat caused by the vehicle’s operation
and the outside temperature. Low outside
temperature can lower the temperature of
the air inside the tire which can cause a
lower tire inflation pressure. This may cause
the low tire pressure warning light to illumi-
nate. If the warning light illuminates, check
the tire pressure for all four tires.

● The Tire and Loading Information label (also

referred to as the vehicle placard or tire
inflation pressure label) is located in the
driver’s door opening.

For additional information, see “Low tire pressure
warning light” in the “Instruments and controls”
section and “Tire Pressure Monitoring System
(TPMS)” in the “In case of emergency” section.

WARNING

● If the low tire pressure warning light

illuminates while driving, avoid sudden
steering maneuvers or abrupt braking,
reduce vehicle speed, pull off the road
to a safe location and stop the vehicle
as soon as possible. Driving with under-
inflated tires may permanently damage
the tires and increase the likelihood of
tire failure. Serious vehicle damage
could occur and may lead to an accident
and could result in serious personal in-
jury. Check the tire pressure for all four
tires. Adjust the tire pressure to the
recommended

COLD

tire

pressure

shown on the Tire and Loading Informa-
tion label to turn the low tire pressure
warning light OFF. If you have a flat tire,
replace it with a spare tire as soon as
possible. (See “Flat tire” in the “In case
of emergency” section for changing a
flat tire.)

● When a spare tire is mounted or a wheel

is replaced, the TPMS will not function
and the low tire pressure warning light
will flash for approximately 1 minute.
The light will remain on after 1 minute.
Contact your NISSAN dealer as soon as
possible for tire replacement and/or
system resetting.

● Replacing tires with those not originally

specified by NISSAN could affect the
proper operation of the TPMS.

● Do not inject any tire liquid or aerosol

tire sealant into the tires, as this may
cause a malfunction of the tire pressure
sensors.

CAUTION

Do not place metalized film or any metal
parts (antenna, etc.) on the windows. This
may cause poor reception of the signals
from the tire pressure sensors, and the
TPMS will not function properly.

Some devices and transmitters may temporarily
interfere with the operation of the TPMS and
cause the low tire pressure warning light to illu-
minate.

5-4

Starting and driving

Nissan Versa Sedan (2015 year). Instruction - part 14