|
|
TM-146 < DTC/CIRCUIT DIAGNOSIS > [CVT: RE0F11A] P0705 TRANSMISSION RANGE SENSOR A Is the inspection result normal? YES >> GO TO 12. NO >> Repair or replace malfunctioning parts. 10. CHECK L POSITION SWITCH CIRCUIT (PART 1) 1. Turn ignition switch OFF. 2. Disconnect TCM connector. 3. Check continuity between TCM harness connector terminals. Is the inspection result normal? YES >> GO TO 11. NO >> Repair or replace malfunctioning parts. 11. CHECK L POSITION SWITCH CIRCUIT (PART 2) 1. Disconnect transmission position switch connector. 2. Turn ignition switch ON. 3. Check voltage between TCM harness connector terminal and ground. Is the inspection result normal? YES >> GO TO 12. NO >> Repair or replace malfunctioning parts. 12. CHECK TRANSMISSION RANGE SWITCH Check transmission range switch. Refer to TM-146, "Component Inspection (Transmission Range Switch)" Is the check result normal? YES >> Check intermittent incident. Refer to GI-41, "Intermittent Incident" . NO >> Repair or replace malfunctioning parts. Component Inspection (Transmission Range Switch) INFOID:0000000009019925 1. CHECK TRANSMISSION RANGE SWITCH Check continuity between transmission range switch connector terminals. + − Voltage (Approx.) TCM Connector Terminal F44 6 Ground 0 V TCM Continuity Connector Terminal F44 2 4 Not existed 5 6 7 + − Voltage (Approx.) TCM Connector Terminal F44 2 Ground 0 V Transmission range switch Condition Continuity Terminal 7 – 10 Manual lever: “P” and “N” positions Existed Other than the above Not existed |