|
|
|
445 6-1. Maintenance and care 6 Maintenance and care Remove dirt and dust using a vac- If dirt cannot be removed, wipe it off ■ Shampooing the carpets There are several commercial foaming- type cleaners available. Use a sponge or brush to apply the foam. Rub in overlapping circles. Do not use water. Wipe dirty sur- faces and let them dry. Excellent results are obtained by keeping the carpet as dry as possible. ■ Handling the seat belts Clean with mild soap and lukewarm water using a cloth or sponge. Also check the belts periodically for excessive wear, fray- ing or cuts. NOTICE ■ When using a high pressure car wash ● When washing the vehicle, do not spray the camera or its surrounding area directly with a high pressure washer. Shock applied from high pres- sure water may cause the device to not operate normally. ● Do not spray water directly on the radar which is equipped behind the emblem. Otherwise it may cause the device to be damaged. ● Do not bring the nozzle tip close to boots (rubber or resin manufactured cover), connectors or the following parts. The parts may be damaged if they come into contact with high-pressure water. • Traction related parts • Steering parts • Suspension parts • Brake parts ● Keep the cleaning nozzle at least 11.9 in. (30 cm) away from the vehicle body. Otherwise resin section, such as moldings and bumpers, may be deformed and damaged. Also, do not continuously hold the nozzle in the same place. ● Do not spray the lower part of the windshield continuously. If water enters the air conditioning system intake located near the lower part of the windshield, the air conditioning system may not operate correctly. ● Do not wash the underside of the vehi- cle using a high pressure car washer. Cleaning and protecting the Perform cleaning in a manner Protecting the vehicle interior WARNING ■ Water in the vehicle ● Do not splash or spill liquid in the vehi- cle. Doing so may cause electrical compo- nents, etc., to malfunction or catch fire. |