|
|
recirculation (EGR) valve fault P010036 Mass or volume air flow A circuit - signal frequency too low Mass air flow (MAF) sensor circuit: short circuit to ground MAF sensor circuit: short circuit to power MAF sensor circuit: open circuit MAF sensor fault Check the MAF sensor and circuit. Refer to the electrical guides. Install a new MAF sensor if necessary. REFER to: Mass Air Flow (MAF) Sensor (303-14 Electronic Engine Controls - 2.4L Duratorq-TDCi HPCR (103kW/140PS) - Puma, Removal and Installation). Clear the DTCs and test for normal operation. P010037 Mass or volume air flow A circuit - signal frequency too high Mass air flow (MAF) sensor circuit: short circuit to ground MAF sensor circuit: short circuit to power MAF sensor circuit: open circuit MAF sensor fault Check the MAF sensor and circuit. Refer to the electrical guides. Install a new MAF sensor if necessary. REFER to: Mass Air Flow (MAF) Sensor (303-14 Electronic Engine Controls - 2.4L Duratorq-TDCi HPCR (103kW/140PS) - Puma, Removal and Installation). Clear the DTCs and test for normal operation. P010064 Mass or volume air flow A circuit - signal plausibility failure Mass air flow (MAF) sensor circuit: short circuit to ground MAF sensor circuit: short circuit to power MAF sensor circuit: open circuit MAF sensor fault Check the MAF sensor and circuit. Refer to the electrical guides. Install a new MAF sensor if necessary. REFER to: Mass Air Flow (MAF) Sensor (303-14 Electronic Engine Controls - 2.4L Duratorq-TDCi HPCR (103kW/140PS) - Puma, Removal and Installation). Clear the DTCs and test for normal operation. P01102F Intake air temperature (IAT) sensor 1 circuit - signal erratic • NOTE: The IAT sensor 1 is part of the mass air flow (MAF) sensor IAT sensor 1 circuit: short circuit to power IAT sensor 1 circuit: short circuit to ground IAT sensor 1 circuit: open circuit IAT sensor 1 fault Check the IAT sensor 1 and circuit. Refer to the electrical guides. Install a new MAF sensor if necessary. REFER to: Mass Air Flow (MAF) Sensor (303-14 Electronic Engine Controls - 2.4L Duratorq-TDCi HPCR (103kW/140PS) - Puma, Removal and Installation). Clear the DTCs and test for normal operation. P011011 Intake air temperature (IAT) sensor 1 circuit - circuit short to ground • NOTE: The IAT sensor 1 is part of the mass air flow (MAF) sensor IAT sensor 1 circuit: short circuit to ground IAT sensor 1 fault Check the IAT sensor 1 and circuit. Refer to the electrical guides. Install a new MAF sensor if necessary. REFER to: Mass Air Flow (MAF) Sensor (303-14 Electronic Engine Controls - 2.4L Duratorq-TDCi HPCR (103kW/140PS) - Puma, Removal and Installation). Clear the DTCs and test for normal operation. P011015 Intake air temperature (IAT) sensor 1 circuit - circuit short to battery or open • NOTE: The IAT sensor 1 is part of the mass air flow (MAF) sensor IAT sensor 1 circuit: short circuit to power IAT sensor 1 circuit: open circuit IAT sensor 1 fault Check the IAT sensor 1 and circuit. Refer to the electrical guides. Install a new MAF sensor if necessary. REFER to: Mass Air Flow (MAF) Sensor (303-14 Electronic Engine Controls - 2.4L Duratorq-TDCi HPCR (103kW/140PS) - Puma, Removal and Installation). Clear the DTCs and test for normal operation. P01152F Engine coolant temperature (ECT) (cylinder head temperature (CHT)) sensor 1 circuit - signal erratic CHT sensor circuit: short circuit to power CHT sensor circuit: short circuit to ground CHT sensor circuit: open circuit |