Jeep Wagoneer (2022 year). Manual in english

MULTIMEDIA

221

Display Brightness With Headlights ON

This setting will allow you to set the brightness when the headlights are on. To

access this setting, Display Mode must be set to Manual. The “+” setting will

increase the brightness; the “-” will decrease the brightness.

Display Brightness With Headlights OFF

This setting will allow you to set the brightness when the headlights are off. To

access this setting, Display Mode must be set to Manual. The “+” setting will

increase the brightness; the “-” will decrease the brightness.

Set Theme

This setting will allow you to change the display theme.

Units

This setting will allow you to change the units. The available options are

“Speed” (MPH or km/h), “Distance” (mi or km), “Current Consumption” (MPG

[US], MPG [UK], L/100 km, or km/L), “Pressure” (psi, kPa, or bar), and

“Temperature” (°C or °F) units of measurement independently.

Touchscreen Beep

This setting will allow you to turn the touchscreen beep on or off.

Control Screen Timeout

This setting allows you to set the Control Screen to turn off automatically after

five seconds or stay open until manually closed.

Navigation Next Turn Pop-ups Displayed In Cluster

This setting will display Navigation prompts in the Instrument Cluster Display.

Phone Pop-ups Displayed In Cluster

This setting will display smartphone notifications and messages in the

Instrument Cluster Display.

Message Pop-Ups Displayed with Button Press

This setting will turn message notifications on or off.

Ready To Drive Pop-ups

This setting will enable the Ready To Drive pop-ups in the Instrument Cluster Display.

Auto Launch with Off-Road+

This setting will determine how the Off-Road feature is launched through the

radio when turning the vehicle on. The options are “Off”, “Forward Camera” (if

equipped), and “Off Road Pages”.

Setting Name

Description

222

MULTIMEDIA

Safety & Driving Assistance

When the Safety & Driving Assistance button is pressed on the touchscreen, the system displays the options related to the vehicle’s safety settings. These

options will differ depending on the features equipped on the vehicle. The settings may display in list form or within subfolders on the screen. To access a

subfolder, select the desired folder; the available options related to that feature will then display on the screen.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Forward Collision Warning — Located In Automatic Emergency Braking

Submenu

This setting will turn the Forward Collision Warning system on or off. The “Off”

setting will deactivate the FCW system. The “Warning Only” setting will provide

only an audible chime when a collision is detected. The “Warning + Active

Braking” setting will provide an audible chime and apply some brake pressure

when a collision is detected.

Forward Collision Warning Sensitivity — Located In Automatic Emergency

Braking Submenu

This setting will change the distance at which the Forward Collision Warning

(FCW) alert sounds. The “Medium” setting will have the FCW system signal

when an object is in view, and the possibility of a collision is detected. The

“Near” setting will have the FCW system signal when the object is closer to the

vehicle. The “Far” setting will have the FCW system signal when an object is at

a far distance from the vehicle.

Pedestrian Emergency Braking — Located In Automatic Emergency Braking

Submenu

This setting will turn the Pedestrian Emergency Braking system on or off. This

setting is located in Automatic Emergency Braking.

Active Lane Management

This setting will alert the driver and/or vibrate the steering wheel when a lane

departure is detected. The available options are “Vibration Only”, “Steering

Assist Only”, and “Vibration + Steering Assist”.

Traffic Sign Assist

This setting will turn Traffic Sign Assist on or off.

Traffic Sign Assist Warning

This setting will allow you to set the warning type related to the traffic sign.

The available options are “Off”, “Visual”, and “Visual + Chime”.

MULTIMEDIA

223

Night Vision Video Warning

This setting will turn the Night Vision Video Warning and green/gray cluster

indicator light on or off.

ParkSense

This setting will change the type of ParkSense alert when a close object is

detected and provide both an audible chime and a visual display.

Front ParkSense Volume

This setting adjusts the volume of the Front ParkSense system. The available

settings are “Low”, “Medium”, and “High”.

Rear ParkSense Volume

This setting adjusts the volume of the Rear ParkSense system. The available

settings are “Low”, “Medium”, and “High”.

Active ParkSense Mode

This setting will adjust the level of vehicle control when the Active ParkSense

Mode is active. The available settings are “Full Auto” and “Steering Only”

Active ParkSense Proximity Chime

This setting will turn the Active ParkSense Proximity Chime on or off.

Side Distance Warning

This setting will adjust the warning for side distance. The available options are

“Off”, “Sound Only”, and “Sound & Display”.

Drowsy Driver Detection

This setting will monitor the driver’s driving habits and warn you of any

changes, indicating that the driver may be drowsy. The available options are

“On” and “Off”.

Blind Spot Alert

This setting will change the type of alert provided when an object is detected

in the vehicle’s blind spot. The “Off” setting will turn off Blind Spot Alert. The

“Lights” setting will activate the Blind Spot Alert lights on the outside mirrors.

The “Lights & Chime” setting will activate the lights on the outside mirrors and

an audible chime.

Setting Name

Description

224

MULTIMEDIA

Electric Power Steering Default

This setting will change the Electric Power Steering mode. The available

options are “Comfort” for a lower effort steering experience, “Normal” for the

standard effort steering experience, and “Sport” for a higher effort steering

experience.

Power Side Step

This setting will activate the Power Side Step. The “Auto” setting will lower the

step when the door is opened and retract it once the door is closed. The “Off”

setting will deactivate the feature.

Hill Start Assist

This setting will turn the Hill Start Assist system on or off.

Tire Fill Assist

This setting will turn Tire Fill Assist on or off.

New Speed Zone Indication

This setting will allow you to set if the system will warn you that the speed

limit has changed in an area. The available options are “Off”, “Visual”, and

“Visual + Chime”.

Active Lane Management Warning

This setting will change the distance at which the steering wheel will provide

lane departure feedback. The available settings are “Early”, “Medium”, and

“Late”.

Active Lane Management Strength

This setting will change the strength of the steering wheel feedback during a

lane departure. The available settings are “Low”, “Medium”, and “High”.

Rear ParkSense Braking Assist

This setting will turn the Rear ParkSense Braking Assist on or off.

Setting Name

Description

MULTIMEDIA

225

Clock

When the Clock button is pressed on the touchscreen, the system displays the different options related to the vehicle’s internal clock.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Sync Time With GPS

This setting will sync the time to the GPS receiver in the system. The system

will control the time via the GPS location.

Set Time

This setting will allow you to set the hours and minutes. Sync Time With GPS

must be off for this setting to be available. The “+” setting will increase the

hours and minutes. The “-” setting will decrease the hours and minutes.

Time Format

This setting will allow you to set the time format (AM/PM). Sync Time With GPS

must be off for this setting to be available. The “12 hrs” setting will set the

time to a 12-hour format. The “24 hrs” setting will set the time to a 24-hour

format.

Set Date

This setting will allow you to set the day, month and year. Using “+” or “-”, you

can scroll through the available days, months, and years.

Show Time and Date During Screen Off

This setting will allow you to show the time and date while the screen is off.

Available options are “On” and “Off”.

Set Time Hours

This setting will allow you to set the hours. Sync Time With GPS must be off for

this setting to be available. The “+” setting will increase the hours. The “-”

setting will decrease the hours.

Set Time Minutes

This setting will allow you to set the minutes. Sync Time With GPS must be off

for this setting to be available. The “+” setting will increase the minutes. The

“-” setting will decrease the minutes.

Show Time in Status Bar

This setting will place the time in the radio’s status bar.

226

MULTIMEDIA

Phone/Bluetooth®

When the Phone/Bluetooth® button is pressed on the touchscreen, the system displays the options related to Bluetooth® connectivity from an external audio

device or smartphone. The list of paired audio devices or smartphones can be accessed from this menu.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Device Manager

This setting will open the Device Manager main screen.

Do Not Disturb All

This setting will open the Do Not Disturb All settings menu. The available

options are “On” and “Off”.

Enable Two Active Phones

This setting will enable or disable two active phones within the vehicle. The

setting options are “On” and “Off”.

Phone Pop-Ups Displayed In Cluster

This setting will activate phone message pop-ups in the Instrument Cluster

Display.

Do Not Disturb

This setting will open the Do Not Disturb settings menu. The settings are “Auto

Reply” (both, text, call), “Auto Reply Message” (custom, default), and “Custom

Auto Reply Message” (create message).

Phone Repetition

This setting will turn the Phone Repetition function on or off.

MULTIMEDIA

227

Voice

Navigation

When the Voice button is pressed on the touchscreen, the system displays the options related to the vehicle’s Voice Recognition feature.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Voice Options

This setting will allow you to change the system’s voice to either “Male” or

“Female”.

Wake Up Word

This setting will allow you to set the system’s “Wake Up” word. An available

options is “Hey, Uconnect”.

Voice Barge-In

This setting allows you to respond to a Voice Response before the statement

is completed by the system. The available options are “On” and “Off”.

Show Command List

This setting will allow you to turn the Command List on or off. The “Always”

setting will always show the Command List. The “With Help” setting will show

the Command List and provide a brief description of what the command does.

The “Never” setting will turn the Command List off.

When the Navigation button is pressed on the touchscreen, the system displays options related to the vehicle’s built-in Navigation system. These settings can

change which icons display on the map, how “time to arrival is calculated”, and route types.
For more information on Navigation and settings, refer to the Uconnect Owner’s Manual Supplement.

228

MULTIMEDIA

Trailer

When the Trailer button is pressed on the touchscreen, the system will display settings related to trailer towing.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Current Trailer

Select from “Trailer 1”, “Trailer 2”, “Trailer 3”, and “Trailer 4”. These trailer

designations can be used to save different trailer settings.

Trailer Name

This setting will personalize the trailer name depending on the type of trailer

you are hauling. Select the trailer name from the following list: trailer, boat,

car, cargo, dump, equipment, flatbed, horse, gooseneck, livestock,

motorcycle, snowmobile, travel, utility, and 5th wheel.

Braking

This setting will set the system to a specific trailer type. The available options

are “Light Electric”, “Heavy Electric”, “Light Electric-Over-Hydraulic”, and

“Heavy Electric-Over-Hydraulic”.

MULTIMEDIA

229

Camera

Mirrors & Wipers

When the Camera button is pressed on the touchscreen, the system displays the options related to the vehicle’s camera features.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Surround View Camera Delay

This setting will add a timed delay to the Surround View Camera when shifting

out of REVERSE.

Surround View Camera Guidelines

This setting will turn the Surround View Camera Guidelines on or off.

ParkView Backup Camera Delay

This setting will add a timed delay to the ParkView Backup Camera when

shifting out of REVERSE.

ParkView Backup Camera Active Guidelines

This setting will turn the ParkView Backup Camera Active Guidelines on or off.

Forward Facing Camera Guidelines

This setting will turn the Forward Facing Camera Guidelines on or off.

When the Mirrors & Wipers button is pressed on the touchscreen, the system displays the options related to the vehicle’s mirrors and wipers.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Tilt Side Mirrors In Reverse

This setting will tilt the outside side-view mirrors when the ignition is in the ON/

RUN position and the transmission gear selector is in the REVERSE position. The

mirrors will move back to their previous position when the transmission is

shifted out of REVERSE. The available settings are “On” and “Off”.

230

MULTIMEDIA

Lights

Auto Folding Side Mirrors

This setting will automatically fold and unfold the side-view mirrors when the

vehicle is turned on or off. The available options are “On” and “Off”.

Rain Sensing Auto Wipers

This setting will turn the Rain Sensing Auto Wipers on or off.

Headlights With Wipers

This setting will turn the headlights on when the wipers are activated. Setting

options are “On” and “Off”.

Setting Name

Description

When the Lights button is pressed on the touchscreen, the system displays the options related to the vehicle’s exterior and interior lights.



When the “Daytime Running Lights” feature is selected, the daytime running lights can be turned on or off. This feature is only allowed by law in the country

of the vehicle purchased.



Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Ambient Color Personalization

This setting will redirect to a new menu that will allow you to change the

ambient lighting color in the cabin.

Interior Ambient Lighting

This setting will allow you to adjust the brightness of the interior ambient

lights. The available options are “Level 1” through “Level 6”.

Headlight Off Delay

This setting will allow you to set the amount of time it takes for the headlights

to shut off after the vehicle is turned off. The available settings are “0 sec”,

“30 sec”, “60 sec”, and “90 sec”.

Headlight Illumination On Approach

This setting will allow you to set the amount of time it takes for the headlights

to shut off after the vehicle is unlocked. “Greeting Lights” must be selected

and “Headlight Illumination on Approach” must be selected above 0 seconds

for the feature to be enabled. The available settings are “0 sec”, “30 sec”, “60

sec”, and “90 sec”.

MULTIMEDIA

231

Headlights with Wipers

This setting will turn the headlights on when the wipers are activated.

Proximity Wake-Up

Proximity detection is a system which activates specific interior and exterior

lights as the vehicle is approached with a valid key fob. This feature provides

an increased sense of welcome and security as the user enters the vehicle in

the dark. This setting will turn the Proximity Wake-Up on or off.

NOTE:

For the exterior lighting to be activated, Headlight Illumination On Approach

must be set to a value other than zero.

Greeting Lights

When the “Greeting Lights” feature is selected, it enables “Headlight

Illumination On Approach”. When “Headlight Illumination On Approach” is

selected, it allows the adjustment of the amount of time the headlights

remain on after the doors are unlocked with the key fob. “Greeting Lights”

must be selected and “Headlight Illumination On Approach” must be selected

above zero seconds for the feature to be enabled. The available settings are

“On” and “Off”.

Auto Dim High Beams

This setting will allow you to turn the Auto Dim High Beams on or off.

Daytime Running Lights

This setting will allow you to turn the Daytime Running Lights on or off.

Cornering Lights

When this setting is selected, if the steering wheel rotation angle is large or

the turn signal indicators are on, a light (incorporated in the fog light) will turn

on, on the relevant side to improve visibility at night.

Flash Lights With Lock

This setting will allow you to turn the flashing of the lights when the Lock button

is pushed on the key fob on or off. Available settings are “On” and “Off”.

Flash Lights With Suspension Lower

This setting will allow you to turn the flashing of the lights when the

Suspension Lowering button is pushed on the key fob on or off.

Setting Name

Description

232

MULTIMEDIA

Brakes

Doors & Locks

When the Brakes button is pressed on the touchscreen, the system will display a setting related to the vehicle’s brake system.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Auto Park Brake

This setting will turn the Auto Park Brake on or off.

Brake Service

This setting will allow you to set the brakes for service. When the setting is

selected, a pop-up will display “Yes” or No”.

When the Doors & Locks button is pressed on the touchscreen, the system displays the options related to locking and unlocking the vehicle’s doors.

NOTE:



The Auto Door Locks feature default condition is enabled. When enabled, the door locks will lock automatically when the vehicle’s speed exceeds 12 mph

(20 km/h). The Auto Door Locks feature can be enabled or disabled by an authorized dealer per written request of the customer. Please see an authorized

dealer for service.



Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Auto Door Locks

This setting will allow you to change if the doors lock automatically when the

vehicle reaches 12 mph (19 km/h).

Auto Unlock On Exit

This setting will unlock the doors when any of the doors are opened from the inside.

Flash Lights With Lock

This setting will allow you to turn the flashing of the lights when the Lock button

is pushed on the key fob on or off. Available settings are “On” and “Off”.

MULTIMEDIA

233

Sound Horn With Lock

This setting will sound the horn when the Lock button is pushed on the key fob.

The “Off” setting will not sound the horn when the Lock button is pushed. The “1st

Press” setting will sound the horn when the Lock button is pushed once. The “2nd

Press” setting will sound the horn when the Lock button is pushed twice.

Sound Horn With Remote Start

This setting will sound the horn when the remote start is activated from the

key fob.

Remote Door Unlock, Door Lock/1st Press Of Key Fob Unlocks

This setting will change how many pushes of the Unlock button on the key fob

are needed to unlock all the doors. The “Driver Door” setting will only unlock

the driver door on the first push on the Unlock button. The “All Doors” setting

will unlock all doors with only one push of the Unlock button.

Passive Entry

This setting will allow you to turn the Passive Entry feature (Keyless Enter ‘N

Go™) on or off.

Personal Settings Linked To Key Fob

This setting will recall preset radio stations and driver seat position that have

been linked to the key fob.

Power Liftgate Alert

This setting will chime an audible alert when the power liftgate is raising or

lowering. Selectable options are “On” and “Off”.

Hands-Free Power Liftgate

This setting will use hands-free technology to automatically open or close the

power liftgate. Selectable options are “On” and “Off”.

Auto Relock

This setting will lock the doors after 30 seconds of the doors remaining

unlocked. The available options are “On” and “Off”.

Setting Name

Description

234

MULTIMEDIA

Seats & Comfort

When Seats & Comfort button is pressed on the touchscreen, the system displays the options related to the vehicle’s comfort systems when remote start has

been activated or the vehicle has been started.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Easy Exit Seats

This setting will automatically move the driver seat rearward when the engine

is shut off. The available settings are “On” and “Off”.

Auto-On Driver Heated/Ventilated Seat & Heated Steering Wheel With Vehicle

Start

This setting will activate the vehicle’s comfort systems and heated seats or

heated steering wheel when the vehicle is remote started or ignition is

started. The “Off” setting will not activate the comfort systems. The “Remote

Start” setting will only activate the comfort systems when using Remote

Start. The “All Start” setting will activate the comfort systems whenever the

vehicle is started.

3rd Row Seat Recline Lockout

This setting will activate the 3rd Row Seat Recline Lockout. Selectable options

are “Off”, “Lock On Ignition” and “Always Locked”.

MULTIMEDIA

235

Key Off Options

When the Key Off Options button is pressed on the touchscreen, the system displays the options related to vehicle shutoff. These settings will only activate

when the ignition is set to OFF.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Easy Exit Seat

This setting adjusts the seats to make exiting the vehicle easier.

Key Off Power Delay

This setting will keep certain electrical features running after the engine is

turned off. When any door is opened, the electronics will deactivate. The

available settings are “0 sec”, “45 sec”, “5 min”, and “10 min”.

Headlight Off Delay

This setting will allow you to set the amount of time the headlights remain on

after the vehicle has been turned off. The available settings are “0 sec”, “30

sec”, “60 sec”, and “90 sec”.

Radio Off Delay

This setting will keep the radio on for the selected amount of time after

vehicle shut off. The available options are “0 sec”, “45 sec”, “5 min”, and

“10 min”.

Radio Off With Door

This setting will keep the radio on when a door is opened or until the Radio Off

Delay time is reached. The available settings are “On” and “Off”.

Windows With Key Fob

This setting will allow you to control window function while the vehicle is off.

The available options are “On” and “Off”.

236

MULTIMEDIA

Suspension

When the Suspension button is pressed on the touchscreen, the system will display settings related to the vehicle’s air suspension.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Sound Horn With Lower

This setting will allow you to sound the horn when the Suspension Lowering

button is pushed on the key fob.

Flash Lights With Lower

This setting will allow you to turn the flashing of the lights when the

Suspension Lowering button is pushed on the key fob on or off.

Auto Entry/Exit Suspension

This setting will turn the Auto Entry/Exit Suspension system on or off.

Display Suspension Messages

This setting will display suspension messages in the Instrument Cluster

Display. The “All” setting will display all available messages. The “Warnings

Only” setting will only display warning messages.

Tire Jack Mode

This setting will disable the air suspension system to assist in changing a

spare tire.

Auxiliary Modes

This setting will allow you to set the Auxiliary Suspension Mode. The available

options are “Off”, “Transport Mode”, and “Wheel Alignment Mode”. In

Transport Mode, the vehicle will not auto level when being transported by

another vehicle. In Wheel Alignment Mode, the vehicle will not auto level when

a wheel alignment is being performed.

Jeep Wagoneer (2022 year). Manual in english - page 14