|
|
SEF139P Generic Scan Tool (GST) =NHEC0035 DESCRIPTION NHEC0035S01 Generic Scan Tool (OBDII scan tool) complying with SAE J1978 SEF289X GST INSPECTION PROCEDURE NHEC0035S02 1. Turn ignition switch OFF. 2. Connect “GST” to data link connector, which is located under SEF398S 3. Turn ignition switch ON. 4. Enter the program according to instruction on the screen or in (*: Regarding GST screens in this section, sample screens are SEF416S 5. Perform each diagnostic mode according to each service pro- For further information, see the GST Operation Manual of the GI MA EM LC FE AT AX SU BR ST RS BT HA SC EL IDX ON BOARD DIAGNOSTIC SYSTEM DESCRIPTION Generic Scan Tool (GST) EC-103 |