Hyundai Getz (2010 year). Instruction - part 15
CONSUMER INFORMATION
8- 5
I060A01FC-GAT
I070A01A-AAT
I090A03S-GAT
TIRE ROTATION
TIRE BALANCING
WHEN TO REPLACE TIRES
A tire that is out of balance may affect
1.6 mm (0.06 in.)
handling and tire wear. The tires on
your Hyundai were balanced before
the car was delivered but may need
balancing again during the years you
own the car.
Whenever a tire is dismounted for
repair, it should be rebalanced before
being reinstalled on the car.
Wear indicator
Spare tire
HA1409
HGK248
The original tires on your car have tread
Tires should be rotated every 10,000
I080A01A-AAT
wear indicators. The tread wear indica-
km (6,000 miles). If you notice that
TIRE TRACTION
tors appear when the tread depth is 1.6
tires are wearing unevenly between
Tire traction can be reduced if you
mm (0.06 in.). The tire should be re-
rotations, have the car checked by a
drive on worn tires, tires that are im-
placed when these appear as a solid bar
Hyundai dealer so the cause may be
properly inflated or on slippery road
across two or more grooves of the
corrected. After rotating, adjust the tire
surfaces. Tires should be replaced
tread. Always replace your tires with
pressures and be sure to check wheel
when tread wear indicators appear. To
those of the recommended size. If you
nut tightness.
reduce the possibility of losing control,
change wheels, the new wheel's rim
slow down whenever there is rain,
width and offset must meet Hyundai
snow or ice on the road.
specification.
!
WARNING:
o Do not use the temporary spare
tire for tire rotation.
o Do not mix bias-ply and radial-
ply tires under any circum-
stances. This may cause danger-
ous handling characteristics.
8- 6 CONSUMER INFORMATION
I100A01TB-GAT
o The ABS works by comparing the
SPARE TIRE AND TOOLS
!
WARNING:
speed of the wheels. Tire size can
o Driving on worn-out tires is dan-
affect wheel speed. When replac-
gerous! Worn-out tires can cause
ing tires, all 4 tires must use the
loss of braking effectiveness,
same size originally supplied with
steering control and traction.
the vehicle. Using tires of a different
When replacing tires, never mix
size can cause the ABS (Anti-lock
radial and bias-ply tires on the
Brake System) and ESP(Electronic
same car. If you replace radial
Stability Program) to work irregu-
tires with bias-ply tires, they must
larly.
be installed in sets of four.
o Using tires and wheels of other
than the recommended sizes may
HTB224
cause unusual handling charac-
Your Hyundai is delivered with the fol-
teristics that may cause death,
lowing:
serious injury or property dam-
age.
Spare tire and wheel
o Tires degrade over time, even when
Wheel nut wrench,
they are not being used. Regard-
Wrench bar,
less of the remaining tread, it is
Screw driver,
recommended that tires generally
Jack,
be replaced after six (6) years of
Towing hook
normal service. Heat caused by
hot climates or frequent high load-
ing conditions can accelerate the
aging process. Failure to follow
this warning can result in sudden
tire failure, which could lead to a
loss of control and an accident
involving serious injury or death.
9. VEHICLE SPECIFICATIONS
Measurement
9-2
Engine
9-3
Lubrication chart
9-4
9
9- 2 VEHICLE SPECIFICATIONS
J010A02TB-GAT
J030A02TB-GAT
MEASUREMENT
TIRE
mm (in.)
Overall length
3,825 (150.6)
Option
165/65R14, 175/65R14, 185/55R15
Overall width
1,665(65.6)
Overall height
GEN
1,495(58.9)
(unladen)
EC
1,490(58.7)
J035A01TB-GAT
SPARE TIRE
Wheel base
2,455(96.7)
Standard
T105/70D14(Temporary)
Wheel tread
Front
1,450(57.1)
Option
Full size
Rear
1,440(56.7)
J020A01TB-GAT
J050A01FC-GAT
POWER STEERING
BRAKE
Type
Rack and pinion
Type
Dual hydraulic with brake booster
Wheel free play
0 ~ 30 mm (0 ~ 1.18 in.)
Front brake type
Ventilated disc
Rack stroke
Manual
140 mm (5.5 in.)
Rear brake type
Drum
Power
132 mm (5.20 in.)
Parking brake
Cable
Oil pump type
Vane type
J060A01TB-GAT
FUEL SYSTEM
Fuel tank
Liter
Imp.gal
Capacity
45
9.9
Capacity (Iceland only)
40
8.8
VEHICLE SPECIFICATIONS
9- 3
J070A03TB-GAT
ENGINE
GASOLINE
DIESEL
ITEMS
1.1 L
1.4 L
1.6 L
1.5L
Engine Type
4-Cylinder in -line SOHC
4-Cylinder in -line DOHC
4-Cylinder in -line DOHC
Bore x Stroke
67 x 77
75.5 x 78.1
76.5 x 87
75 x 84,5
Displacement (cc)
1,086
1,399
1,599
1,493
Firing order/Injection order
1-3-4-2
1-3-4-2
Valve clearance
Intake
0.13 mm
-
-
-
(Cold Engine 20 ± 5°C)
Exhaust
0.17 mm
-
-
-
Idle speed (RPM)
850 ± 100
700 ± 100
-
Ignition timing (Base)/Injection timing
BTDC 3° ± 5°
BTDC 5° ± 5°
Auto control
9- 4 VEHICLE SPECIFICATIONS
J080A06TB-GAT
LUBRICATION CHART
Item
Oil & Grease Standard
Quantity (liter) (Imp.qts.)
Engine Oil
Gaso-
API service
SAE 5W-20 (5W-30)
Drain and refill (with oil filter)
line
SM*1 or above,
SAE 10W-30 (ABOVE -18°C)
1.1L : 3.0 liter (2.6 Imp.qts.)
ILSAC GF-4
SAE 15W-40 (ABOVE -13°C)
1.4L/1.6L : 3.3 liter (2.9 Imp.qts.)
or above
SAE 20W-50 (ABOVE -7°C)
API CH4
SAE 30 (0°C ~ 40°C)
Drain and refill (with oil filter)
Diesel
or above,
SAE 20W-40 (ABOVE -10°C)
:
5.3 liter (4.2 Imp.qts.)
ACEA B4
SAE 15W-40 (ABOVE -15°C)
or above
SAE 10W-30 (-20°C ~ 40°C)
Recommends
SAE 5W-30 (-25°C ~ 40°C)
SAE 0W-30 (BELOW 10°C) *2, *3
*2. Restricted to driving condition and dealing area
*3. Not recommended for sustained high speed vehicle operation
Engine Oil Consumption
Normal driving condition
MAX. 1L / 1,500 Km
Severe driving condition
MAX. 1L / 1,000 Km
Transaxle
Manual
HYUNDAI GENUINE PARTS MTF 75W/85 (API GL-4)
Gasoline : 2.15 liter (1.86 Imp.qts.)
Diesel : 2.0 liter (1.75 Imp.qts.)
Auto
HYUNDAI GENUINE ATF SP-III, DIAMOND ATF SP-III,
6.1 liter (5.3 Imp.qts)
SK ATF SP-III or other brands approved by Hyundai Motor Co.,
(Gasoline only)
Power Steering
PSF-3
As required
Brake Fluid
DOT 3, DOT 4 or equivalent
As required
Gasoline : 5.5 liter (4.8 Imp.qts.)
Coolant
Ethylene glycol base for aluminum radiator
Diesel: 5.7 liter (5.0 Imp.qts.)
*1 : If the API service SM engine oil is not available in your country, you are able to use API service SL.