Hyundai Creta (2016 year). Instruction - part 29

 

  Index      Hyundai     Hyundai Creta - instruction 2016 year in english

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  27  28  29 

 

 

 

Hyundai Creta (2016 year). Instruction - part 29

 

 

rECommENDED lubrICaNtS aND CapaCItIES
To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality.
The correct lubricants also help promote engine efficiency that results in improved fuel economy.
These lubricants and fluids are recommended for use in your vehicle.
Lubricant
Volume
Classification
Engine oil *1 *2 (drain and refill)
Gamma 1.6
3.6 l (3.8 US qt.)
ACEA A5*3 (or above)
Recommends
U2 1.4/U2 1.6
5.3 l (5.6 US qt.)
ACEA B4*4
1.6~1.7 l
Gamma 1.6
HK MTF 70W (SK)
(1.7~1.8 US qt.)
SPIRAX S6 GHME 70W (H.K.SHELL)
Manual transaxle fluid
GS MTF HD 70W (GS CALTEX)
1.7~1.9 l
U2 1.4/U2 1.6
(HYUNDAI genuine transaxle fluid)
(1.9~2.0 US qt.)
MICHANG ATF SP-IV,
Gamma 1.6
7.3 l (7.71 US qt.)
SK ATF SP-IV,
Automatic transaxle fluid
NOCA ATF SP-IV,
U2 1.6
7.1 l (7.5 US qt.)
HYUNDAI genuine ATF SP-IV
M/T
5.7 l (6.0 US qt.)
Gamma 1.6
A/T
5.5 l (5.8 US qt.)
Mixture of antifreeze and water
8
Coolant
U2 1.4
M/T
7.2 l (7.6 US qt.)
(Phosphate-based Ethylene glycol coolant for
aluminum radiator)
M/T
7.2 l (7.6 US qt.)
U2 1.6
A/T
7.0 l (7.4 US qt.)
M/T : Manual transaxle
A/T : Automatic transaxle
8-5
Specifications & Consumer information
Lubricant
Volume
Classification
0.7~0.8 l
Brake/Clutch fluid
FMVSS116 DOT-3 or DOT-4
(0.74~0.85 US qt.)
Fuel
55 l (58.12 US qt.)
-
*1 : Refer to the recommended SAE viscosity numbers on the next page.
*2 : Engine oils labeled Energy Conserving Oil are now available. Along with other additional benefits, they contribute to fuel econ-
omy by reducing the amount of fuel necessary to overcome engine friction. Often, these improvements are difficult to measure
in everyday driving, but in a year’s time, they can offer significant cost and energy savings.
*3 : If the ACEA A5 engine oil is not available in your country, you are able to use API SM & ILSAC GF-4 or above (Except Middle
East).
*4 : If the ACEA B4 engine oil is not available in your country, you are able to use API CH-4 or above.
8-6
Recommended SAE viscosity
When choosing an oil, consider the
Proceed to select the recommended
number
range of temperature your vehicle
oil viscosity from the chart.
will be operated in before the next oil
change.
CAUTION
Temperature Range for SAE Viscosity Numbers
Always be sure to clean the area
°C
-30
-20
-10
0
10
20
30
40
50
around any filler plug, drain plug,
Temperature
(°F)
-10
0
20
40
60
80
100
120
or dipstick before checking or
draining any lubricant. This is
20W-50
especially important in dusty or
Except
15W-40
sandy areas and when the vehicle
Middle
10W-30
is used on unpaved roads.
East
Gasoline
5W-20*2, 5W-30
Cleaning the plug and dipstick
Engine
areas will prevent dirt and grit from
20W-50
Oil *1
entering the engine and other
For
15W-40
mechanisms that could be dam-
Middle
10W-30
aged.
East
5W-30, 5W-40
Engine oil viscosity (thickness) has
15W-40
an effect on fuel economy and cold
Diesel
10W-30
weather operating (engine start and
Engine Oil
5W-30
engine oil flowability). Lower viscosi-
ty engine oils can provide better fuel
0W-30
economy and cold weather perform-
8
ance, however, higher viscosity
*1 : For better fuel economy, it is recommended to use the engine oil of a viscosity grade SAE 5W-
engine oils are required for satisfac-
20 (Except Middle East) or 5W-30 (For Middle East). However, if the engine oil is not available in
your country, select the proper engine oil using the engine oil viscosity chart.
tory lubrication in hot weather. Using
*2 : For middle East, do not use engine oil of viscosity grade SAE 5W-20.
oils of any viscosity other than those
recommended could result in engine
damage.
8-7
Specifications & Consumer information
VEhIClE IDENtIfICatIoN NumbEr (VIN)
VEhIClE CErtIfICatIoN
Type A
Type B
labEl (If EquIppED)
■ Right Hand Drive
OGS085002
OGS085010L
OGS085003
■ Left Hand Drive
The vehicle identification number
The VIN is also on a plate attached
(VIN) is the number used in register-
to the top of the dashboard.
ing your car and in all legal matters
The number on the plate can easily
pertaining to its ownership, etc.
be seen through the windshield from
The number is punched on the floor
outside.
under the front right seat. To check
the number, pull out the slit part of
carpet.
OGS085004L
The vehicle certification label
attached on the driver’s (or front pas-
senger’s) side center pillar gives the
vehicle identification number (VIN).
8-8
tIrE SpECIfICatIoN aND
ENGINE NumbEr
prESSurE labEl
■ Gamma 1.6 MPI
■ U2 1.6 TCI
■ Right Hand Drive
OGS085004
■ Left Hand Drive
■ U2 1.4 TCI
OGS085008/OGS085007/OGS085001
The engine number is stamped on
the engine block as shown in the
drawing.
OGS085009L
The tires supplied on your new vehi-
8
cle are chosen to provide the best
performance for normal driving.
The tire label located on the driver's
side (or front passenger’s side) cen-
ter pillar gives the tire pressures rec-
ommended for your car.
8-9
Specifications & Consumer information
aIr CoNDItIoNEr ComprESSor labEl
OHC081001
A compressor label informs you the
type of compressor your vehicle is
equipped with such as model, suppli-
er part number, production number,
refrigerant (1) and refrigerant oil (2).
8-10

 

 

 

 

 

 

 

Content   ..  27  28  29