|
|
Clamp only on the mounting flange of the inner axle shaft housing. Fig. 48: Installing New Axle Shaft Seal Using J 45225 & J8092 2. Install the new axle shaft seal using the J 45225 (1) and the J 8092 (2). See Special Tools and Equipment . 3. Install the inner axle shaft into the inner axle shaft housing. Carefully tap the inner axle shaft into place with a soft-faced mallet. 4. Install the inner axle shaft and housing assembly to the differential carrier case assembly. Refer to Inner Shaft and/or Housing Replacement - Front Drive Axle .
2004 Hummer H2 2004 DRIVELINE/AXLE Front Drive Axle - Hummer H2
|