|
|
Content .. 1415 1416 1417 1418 ..
z The control module turns OFF the MIL after 3 consecutive ignition cycles that the diagnostic runs and z A current DTC Last Test Failed clears when the diagnostic runs and passes. z Use a scan tool in order to clear the MIL and the DTC. Non-Emissions Related DTCs Action Taken When the DTC Sets - Type C z The control module stores the DTC information into memory when the diagnostic runs and fails. z The MIL will not illuminate. z The driver information center, if equipped, may display a message. Conditions for Clearing the DTC - Type C z A last test failed, or current DTC, clears when the diagnostic runs and passes. z Use a scan tool in order to clear the DTC. Conditions for Clearing the DTC - Type X This DTC is available in the PCM software, but has been disabled, or turned OFF. In this case, the diagnostic DIAGNOSTIC TROUBLE CODE (DTC) TYPE(S) Diagnostic Trouble Code (DTC) Type(s) DTC United States Canada Unleaded Export P0068 A A P0101 B B P0102 B B P0103 B B P0106 B B P0107 B B P0108 B B P0112 B B P0113 B B P0116 B B P0117 B B P0118 B B P0120 A A P0125 B B
2004 Hummer H2 2004 ENGINE PERFORMANCE Engine Controls (Introduction) - 4.8L, 5.3L, and 6.0L - Hummer H2
|