Content .. 23 24 25 26 ..

Honda Pilot (2022 year). Manual in english - page 25

397

Customized Features

Continued

Features

*1:Default Setting

Setup

Group

Customizable Features

Description

Selectable Settings

Vehicle

Meter Setup

Turn by Turn Display

Selects whether the turn-by-turn display comes on
during the route guidance.

OFF

Fuel Efficiency
Backlight

Turns the ambient meter feature on and off.

OFF

Power
Tailgate
Setup

Power Tailgate
Keyless Open Mode

Changes the keyless setting for when the power
tailgate opens.

Anytime

When

Unlocked

Power Tailgate Open
by Outer Handle

Changes the setting to open power tailgate by
tailgate outer handle.

Off (Manual only)

On (Power/
Manual)

Hands Free Access
Power Tailgate

Changes the setting to open power tailgate by a
swift forward in and out kicking motion under the
rear bumper.

OFF

Keyless Access
Setup

Door Unlock Mode

Changes which doors unlock when you grab the
driver’s door handle.

Driver Door or
Tailgate

All Doors

Keyless Access Light
Flash

Causes some exterior lights to flash when you
unlock/lock the doors.

OFF

Keyless Access Beep

Causes the beeper to sound when you unlock/lock
the doors.

OFF

* Not available on all models

398

Customized Features

Features

*1:Default Setting

Setup

Group

Customizable Features

Description

Selectable Settings

Vehicle

Keyless Access
Setup

Remote Start System
On/Off

Turns the remote engine start feature on and off.

OFF

Walk Away Auto
Lock

Changes the settings for the automatic locking the
doors when you walk away from the vehicle while
carrying the remote.

Enable

Disable

Driver Assist
System Setup

Forward Collision
Warning Distance

Changes at which distance CMBS

alerts.

Long

Normal

Short

ACC Forward Vehicle
Detect Beep

Causes the system to beep when the system
detects a vehicle, or when the vehicle goes out of
the ACC range.

OFF

Road Departure
Mitigation Setting

Changes the setting for the road departure
mitigation system.

Normal

Wide

Warning Only

Lane Keeping Assist
Suspend Beep

Causes the system to beep when the LKAS is
suspended.

OFF

Blind Spot
Information

Changes the setting for the blind spot information.

Audible and Visual
Alert

Visual Alert

OFF

* Not available on all models

399

Customized Features

Continued

Features

*1:Default Setting

Setup

Group

Customizable Features

Description

Selectable Settings

Vehicle

Door Setup

Auto Door Lock

Changes the setting for the automatic locking
feature.

With Vehicle
Speed

Shift from

OFF

Auto Door Unlock

Changes the setting for when the doors unlock
automatically.

All Doors with
Driver’s Door
Opens

All Doors

with Shift to P

All

Doors with IGN Off

OFF

Key and Remote
Unlock Mode

Sets up either the driver’s door or all doors to
unlock on the first push of the remote or built-in
key.

Driver Door

All

Doors

Keyless Lock Answer
Back

LOCK/UNLOCK- The exterior lights flash.
LOCK (2nd push)- The beeper sounds.

OFF

Security Relock Timer

Changes the time it takes for the doors to relock
and the security system to set after you unlock the
vehicle without opening any door.

90 sec

60 sec

sec

400

Customized Features

Features

*1:Default Setting

Setup

Group

Customizable Features

Description

Selectable Settings

Vehicle

Lighting
Setup

Interior Light
Dimming Time

Changes the length of time the interior lights stay
on after you close the doors.

60 sec

30 sec

sec

Headlight Auto Off
Timer

Changes the length of time the exterior lights stay
on after you close the driver’s door.

60 sec

30 sec

sec

0 sec

Auto Interior
Illumination
Sensitivity

Changes the sensitivity of the brightness of the
instrument panel when the headlight switch is in
the

AUTO

position.

Min

Low

Mid

High

Max

Auto Headlight On
with Wiper On

Changes the settings for the wiper operation when
the headlights automatically come on while the
headlight switch is in the

AUTO

position.

OFF

Auto Light
Sensitivity

Changes the timing for the headlights to come on.

Max

High

Mid

Low

Min

Wireless
Charger

Turns the wireless charger feature on and off.

OFF

Maintenance
Information

Oil Life

Resets the engine oil life display when you have
performed the maintenance service.

—

* Not available on all models

401

Customized Features

Continued

Features

*1:Default Setting

Setup

Group

Customizable Features

Description

Selectable Settings

Camera

Rear Camera

Default Camera View

Changes the camera view mode when the rear
camera monitor is turned on.

Multi-View Rear Camera

P. 551

Last Used

Normal

View

Wide View

Guidelines

Selects whether the guidelines come on the rear
camera monitor.

Multi-View Rear Camera

P. 551

Dynamic

Fixed

Both

OFF

Cross Traffic
Monitor

Turns the cross traffic monitor on and off.

OFF

LaneWatch

Show with Turn
Signal

Selects whether the LaneWatch display comes on
when you move the turn signal lever to indicate a
right turn.

OFF

Show Reference Line

Selects whether the reference lines come on the
LaneWatch monitor.

OFF

Display

Brightness

Adjusts the settings of the audio/information
screen.

Display Setup

P. 259

Contrast

Black Level

* Not available on all models

402

Customized Features

Features

Setup

Group

Customizable Features

Description

Selectable Settings

Sound

Bass / Treble

Adjusts the settings of the audio speakers’ sound.

Adjusting the Sound

P. 258

Center /
Subwoofer
Volume

Subwoofer
Volume

Balance / Fader

Audio Zones

Speed Volume
Compensation

DTS Neural
Surround

Notifications

Changes the notification settings for apps.

—

* Not available on all models

403

Customized Features

Defaulting All the Settings

Features

Defaulting All the Settings

Reset all the menu and customized settings as the factory defaults.

Select .

Select

Settings

Select

System

Select

Factory Data Reset

A confirmation message appears on the
screen.

Select

Continue

to reset the settings.

Select

Continue

again to reset the settings.

The system will reboot.

Defaulting All the Settings

When you transfer the vehicle to a third party, reset
all settings to default and delete all personal data.

If you perform

Factory Data Reset

, it will reset the

preinstalled apps to their factory default.

If you perform

Factory Data Reset

, you cannot use

the HondaLink

because it becomes off line.

HondaLink

P. 294

404

Features

HomeLink

Universal Transceiver

The HomeLink

Universal Transceiver can be programmed to operate up to three

remote controlled devices around your home, such as garage doors, lighting, or
home security systems.

Refer to the safety information that came with your garage door opener to test that
the safety features are functioning properly. If you do not have the safety
information, contact the manufacturer.

Before programming HomeLink, make sure that people and objects are out of the
way of the garage or gate to prevent potential injury or damage.

When programming a garage door opener, park just outside the garage door’s path.

■

Important Safety Precautions

HomeLink

Universal Transceiver

Before programming HomeLink to operate a garage
door opener, confirm that the opener has an external
entrapment protection system, such as an “electronic
eye,” or other safety and reverse stop features. If it
does not, HomeLink may not be able to operate it.

NOTE:
Some LED lightbulbs installed in the garage door
opener can interfere with the training and consistent
operation of your HomeLink device. Please consider
use of Low RF interference bulbs in your garage door
opener.

* Not available on all models

405

HomeLink

Universal Transceiver

Training HomeLink

Continued

Features

Training HomeLink

If it is necessary to erase a previously entered
learned code:

•

Press and hold the I and III HomeLink
buttons for about 10 seconds, until the
orange indicator blinks. Release the
buttons, and proceed to step 1.

•

If you are training the second or third
button, go directly to step 1.

The instructions on the next page should work for most gate or garage openers, but
may not work for all. For detailed instructions about your specific remote opener,
visit

http://www.homelink.com

or call (800) 355-3515.

III HomeLink
Button

Indicator

I HomeLink
Button

HomeLink

Universal Transceiver

Training HomeLink

406

Features

■

Programming a Button

Training HomeLink

Reprogramming a Button
If you want to retrain a programmed button for a new
device, you do not have to erase all button memory. You
can replace the existing memory code using this
procedure:

Erasing Button Memory
To erase programming from the buttons, press and hold
the two outside HomeLink buttons until the HomeLink
indicator changes from

orange to rapidly flashing green

This should take about 10 seconds. You should erase all
programming before selling the vehicle.

Operating
To operate, simply press and release the programmed
HomeLink button. Activation will now occur for the
trained device.

Questions
For questions or comments, visit

www.HomeLink.com

www.youtube.com/HomeLinkGentex

, or by calling the

HomeLink Hotline (North America only) at (800) 355-
3515.

HomeLink

is a registered trademark of Gentex

Corporation.

Press and hold the desired HomeLink button until
the HomeLink indicator begins to

slowly flash

orange

. This should take about 20 seconds.

Release the HomeLink button and position the
remote transmitter you wish to link 1 - 3 inches (3 -
8 cm) from the HomeLink button you want to
program, then follow steps 3 - 6 under
“programming a button.”

Training
Complete

HomeLink LED is

continuously on green

YES

Position the remote transmitter you wish to link 1 to 3 inches (3 - 8 cm) from the
HomeLink

button you want to program.

3b.

Canadian Garage Door Opener

A. Press and release the HomeLink
button. Press, hold and release the
button on the remote every 2 secs.
Does the HomeLink indicator (LED)
change from

slowly flashing orange to

rapidly flashing or continuously on
green

? The process should take less

than 60 seconds.

Press and hold the desired HomeLink button. Is the HomeLink indicator (LED)

slowly

flashing orange

3a.

Hold the button on the remote
transmitter. Does HomeLink indicator
(LED) change from

slowly flashing

orange to rapidly flashing green or
continuously on green

? The process

should take less than 60 seconds.

Press and hold the HomeLink button again.

HomeLink indicator

rapidly flashes

green

5a.

The remote has a rolling code. Press the
“learn” button on the remote-controlled
device (e.g. garage door opener).

Press and hold the HomeLink button
again.
The remote-controlled device should
operate.

Training Complete

5b.

Within 30 secs, press and hold the
programmed HomeLink button for 2
secs.

Press and hold the programmed HomeLink
button for about a second. Does the device
(garage door opener) work?

407

Continued

Features

Bluetooth

HandsFreeLink

Bluetooth

HandsFreeLink

(HFL) allows you to place and receive phone calls using

your vehicle’s audio system, without handling your cell phone.

Using HFL

■

HFL Buttons

Bluetooth

HandsFreeLink

Place your phone where you can get good reception.

To use HFL, you need a

Bluetooth

-compatible cell

phone. For a list of compatible phones, pairing
procedures, and special feature capabilities,

•

U.S.: Visit

automobiles.honda.com/handsfreelink/

or call 1-888-528-7876.

•

Canada: For more information on smartphone
compatibility, call 1-855-490-7351.

To use the system, the

Bluetooth

setting must be

Phone Setup

P. 412

Voice control tips

•

Aim the vents away from the ceiling and close the
windows, as noise coming from them may interfere
with the microphones.

•

Press the

button when you want to call a

number using a phonebook name or a number.
Speak clearly and naturally after a beep.

•

If the microphones pick up voices other than yours,
the command may be misinterpreted.

•

To change the volume level, select the audio
system’s

VOL

(Volume) or use the remote audio

controls on the steering wheel.

If there is no speed dial entry in the system, the pop-
up notification appears on the screen.

Favorite Contacts

P. 417

If there is no call history, the call history is disabled.

(Talk) Button

Volume up

Microphone

(Hang-up) Button

(Pick-up) Button

Volume down

ENTER

Button

(Back) Button

Buttons

3 4

(Home) Button

Bluetooth

HandsFreeLink

Using HFL

408

Features

(Pick-up) button:

Press to go directly to the phone screen of the driver

information interface, or to answer an incoming call.

(Hang-up) button:

Press to end a call.

(Back) button:

Press to go back to the previous screen, or cancel a command.

(Talk) button:

Press to access Voice Portal.

buttons:

Press to select an item displayed on the phone screen

of the driver information interface.

ENTER button:

Press to call a number listed in the selected item on the phone

screen of the driver information interface.

(Home) button:

Press to go back to the home screen of the driver information

interface.

To go to the phone screen of the driver information interface:

Press the

(home) button on the steering wheel.

Select

Phone

You can select

Favorite Contacts

Recent Calls

Bluetooth

HandsFreeLink

Bluetooth

Wireless Technology

The

Bluetooth

word mark and logos are registered

trademarks owned by

Bluetooth

SIG, Inc., and any

use of such marks by Honda Motor Co., Ltd., is under
license. Other trademarks and trade names are those
of their respective owners.

HFL Limitations
An incoming call on HFL will interrupt the audio
system when it is playing. It will resume when the call
is ended.

3 4

409

Bluetooth

HandsFreeLink

Using HFL

Features

The audio/information screen notifies you when there is an incoming call.

Certain manual functions are disabled or inoperable while the vehicle is in motion.
You cannot select a grayed-out option until the vehicle is stopped.

Only previously stored phonebook names or numbers can be called using voice
commands while the vehicle is in motion.

Favorite Contacts

P. 417

■

HFL Status Display

HFL Status Display

The information that appears on the audio/
information screen varies between phone models.

■

Limitations for Manual Operation

Bluetooth

Indicator

Appears when your phone is
connected to HFL.

Signal Strength

HFL Mode

Battery Level Status

Caller’s Name
Caller’s Number

410

Bluetooth

HandsFreeLink

HFL Menus

Features

HFL Menus

The power mode must be in ACCESSORY or ON to use the system.

■

Phone settings screen

Select .

Select

Phone

Select

Settings

HFL Menus

To use HFL, you must first pair your

Bluetooth

compatible cell phone to the system while the vehicle
is parked.

Some functions are limited while driving.

Change Connected Phone

(Existing entry list)

+ Connect New Device

Pair a new phone to the system.

Connect, disconnect, or delete a paired device.

Ringtone

Select the ring tone.

Auto Sync Phone

Set phonebook and call history data to be automatically imported when a phone is paired to HFL.

Turn HondaLink

Assist on and off.

HondaLink Assist

Auto Phone Call Transfer

Set calls to automatically transfer from your phone to HFL when you enter the vehicle.

411

Bluetooth

HandsFreeLink

HFL Menus

Continued

Features

■

Phone menu screen

Select .

Select

Phone

Display the last outgoing, incoming and missed calls.

Recent Calls

Favorite Contacts

All

Dialed

Received

Display the last outgoing calls.

Display the last incoming calls.

Missed

Display the last missed calls.

Keypad

Enter a phone number to dial.

(Existing entry list)

Dial the selected number in the speed dial list.

Contacts

Display the paired phone’s phonebook.

412

Bluetooth

HandsFreeLink

HFL Menus

Features

■

Bluetooth

setup

You can turn

Bluetooth

function on and off.

Select .

Select

Settings

Select

Connections

Select

Bluetooth

Select

Options

Select

Bluetooth

, then

■

Phone Setup

Content .. 23 24 25 26 ..