341

7.Intermediate Instrument Panel Removal/Installation

(1) Disconnect the negative (--) terminal cable from the battery.

(2) Remove intermediate instrument panel.

(3) Remove the screw.

(4) Using the flat screwdriver wrapped with vinyl tape, disconnect

the clip.

(5) Pull the intermediate instrument panel forward and then remove

the clip.

(6) Remove LDC (Liquid Crystal Display) component connector.

(7) The installation is in the reverse order of the removal.

8.Glove Compartment Removal/Installation

(1) Open the glove compartment;

(2) Pull the glove compartment up and separate it from the instrument panel;

(3) The installation is in the reverse order of the removal.

342

9. Auxiliary Console Removal/Installation

(1) For MT vehicle, remove transmission control knob.

(2) Using the screwdriver wrapped with the vinyl tape,

remove the tray.

(3) Using the screwdriver wrapped with the vinyl tape,

remove shift boot frame. Disconnect ignition switch.

(4) Remove the bolt, screw.

(5) The installation is in the reverse order of the removal.

10.The auxiliary Console Removal/Installation

(1)  Remove in the order listed below.

(2)  The installation is in the reverse order of the removal.

1

1 

 

2 

3 

4 

5 

6 

7 

8 

9 

10 

11 

12

1

Auxiliary console left front end

2

Shift boot frame

3

Shift boot end shield

4

T r a y

5

Auxiliary console front part

6

Auxiliary console outer end shield upper plate

7

Auxiliary console outer end shield

8

Auxiliary console inner end shield

9

Auxiliary console compartment

10

Auxiliary console rear end shield

11

Rear ash tray

12

Auxiliary console rear part

343

(IX) A pillar inside trim and front door sill

A pillar inside trim and front door sill diagram

A pillar inside trim and front door sill diagram

1. Right A Pillar Inside Trim

2. Left A 

Pillar Inside Trim            3. Right Front Door Sill

4.  Left Front Door Sill5.D-Clip 6. Steel Clip

7. Cross Slot Head Self-tapping Screw

1. Removal

1

Remove the installed right front door sill, left front door sill self-tapping screw cross screwdriver;

2

Use an opener to remove the right A pillar inside trim, A pillar inside trim, right front door sill, left front

door sill.

2. Installation

1

 Install the right A pillar inside trim, A pillar inside trim, right front door sill , left front door sill to the

corresponding position with clip and steel clip;

2

Fix the right front door sill , left front door sill with a tapping screw.

 

 1

2 

3 

 

 

 6

4

5

7

344

(X) B pillar inside trim

B pillar inside trim diagram:

B Pillar Inside Trim Diagram

1. Right B Pillar Upper Inside Trim

2. Left B Pillar Upper Inside Trim

3. Right Deflector

4. Left Deflector

5. Right B Pillar Lower Inside Trim

6. Left B Pillar Lower Inside Trim

7. Right B Pillar Lower Inside Trim Sound Insulator 8.  Left B Pillar Lower Inside Trim Sound Insulator

9. Cross Pan Head Tapping Screw

10. Steel Clip

1.Removal

1

Remove the installed left B pillar lower inside trim, right B pillar lower inside trim tapping screw with a

cross screwdriver;

2

Remove the left B pillar lower inside trim, right B pillar lower inside trim with a opener ;

3

Remove the seat belt swing ring;

4

Remove the right B pillar upper inside trim, leftB pillar upper inside trim tapping screw with the cross

screwdriver;

5

Remove the right B pillar upper inside trim, leftB pillar upper inside trim with a opener.

2.Installation

1

Clip B pillar inside trim to the corresponding position with clip and steel clip in order;

2

Fix the upper inside trim and lower inside trim to the vehicle body with a tapping screw.

 

 

 

 

2 

4

5

3

1

6

10

8

7

9