FE02-0191b

22. Remove the cylinder head bolts.

Note

Due  to  confined  space,  cylinder  head  bolts  and
gasket bolts can not be removed together.

FE02-0192b

23. Remove  the  cylinder  head  bolt  gasket  with  a  magnetic

stick.

FE02-0193b

24. Remove the cylinder head gasket.

Engine

Engine Mechanical System JL4G18-D

2-387

Installation Procedure:

FE02-0194b

1.

Clean the surface of the cylinder head and cylinder head.

FE02-0195b

2.

Install the cylinder head gasket.

Note

Cylinder head gasket is a single used item and must
be replaced with a new part.

FE02-0196b

3.

Install the cylinder head assembly.

2-388

Engine Mechanical System JL4G18-D

Engine

FE02-0197b

4.

Install the cylinder head gasket bolt washers.

9

4

2

6

8

7

5

1

3

10

FE02-0198b

5.

Install and tighten the cylinder head bolts, according to the
sequence in the graphic.

Torque:
First Pass: 49 Nm (Metric) 36.3 lb-ft (US English)
Second Pass: 80 Nm (Metric) 59.1 lb-ft (US English)

FE02-0199b

6.

Install  the  small  cycle  pipes  to  cylinder  head  retaining
bolts.

Engine

Engine Mechanical System JL4G18-D

2-389

FE02-0200b

7.

Install the heater inlet and outlet pipes.

FE02-0201b

8.

Install the radiator inlet and outlet pipes.

FE02-0202b

9.

Install the camshaft.

2-390

Engine Mechanical System JL4G18-D

Engine