FE02-0098b

8.

Remove throttle body preheated water outlet pipe.

Warning!

When the engine temperature is high, prevent the
engine coolant spray, causing burns in the removal
procedure.

FE02-0104b

9.

Remove  throttle  body  retaining  nut  from  the  intake
manifold.

FE02-0101b

10. Remove throttle body bracket bolts.

Engine

Engine Mechanical System JL4G18-D

2-339

FE02-0102b

11. Remove  the  throttle  body  assembly  from  the  intake

manifold and complete the removal procedure.

Installation Procedure:

FE02-0103b

1.

Clean  the  engine  throttle  body  and  the  engine  intake
manifold mating surface and replace the seals.

FE02-0104b

2.

Install the throttle body to the intake manifold and tighten
the retaining nut.

2-340

Engine Mechanical System JL4G18-D

Engine

FE02-0105b

3.

Install throttle body bracket and tighten the bolts.

FE02-0106b

4.

Install the throttle preheated water inlet pipe.

FE02-0107b

5.

Install the throttle preheated water outlet pipe.

Engine

Engine Mechanical System JL4G18-D

2-341

FE02-0109b    

6.

Install the crankcase ventilation hose.

FE02-0110b

7.

Connect  the  throttle  position  sensor  wiring  harness
connector.

FE02-0111b

8.

Connect  the  idle  speed  control  valve  wiring  harness
connector.

2-342

Engine Mechanical System JL4G18-D

Engine