Anti-stealing and door lock--Electric door lock control system

 357 

Power supply (+)

Power supply (+)

Power supply

(+)

1G2 in

Power supply

(+)

1G2 out

Power supply (-)

Power supply (+)

Power supply (+)

Power supply (+) Power supply (+)

Power supply

(+)

Power supply

(+)

Power supply

(-)

Power supply

(+)

Power supply (+)

Power supply (+)

Grounding wire

Sunroof

Rain wiper

Brake light

Anti-steal

Power supply

(+)

Instrument

Rear fog light

Anti-stealing and door lock--Electric door lock control system

Malfunction phenomenon

“Door locker control system” does not work

(all).

Door locking/unlocking malfunction (use

handle operation and key operation)

Door locking/unlocking malfunction (use

key)

Malfunction of key keeping protection func-

tion

Only one door locker does not work

Possible malfunction part

1. DOOR fuse (panel J/B)

2. Wiring harness

1. Electric window main switch (door control switch)

2. Wiring harness

1. Door at the side of driver assembly (door control switch)

2. Wiring harness

3. Door locker connecting rod is loosen

1. Anti-versa lock supervising switch

2. Door control light switch

3. Wiring harness

1. Door locker electric motor

2. Wiring harness

Referred page

-

-

359

-

359

-

-

359

-

-

359

-

Malfunction phenomenon table

 358 

Anti-stealing and door lock--Electric door lock control system

Inspection

1. Check driver sear door locker assembly.

(a) Liking that shown in figure, check the conduction of every

terminal of door key switch.

If the conduction does not accord with the regulation, change

the switch.

(b) Liking that shown in figure, supply battery voltage to terminal,

and check the function of door locker.

If the function does not accord with the regulation, change

the door locker assembly.

Open

Close

Open

Close

 359 

Position of switch

Terminal connected by avometer

Regulated situation

LOCK

2-4

Conduction

OFF

-

Not conduction

UNLOCK

1-2-3

Conduction

Condition

Function

Supply battery anode to No. 6 terminal, cathode to No.5 terminal

Open

Supply battery anode to No. 5 terminal, cathode to No.6 terminal

Close

Anti-stealing and door lock--Electric door lock control system

2. Check front passenger seat door locker assembly

Liking that shown in figure, supply battery voltage to terminal,

and check the function of door locker.

If the function does not accord with the regulation, change the

door locker assembly.

3. Check the left rear and right rear door locker assembly.

Liking that shown in figure, supply battery voltage to terminal,

and check the function of door locker.

If the function does not accord with the regulation, change the

door locker assembly.

Open

Close

Open

Close

 360 

Condition

Function

Supply battery anode to No. 6 terminal, cathode to No.5 terminal

Open

Supply battery anode to No. 5 terminal, cathode to No.6 terminal

Close

Condition

Function

Supply battery anode to No. 6 terminal, cathode to No.5 terminal

Open

Supply battery anode to No. 5 terminal, cathode to No.6 terminal

Close