Ford Fusion (2018 year). Manual - part 26

Airbag

Action

Message

The system detects a malfunction due to a blocked sensor.

Remove blockage.

Occupant Sensor

BLOCKED Remove

Objects Near Passenger

Seat

Alarm

Action

Message

Alarm triggered due to unauthorized entry.  See Anti-Theft

Alarm (page 69).

Vehicle Alarm To Stop

Alarm, Start Vehicle.

Auto Start-Stop

Action

Message

The engine needs to be restarted, press the brake pedal to

start.

Auto StartStop Press
Brake to Start Engine

The engine needs to be restarted, press the brake pedal harder

to start.

Auto StartStop Press

Brake Harder to Activate

The engine needs to be restarted, press any pedal to start.

Auto StartStop Press a

Pedal to Start Engine

Select park for the system to restart the engine.

Auto StartStop Shift to

P, then Restart Engine

The system is not functioning. A manual restart is required.

Auto StartStop Manual

Restart Required

Displays when conditions are not met for the Auto StartStop

system to function properly. See Auto-Start-Stop (page

151).

Auto StartStop Not

Available

StartStop has shut off the engine automatically.

Engine Stopped

StartStop is starting the engine automatically.

Engine Starting

The wheels are at a sharp angle or the steering wheel is being

turned.

Engine On due to Vehicle

Maneuvering

Action

Message

The wheels are at a sharp angle or the steering wheel is being

turned.

Engine On due to

Steering Wheel Maneuv-

ering

Engine may be on to support high demand for electrical

accessories, such as operating power windows, rear defroster,

or when using the power point.

Engine On due to

Accessory Usage

Engine is on to support normal vehicle operation. Includes

external vehicle conditions, such as altitude, traffic, low

ambient temperature. Also includes battery outside optimal

operating conditions (state of charge and temperature), and

inadequate brake vacuum (can occur if the brake pedal is

depressed a number of times in succession).

Engine On Normal Oper-

ation

Engine is on in order to increase the engine temperature to an

acceptable level.

Engine On due to Low

Temperature

Engine is on to support normal vehicle operation due to low

outside ambient temperature.

Engine On due to

Outside Air Temp

Engine is on in order to increase the engine temperature to an

acceptable level.

Engine On due to Engine

Warming

Engine is on due to a low gear selection by the transmission.

Engine On due to

Selected Gear

Engine is on due to a steep road grade.

Engine On due to Steep

Grade

Engine is on due to no key being detected by the vehicle.

Engine On due to Key not

Detected

Engine is on due to the driver door being opened.

Engine On due to Driver

Door Opened

Engine is on due to the driver seat belt being unbuckled.

Engine On due to Driver

Belt Unbuckled

Engine is on to achieve or maintain interior compartment at

an acceptable level.

Engine On due to

Heating /Cooling

Engine is on, which is required to support the use of the power

outlet (110V).

Engine On due to Power

Outlet in Use

Engine is on due to the vehicle battery needing to be charged.

Engine On due to Vehicle

Charging

You have disabled the Start Stop feature.

Deactivated by Driver

Automatic Engine Shutdown

Action

Message

The engine is getting ready to shut off.

Engine Shuts Off In

{seconds to shut off:#0}

Seconds

The engine has shut off to help increase fuel economy.

Engine Shut Off For Fuel

Economy

The engine is getting ready to shut off. You can press OK on

the left steering wheel button to override the shut down.

Engine Shuts Off in

{seconds to shut off:#0}

Seconds Press Ok to

Override

All-Wheel Drive

Action

Message

The all-wheel drive system temporarily turns off to protect

itself from overheating.

AWD Temporarily

Disabled

The all-wheel drive system temporarily turns off to protect

itself from overheating or if you are using the temporary spare

tire.

AWD OFF

The all-wheel drive system will resume normal function and

clear this message after driving a short distance with the road

tire re-installed or after the system cools.

AWD Restored

The all-wheel drive system is not operating properly. If the

warning stays on or continues to come on, contact an

authorized dealer as soon as possible.

AWD Malfunction

Service Required

Battery and Charging System

Action

Message

The charging system needs servicing. If the warning stays on

or continues to come on, contact an authorized dealer as soon

as possible.

Check Charging System

The battery management system detects an extended low-

voltage condition. Your vehicle will disable various features

to help preserve the battery. Turn off as many of the electrical

loads as soon as possible to improve system voltage. If the

system voltage has recovered, the disabled features will

operate again as normal.

Low Battery Features

Temporarily Turned Off

The battery management system determines that the battery

is at a low state of charge. Turn your ignition off as soon as

possible to protect the battery. This message will clear once

you restart your vehicle and the battery state of charge has

recovered. Turning off unnecessary electrical loads will allow

faster battery state-of-charge recovery.

Turn Power Off To Save

Battery

Blind Spot Information and Cross Traffic Alert System

Action

Message

A fault with the system has occurred. Contact an authorized

dealer as soon as possible.

Blindspot System Fault

The system sensors are blocked.  See Blind Spot Informa-

tion System (page 208).

Blindspot Not Available

Sensor Blocked See

Manual

The system detects a vehicle.  See Blind Spot Information

System (page 208).

Cross Traffic Vehicle

Coming From X

The blind spot information system and cross traffic alert

system sensors are blocked.  See Blind Spot Information

System (page 208).

Cross Traffic Not Avail-

able Sensor Blocked See

Manual

A fault with the system has occurred. Contact an authorized

dealer as soon as possible.

Cross Traffic System

Fault