Ford F-150 (2018 year). Manual - part 13

 

  Index      Ford     Ford F-150 - service manual 2018 year in english

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  11  12  13  14   ..

 

 

Ford F-150 (2018 year). Manual - part 13

 

 

GENERAL INFORMATION ON
RADIO FREQUENCIES

This device complies with Part 15 of the
FCC Rules and with Industry Canada
license-exempt RSS standard(s).
Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) This device
must accept any interference received,
including interference that may cause
undesired operation.

Note: Changes or modifications not
expressively approved by the party
responsible for compliance could void the
user's authority to operate the equipment.
The term IC before the radio certification
number only signifies that Industry Canada
technical specifications were met.

The typical operating range for your
transmitter is approximately 33 feet (10
meters). Vehicles with the remote start
feature will have a greater range. One of
the following could cause a decrease in
operating range:

weather conditions

nearby radio towers

structures around the vehicle

other vehicles parked next to your
vehicle

Other short-distance radio transmitters,
such as amateur radios, medical
equipment, wireless headphones, remote
controls and alarm systems may operate
on the same frequency as your remote
control. If other transmitters are operating
on those frequencies, you may not be able
to use your remote control. Using your
remote control near some types of
electronic equipment, such as USB devices,

computers or cell phones can interfere with
remote operation. Operating your remote
control near metal or metallic-finished
purses, bags or clothing can interfere with
remote operation. You can lock and unlock
the doors with the key.

Note: Make sure to lock your vehicle before
leaving it unattended.

Note: If you are in range, the remote control
will operate if you press any button
unintentionally.

Intelligent Access

The system uses a radio frequency signal
to communicate with your vehicle and
authorize your vehicle to unlock when one
of the following conditions are met:

You touch the inside of the front
exterior door handle within 3 ft (1 m)
proximity of an intelligent access key.

You press the tailgate release button.

You press a button on the transmitter.

If excessive radio frequency interference
is present in the area or if the transmitter
battery is low, you may need to
mechanically unlock your door. You can
use the mechanical key blade in your
intelligent access key to open the driver
door in this situation.  See Remote
Control (page 55).

REMOTE CONTROL

Integrated Keyhead Transmitter

 (If

Equipped)

Use the key blade to start your vehicle and
unlock or lock the driver door from outside
your vehicle.  The integrated keyhead
transmitter functions as a programmed
ignition key that operates all the locks and
starts your vehicle, as well as a remote
control.

E191532

Press the button to release the key blade.
Press and hold the button to fold the key
blade back in when not in use.

E151795

Note:  Your vehicle keys came with a
security label that provides important key
cut information.  Keep the label in a safe
place for future reference.

Intelligent Access Key

 (If Equipped)

Note: You may not be able to shift out of
park (P) unless the intelligent access key is
inside your vehicle.

E218399

The intelligent access keys operate the
power locks and the remote start system.
The key must be in your vehicle to use the
push button start.

Removable Key Blade

The intelligent access key also contains a
removable key blade that you can use to
unlock your vehicle.

E218400

Press the release button and pull the key
blade out.

E151795

Note:  Your vehicle keys came with a
security label that provides important key
cut information.  Keep the label in a safe
place for future reference.

Replacing the Battery

Note: Refer to local regulations when
disposing of transmitter batteries.

Note: Do not wipe off any grease on the
battery terminals or on the back surface of
the circuit board.

Note:  Replacing the battery does not erase
the programmed key from your vehicle.  The
transmitter should operate normally.

A message appears in the information
display when the remote control battery
is low.  See General Information (page
111).

Integrated Keyhead Transmitter

The remote control uses one coin-type
three-volt lithium battery CR2032 or
equivalent.

Press the button to release the key blade
before beginning the procedure.

E191533

1.

Insert a suitable tool, for example a
screwdriver, in the position shown and
gently push the clip.

2. Press the clip down to release the

battery cover.

E151799

3. Carefully remove the cover.

E151800

Note: Do not touch the battery contacts or
the printed circuit board with the
screwdriver.

4. Insert a screwdriver as shown to

release the battery.

E151801

5. Remove the battery.

6. Install a new battery with the + facing

up.

7.

Replace the battery cover.

Intelligent Access Key

The remote control uses one coin-type
three-volt lithium battery CR2450 or
equivalent.

E218400

1.

Push the release button and pull the
key blade out.

 

 

 

 

 

 

 

Content   ..  11  12  13  14   ..