|
|
|
132
Assembly for installing and removing the rear seat
Tilt Slide Seat
With the seatback tilted forward, the tilt slide
seat can be moved forward to provide additional
entry space to access the rear seat compartment
of the vehicle.
To operate the tilt slide seat:
1.
Lift the seatback release lever on the
outboard side of the seat cushion to unlock
the slide mechanism and the seatback.
2.
Push the seat assembly forward to provide
entry space to the rear seat compartment of
the vehicle.
R
WARNING
Do not place objects behind or under the
front seat which can prevent the seat from
returning to the locked position.
133
Relocking the seat after a tilt slide operation:
3.
Push the seat backrest to its upright latched
position. Continue to push the seat rearward
to return it to its latched position. (This can
be done from inside the rear seat
compartment or from outside the vehicle.)
NOTE:
The seat can no longer be moved
rearward when in its latched position.
Prior to operating the vehicle, check to ensure
that the seat assembly is locked by pushing or
pulling the seat forward or rearward. If seat
does not lock, repeat steps 2 and 3.
134
To operate the seat adjuster:
4.
To adjust the seats forward or rearward,
locate the release lever at the right lower
front area of the seat cushion. Move the
release lever to the right and hold until the
desired seat position is obtained, then release
the lever to relock the seat.
Using the Power Lumbar Support and Side
Bolsters
If your vehicle is equipped with this option, you
can inflate a lumbar support pad in the seat
back. To inflate the lumbar pad, push the (+)
side of the rocker switch. To deflate push the (-)
side of the switch.
Power lumbar switch
135
Cleaning the Seats
Leather and vinyl
For routine cleaning, wipe the surface with a
soft, damp cloth. For more thorough cleaning,
wipe the surface with a leather and vinyl cleaner
or a mild soap.
Wipe the surface with a damp, soft cloth, then
dry and buff with a dry, soft cloth.
Fabric
Remove dust and loose dirt with a whisk broom
or a vacuum cleaner. Remove fresh spots
immediately. Follow the directions that come
with the cleaner.
NOTE:
Before using any cleaner, test it on a
small, hidden area of fabric. If the
fabric’s color or texture is adversely
affected by a particular cleaner, do not
use it.
Mirrors
With the door closed and the seat adjusted for
comfort and proper vehicle control, move the
mirrors for best view by tilting up or down, left
or right. Do not adjust the mirrors while the
vehicle is in motion.
R
WARNING
Make sure you can see clearly through the
rearview mirror at all times. Do not allow
anything to block your vision. If you can’t
see through the mirror, you could be
involved in an accident and injure
yourself or others.
|
|
|