Dodge Journey (2020 year). Manual in english

344

MULTIMEDIA

Even though the system is designed for many

languages and accents, the system may not

always work for some.

NOTE:

It is recommended that you do not store names

in your favorites phonebook while the vehicle is

in motion.

Phonebook (Mobile and Favorites) name recog-

nition rate is optimized when the entries are not

similar. You can say “O” (letter “O”) for “0”

(zero).

Even though international dialing for most

number combinations is supported, some

shortcut dialing number combinations may not

be supported.

Far End Audio Performance
Audio quality is maximized under:



Low-To-Medium Blower Setting



Low-To-Medium Vehicle Speed



Low Road Noise



Smooth Road Surface



Fully Closed Windows



Dry Weather Conditions



Operation From The Driver's Seat

Performance such as audio clarity, echo, and

loudness to a large degree relies on the phone

and network, and not the Uconnect Phone.
Echo at the far end can sometimes be reduced

by lowering the in-vehicle audio volume.
In a convertible vehicle, system performance

may be compromised with the convertible top

down.

Voice Text Reply
Uconnect Phone can read or send new

messages on your phone.
Your phone must support SMS over Bluetooth®

to use this feature. If the Uconnect Phone deter-

mines your phone is not compatible with SMS

messaging over Bluetooth®, the Messaging

button will be grayed out and the feature will not

be available for use.

NOTE:

Uconnect Phone SMS is only available when the

vehicle is not moving.

Read Messages:
If you receive a new text message while your

phone is connected to Uconnect Phone, an

announcement will be made to notify you that

you have a new text message.
Once a message is received and viewed or

listened to, you will have the following options:



Send a Reply



Forward



Call

WARNING!



ALWAYS drive safely with your hands on the

steering wheel. You have full responsibility

and assume all risks related to the use of

the Uconnect features and applications in

this vehicle. Only use Uconnect when it is

safe to do so. Failure to do so may result in

an accident involving serious injury or

death.



ALWAYS follow the law! Failure to follow

traffic laws may result in serious injury or

death.

MULTIMEDIA

345

Send Messages Using Buttons On The Touch-

screen:
You can send messages using Uconnect Phone.

To send a new message:

1. Press the Phone button on the touch-

screen.

2. Press the Messaging button on the touch-

screen then “New Message.”

3. Press one of the 18 preset messages and

the person you wish to send the message

to.

4. If multiple numbers are available for the

contact, select which number you would like

to have the message sent.

5. Press “Send” or “Cancel.”

Send Messages Using Voice Commands:

1. Push the Phone button.

2. After the “Listening” prompt and the

following beep, say “Send message to John

Smith mobile.”

3. After the system prompts you for what

message you want to send, say the

message you wish to send or say “List.”

There are 18 preset messages.

While the list of defined messages are being

read, you can interrupt the system by pushing
the Voice Command button and saying the

message you want to send.
After the system confirms that you want to send

your message to John Smith, your message will

be sent.
List of Preset Messages:

1. Yes.

2. No.

3. Okay.

4. I can't talk right now.

5. Call me.

6. I'll call you later.

7. I'm on my way.

8. Thanks.

9. I'll be late.

10. I will be <number> minutes late.

11. See you in <number> minutes.

12. Stuck in traffic.

13. Start without me.

14. Where are you?

15. Are you there yet?

16. I need directions.

17. I'm lost.

18. See you later.

Bluetooth® Communication Link
Mobile phones have been found to lose connec-

tion to the Uconnect Phone. When this

happens, the connection can generally be

re-established by switching the mobile phone

OFF/ON. Your mobile phone is recommended to

remain in Bluetooth® On mode.

346

MULTIMEDIA

Navigation Mode — If Equipped

Safety Precautions And Important

Information

Warning
Read this information carefully before starting

to operate the navigation system and follow the

instructions in this manual. Neither the FCA US

LLC nor Garmin® shall be liable for problems or

accidents resulting from failure to observe the

instructions in this manual.

Failure to avoid the following potentially

hazardous situations could result in an accident

or collision resulting in death or serious injury.



Always drive safely. Only use the navigation

features in this vehicle when it is safe to do

so. You accept full responsibility for the use

of the features in this vehicle.



When navigating, carefully compare informa-

tion displayed on the navigation system to all

available navigation sources, including road

signs, road closures, road conditions, traffic

congestion, weather conditions, and other

factors that may affect safety while driving.

For safety, always resolve any discrepancies

before continuing navigation, and defer to

posted road signs and road conditions.



The navigation system is designed to provide

route suggestions. It is not a replacement for

driver attentiveness and good judgment. Do

not follow route suggestions if they suggest

an unsafe or illegal maneuver or would place

the vehicle in an unsafe situation.



Be careful of the ambient temperature. Using

the navigation system at extreme tempera-

tures can lead to malfunction or damage.

Also note that the unit can be damaged by

strong vibration, metal objects, or by water

getting inside the unit.

Caution
The navigation system is designed to provide

you with route suggestions. It does not reflect

road closures or road conditions, weather

conditions, or other factors that may affect

safety or timing while driving.
Use the navigation system only as a naviga-

tional aid. Do not attempt to use the navigation

system for any purpose requiring precise

measurement of direction, distance, location,

or topography.
The Global Positioning System (GPS) is oper-

ated by the United States government, which is

solely responsible for its accuracy and mainte-

nance. The government system is subject to

changes that could affect the accuracy and

performance of all GPS equipment, including

the navigation system.

WARNING!



ALWAYS drive safely with your hands on the

steering wheel. You have full responsibility

and assume all risks related to the use of

the Uconnect features and applications in

this vehicle. Only use Uconnect when it is

safe to do so. Failure to do so may result in

an accident involving serious injury or

death.



ALWAYS follow the law! Failure to follow

traffic laws may result in serious injury or

death.

MULTIMEDIA

347

Notice
This navigation system can be used when the

ignition key is turned to ON/RUN or ACC. To

preserve the battery, however, it should be used

with the engine running whenever possible.

Using the navigation system for a long time with

the engine switched off can cause the battery to

run down.

Map Data Information
Garmin® uses a combination of governmental

and private data sources. Virtually all data

sources contain some inaccurate or incomplete

data. In some countries, complete and accurate

map information is either not available or is

prohibitively expensive.

Getting Started

To access the Navigation system, press the Nav

button on bottom of the screen.

Setting Up Your System
When using your navigation system for the first

time, complete the following tasks:

1. Acquire satellites.

2. Understand the main menu.

Acquiring Satellites
The bars indicate satellite strength.
Go to an open area, away from tall buildings and

trees.
Acquiring satellite signals can take a few

minutes.

Main Menu

Navigation Main Menu

Using The On-Screen Buttons



Press and hold to quickly return to the

main menu.



Press and to see more choices.



Press and hold and to scroll faster.

Finding A Point Of Interest
The detailed maps loaded in your navigation

system contain points of interest, such as

restaurants, hotels and auto services.

1. From the main menu, press Where To? >

Points of Interest.

2. Select a category.

3. If necessary, select a subcategory.

4. Select a destination.

5. Press Go!

1 — Press To Find A Destination
2 — Press To View The Map
3 — Press To Stop A Route
4 — Press To Detour A Route
5 — Press To Open The Menu Of Tools
6 — Press To Open The Menu Of Settings

348

MULTIMEDIA

Finding A Location By Spelling The Name

1. From the main menu, press Where To? >

Points of Interest > Spell Name.

2. Enter all or part of the name.

3. Press Done.

4. Select a destination.

5. Press Go!

Using The On-screen Keyboard



Press a character on the keyboard to enter a

letter or number.



Press “Space” to add a space.



Press to delete a character.



Press and hold to erase the entire entry.



Press to select the keyboard language

mode.



Press to enter special characters, such as

punctuation marks.

Adding Points To The Active Route

1. While navigating a route, press to return

to the main menu.

2. From the main menu, press Where To?

3. Select a category.

4. If necessary, select a subcategory.

5. Select a destination.

6. Press Go!

7. Press Add as a Via Point.

Changing The Destination Of The Active Route
Before you can change destinations you must

be navigating a route.

1. Press to return to the main menu.

2. Press Where To?

3. Search for the location.

4. Press Go!

5. Press Set as a New Destination.

Taking A Detour
While navigating a route, you can use detours to

avoid obstacles ahead of you, such as construc-

tion zones.

NOTE:

If the route you are currently taking is the only

reasonable option, the navigation system might

not calculate a detour.

1. While navigating a route, press .

2. From the main menu, press Detour.

Stopping The Route

1. While navigating a route, press .

2. From the main menu, press Stop.

Finding Locations

The Where To? menu provides several different

categories you can use to search for locations.

To perform a simple search, see the “Getting

Started” section.

MULTIMEDIA

349

Finding An Address

NOTE:

Depending on the version of the built-in map

data on your navigation system, the button

names and the order of steps could be different

than the steps below.

1. From the main menu, press Where To? >

Address.

2. If necessary, change the state, the country,

or the province.

3. Press Spell City.

4. Enter the city/postal code.

NOTE:

If you are unsure of the city/postal code, press

Search All.

5. Press Done.

6. If necessary, select the city/postal code.

NOTE:

Not all map data provides postal code

searching.

7. Enter the number of the address.

8. Press Done.

9. Enter the street name.

10. Press Done.

11. If necessary, select the street.

12. If necessary, select the address.

Using The Go! Page
The Go! page opens when you select a location

to navigate to.

Using Go!

1. Press to call the selected location when

your device is connected to phone, or to

save the location to your favorites.

2. Press to switch between 2D and 3D view.

3. Press to rotate the view.

4. Press to view more information for the loca-

tion.

5. Press to zoom in and out.

6. Press to return to the previous page. Press

and hold to return to the main menu.

7. Press to create a turn-by-turn route to this

location.

Setting A Home Location
You can set your home location for the location

you return to most often.

1. From the main menu, press Where To? >

Go Home.

2. Select Enter My Address, Use My Current

Location or Recently Found.

Going Home
Before you can navigate to home you must set

a home location.



From the main menu, press Where To? > Go

Home.

350

MULTIMEDIA

Resetting Your Home Location

1. From the main menu, press Where To? >

> Set Home Location.

2. Select an option to change your address.

Editing Your Home Location Information

1. From the main menu, press Where To? >

Favorites > Home.

2. Press > Edit.

3. Enter your changes.

4. Press Done.

Viewing A List Of Recently Found Locations
Your navigation system stores the last 50 loca-

tions you have found.



From the main menu, press Where To? >

Recently Found.

Clearing The List Of Recently Found Locations
From the main menu, press Where To? >
Recently Found > > Clear > Yes.

About Favorites
You can save locations in your Favorites so you

can quickly find them and create routes to

them. Your home location is also stored in

Favorites.
Saving Your Current Location To Favorites

1. From the map, press the vehicle icon.

2. Press Save.

3. Enter a name.

4. Press Done.

The location is saved in Favorites.
Saving Locations To Favorites

1. Search for the location.

2. From the Go! page, press > Save > OK.

Finding Favorites

1. From the main menu, press Where To? >

Favorites.

2. If necessary, select a category.

3. Select a saved location.

Editing Favorites

1. From the main menu, press Where To? >

Favorites.

2. Select a category.

3. Select a favorite.

4. Press the information box.

5. Press > Edit.

6. Select an option:



Name



Phone Number



Categories



Change Map Symbol

7. Edit the information.

8. Press Done.

MULTIMEDIA

351

Planning A Trip
You can use Trip Planner to create and save a

trip with multiple destinations.

1. From the main menu, press Where To? >

Trip Planner.

2. Press .

3. Press Select Start Location.

4. Search for a location.

5. Press Select.

6. Press to add an additional location.

7. Press Select.

8. Repeat steps 4-6 to add additional loca-

tions to your trip.

9. Press Next.

10. Enter a name.

11. Press Done.

Navigating To A Saved Trip

1. From the main menu, press Where To? >

Trip Planner.

2. Select a saved trip.

3. Press Go!

Editing A Saved Trip

1. From the main menu, press Where To? >

Trip Planner.

2. Select a saved trip.

3. Press

4. Select an option:



Press Rename Trip to edit the trip name.



Press Edit Destinations to add or delete

locations.



Press Delete Trip to delete the entire trip.



Press Optimize Order to arrange your trip

locations in the most efficient order.

Using The Map Buttons

1. From the main menu, press Where To? >

Browse Map.

2. Press anywhere on the map.



Press and to zoom in and out.



Press to switch between 2D and 3D

views.



Press to rotate the view.

Browsing The Map By Pressing The Touch-

screen



Press an area on the map to select a location.
An information box appears next to the loca-

tion.



Press and drag the map to view different

parts of the map.



Press the map twice to zoom in and center on

a location.

352

MULTIMEDIA

Finding A Location Using The Map

1. From the main menu, press Where To? >

Browse Map.

2. Press a location.

An information box appears next to the loca-

tion.

3. Press the information box.

4. Select an option:



Press > Save.

5. Press Go!

Setting A Simulated Location
You can use the GPS simulator to select another

location, near which you can search for and

save points of interest. This may be helpful

when planning trips.

1. From the main menu, press Tools >

Settings > System > GPS Simulator > On.

2. From the main menu, press Where To? >

Browse Map.

3. Press an area on the map.

4. Press > Set Location.

Entering Coordinates
If you know the geographic coordinates of your

destination, you can use your navigation system

to navigate to the destination using the latitude

and longitude coordinates.

1. From the main menu, press Where To? >

Coordinates.

2. Press a field to enter the latitude and longi-

tude data.

3. Press View on Map.

4. Press Go!

Changing The Map Coordinate Format

1. From the Home Screen, press Where To? >

Coordinates > > Format.

2. Select a format.

Speaking Commands

About Voice Commands

NOTE:

The voice command feature is not available for

all languages or regions.

The voice commands allow you to use your navi-

gation system by speaking the words you see on

the screen or by speaking certain commands.

Activating Voice Command



Press the Voice Recognition button.



The navigation system enters voice

command.

About Icons And Tones



The navigation system sounds two tones

when it enters and exits voice recognition

mode.



A red icon appears in the upper-right

corner of the screen when the navigation

system is not ready for your command.



Wait until the icon is green to speak your

command.

MULTIMEDIA

353

Tips for Using Voice Commands



Speak in a normal voice directed at the navi-

gation system.



Speak commands as they appear on the

screen.



Respond to voice prompts from the naviga-

tion system as needed.



Speak “Exit” to exit voice command.

Navigating To A Popular Location Using Voice

Commands
You can speak the names of very popular,

well-known locations.

1. Press the voice command button.

2. Speak “Find by Name.”

3. Listen for the voice prompt and speak the

name of the location.
A list of locations appears.

Navigating To A Popular Place With Voice Commands

4. Speak the line number.

“Line 1”

5. Speak an option:



Speak “Go!” to navigate to the location.



Speak “Call” to call the location when

connected to a compatible mobile phone.

Speaking An Address

1. Speak “Voice Command.”

2. Speak “Find Address.”

3. Follow the on-screen prompts.

About The Map Pages

Viewing The Map While Navigating
NOTICE
In no event shall Garmin® be liable for any inci-

dental, special, indirect, or consequential

damages, including, without limitation,

damages for any traffic fines or citations,

whether resulting from the use, misuse, or

inability to use the product or from defects in

the product. Some states do not allow the exclu-

sion of incidental or consequential damages, so

the above limitations may not apply to you.
Your route is marked with a magenta line. A

checkered flag marks your destination.

354

MULTIMEDIA

As you travel, your navigation system guides you

to your destination with voice prompts, arrows

on the map, and directions at the top of the

map. If you depart from the original route, your

navigation system recalculates the route and

provides new directions.
A speed limit icon displaying the current speed

limit may appear as you travel on major road-

ways.
Using The Navigation Map

Navigation Map

1. Press to view the next turn.

The turn indicator also tells you which lane

you should be in to prepare for your next

maneuver, when available.

2. Press to view the turn list.

3. Press to zoom in and zoom out.

4. Press to return to the main menu.

5. Press to display a different data field.

6. Press to view information for the location.

7. Press to view trip information.

About myTrends
When the myTrends feature is enabled, your

estimated time of arrival and traffic information

for your frequent destinations, like your work-

place, automatically appear in the navigation

bar at the top of the map.
When myTrends information appears in the

navigation bar, you can press the navigation bar

to view route options for the suggested destina-

tion.
Enabling myTrends
From the main menu press Settings > Naviga-

tion > myTrends > Enabled.

Viewing Trip Information
The trip information page displays your present

speed and provides statistics about your trip.

NOTE:

If you make frequent stops, leave the navigation

system turned on so it can accurately measure

elapsed time during the trip.

From the map, press the Speed field.

Trip Information

Resetting Trip Information

1. From the map, press the Speed field.

2. Press .

3. Select an option:



Press Reset Trip Mileage to reset the infor-

mation on the trip computer.



Press Reset Max. Speed to reset the

maximum speed.

MULTIMEDIA

355

Viewing The Turn List
When you are navigating a route, you can view

all of the turns for your entire route and the

distance between turns.

1. From the map, press the text bar on the top

of the map.

Upcoming Turn List

2. Select an option:



Select a turn on the list to view the next

turn.



Press > Map to view the entire route on

the map.

Viewing The Next Turn
Before you can view the next turn you must be

navigating a route.
The next turn shows the turn on the map and

the distance and time left before you reach the

turn.
Press the turn indicator in the top left corner of

the map.

Next Turn

Viewing The Junction View
Before you can view the junction view, you must

be navigating a route.
The junction view displays a view of some

upcoming junctions and in which lane you

should be driving.

Junction View

Using The Tools

Viewing Current Location Information
Use the Where Am I? page to view information

about your current location. This feature is

helpful if you need to tell emergency personnel

your location.



From the main menu, press Tools > Where

Am I?

Finding Nearby Services

1. From the main menu, press Tools > Where

Am I?

2. Press Hospitals, Police Stations or Fuel to

view the nearest locations in that category.

356

MULTIMEDIA

Using Help
From the main menu, press Tools > Help to view

information about using your navigation

system.
Searching Help Topics
From the main menu, press Tools > Help.

Using The World Clock

1. From the main menu, press Tools > World

Clock.

2. Press a city name.

3. Enter a new city name.

4. Press Done.

5. If necessary, select a city.

Viewing The World Map



From the main menu, press Tools > World
Clock > .



Nighttime hours appear in the shaded area.

Using The Calculator
From the main menu press Tools > Calculator.

Using The Unit Converter

1. From the main menu, press Tools > Unit

Converter.

2. Press the box with a unit of measurement

listed.

3. Select a unit of measurement.

4. Press Save.

Two units of measurement are listed.

5. Press a unit of measurement to change.

6. Select a unit of measurement.

7. Press Done.

8. Repeat steps 5 and 6, if necessary.

9. Enter a value.

10. Press Done.

Setting Currency Conversion Rates Manually
You can update the currency conversion rates

manually so that you are always using the most

current rates.

1. From the main menu press Tools > Unit

Converter.

2. Press the box with a currency listed.

3. Select Currency.

4. Press Save.

5. Press a currency box.

6. Select the currency you want to update.

7. Repeat steps 3-6 to select a currency to

convert to, if necessary.

8. Press a box under a currency.

9. Enter a new value for the currency.

10. Press Done.

11. Repeat steps 8 and 9, if necessary.

MULTIMEDIA

357

Traffic

Notice
Garmin® is not responsible for the accuracy or

timeliness of the traffic information. Your navi-

gation system may receive traffic content via

Satellite Radio service in North America or via

FM broadcast in other regions.

About The Traffic Icon
When you are receiving traffic information, a

traffic icon appears on the map. The traffic icon

changes color to indicate the severity of traffic

conditions.

Traffic On Your Route
When calculating your route, the navigation

system examines the current traffic and auto-

matically optimizes the route for the shortest

time. If a severe traffic delay occurs on your

route while you are navigating, the navigation

system automatically recalculates the route.
You might still be routed through traffic if no

better alternative routes exist.
Manually Avoiding Traffic On Your Route

1. From the map press the .

2. Press Traffic On Route.

3. If necessary, press the arrows to view other

traffic delays on your route.

4. Press Avoid.

Viewing The Traffic Map
The traffic map shows color-coded traffic flow

and delays on nearby roads.

1. From the map press .

2. Press Traffic Map to view the traffic inci-

dents on a map.

Searching For Traffic Delays

1. From the map page press .

2. Press Traffic Search to view a list of roads

with traffic delays.

3. Press an item in the list to view delays on

the road.

4. If there is more than one delay, press the

arrows to view additional delays.

Color Descrip-

tion

Meaning

Green Low

severity

Traffic is flowing freely.

Yellow Medium

severity

Traffic is moving but

there is a delay. There is

moderate traffic

congestion.

Red

High

severity

Traffic is not moving or

moving very slowly. There

is a severe delay.

Gray

No data

Traffic information is not

available.

Color Descrip-

tion

Meaning

358

MULTIMEDIA

Customizing The Navigation System

1. From the main menu, press “Settings.”

Customizing The Navigation System

2. Press a setting category.

3. Press the setting to change it.

System Settings
From the main menu press Settings > System.



GPS Simulator — stops the navigation system

from receiving a GPS signal, and saves

battery power.



About — displays the software version

number, the unit ID number and information

on several other software features.

NOTE:

You need this information when you update the

system software or purchase additional map

data.

Restoring The System Settings
From the main menu, press Settings > System
> > Restore.

Changing The Map Settings
From the main menu press Settings > Map.



Map Detail — sets the level of detail on the

map. More detail may result in slower map

drawing.



Map View — sets the perspective on the Map

page.



Map Theme — changes the color of the map

data.



Map Data Layout — changes the amount of

data visible on the map.



Vehicle — changes the icon to represent your

position on the map.



Trip Log



Show on Map — displays the path of your

travels on the map.



Clear Trip Log

Changing The Map Perspective

1. From the main menu press Settings > Map

> Map View.

2. Select an option:



Press Track Up to display the map in two

dimensions (2-D), with your direction of

travel at the top.



Press North Up to display the map in 2-D

with North at the top.



Press 3D to display the map in three

dimensions.

Route Preferences
From the main menu, press Settings > Naviga-

tion > Route Preference.
The route calculation is based on road speeds

and vehicle acceleration data for a given route.



Faster Time — Calculates routes that are

faster to drive but can be longer in distance.

MULTIMEDIA

359



Shorter Distance — Calculates routes that are

shorter in distance but can take more time to

drive.



Prompted — Select the faster time and

shorter distance for your route.

Avoiding Road Features

1. From the main menu press Settings > Navi-

gation > Avoidances.

2. Select the road features to avoid on your

routes.

3. Press “Save.”

About trafficTrends
When the trafficTrends feature is enabled, your

navigation system uses historic traffic informa-

tion to calculate more-efficient routes. Different

routes may be calculated based on traffic

trends for the day of the week or based on the

time of day.
Enabling trafficTrends

1. From the main menu press Settings >

Navigation > trafficTrends.

2. Select Enabled.

Restoring The Original Navigation Settings
From the main menu press Settings >
Navigation > > Restore.

Language Settings
From the main menu press Settings >

Language.



Voice Personality — sets the language for

voice prompts.



Keyboard — sets the language for your

keyboard.



Keyboard Layout — sets the keyboard layout.

Restoring The Original Language Settings



From the main menu press Settings >
Language > > Restore.

Restoring Original Traffic Settings
From the main menu, press Settings > Traffic
> > Restore.

Restoring All Original Settings
From the main menu, press Settings > >

Restore > Yes.

Appendix

About GPS Satellite Signals
The navigation system must acquire satellite

signals in order to navigate.
When the navigation system has acquired satel-

lite signals, the signal strength bars on the main
menu are full . When it loses satellite signals,
the bars are clear .
For more information about GPS, go to

www.garmin.com/aboutGPS

Updating The Software
To update the navigation system software, you

must have a USB mass storage device and an

Internet connection.

1. Go to

auto-update.garmin.com

2. Find your model and select Software

Updates > Download.

3. Read and accept the terms of the Software

License Agreement.

4. Follow the instructions on the Web site to

complete the installation of the software

update.

Dodge Journey (2020 year). Manual in english - page 22