Dodge Journey (2020 year). Manual in english

296

MULTIMEDIA

When in SiriusXM® Satellite mode:



The SiriusXM® Presets are displayed at the

top of the screen.



The SiriusXM® Channel Number is displayed

along with Artist and Song name.



The SiriusXM® function buttons on the

touchscreen are displayed on the bottom.

In addition to the tuning functions common to

all radio modes, the browse, info, and more

button on the faceplate functions are available

in SiriusXM® Mode. Pressing the more button

slides over the additional functions that are on

the second level of the bottom bar. This second

level stays for 10 seconds and then returns to

the main top level of the bottom bar. The

second level displays audio, Fav, Gamezone

and Replay buttons.

Browse
Press the Browse button at the bottom left of

the screen to enter the browse screen.
The Browse screen in SAT mode provides you

the ability to browse by All, Favorites or Genres.

You can also access Gamezone, and Traffic and

Weather settings in the Browse screen.

Favorites
Press the More... button and then the Fav

button to access the favorites feature.
The favorites feature enables you to set a

favorite artist, or song. The radio then uses this

information to alert you when either the favorite

song, or works by the favorite artist are being

played at any time by any of the SiriusXM®

Channels.

Gamezone
Press the More... button and then the Game-

zone button to access the Gamezone feature.

This feature provides you with the ability to

Select teams, edit the selection, and set Alerts.

Replay
The replay function provides a means to store

and replay up to 22 minutes of music audio and

48 minutes of talk radio. Once the channel is

switched, content in replay memory is lost.
Press the Replay button. The Play/Pause,

Rewind/Forward and Live buttons will display at

the top of the screen, along with the replay time.
You can exit by pressing the Replay button any

time during the Replay mode.

Play/Pause
Press the Pause or Play buttons to pause

playing of the content at any time that the

content is playing live or rewound content. Play

can be resumed again by pressing the

Pause/Play button.
Rewind
Press the RW button to rewind the content in

steps of five seconds. Pressing the RW button

for more than two seconds rewinds the content.

The Radio begins playing the content when the

RW button is released.
Forward
Each press of the FW button forwards the

content in steps of five seconds. Forwarding of

the content can only be done when the content

is previously rewound, and therefore, can not be

done for live content. A continuous press of the

FW button also forwards the content. The Radio

begins playing the content when the FW button

is released.
Live
Press the Live button to resume playing Live

content.

MULTIMEDIA

297

Media Mode

Disc Mode

Overview
Disc Mode is entered by either inserting a Disc

or by pressing the PLAYER button located left of

the display. Once in Player Mode, press the

Source button and select “Disc.”
A “No Disc” message will be displayed on the

screen in the Disc mode when a Disc is not

present in the Radio.

Inserting Compact Disc
Gently insert one Disc into the Disc player with

the Disc label facing up. The CD will automati-

cally be pulled into the Disc player and the Disc

icon will illuminate on the radio display. If a Disc

does not go into the slot more than 1 inch

(2.5 cm), a disc may already be loaded and

must be ejected before a new disc can be

loaded.
If you insert a disc with the ignition ON and the

radio ON, the unit will switch to Disc mode and

begin to play the disc. The display will show the

track number, and index time in minutes and

seconds. Play will begin at the start of track 1.

EJECT Button — Ejecting A Disc

Push the EJECT button to eject the

Disc.

If the Disc is not removed, the radio will reinsert

the Disc but will not play it.
A disc can be ejected with the radio and ignition

OFF.

Seek Up/Down
Press and release the Seek Up button for the

next selection on the Disc. Press and release
the Seek Down button to return to the begin-

ning of the current selection, or return to the

beginning of the previous selection if the Disc is

within the first eight seconds of the current

selection.

Fast Seek Up
Press and hold the Seek Up button and the

Disc player will begin to fast forward through the

current track until the button is released.

Fast Seek Down
Press and hold the Seek Down button and

the Disc player will begin to rewind through the

current track until the button is released.

Browse
Press the Browse button on the touchscreen to

scroll through and select a desired track on the

Disc. Press the Exit button on the touchscreen if

you wish to cancel the browse function.

CAUTION!



This CD player will accept 4-3/4 inch

(12 cm) discs only. The use of other sized

discs may damage the CD player

mechanism.



Do not use adhesive labels. These labels

can peel away and jam the player

mechanism.



Uconnect is a single CD player. Do not

attempt to insert a second CD if one is

already loaded.



Dual-media disc types (one side is a DVD,

the other side is a CD) should not be used,

and they can cause damage to the player.

298

MULTIMEDIA

Source
Press the source button to select the desired

audio source: “CD,” “AUX” or “USB”. This screen

will time out after a few seconds and return to

the main radio screen if no selection is made.

Info
Press the Info button to display the current

track information. Press the X button to cancel

this feature.

Shuffle
Press the More... button on the touchscreen

then the Shuffle button on the touchscreen to

play the selections on the compact disc in

random order to provide an interesting change

of pace. Press the Shuffle button on the touch-

screen a second time to turn this feature off.

Audio
Refer to “Audio” in “Radio Mode” for further

information on adjusting the audio settings.

USB Mode

Overview
USB/iPod® Mode is entered by either inserting

a USB Jump Drive or an iPod® cable into the

USB port, or by pushing the PLAYER button

located left of the display. Once in Player Mode,

press the Source button, and select

“USB/iPod®.”

Inserting USB Device
Gently insert the USB device into the USB Port.

If you insert a USB device into the USB port, with

the ignition ON and the radio ON, the unit will

switch to USB mode and begin to play. The

display will show the track number and index

time in minutes and seconds. Play will begin at

the start of track 1.

Seek Up/Down
Press and release the Seek Up button for the

next selection on the USB/iPod® device. Press
and release the Seek Down button to return

to the beginning of the current selection, or

return to the beginning of the previous selection

if the USB/iPod® device is within the first eight

seconds of the current selection.

Fast Seek Up
Press and hold the Seek Up button on the

touchscreen and the USB/iPod® device will

begin to fast forward through the current track

until the button on the touchscreen is released.

Fast Seek Down
Press and hold the Seek Down button and

the USB/iPod® device will begin to rewind

through the current track until the button is

released.

Browse
Press the Browse button on the touchscreen to

select Artist, Albums, Genres, Songs, Playlists or

Folders from the USB/iPod® device. Once the

desired selection is made you can chose from

the available media by pressing the button on

the touchscreen. Press the exit button on the

touchscreen if you wish to cancel the browse

function.

MULTIMEDIA

299

Source
Press the source button on the touchscreen to

select the desired audio source, CD, AUX, or

USB/iPod®. This screen will time out after a few

seconds and return to the main radio screen if

no selection is made.

Info
Press the Info button to display the current

track information. Press the X button to cancel

this feature.

Shuffle
Press the More... button then the Shuffle button

to play the selections on the USB/iPod® device

in random order to provide an interesting

change of pace. Press the Shuffle button a

second time to turn this feature off.

Audio
Refer to “Audio” in “Radio Mode” for further

information on adjusting the audio settings.

AUX Mode

Overview
AUX Mode is entered by inserting a AUX device

using a cable with a 3.5 mm audio jack into the

AUX port or by pushing the PLAYER button

located left of the display. Once in Player Mode,

press the Source button, and select “AUX.”

Inserting Auxiliary Device
Gently insert the Auxiliary device cable into the

AUX Port. If you connect an Auxiliary device with

a 3.5 mm stereo cable into the AUX Port, with

the ignition ON and the radio ON, the unit will

switch to AUX mode and begin to play.

Controlling The Auxiliary Device
The control of the auxiliary device (e.g.,

selecting playlists, play, fast forward, etc.)

cannot be provided by the radio; use the device

controls instead. Adjust the volume with the

ON/OFF VOLUME rotary knob, or with the

volume of the attached device.

NOTE:

The vehicle radio unit is acting as the amplifier

for audio output from the Auxiliary device.

Therefore if the volume control on the Auxiliary

device is set too low, there will be insufficient

audio signal for the radio unit to play the music

on the device.

Source
Press the source button to select the desired

audio source: “CD,” “AUX” or “USB”. This screen

will time out after a few seconds and return to

the main radio screen if no selection is made.

Audio
Refer to “Audio” in “Radio Mode” for further

information on adjusting the audio settings.

300

MULTIMEDIA

Bluetooth® Mode

Overview
Bluetooth® Streaming Audio (BTSA) or

Bluetooth® Mode is entered by pairing a

Bluetooth® device, containing music, to the

Uconnect System.
Before proceeding, the Bluetooth® device

needs to be paired through Uconnect to

communicate with the Uconnect System.

NOTE:

See the pairing procedure in the Owner's

Manual for more details.

Once the Bluetooth® device is paired to the

Uconnect System, push the PLAYER button

located on the left side of the display. Once in

Player Mode, press the Source button, and

select “Bluetooth®.”

Seek Up/Down
Press and release the Seek Up button on the

touchscreen for the next selection on the

Bluetooth® device. Press and release the Seek
Down button on the touchscreen to return to

the beginning of the current selection, or return

to the beginning of the previous selection if the

Bluetooth® device is within the first eight

seconds of the current selection.

Source
Press the Source button on the touchscreen to

select the desired audio source; CD,

USB/iPod®, AUX or Bluetooth®. This screen will

time out after a few seconds and return to the

main radio screen if no selection is made.

Info
Press the Info button to display the current

track information. Press the Info button a

second time to cancel this feature.

Audio
Refer to “Audio” in “Radio Mode” for further

information on adjusting the audio settings.

Uconnect Phone (4.3)

Radio 4.3

Uconnect Phone is a voice-activated,

hands-free, in-vehicle communications system.

Uconnect Phone allows you to dial a phone

number with your mobile phone.

Uconnect Phone supports the following

features:

Voice Activated Features:



Hands-Free dialing via Voice (“Call John

Smith Mobile” or, “Dial 248-555-1212”)



Redialing last dialed numbers (“Redial”)



Calling Back the last incoming call number

(“Call Back”)



View Call logs on screen (“Show Incoming

Calls,” “Show Outgoing Calls,” “Show Missed

Calls,” “Show Recent Calls”)



Searching Contacts phone number (“Search

for John Smith Mobile”)

Screen Activated Features:



Dialing via Keypad using touchscreen



Viewing and Calling contacts from Phone-

books displayed on the touchscreen



Setting Favorite Contact Phone numbers so

they are easily accessible on the Main Phone

screen



Viewing and Calling contacts from Recent

Call logs

MULTIMEDIA

301



Listen to Music on your Bluetooth® Device

via the touchscreen



Pairing up to 10 phones/audio devices for

easy access to connect to them quickly

Your mobile phone’s audio is transmitted

through your vehicle’s audio system; the system

will automatically mute your radio when using

the Uconnect Phone.
For Uconnect Customer Support:



US residents – visit

UconnectPhone.com

call 1-877-855-8400.



Canadian Residents - visit

Uconnect-

Phone.com

or call, 1-800-465-2001

(English) or 1-800-387-9983 (French).

If your mobile phone only supports the Headset

Profile you may not be able to use any Uconnect

Phone features. Refer to your mobile service

provider or the phone manufacturer for details.
Uconnect Phone allows you to transfer calls

between the system and your mobile phone as

you enter or exit your vehicle and enables you to

mute the system's microphone for private

conversation.

The Uconnect Phone is driven through your

Bluetooth® “Hands-Free Profile” mobile phone.

Uconnect features Bluetooth® technology - the

global standard that enables different elec-

tronic devices to connect to each other without

wires or a docking station, so Uconnect Phone

works no matter where you stow your mobile

phone (be it your purse, pocket, or briefcase), as

long as your phone is turned on and has been

paired to the vehicle's Uconnect Phone. The

Uconnect Phone allows up to 10 mobile phones

or audio devices to be linked to the system. Only

one linked (or paired) mobile phone and one

audio device can be used with the system at a

time. The system is available in English,

Spanish, or French languages.

Uconnect Phone Button

The Uconnect Phone Button is

used to enter the phone mode and

make calls, show recent, incoming,

outgoing calls, view phonebook etc.,

When you press the button you will hear a BEEP.

The beep is your signal to give a command.
Uconnect Voice Command Button

The Uconnect Voice Command

Button is only used for “barge in”

and when you are already in a call

and you want to send Tones or make

another call.
The Uconnect Phone is fully integrated with the

vehicle's audio system. The volume of the

Uconnect Phone can be adjusted either from

the radio volume control knob or from the

steering wheel radio control (right switch), if so

equipped.

WARNING!

Any voice commanded system should be

used only in safe driving conditions following

all applicable laws, including laws regarding

phone use. Your attention should be focused

on safely operating the vehicle. Failure to do

so may result in a collision causing serious

injury or death.

302

MULTIMEDIA

Operation

Voice commands can be used to operate the

Uconnect Phone and to navigate through the

Uconnect Phone menu structure. Voice

commands are required after most Uconnect

Phone prompts. There are two general methods

for how Voice Command works:

1. Say compound commands like

“Call John Smith mobile.”

2. Say the individual commands and allow the

system to guide you to complete the task.

You will be prompted for a specific command

and then guided through the available options.



Prior to giving a voice command, one must

wait for the beep, which follows the “Listen”

prompt or another prompt.



For certain operations, compound

commands can be used. For example,

instead of saying “Call” and then “John

Smith” and then “mobile,” the following

compound command can be said: “Call John

Smith mobile.”



For each feature explanation in this section,

only the compound command form of the

voice command is given. You can also break

the commands into parts and say each part

of the command when you are asked for it.

For example, you can use the compound

command form voice command “Search for

John Smith,” or you can break the compound

command form into two voice commands:

“Search Contact” and when asked “John

Smith.” Please remember, the Uconnect

Phone works best when you talk in a normal

conversational tone, as if speaking to

someone sitting a few feet/meters away from

you.

Natural Speech
Your Uconnect Phone Voice system uses a

Natural Language Voice Recognition (VR)

engine.
Natural speech allows the user to speak

commands in phrases or complete sentences.

The system filters out certain non-word utter-

ances and sounds such as “ah” and “eh”. The

system handles fill-in words such as “I would

like to.”

The system handles multiple inputs in the same

phrase or sentence such as “make a phone

call” and “to Kelly Smith.” For multiple inputs in

the same phrase or sentence, the system iden-

tifies the topic or context and provides the asso-

ciated follow-up prompt such as “Who do you

want to call?” in the case where a phone call

was requested but the specific name was not

recognized.
The system utilizes continuous dialog; when the

system requires more information from the user

it will ask a question to which the user can

respond without pushing the Voice Command

button on your steering wheel.

Help Command
If you need assistance at any prompt, or if you

want to know your options at any prompt, say

“Help” following the beep.
To activate the Uconnect Phone from idle,
simply push the Phone button (if active) on

your steering wheel and say a command or say

“help”. All Uconnect Phone sessions begin with
a push of the VR button or the Phone button

(if active) on the radio control head.

MULTIMEDIA

303

Cancel Command
At any prompt, after the beep, you can say

“Cancel” and you will be returned to the main

menu.
You can also push the Voice Recognition (VR)
button or Phone button (if active) on your

steering wheel when the system is listening for

a command and be returned to the main or

previous menu.

Pair (Link) Uconnect Phone To A Mobile Phone
To begin using your Uconnect Phone, you must

pair your compatible Bluetooth® enabled

mobile phone.
To complete the pairing process, you will need

to reference your mobile phone Owner's

Manual. The Uconnect website may also

provide detailed instructions for pairing.

NOTE:



You must have Bluetooth® enabled on your

phone to complete this procedure.



The vehicle must be in PARK.

1. You can do either of the following:

a. Push the Settings button on the face-

plate, page down to the Phone/

Bluetooth® button on the touchscreen,

press it and you will see the Paired

Phones screen. If there are no paired

phones you will see <Empty> as the first

device name.

b. Push the More button on the faceplate,

then press the Phone button on the

touchscreen and you will go to the

Uconnect Phone main screen. Press the

Settings button on the touchscreen. If

there are no phones currently paired a

pop-up appears. If Yes is selected, the

Paired Phones screen will appear. If No is

selected, the Uconnect Phone Main

Menu screen will appear.

2. At the Paired Phones screen press the Add

Device button on the touchscreen and a

pop-up with instructions appears.

3. Search for available devices on your

Bluetooth®-enabled mobile phone. When

prompted on the phone, select the

“Uconnect” device and enter the PIN.

4. When the pairing process has successfully

completed, the system prompts you to

choose whether or not this is your favorite

phone. Selecting Yes makes this phone the

highest priority. This phone takes prece-

dence over other paired phones within

range.

NOTE:

Software updates on your phone or the

Uconnect system may interfere with the

Bluetooth® connection. If this happens, simply

repeat the pairing process. However, first, make

sure to delete the device from the list of phones

on your Uconnect system. Next, be sure to

remove Uconnect from the list of devices in your

phone’s Bluetooth® settings.

Pair A Bluetooth® Streaming Audio Device

1. Push the Player button on the faceplate to

begin.

2. Press the Source button on the touch-

screen.

3. Change the Source to Bluetooth®.

4. Press the “Add Device” button on the touch-

screen.

5. Search for available devices on your

Bluetooth®-enabled Audio Device. When

prompted on the device, select the

“Uconnect” device and enter the PIN.

304

MULTIMEDIA

6. Uconnect Phone will display an in process

screen while the system is connecting.

7. When the pairing process has successfully

completed, the system will prompt you to

choose whether or not this is your favorite

device. Selecting Yes will make this device

the highest priority. This device will take

precedence over other paired devices

within range.

NOTE:

If No is selected, device priority is determined by

the order in which it was paired. The latest

device paired will have the higher priority.

You can also use the following VR command to

bring up a list of paired audio devices.



“Show Paired Audio Devices.”

Connecting To A Particular Mobile Phone Or

Audio Device
Uconnect Phone will automatically connect to

the highest priority paired phone and/or Audio

Device within range. If you need to choose a

particular Phone or Audio Device follow these

steps:

1. Push the Settings button on the faceplate.

2. Press the Phone/Bluetooth® button on the

touchscreen.

3. Press to select the particular Phone or the

Phone/Audio button on the touchscreen

and then an Audio Device.

4. At the Options pop-up screen press the

Connect Device button on the touchscreen.

5. Press the X button to exit out of the Settings

screen.

Disconnecting A Phone Or Audio Device

1. Push the SETTINGS button on the face-

plate.

2. Press the Phone/Bluetooth® button on the

touchscreen.

3. Select the Phone or Audio Device.

4. At the Options pop-up screen press the

Disconnect Device button on the touch-

screen.

5. Press the X to exit out of the Settings

screen.

Deleting A Phone Or Audio Device

1. Push the Settings button on the faceplate.

2. Press the Phone/Bluetooth® button on the

touchscreen.

3. Select the Phone or Audio Device.

4. At the Options pop-up screen press the

Delete Device button on the touchscreen.

5. Press the X button to exit out of the Settings

screen.

MULTIMEDIA

305

Making A Phone Or Audio Device A Favorite

1. Push the Settings button on the faceplate.

2. Press the Phone/Bluetooth® button on the

touchscreen.

3. Select a different Phone or Audio Device

then the currently connected device.

4. At the Options pop-up screen press the

Make Favorite button on the touchscreen;

you will see the chosen device move to the

top of the list.

5. Press the X button to exit out of the Settings

screen.

Phonebook Download (Automatic Phonebook

Transfer From Mobile Phone) — If Equipped
If equipped and specifically supported by your

phone, Uconnect Phone automatically down-

loads names (text names) and number entries

from the mobile phone’s phonebook. Specific

Bluetooth® Phones with Phone Book Access

Profile may support this feature. See Uconnect

website,

UconnectPhone.com

, for supported

phones.



To call a name from a downloaded mobile

phone book, follow the procedure in the

Voice Recognition Quick Reference section.



Automatic download and update of a phone

book, if supported, begins as soon as the

Bluetooth® wireless phone connection is

made to the Uconnect Phone, for example,

after you start the vehicle.



A maximum of 2,000 entries per phone will

be downloaded and updated every time a

phone is connected to the Uconnect Phone.



Depending on the maximum number of

entries downloaded, there may be a short

delay before the latest downloaded names

can be used. Until then, if available, the previ-

ously downloaded phonebook is available for

use.



Only the phonebook of the currently

connected mobile phone is accessible.



This downloaded phonebook cannot be

edited or deleted on the Uconnect Phone.

These can only be edited on the mobile

phone. The changes are transferred and

updated to Uconnect Phone on the next

phone connection.

Emergency And Towing Assistance
The 911/Help numbers can only be altered.

These can not be deleted or the names can not

be changed.
To change the 911/Help number, follow these

steps:

1. Press the Phonebook button on the touch-

screen from the Phone main screen.

2. Press the 911/Help button on the touch-

screen. Press the appropriate listing to

alter, Emergency for example.

3. Once Emergency is pressed, the Edit button

on the touchscreen appears. Press the Edit

button on the touchscreen and you will be

given the choice to Edit Number or Reset to

Default.

4. Follow the on-screen prompts to complete

the task.

306

MULTIMEDIA

Phone Call Features

The following features can be accessed through

the Uconnect Phone if the feature(s) are avail-

able on your mobile service plan. For example,

if your mobile service plan provides three-way

calling, this feature can be accessed through

the Uconnect Phone. Check with your mobile

service provider for the features that you have.

Ways To Initiate A Phone Call
Listed below are all the ways you can initiate a

phone call with Uconnect Phone.



Redial



Dial by pressing in the number



Voice Commands (Dial by Saying a Number,

Call by Saying a Phonebook Name, Redial, or

Call Back)



Mobile Phonebook



Recent Call Log

NOTE:

All of the above operations except Redial can be

done with one call or less active.

Dial By Saying A Number

1. Push the Phone button to begin.

2. After the “Listening” prompt and the

following beep, say “Dial 248-555-1212.”

3. The Uconnect Phone will dial

248-555-1212.

Call By Saying A Phonebook Name

1. Push the VR button on your steering wheel

to begin.

2. After the “Listening” prompt and the

following beep, say “Call John Doe Mobile.”

3. The Uconnect Phone will dial the number

associated with John Doe, or if there are

multiple numbers it will ask which number

you want to call for John Doe.

Call Controls
The touchscreen allows you to control the

following call features:



Answer



End



Ignore



Hold/Unhold



Mute/Unmute



Transfer the call to/from the phone



Swap two active calls



Join two active calls together

Touch-Tone Number Entry

1. Press the Phone button on the touch-

screen.

2. Press the Dial button on the touchscreen.

3. The Touch-Tone screen will be displayed.

4. Use the numbered buttons on the touch-

screen to enter the number and press Call.

To send a touch tone using Voice Recognition
(VR), push the Voice Command button while

in a call and say “1234#” or you can say “Send

Voicemail Password” if Voicemail password is

stored in your mobile phonebook.

MULTIMEDIA

307

Recent Calls
You may browse up to 34 of the most recent of

each of the following call types:



Incoming Calls



Outgoing Calls



Missed Calls



All Calls

These can be accessed by touching the recent

calls button on the touchscreen on the Phone

main screen.
You can also push the Phone button and say

“Show my incoming calls” from any screen and

the Incoming calls will be displayed.

NOTE:

Incoming can also be replaced with “Outgoing”,

“Recent” or “Missed”.

Answer Or Reject An Incoming Call — No Call

Currently In Progress
When you receive a call on your mobile phone,

the Uconnect Phone will interrupt the vehicle

audio system, if on, and will display a pop-up

showing Answer or Ignore. Press the Answer

button on the touchscreen or push the Phone

button on the steering wheel to accept the

call.

Answer Or Ignore An Incoming Call — Call

Currently In Progress
If a call is currently in progress and you have

another incoming call, you will hear the same

network tones for call waiting that you normally

hear when using your mobile phone. Push the
Phone button on the steering wheel, or press

the answer button on the touchscreen, or caller

ID box, to place the current call on hold and

answer the incoming call.

NOTE:

The Uconnect Phone compatible phones in the

market today do not support rejecting an

incoming call when another call is in progress.

Therefore, the user can only answer an

incoming call or ignore it.

Making A Second Call While Current Call Is In

Progress
To make a second call while you are currently on
a call, push the Voice Command button and

say “Dial” or “Call” followed by the phone

number or phonebook entry you wish to call.

The first call will be on hold while the second call

is in progress. Or you can place a call on hold by

pressing the Hold button on the touchscreen,

then dial a number from the dial-pad, recent

calls or from the phonebooks. To go back to the

first call, refer to “Toggling Between Calls” in

this section. To combine two calls, refer to

“Join Calls” in this section.

Toggling Between Calls
If two calls are in progress (one active and one
on hold), push the Phone button until you

hear a single beep, indicating that the active

and hold status of the two calls have switched.

Only one call can be placed on hold at a time.

Also you can press the Swap button on the

touchscreen, on the Phone main screen.

308

MULTIMEDIA

Join Calls
When two calls are in progress (one active and

one on hold), press the Join Calls button on the

Phone main screen to combine all calls into a

Conference Call.

Call Termination
To end a call in progress, momentarily press the
End button on the touchscreen or the Phone

button. Only the active call(s) will be terminated

and if there is a call on hold, it will become the

new active call. If the active call is terminated by

the far end, a call on hold may not become

active automatically. This is cell phone-depen-

dent.

Redial

1. Press the Redial button on the touch-

screen, or push the Phone button and

after the “Listening” prompt and the

following beep, say “Redial”.

2. The Uconnect Phone will call the last

number that was dialed from your mobile

phone.

Call Continuation
Call continuation is the progression of a phone

call on the Uconnect Phone after the vehicle

ignition key has been switched to OFF.



After the ignition is switched to OFF, a call

can continue on the Uconnect Phone either

until the call ends, or until the vehicle battery

condition dictates cessation of the call on the

Uconnect Phone and transfer of the call to

the mobile phone.

Uconnect Phone Features

Emergency Assistance
If you are in an emergency and the mobile

phone is reachable:



Pick up the phone and manually dial the

emergency number for your area.

If the phone is not reachable and the Uconnect

Phone is operational, you may reach the emer-

gency number as follows:



Push the Phone button to begin.



After the “Listening” prompt and the

following beep, say “Emergency” and the

Uconnect Phone will instruct the paired

mobile phone to call the emergency number.

This feature is supported in the US, Canada,

and Mexico.

NOTE:



The emergency number dialed is based on

the country where the vehicle is purchased

(911 for the US and Canada and 060 for

Mexico). The number dialed may not be appli-

cable with the available mobile service and

area.



The Uconnect Phone slightly lowers your

chances of successfully making a phone call

to the mobile phone directly.

WARNING!

Your phone must be turned on and connected

to the Uconnect Phone to allow use of this

vehicle feature in emergency situations, when

the mobile phone has network coverage and

stays connected to the Uconnect Phone.

MULTIMEDIA

309

Roadside Assistance/Towing Assistance
If you need roadside/towing assistance:



Push the Phone button to begin.



After the “Listening” prompt and the

following beep, say “Roadside Assistance” or

say “Towing Assistance.”

NOTE:

The roadside/towing assistance number dialed

is based on the country where the vehicle is

purchased (1-800-521-2779 for U.S.,

1-800-363-4869 for Canada, 55-14-3454 for

Mexico City and 1-800-712-3040 for outside

Mexico City in Mexico). Please refer to the FCA

US LLC 24-Hour “Roadside Assistance”

coverage details in the Warranty Information

Booklet and on the 24-Hour Roadside

Assistance Card.

Voice Mail Calling
To learn how to access your voice mail, refer to

“Working with Automated Systems.”

Working With Automated Systems
This method is used in instances where one

generally has to push numbers on the mobile

phone keypad while navigating through an auto-

mated telephone system.
You can use your Uconnect Phone to access a

voice mail system or an automated service,

such as a paging service or automated

customer service line. Some services require

immediate response selection. In some

instances, that may be too quick for use of the

Uconnect Phone.
When calling a number with your Uconnect

Phone that normally requires you to enter in a

touch-tone sequence on your mobile phone

keypad, you can utilize the touchscreen or push
the Voice Command button and say the word

“Send” then the sequence you wish to enter.

For example, if required to enter your PIN

followed with a pound, (3 7 4 6 #), you can push
the Voice Command button and say, “Send

3 7 4 6 #.” Saying “Send” followed by a number,

or sequence of numbers, is also to be used for

navigating through an automated customer

service center menu structure, and to leave a

number on a pager.

You can also send stored mobile phonebook

entries as tones for fast and easy access to

voice mail and pager entries. For example, if you

previously created a Phonebook entry and/or

Last Name as “Voice Password,” then if you
push the Voice Command button and say

“Send Voicemail Password,” the Uconnect

Phone will then send the corresponding phone

number associated with the phonebook entry,

as tones over the phone.

NOTE:



The first number encountered for that

contact will be sent. All other numbers

entered for that contact will be ignored.



You may not hear all of the tones due to

mobile phone network configurations. This is

normal.



Some paging and voice mail systems have

system time out settings that are too short

and may not allow the use of this feature.



Pauses, wait or other characters that are

supported by some phones are not

supported over Bluetooth®. These additional

symbols will be ignored when dialing a

numbered sequence.

310

MULTIMEDIA

Barge In — Overriding Prompts
The Voice Command button can be used

when you wish to skip part of a prompt and

issue your voice command immediately. For

example, if a prompt is asking “There are two

numbers with the name John. Say the full
name” you could push the Voice Command

button and say, “John Smith” to select that

option without having to listen to the rest of the

voice prompt.

Voice Response Length
It is possible for you to choose between Brief

and Detailed Voice Response Length.

1. Push the MORE button on the faceplate,

then press the Settings button on the

touchscreen.

2. Press the Display button on the touch-

screen, then scroll down to Voice Response

Length.

3. Select either “Brief” or “Detailed” by

pressing the box next to the selection. A

check-mark will appear to indicate your

selection.

Phone And Network Status Indicators
Uconnect Phone will provide notification to

inform you of your phone and network status

when you are attempting to make a phone call

using Uconnect Phone. The status is given for

network signal strength and phone battery

strength.

Dialing Using The Mobile Phone Keypad
You can dial a phone number with your mobile

phone keypad and still use the Uconnect Phone

(while dialing via the mobile phone keypad, the

user must exercise caution and take precau-

tionary safety measures). By dialing a number

with your connected Bluetooth® mobile phone,

the audio will be played through your vehicle's

audio system. The Uconnect Phone will work the

same as if you dial the number using a voice

command.

NOTE:

Certain brands of mobile phones do not send

the dial ring to the Uconnect Phone to play it on

the vehicle audio system, so you will not hear it.

Under this situation, after successfully dialing a

number the user may feel that the call did not

go through even though the call is in progress.

Once your call is answered, you will hear the

audio.

Mute/Un-Mute (Mute OFF)
When you mute the Uconnect Phone, you will

still be able to hear the conversation coming

from the other party, but the other party will not

be able to hear you. To mute the Uconnect

Phone simply press the Mute button on the

Phone main screen.

Advanced Phone Connectivity

Transfer Call To And From Mobile Phone
The Uconnect Phone allows ongoing calls to be

transferred from your mobile phone to the

Uconnect Phone without terminating the call. To

transfer an ongoing call from your connected

mobile phone to the Uconnect Phone or vice

versa, press the Transfer button on the Phone

main screen.

MULTIMEDIA

311

Connect Or Disconnect Link Between the

Uconnect Phone And Mobile Phone
If you would like to connect or disconnect the

Bluetooth® connection between a Uconnect

Phone paired mobile phone and the Uconnect

Phone, follow the instructions described in your

mobile phone User's Manual.

Things You Should Know About Your

Uconnect Phone

Voice Command
For best performance:



Adjust the rearview mirror to provide at least

½-inch (1 cm) gap between the overhead

console (if equipped) and the mirror.



Always wait for the beep before speaking.



Speak normally without pausing, just as you

would speak to a person sitting a few feet/

meters away from you.



Make sure that no one other than you is

speaking during a Voice Command period.

Performance is maximized under:



Low-to-medium blower setting



Low-to-medium vehicle speed



Low road noise



Smooth road surface



Fully closed windows



Dry weather condition

NOTE:



Even though the system is designed for users

speaking in North American English, French,

and Spanish accents, the system may not

always work for some.



When navigating through an automated

system such as voice mail, or when sending

a page, at the end of speaking the digit string,

make sure to say “Send.”



Storing names in the phonebook when the

vehicle is not in motion is recommended.



It is not recommended to store similar

sounding names in the Uconnect Phonebook.



Phonebook (Downloaded and Uconnect

Phone Local) name recognition rate is opti-

mized when the entries are not similar.



Numbers must be spoken in single digits.

“800” must be spoken “eight-zero-zero” not

“eight hundred.”



You can say “O” (letter “O”) for “0” (zero).



Even though international dialing for most

number combinations is supported, some

shortcut dialing number combinations may

not be supported.

Far End Audio Performance
Audio quality is maximized under:



Low-to-medium blower setting



Low-to-medium vehicle speed



Low road noise



Smooth road surface



Fully closed windows



Dry weather conditions



Operation from the driver's seat



Performance, such as audio clarity, echo,

and loudness to a large degree, relies on the

phone and network, and not the Uconnect

Phone



Echo at the phone far end can sometimes be

reduced by lowering the in-vehicle audio

volume

Dodge Journey (2020 year). Manual in english - page 19