Content .. 15 16 17 18 ..

Dodge Journey (2020 year). Manual in english - page 17

264

TECHNICAL SPECIFICATIONS

While operating on gasoline with an octane

number of 87, hearing a light knocking sound

from the engine is not a cause for concern.

However, if the engine is heard making a heavy

knocking sound, see your dealer immediately.

Use of gasoline with an octane number lower

than 87 can cause engine failure and may void

or not be covered by the New Vehicle Limited

Warranty.
Poor quality gasoline can cause problems such

as hard starting, stalling, and hesitations. If you

experience these symptoms, try another brand

of gasoline before considering service for the

vehicle.

Reformulated Gasoline

Many areas of the country require the use of

cleaner burning gasoline referred to as “Refor-

mulated Gasoline”. Reformulated gasoline

contains oxygenates and are specifically

blended to reduce vehicle emissions and

improve air quality.
The use of reformulated gasoline is recom-

mended. Properly blended reformulated gaso-

line will provide improved performance and

durability of engine and fuel system

components.

Materials Added To Fuel

Besides using unleaded gasoline with the

proper octane rating, gasolines that contain

detergents, corrosion and stability additives are

recommended. Using gasolines that have these

additives will help improve fuel economy,

reduce emissions, and maintain vehicle

performance.

Designated TOP TIER Detergent Gaso-

line contains a higher level of deter-

gents to further aide in minimizing

engine and fuel system deposits.

When available, the usage of TOP TIER Deter-

gent Gasoline is recommended. Visit

www.toptiergas.com

for a list of TOP TIER Deter-

gent Gasoline Retailers.
Indiscriminate use of fuel system cleaning

agents should be avoided. Many of these mate-

rials intended for gum and varnish removal may

contain active solvents or similar ingredients.

These can harm fuel system gasket and

diaphragm materials.

Gasoline/Oxygenate Blends

Some fuel suppliers blend unleaded gasoline

with oxygenates such as ethanol.

Problems that result from using gasoline

containing more than 15% ethanol (E-15) or

gasoline containing methanol are not the

responsibility of the manufacturer and may void

or not be covered under New Vehicle Limited

Warranty.

CAUTION!

DO NOT use E-85, gasoline containing

methanol, or gasoline containing more than

15% ethanol (E-15). Use of these blends may

result in starting and driveability problems,

damage critical fuel system components,

cause emissions to exceed the applicable

standard, and/or cause the Malfunction

Indicator Light to illuminate. Please observe

pump labels as they should clearly

communicate if a fuel contains greater than

15% ethanol (E-15).

TECHNICAL SPECIFICATIONS

265

Do Not Use E-85 In Non-Flex Fuel Vehicles

Non-Flex Fuel Vehicles (FFV) are compatible

with gasoline containing up to 15% ethanol

(E-15). Use of gasoline with higher ethanol

content may void the New Vehicle Limited

Warranty.
If a Non-FFV vehicle is inadvertently fueled with

E-85 fuel, the engine will have some or all of

these symptoms:



Operate in a lean mode.



OBD II Malfunction Indicator Light on.



Poor engine performance.



Poor cold start and cold driveability.



Increased risk for fuel system component

corrosion.

CNG And LP Fuel System Modifications

Modifications that allow the engine to run on

Compressed Natural Gas (CNG) or Liquid

Propane (LP) may result in damage to the

engine, emissions, and fuel system compo-

nents. Problems that result from running CNG

or LP are not the responsibility of the manufac-

turer and may void or not be covered under the

New Vehicle Limited Warranty.

MMT In Gasoline

Methylcyclopentadienyl Manganese Tricarbonyl

(MMT) is a manganese-containing metallic addi-

tive that is blended into some gasoline to

increase octane. Gasoline blended with MMT

provides no performance advantage beyond

gasoline of the same octane number without

MMT. Gasoline blended with MMT reduces

spark plug life and reduces emissions system

performance in some vehicles. The manufac-

turer recommends that gasoline without MMT

be used in your vehicle. The MMT content of

gasoline may not be indicated on the gasoline

pump; therefore, you should ask your gasoline

retailer whether the gasoline contains MMT.

MMT is prohibited in Federal and California

reformulated gasoline.

266

TECHNICAL SPECIFICATIONS

(Continued)

Fuel System Cautions

NOTE:

Intentional tampering with the emissions

control system can result in civil penalties being

assessed against you.

Carbon Monoxide Warnings

CAUTION!

Follow these guidelines to maintain your

vehicle’s performance:



The use of leaded gasoline is prohibited by

Federal law. Using leaded gasoline can

impair engine performance and damage

the emissions control system.



An out-of-tune engine or certain fuel or igni-

tion malfunctions can cause the catalytic

converter to overheat. If you notice a

pungent burning odor or some light smoke,

your engine may be out of tune or malfunc-

tioning and may require immediate service.

Contact an authorized dealer for service

assistance.



The use of fuel additives, which are now

being sold as octane enhancers, is not

recommended. Most of these products

contain high concentrations of methanol.

Fuel system damage or vehicle perfor-

mance problems resulting from the use of

such fuels or additives is not the responsi-

bility of the manufacturer and may void or

not be covered under the New Vehicle

Limited Warranty.

CAUTION!

(Continued)

WARNING!

Carbon monoxide (CO) in exhaust gases is

deadly. Follow the precautions below to

prevent carbon monoxide poisoning:



Do not inhale exhaust gases. They contain

carbon monoxide, a colorless and odorless

gas, which can kill. Never run the engine in

a closed area, such as a garage, and never

sit in a parked vehicle with the engine

running for an extended period. If the

vehicle is stopped in an open area with the

engine running for more than a short

period, adjust the ventilation system to

force fresh, outside air into the vehicle.



Guard against carbon monoxide with

proper maintenance. Have the exhaust

system inspected every time the vehicle is

raised. Have any abnormal conditions

repaired promptly. Until repaired, drive with

all side windows fully open.

TECHNICAL SPECIFICATIONS

267

FLUID CAPACITIES

Metric

Fuel (Approximate)
Front Wheel Drive (FWD) Models

20.5 Gallons

77.6 Liters

Engine Oil With Filter
2.4L Engine (SAE 5W-20, API Certified)

4.5 Quarts

4.26 Liters

Cooling System*
2.4L Engine and Single or Dual-Zone Climate Control System (Mopar Antifreeze/Engine

Coolant 10 Year/150,000 Mile Formula)

8 Quarts

7.5 Liters

2.4L Engine and Three-Zone Climate Control System (Mopar Antifreeze/Engine Coolant

10 Year/150,000 Mile Formula)

10 Quarts

9.5 Liters

* Includes heater and coolant recovery bottle filled to MAX level.

268

TECHNICAL SPECIFICATIONS

FLUIDS AND LUBRICANTS

Engine

Component

Fluid, Lubricant, or Genuine Part

Engine Coolant

We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000

Mile Organic Additive Technology (OAT) Formula.

Engine Oil

We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the

requirements of FCA Material Standard MS-6395 such as Mopar,

Pennzoil, and Shell Helix. Refer to your engine oil filler cap for correct SAE

grade.

Engine Oil Filter

We recommend you use Mopar Engine Oil Filter.

Spark Plugs

We recommend you use Mopar Spark Plugs.

Fuel Selection

87 Octane (R+M)/2, 0-15% Ethanol.

TECHNICAL SPECIFICATIONS

269

(Continued)

CAUTION!



Mixing of engine coolant (antifreeze) other

than specified Organic Additive Technology

(OAT) engine coolant (antifreeze), may

result in engine damage and may decrease

corrosion protection. OAT engine coolant is

different and should not be mixed with

Hybrid Organic Additive Technology (HOAT)

engine coolant (antifreeze) or any “globally

compatible” coolant (antifreeze). If a

non-OAT engine coolant (antifreeze) is

introduced into the cooling system in an

emergency, the cooling system will need to

be drained, flushed, and refilled with fresh

OAT coolant (conforming to MS.90032), by

an authorized dealer as soon as possible.



Do not use water alone or alcohol-based

engine coolant (antifreeze) products. Do

not use additional rust inhibitors or antirust

products, as they may not be compatible

with the radiator engine coolant and may

plug the radiator.

CAUTION!

(Continued)



This vehicle has not been designed for use

with propylene glycol-based engine coolant

(antifreeze). Use of propylene glycol-based

engine coolant (antifreeze) is not

recommended.

CAUTION!

(Continued)

270

TECHNICAL SPECIFICATIONS

Chassis

Component

Fluid, Lubricant, or Genuine Part

Automatic Transmission

Use only ATF+4 Automatic Transmission Fluid.

Failure to use ATF+4 fluid may affect the function or performance of your

transmission.

We recommend Mopar ATF+4 fluid.

Brake Master Cylinder

We recommend you use Mopar DOT 3, SAE J1703.

Power Steering Reservoir

We recommend you use Mopar Power Steering Fluid+4, or Mopar

ATF+4 Automatic Transmission Fluid.

271

MULTIMEDIA

CYBERSECURITY

Your vehicle may be a connected vehicle and

may be equipped with both wired and wireless

networks. These networks allow your vehicle to

send and receive information. This information

allows systems and features in your vehicle to

function properly.
Your vehicle may be equipped with certain secu-

rity features to reduce the risk of unauthorized

and unlawful access to vehicle systems and

wireless communications. Vehicle software

technology continues to evolve over time and

FCA US LLC, working with its suppliers, evalu-

ates and takes appropriate steps as needed.

Similar to a computer or other devices, your

vehicle may require software updates to

improve the usability and performance of your

systems or to reduce the potential risk of unau-

thorized and unlawful access to your vehicle

systems.
The risk of unauthorized and unlawful access to

your vehicle systems may still exist, even if the

most recent version of vehicle software (such as

Uconnect software) is installed.

NOTE:



FCA US LLC or your dealer may contact you

directly regarding software updates.



To help further improve vehicle security and

minimize the potential risk of a security

breach, vehicle owners should:



Routinely check

www.driveuconnect.com/

support/software-update.html

(US Resi-

dents) or

www.driveuconnect.ca

(Cana-

dian Residents) to learn about available

Uconnect software updates.



Only connect and use trusted media

devices (e.g. personal mobile phones,

USBs, CDs).

Privacy of any wireless and wired communica-

tions cannot be assured. Third parties may

unlawfully intercept information and private

communications without your consent. For

further information, refer to “Onboard Diag-

nostic System (OBD II) Cybersecurity” in

“Getting To Know Your Instrument Panel”.

WARNING!



It is not possible to know or to predict all of

the possible outcomes if your vehicle’s

systems are breached. It may be possible

that vehicle systems, including safety

related systems, could be impaired or a

loss of vehicle control could occur that may

result in an accident involving serious injury

or death.



ONLY insert media (e.g., USB, SD card, or

CD) into your vehicle if it came from a

trusted source. Media of unknown origin

could possibly contain malicious software,

and if installed in your vehicle, it may

increase the possibility for vehicle systems

to be breached.



As always, if you experience unusual

vehicle behavior, take your vehicle to your

nearest authorized dealer immediately.

272

MULTIMEDIA

UCONNECT SETTINGS

The Uconnect system uses a combination of

buttons on the touchscreen and buttons on the

faceplate located on the center of the instru-

ment panel that allows you to access and

change the Customer Programmable Features.

Customer Programmable Features — Radio

4.3 Settings

In this mode the Uconnect system allows you to

access programmable features that may be

equipped such as Display, Clock, Safety &

Driving Assistance, Lights, Doors & Locks,

Auto-On Comfort & Remote Start, Engine Off

Options, Audio, Phone/Bluetooth®, and

SiriusXM® Setup through buttons on the

faceplate and touchscreen.

NOTE:

Only one touchscreen area may be selected at

a time.

Radio 4.3 Buttons On The Faceplate and Touchscreen

Push the SETTINGS button on the faceplate to

access the Settings screen, use the Page Up or

Page Down buttons on the touchscreen to scroll

through the following settings. Press the

desired setting button on the touchscreen to

change the setting using the description shown

on the following pages for each setting.

1 — Uconnect Buttons On The Faceplate
2 — Uconnect Buttons On The Touchscreen

MULTIMEDIA

273

Display

After pressing the Display button on the touchscreen, the following settings will be available:

Setting Name

Selectable Options

Brightness

–

NOTE:

The “Brightness” setting can also be adjusted by selecting any point on the scale between the + and – buttons on the touchscreen.

Mode

Day

Night

Auto

Language

English

Français

Español

NOTE:

When in the “Language” feature, you may select one of three languages for all display nomenclature.

Units

Metric

Voice Response

Brief

Long

Touchscreen Beep

Off

274

MULTIMEDIA

Clock

After pressing the Clock button on the touchscreen, the following settings will be available:

Safety & Driving Assistance

After pressing the Safety & Driving Assistance button on the touchscreen, the following settings will be available:

Setting Name

Selectable Options

Set Time and Format

12 hr

24 hr

NOTE:

Within the “Set Time and Format” setting, press the corresponding Arrow buttons on the touchscreen to adjust to the correct time.

Show Time Status — If Equipped

Off

Sync Time — If Equipped

Off

Setting Name

Selectable Options

Rear Park Assist — If Equipped

Off

Sound Only

Sound & Display

NOTE:

The Rear Park Assist system scans for and alerts the driver of objects behind the vehicle when the transmission gear selector is in REVERSE and the

vehicle speed is less than 11 mph (18 km/h).

MULTIMEDIA

275

Lights

After pressing the Lights button on the touchscreen, the following settings will be available:

ParkView Backup Camera

Off

NOTE:

Your vehicle may be equipped with the ParkView Back Up Camera that allows you to see an on-screen image of the rear surroundings of your vehicle

whenever the gear selector is put into REVERSE. The image will be displayed on the radio touchscreen display along with a caution note to “check

entire surroundings” across the top of the screen. After five seconds, this note will disappear. The ParkView camera is located on the rear of the

vehicle above the rear license plate.

Hill Start Assist — If Equipped

Off

Setting Name

Selectable Options

Setting Name

Selectable Options

Headlight Off Delay — If Equipped

0 sec

30 sec

60 sec

90 sec

NOTE:

When the “Headlight Off Delay” feature is selected, it allows the adjustment of the amount of time the headlights remain on after the engine is shut off.

Headlights With Wipers — If Equipped

Off

Headlight Illuminated Approach

0 sec

30 sec

60 sec

90 sec

NOTE:

When this feature is selected, it allows the adjustment of the amount of time the headlights remain on after the doors are unlocked with the key fob.

276

MULTIMEDIA

Doors & Locks

After pressing the Doors & Locks button on the touchscreen, the following settings will be available:

Auto High Beams — If Equipped

Off

NOTE:

When the “Automatic High Beams” is selected, the high beam headlights will activate/deactivate automatically under certain conditions.

Daytime Running Lights

Off

NOTE:

When the “Daytime Running Lights” feature is selected, the daytime running lights can be turned On or Off. This feature is only available if allowed by

law in the country of the vehicle purchase.

Steering Directed Lights — If Equipped

Off

NOTE:

When the “Steering Directed Lights” feature is selected, the headlights will turn relative to a change in direction of the steering wheel.

Flash Lights With Lock

Off

Setting Name

Selectable Options

Setting Name

Selectable Options

Auto Door Locks

Off

NOTE:

The “Auto Door Locks” feature locks all doors automatically when the vehicle reaches a speed of 15 mph (24 km/h).

MULTIMEDIA

277

Auto Unlock On Exit

Off

NOTE:

When the “Auto Unlock On Exit” feature is selected, all doors will unlock when the vehicle is stopped and the transmission is in the PARK or NEUTRAL

position and the driver's door is opened.

Flash Lights With Lock

Off

Sound Horn With Lock

Off

Sound Horn With Remote Start

Off

Passive Entry (Keyless Enter-N-Go) — If

Equipped

Off

Remote Door Unlock Order

Driver

All

NOTE:

When “Driver” is programmed, only the driver's door will unlock on the first push of the key fob unlock button. You must push the key fob unlock button

twice to unlock the passengers’ doors. When “All” is programmed, all of the doors will unlock on the first press of the key fob unlock button. If “All” is

programmed, all doors will unlock no matter which Passive Entry equipped door handle is grasped. If “Driver” is programmed, only the driver’s door

will unlock when the driver’s door is grasped. Touching the handle more than once will only result in the driver’s door opening once. If the driver’s

door is opened, the interior door lock/unlock switch can be used to unlock all doors (or use the key fob).

Setting Name

Selectable Options

278

MULTIMEDIA

Auto-On Comfort & Remote Start

After pressing the Auto-On Comfort & Remote Start button on the touchscreen, the following settings will be available:

Engine Off Options

After pressing the Engine Off Options button on the touchscreen, the following settings will be available:

Setting Name

Selectable Options

Auto-On Driver Heated Seat & Steering Wheel

With Vehicle Start — If Equipped

Off

NOTE:

When this feature is selected, the driver’s heated seat and heated steering wheel (if equipped) will automatically turn on when temperatures are

below 40°F (4.4°C).

Setting Name

Selectable Options

Engine Off Power Delay

0 sec

45 sec

5 min

10 min

NOTE:

When the “Engine Off Power Delay” feature is selected, the power window switches, radio, Uconnect phone system (if equipped), DVD video system

(if equipped), power sunroof (if equipped), and power outlets will remain active for up to 10 minutes after the ignition is cycled to OFF. Opening either

front door will cancel this feature.

Headlight Off Delay

0 sec

30 sec

60 sec

90 sec

NOTE:

When the “Headlight Off Delay” feature is selected, it allows the adjustment of the amount of time the headlights remain on after the engine is shut off.

MULTIMEDIA

279

Audio

After pressing the Audio button on the touchscreen, the following settings will be available:

Setting Name

Selectable Options

Equalizer

Bass

Mid

Treble

NOTE:

When in this display you may adjust the “Bass”, “Mid”, and “Treble” settings. Adjust the settings with the + and – setting buttons on the touchscreen

or by selecting any point on the scale between the + and – buttons on the touchscreen. Bass/Mid/Treble also allow you to simply slide your finger up

or down to change the setting as well as press directly on the desired setting.

Balance/Fade

Up Arrow

Button

Down Arrow

Button

Left Arrow

Button

Right Arrow

Button

Center C Button

NOTE:

When in this display you may adjust the “Balance/Fade” of the audio by using the Arrow button on the touchscreen to adjust the sound level from the

front and rear or right and left side speakers. Press the Center C Button on the touchscreen to reset the balance and fade to the factory setting.

Speed Adjusted Volume

Off

Music Info Cleanup

Off

NOTE:

The “Music Info Cleanup” feature helps organize music files for optimized music navigation.

Surround Sound — If Equipped

Off

Content .. 15 16 17 18 ..