Dodge Charger (2019 year). Manual

Lights

After pressing the “Lights” button on the touchscreen, the
following settings will be available:

Setting Name

Selectable Options

Headlight Off Delay

Headlight Illumination On

Approach

Headlights With Wipers —

If Equipped

Off

Auto Dim High Beams —

If Equipped

Off

Daytime Running Lights —

If Equipped

Off

Steering Directed Lights —

If Equipped

Off

Flash Lights With Lock

Off

MULTIMEDIA

477

Doors & Locks

After pressing the “Doors & Locks” button on the touch-
screen, the following settings will be available:

Setting Name

Selectable Options

Auto Door Locks — If Equipped

Off

Auto Unlock On Exit

Off

NOTE:
When the “Auto Unlocks On Exit” feature is selected, all doors unlock when the vehicle is stopped, the transmission
is in the PARK or NEUTRAL position and the driver’s door is opened.

Flash Lights With Lock

Off

NOTE:
When the “Flash Lights With Lock” feature is selected, the exterior lights flash when the doors are locked or unlocked
with the key fob, or when using the passive entry feature. This feature may be selected with or without the “Sound Horn
on Lock” feature selected.

Sound Horn With Lock

Off

1st Press

2nd Press

Sound Horn With Remote Start —

If Equipped

Off

478

MULTIMEDIA

Setting Name

Selectable Options

1st Press Of Key Fob Unlocks

Driver Door

All Doors

NOTE:

• When ⬙Driver Door⬙ is selected with 1st Press Of Key Fob Unlocks, only the driver’s door unlocks with the first

press of the key fob unlock button. You must press the key fob unlock button twice to unlock the passenger’s
doors. When

⬙All Doors⬙ is selected for 1st Press Of Key Fob Unlocks, all doors unlock on the first press of the key

fob unlock button.

• If the vehicle is programmed 1st Press Of Key Fob Unlocks “All Doors,” all doors unlock no matter which Passive

Entry equipped door handle is grasped. If 1st Press Of Key Fob Unlocks “Driver Door” is programmed, only the
driver’s door unlocks when the driver’s door is grasped. With Passive Entry, if 1st Press Of Key Fob Unlocks
“Driver Door” is programmed, touching the handle more than once results in only the driver’s door opening.
If “Driver Door” is selected, once the driver door is opened, the interior door lock/unlock switch can be used to
unlock all doors (or use key fob).

Passive Entry — If Equipped

Off

NOTE:
The “Passive Entry” feature allows you to lock and unlock the vehicles door(s) without having to push the key fob
lock or unlock buttons. To make your selection, press the “Passive Entry” button on the touchscreen, until a check-
mark appears next to the setting, showing that the setting has been selected.

MULTIMEDIA

479

Setting Name

Selectable Options

Personal Settings Linked To Key

Fob — If Equipped

Off

NOTE:

• This feature provides automatic recall of all settings stored to a memory location (driver’s seat, exterior mirrors,

power steering column position and radio station pre-sets) to enhance driver mobility when entering and exiting
the vehicle.

• The seat returns to the memorized seat location (if Personal Settings Linked to Key Fob is set to on) when the key

fob is used to unlock the door.

Auto-On Comfort Systems — If Equipped

After pressing the “Auto-On Comfort” button on the
touchscreen, the following settings will be available:

Setting Name

Selectable Options

Auto-On Dr Heat Seat

Off

Remote Start

All Starts

NOTE:
When this feature is selected the driver’s heated seat and heated steering wheel will automatically turn on when tem-
peratures are below 40° F (4.4° C). When temperatures are above 80° F (26.7° C) the driver vented seat will turn on.

480

MULTIMEDIA

Key Off Options

After pressing the “Key Off Options” button on the touch-
screen, the following settings will be available:

Setting Name

Selectable Options

Easy Exit Seat — If Equipped

Off

NOTE:
When the “Easy Exit Seat” feature is selected, the driver’s seat will automatically move rearward once the engine is
shut off.

Key Off Power Delay

0 sec

45 sec

5 mins

10 mins

NOTE:
When the “Key Off Power Delay” feature is selected, the power window switches, radio, Uconnect Phone system
(if equipped), DVD video system (if equipped), power sunroof (if equipped), and power outlets will remain active for
up to ten minutes after the ignition is cycled to OFF. Opening either front door will cancel this feature. To change the
Key Off Power Delay setting, press the “+” or “-” button on the touchscreen to select your desired time interval, and
choose from “0 seconds,” “45 seconds,” “5 minutes” or “10 minutes.”

MULTIMEDIA

481

Setting Name

Selectable Options

Headlight Off Delay

0 sec

30 sec

60 sec

90 sec

NOTE:
When the “Headlight Off Delay” feature is selected, the driver can choose to have the headlights remain on for 0, 30,
60, or 90 seconds when exiting the vehicle. To change the Headlight Off Delay status press the “+” or “–” button on
the touchscreen to select your desired time interval.

Audio

After pressing the “Audio” button on the touchscreen, the
following settings will be available:

Setting Name

Selectable Options

Balance/Fade

“Speaker” Icon

Arrow Buttons

NOTE:
The “Balance/Fade” feature allows you to adjust the Balance and Fade settings. Press and drag the speaker icon, use
the arrows to adjust, or tap the “Speaker” icon to readjust to the center.

482

MULTIMEDIA

Setting Name

Selectable Options

Equalizer

–

NOTE:

• The “Equalizer” feature allows you to adjust the Bass, Mid and Treble settings. Adjust the settings with the “+”

and “–” setting buttons on the touchscreen or by selecting any point on the scale between the “+” and “–” buttons
on the touchscreen.

• Bass/Mid/Treble allow you to simply slide your finger up or down to change the setting as well as press directly

on the desired setting.

Speed Adjusted Volume

Off

NOTE:
The “Speed Adjusted Volume” feature increases or decreases volume relative to vehicle speed. To change the Speed
Adjusted Volume press the “Off,” “1,” “2” or “3” button on the touchscreen.

Surround Sound — If Equipped

Off

NOTE:
The “Surround Sound” feature provides simulated surround sound mode. To make your selection, press the “Sur-
round Sound” button on the touchscreen, select “On” or “Off.”

MULTIMEDIA

483

Setting Name

Selectable Options

AUX Volume Offset — If Equipped

-3

NOTE:
The “AUX Volume Offset” feature provides the ability to tune the audio level for portable devices connected through
the AUX input. To make your selection, press the AUX Volume Match button on the touchscreen, choose a level from
–3 to +3.

Auto Play

Off

NOTE:
The “Auto Play” feature allows a media device to begin playing when the media device is plugged in. To make your
selection, press the On or Off buttons to activate or deactivate Auto Play.

Phone/Bluetooth Settings

After pressing the “Phone/Bluetooth Settings” button on
the touchscreen, the following settings will be available:

Setting Name

Selectable Options

Do Not Disturb

List of Settings

NOTE:
Press “Do Not Disturb” to access the available settings. The following settings are: Auto Reply (both, text, call), Auto
Reply Message (custom, default), and Custom Auto Reply Message (create message).

484

MULTIMEDIA

Setting Name

Selectable Options

Paired Phones and Audio Sources

List Of Paired Phones and Audio Sources

NOTE:
The “Paired Phones and Audio Sources” feature shows which phones and audio sources are paired to the Phone and
Audio Sources Settings system. For further information, refer to the Uconnect Owner’s Manual Supplement.

Smartphone Projection Manager

Off

NOTE:

Pressing “Smartphone Projection Manager” feature allows you to see a list of all connected phones and gives

you the option to determine which phone will be used for projection (Apple CarPlay or Android Auto).

SiriusXM Setup — If Equipped

After pressing the “SiriusXM Setup” button on the touch-
screen, the following settings will be available:

Setting Name

Selectable Options

Tune Start

Off

Channel Skip

Name of Channel

NOTE:

SiriusXM can be programmed to skip channels. To make your selection, press the “Channel Skip” button on

the touchscreen, select the channels you would like to skip.

MULTIMEDIA

485

Setting Name

Selectable Options

Subscription Information

Subscription Info

NOTE:
New vehicle purchasers or lessees will receive a free limited time subscription to SiriusXM Satellite Radio with your
radio. Following the expiration of the free services, it will be necessary to access the information on the Subscription
Information screen to re-subscribe.

1. Press the “Subscription Info” button on the touchscreen to access the Subscription Information screen.

2. Write down the SIRIUS ID numbers for your receiver. To reactivate your service, either call the number listed on the

screen or visit the provider online.

SiriusXM Travel Link is a separate subscription.

Reset

After pressing the “Reset” button on the touchscreen, the
following settings will be available:

Setting Name

Selectable Options

Reset App Drawer to Default

Cancel

Restore Apps

Cancel

Restore Settings to Default

Cancel

486

MULTIMEDIA

Setting Name

Selectable Options

NOTE:
When this feature is selected, it will reset all of the radio features to their default settings. To restore the settings to
their default setting, press the “Restore Settings” button on the touchscreen. A pop-up will appear asking

⬙Are you

sure you want to reset your settings to default?”

Clear Personal Data

Cancel

NOTE:
When this feature is selected, it will remove all personal data including Bluetooth devices and presets. To remove per-
sonal information, press the “Clear Personal Data” button and a pop-up will appear asking

⬙Are you sure you want

to clear all personal data?”

Modem Reset

Cancel

System Information
After pressing the “System Information” button on the
touchscreen, the following settings will be available:

Setting Name

Selectable Options

Software License

System Software Information Screen

NOTE:

When the “Software License” feature is selected, a “System Software Information” screen will appear, displaying the
system software version. You can also update your maps with a USB device. Please see your authorized dealer for
further information.

MULTIMEDIA

487

Performance Pages — If Equipped

Performance Pages is an application that provides a dis-
play for performance indicators, as received from the
instrument cluster, that will help you gain familiarity with
the capabilities of your vehicle in real-time.

To access the Performance Pages, press the “Apps” button
on the touchscreen then press the “Performance Pages”
button on the touchscreen. Press the desired button on the
touchscreen to access that specific Performance Page.

WARNING!

Measurement of vehicle statistics with the Perfor-
mance Pages is intended for off-highway or off-road
use only and should not be done on any public
roadways. It is recommended that these features be
used in a controlled environment and within the limits
of the law. The capabilities of the vehicle as measured
by the Performance Pages must never be exploited in a
reckless or dangerous manner, which can jeopardize
the user’s safety or the safety of others. Only a safe,
attentive, and skillful driver can prevent accidents.

The Performance Pages include the following:
• Home
• Timers
• Gauges
• G-Force
• Engine
• Dyno
If a USB drive is installed in the media hub, press the
Camera icon on the top right of the touchscreen when
using Performance Pages. A screen shot of the page will be
taken and saved onto the USB.

488

MULTIMEDIA

The following describes each feature and its operation:

Home

When Home is selected, a series of widgets (gauges) can be
customized by the user. Follow these steps to change a
widget:

1. Press any of the gauges to change them.

2. Press the gear icon and select the following option from

the menu:

• Set Widget: Top Left
• Set Widget: Top Right
• Set Widget: Bottom Left
• Set Widget: Bottom Right

3. After selecting a Widget location: select the gauge to

display:

• Gauge: Oil Temp
• Gauge: Oil Pressure
• Gauge: Coolant Temp
• Gauge: Battery Voltage
• Gauge: Trans Temp — If Equipped with an Automatic

Transmission

• Gauge: Boost Pressure — If Equipped
• Gauge: Air/Fuel Ratio — If Equipped

Performance Pages — Home

MULTIMEDIA

489

• Gauge: I/C Coolant Temp — If Equipped
• Gauge: Intake Air Temp
• Gauge: Engine Torque
• Gauge: Engine Power
• Gauge: G-Force
• Gauge: Steering Angle
• Gauge: Current Gear
• Gauge: Current Speed
• Timer: 0-60 MPH
• Timer: 0-100 MPH
• Timer: 1/8 Mile
• Timer: 1/4 Mile
• Timer: Brake Distance
• Timer: Reaction Time

Timers

Performance Pages — Timers

490

MULTIMEDIA

When the Timers Page is selected, you will be able to select
from following “Tickets”:
• Current

Pressing the “Current” button displays a “real time” sum-
mary of performance timers.
• Last

Pressing the “Last” button displays the last recorded run of
performance timers.
• Best

Pressing the “Best” button displays the best recorded run
of performance timers, except for braking data.
• Save

Pressing the “Save” button will let you save the visible
page, current/last/best. Any saved run over ten will
overwrite the last saved run for Uconnect System storage.
The operation of the Save feature is listed below:

• With a USB jump drive installed, press the “USB” button

to save to the jump drive.

• Press the “Uconnect” button to save the runs to the

Owner web page.

• Press the “Cancel” button to view the last timer “Ticket”.

Performance Pages — Save

MULTIMEDIA

491

The “Tickets” contain the timers listed below:
• Reaction Time

Measures the driver’s reaction time for launching the
vehicle against a simulated drag strip timing light (behav-
ior modeled after 500 Sportsman Tree) displayed in the
instrument cluster display.

NOTE:

The Reaction Time, MPH, ⅛ and ¼ Mile timers will

be “ready” when the vehicle is at 0 MPH (0 km/h).
• 0-60 MPH (0-100 km/h)

Displays the time it takes for the vehicle to go from 0 to
60 mph (0 to 100 km/h).
• 0-100 MPH (0-160 km/h)

Displays the time it takes for the vehicle to go from 0 to
100 mph (0 to 160 km/h).
• ⅛ Mile (200 meter) ET

Displays the time it takes for the vehicle to go an ⅛ mile
(200 meters).
• ⅛ Mile (200 meter) MPH

Displays the vehicle speed at the time ⅛ mile (200 meters)
was reached.

• ¼ Mile (400 meter) ET

Displays the time it takes for the vehicle to go ¼ mile
(400 meters).
• ¼ Mile (400 meter) MPH

Displays the speed the vehicle was at when ¼ mile
(400 meters) was reached.
• Brake Distance ft

Displays the distance it takes the vehicle to make a full
stop.

NOTE:

The distance measurement will be aborted if the

brake pedal is released or the parking brake is engaged,
before the vehicle comes to a complete stop.
• Brake from MPH

Displays the speed the vehicle is traveling when the brake
pedal is pressed.

NOTE:

Brake Distance and Speed timers only displays

⬙ready⬙ when vehicle is traveling at greater than 30 MPH
(48 km/h).

492

MULTIMEDIA

Dodge Charger (2019 year). Manual - part 30