Dodge Charger (2019 year). Manual

Setting Name

Selectable Options

Balance/Fade

Arrow Buttons

“C” icon

NOTE:
The “Balance/Fade” feature allows you to adjust the Balance and Fade settings. Press and drag the speaker icon or
use the arrows to adjust, tap the “C” icon to readjust to the center.

Speed Adjusted Volume

Off

NOTE:
The “Speed Adjusted Volume” feature increases or decreases volume relative to vehicle speed. To change the Speed
Adjusted Volume press the “Speed Adjusted Volume” button on the touchscreen and select from “Off,” “1,” “2” or
“3” buttons on the touchscreen.

Surround Sound — If Equipped

Off

NOTE:
The “Surround Sound” feature provides simulated surround sound mode. To make your selection, press the “Sur-
round Sound” button on the touchscreen, and select “On” or “Off.”

AUX Volume Offset — If Equipped

–

NOTE:
The “AUX Volume Offset” feature provides the ability to tune the audio level for portable devices connected through the
AUX input. To make your selection, press the “AUX Volume Offset” button on the touchscreen, select “+” and “–”.

MULTIMEDIA

461

Setting Name

Selectable Options

Auto Play — If Equipped

Off

NOTE:

The Auto Play feature allows a media device to begin playing when the media device is plugged in. To make

your selection, press the On or Off buttons to activate or deactivate Auto Play.

Phone/Bluetooth

After pressing the “Phone/Bluetooth” button on the touch-
screen, the following settings will be available:

Setting Name

Selectable Options

Do Not Disturb

List of Settings

NOTE:

Press “Do Not Disturb” to access the available settings. The following settings are: Auto Reply (both, text,

call), Auto Reply Message (custom, default), and Custom Auto Reply Message (create message).

Paired Phones/Devices

List of Paired Phones/Devices

NOTE:
This feature shows which phones are paired to the Phone/Bluetooth system. For further information, refer to the
Uconnect Owner’s Manual Supplement.

462

MULTIMEDIA

SiriusXM Setup — If Equipped

After pressing the “SiriusXM Setup” button on the touch-
screen, the following settings will be available:

Setting Name

Selectable Options

Tune Start

Off

Channel Skip

Name of Channel

NOTE:

SiriusXM can be programmed to skip channels. To make your selection, press the “Channel Skip” button on

the touchscreen, select the channels you would like to skip.

Subscription Information

Subscription Info

NOTE:
New vehicle purchasers or lessees will receive a free limited time subscription to SiriusXM Satellite Radio with your
radio. Following the expiration of the free services, it will be necessary to access the information on the Subscription
Information screen to re-subscribe.

1. Press the “Subscription Info” button on the touchscreen to access the Subscription Information screen.

2. Write down the SIRIUS ID numbers for your receiver. To reactivate your service, either call the number listed on the

screen or visit the provider online.

MULTIMEDIA

463

Restore Settings

After pressing the “Restore Settings” button on the touch-
screen, the following settings will be available:

Setting Name

Selectable Options

Restore Settings

Yes

Cancel

NOTE:
When the “Restore Settings” feature is selected it will reset the Display, Clock, Audio, and Radio Settings to their default
settings. If “Yes” is selected, a pop-up will appear asking

⬙Are you sure you want to reset your settings to default?” Select

“Yes” to restore, or “Cancel” to exit.

Reset App Drawer to Default Order

Cancel

NOTE:
When this feature is selected, it will reset all settings to their default settings. To restore the settings to their default
setting, press the “Restore Settings” button on the touchscreen. A pop-up will appear asking

⬙Are you sure you want

to reset your settings to default?”

Restore Apps

Cancel

Clear Personal Data

Yes

Cancel

NOTE:

When the “Clear Personal Data” feature is selected it will remove all personal data including Clock, Audio,

Radio, Bluetooth devices, Apps, and Favorites.

Modem Reset

Cancel

464

MULTIMEDIA

Clear Personal Data

After pressing the “Clear Personal Data Settings” button on
the touchscreen, the following settings will be available:

Setting Name

Selectable Options

Clear Personal Data

Yes

Cancel

NOTE:
When this feature is selected it will remove all personal data including Bluetooth devices and presets. If “Yes” is selected
a pop-up will appear asking

⬙Are you sure you want to clear all personal data?” select “Yes” to Clear, or “Cancel” to exit.

System Information

After pressing the “System Information” button on the
touchscreen, the following settings will be available:

Setting Name

Selectable Options

Software License

System Software Information Screen

NOTE:
When the “Software License” feature is selected, a “System Software Information” screen will appear, displaying the
system software version. You can also update your maps with a USB device. Please see your authorized dealer for
further information.

MULTIMEDIA

465

Customer Programmable Features — Uconnect
4C/4C NAV Settings

Press the “Apps

” button (if equipped), and then press

the “Settings” button on the touchscreen to display the
menu setting screen. In this mode, the Uconnect system
allows you to access programmable features that may be
equipped such as Language, Display, Units, Voice, Clock
& Date, Safety & Driving Assistance, Mirrors & Wipers,
Lights, Doors & Locks, Auto-On Comfort, Key Off
Options, Audio, Phone/Bluetooth, SiriusXM Setup, Reset,
and System Information.

NOTE:

Depending on the vehicle’s options, feature set-

tings may vary.

When making a selection, press the button on the touch-
screen to enter the desired mode. Once in the desired
mode, press and release the preferred setting “option” until
a check-mark appears next to the setting, showing that
setting has been selected. Once the setting is complete,
press the “X” button on the touchscreen to close out of the
settings screen. Pressing the up or down arrow button on
the right side of the screen will allow you to toggle up or
down through the available settings.

Language

After pressing the “Language” button on the touchscreen,
the following settings will be available:

Setting Name

Selectable Options

Set Language

English

Français

Español

Display

After pressing the “Display” button on the touchscreen, the
following settings will be available:

Setting Name

Selectable Options

Display Mode

Auto

Manual

466

MULTIMEDIA

Setting Name

Selectable Options

Display Brightness With Headlights

–

NOTE:

• When in the “Display Brightness With Headlights ON” display, you may select the brightness with the headlights on.

• To make changes to the ⬙Display Brightness With Headlights ON⬙ setting, the headlights must be on and the inte-

rior dimmer switch must not be in the

⬙party⬙ or ⬙parade⬙ positions.

Display Brightness With Headlights

OFF

–

NOTE:

• When in the “Display Brightness With Headlights OFF” display, you may select the brightness with the headlights

off. Adjust the brightness from (1–10) with the “+” and “–” buttons on the touchscreen.

• To make changes to the ⬙Display Brightness With Headlights OFF⬙ setting, the headlights must be off and the inte-

rior dimmer switch must not be in the

⬙party⬙ or ⬙parade⬙ positions.

Set Theme

List Of Themes

NOTE:
When in the “Set Theme” display, you may select the theme for the display screen. To make your selection, press the

⬙Set Theme⬙ button on the touchscreen, then select the desired theme option button until a check-mark appears show-
ing that the setting has been selected.

MULTIMEDIA

467

Setting Name

Selectable Options

AutoShow Smartphone Display

Upon Connection — If Equipped

Off

Touchscreen Beep

Off

Controls Screen Time-Out —

If Equipped

Off

NOTE:
When the “Control Screen Time-Out” feature is selected, the controls screen will stay open for five seconds before the
screen times out. With the feature deselected, the screen will stay open until it is manually closed.

Navigation Next Turn Pop-Ups

Displayed In Cluster —

If Equipped

Off

NOTE:
When the “Navigation Turn-By-Turn Displayed In Cluster” feature is selected, the turn-by-turn directions will appear
in the instrument cluster display as the vehicle approaches a designated turn within a programmed route.

468

MULTIMEDIA

Units

After pressing the “Units” button on the touchscreen, you
may select each unit of measure independently displayed
in the instrument cluster display, and navigation system
(if equipped). The following selectable units of measure are
listed below:

Setting Name

Selectable Options

Units

Metric

Custom

NOTE:

When the “Custom” setting is selected, units will appear according to your personally configured settings.

To configure these settings, press the “Custom” bar. The following settings will appear:

Speed

MPH

km/h

Distance

Fuel Consumption

MPG (US)

MPG (UK)

L/100 km

km/L

Pressure

psi

kPa

bar

Temperature

°F

°C

MULTIMEDIA

469

Voice

After pressing the “Voice” button on the touchscreen, the
following settings will be available:

Setting Name

Selectable Options

Voice Response Length

Brief

Detailed

Show Command List

Never

w/Help

Always

Clock & Date

After pressing the “Clock & Date” button on the touch-
screen, the following settings will be available:

Setting Name

Selectable Options

Sync Time With GPS —

If Equipped

Off

NOTE:
The “Sync Time With GPS” feature will allow you to automatically have the radio set the time.

Set Time Hours

–

Set Time Minutes

–

Time Format

12 hrs

24 hrs

470

MULTIMEDIA

Setting Name

Selectable Options

Show Time In Status Bar —

If Equipped

Off

NOTE:
The “Show Time In Status Bar” feature will allow you to turn on or shut off the digital clock in the status bar.

Safety & Driving Assistance

After pressing the “Safety & Driving Assistance” button on
the touchscreen, the following settings will be available:

Setting Name

Selectable Options

ParkView Backup Camera Delay

Off

NOTE:
The “ParkView Backup Camera Delay” setting determines whether or not the screen will display the rear view image
with dynamic grid lines for up to ten seconds after the vehicle is shifted out of REVERSE. This delay will be canceled
if the vehicle’s speed exceeds 8 mph (13 km/h), the transmission is shifted into PARK, or the ignition is switched to
the OFF position.

MULTIMEDIA

471

Setting Name

Selectable Options

Active ParkView Backup Camera

Guidelines

Off

NOTE:
The “Active ParkView Backup Camera Guidelines” feature overlays the Rear Backup Camera image with active, or
dynamic, grid lines to help illustrate the width of the vehicle and its project back up path, based on the steering
wheel position when the option is checked. A dashed center line overlay indicates the center of the vehicle to assist
with parking or aligning to a hitch/receiver.

Forward Collision Warning

On/Off — If Equipped

Off

NOTE:
Changing the FCW status to “Off” prevents the system from warning you of a possible collision with the vehicle in
front of you.
The FCW system state is kept in memory from one ignition cycle to the next. If the system is turned off, it will
remain off when the vehicle is restarted.

Forward Collision Warning Sensi-

tivity — If Equipped

Near

Far

472

MULTIMEDIA

Setting Name

Selectable Options

NOTE:
The Forward Collision Warning (FCW) feature provides an audible and/or visual warning to potential forward collisions.
The feature can be set to Far, or set to Near. The default status of FCW is the Far setting. This means the system warns
you of a possible collision with the vehicle in front of you when you are farther away. This gives you the most reaction
time. To change the setting for more dynamic driving, select the Near setting. This warns you of a possible collision when
you are much closer to the vehicle in front of you.

Forward Collision Warning (FCW)

— Active Braking — If Equipped

Off

NOTE:
The FCW system includes Advanced Brake Assist (ABA). When this feature is selected, the ABA applies additional
brake pressure when the driver requests insufficient brake pressure to avoid a potential frontal collision. The ABA
system becomes active at 5 mph (8 km/h). To make your selection, press the “Forward Collision Warning Active
Braking” button on the touchscreen, until a check-mark appears next to setting, indicating that the setting had been
selected.

LaneSense Warning — If Equipped

Early

Medium

Late

NOTE:
When the “LanseSense Warning” feature is selected, it sets the distance at which the steering wheel provides feedback
for potential lane departures. The LDW sensitivity can be set to provide either an “Early,” “Medium,” or “Late”
warning zone start point.

MULTIMEDIA

473

Setting Name

Selectable Options

LaneSense Strength — If Equipped

Low

Medium

High

NOTE:
When the “LaneSense Strength” feature is selected, it sets the strength of the steering wheel feedback for potential
lane departures.

ParkSense — If Equipped

Sound Only

Sound & Display

NOTE:
The ParkSense system scans for objects behind the vehicle when the transmission gear selector is in REVERSE and the
vehicle speed is less than 11 mph (18 km/h). It provides an alert (audible and/or visual) to indicate the proximity to
other objects. The system can be enabled with Sound Only, or Sound & Display.

Rear ParkSense Volume

Low

Med

High

NOTE:
The Rear ParkSense Chime Volume settings can be selected from the instrument cluster display or Uconnect System.
The chime volume settings include LOW, MED, and HIGH. The factory default volume setting is MED. ParkSense
retains its last known configuration state through ignition cycles.

Electric Power Steering Default—

If Equipped

Normal

Sport

Comfort

NOTE:
When

⬙Electric Power Steering Default⬙ is selected, it allows you to change the default setting of your vehicle to either

normal, sport, or comfort.

474

MULTIMEDIA

Setting Name

Selectable Options

Blind Spot Alert — If Equipped

Off

Lights

Lights & Chime

NOTE:

• When the “Blind Spot Alert” feature is selected, the Blind Spot Alert feature Provides alerts, visual and/or audible,

to indicate objects in your blind spot. The Blind Spot Alert feature can be activated in “Lights” mode. When this
mode is selected, the Blind Spot Monitor (BSM) system is activated and only shows a visual alert in the exterior
mirrors. When “Lights & Chime” mode is activated, the Blind Spot Monitor (BSM) will show a visual alert in the
exterior mirrors as well as an audible alert when the turn signal is on.

• If your vehicle has experienced any damage in the area where the sensor is located, even if the fascia is not dam-

aged, the sensor may have become misaligned. Take your vehicle to an authorized dealer to verify sensor align-
ment. Having a sensor that is misaligned results in the BSM not operating to specification.

Hill Start Assist — If Equipped

Off

NOTE:
When the “Hill Start Assist” feature is selected, the Hill Start Assist (HSA) system is active.

MULTIMEDIA

475

Mirrors & Wipers

After pressing the “Mirrors & Wipers” button on the
touchscreen, the following settings will be available:

Setting Name

Selectable Options

Rain Sensing Auto Wipers —

If Equipped

Off

NOTE:
When this feature is selected and the wipers are on, the system will automatically activate the windshield wipers if it
senses moisture on the windshield.

Tilt Side Mirrors in Reverse —

If Equipped

Off

NOTE:
When the “Tilt Side Mirror In Reverse” feature is selected, the exterior sideview mirrors will tilt downward when the
ignition is in the RUN position and the transmission gear selector is in the REVERSE position. The mirrors will move
back to their previous position when the transmission is shifted out of REVERSE.

Headlights with Wipers

Off

476

MULTIMEDIA

Dodge Charger (2019 year). Manual - part 29