Citroën Jumpy-Dispatch (2022 year). Manual in english - page 2

18

Dashboard instruments

Checking

After driving for a few minutes, the temperature 

and pressure in the cooling system increase.

To top up the level:

►  wait at least one hour for the engine to cool,

►  unscrew the cap by two turns to allow the 

pressure to drop,

►  when the pressure has dropped, remove the 

cap,

►  top up the level to the "MAX" mark.

For more information on 

Checking levels

, refer 

to the corresponding section.

Be aware of the risk of scalding when 

topping up the coolant. Do not fill above 

the maximum level (indicated on the 

reservoir).

Engine oil level indicator

(Depending on version)

On versions fitted with an electric gauge, the 

engine oil level status is displayed on the 

instrument panel for a few seconds when the 

ignition is switched on, at the same time as the 

servicing information.

The level read will only be correct if the 

vehicle is on level ground and the engine 

has been off for more than 30 minutes.

Oil level correct

 

 

This is indicated by a message on the instrument 

panel.

Low oil level

 

 

This is indicated by a message on the instrument 

panel.

If a low oil level is confirmed by a check using 

the dipstick, the level must be topped up to avoid 

damage to the engine.

For more information on 

Checking levels

, refer 

to the corresponding section.

Oil gauge malfunction

 

 

This is indicated by the display of a message on 

the instrument panel.

Contact a CITROËN dealer or a qualified 

workshop.

In the event of a malfunction of the 

electric gauge, the oil level is no longer 

monitored.

If the system is faulty, you must check the 

engine oil level using the manual dipstick 

located in the engine compartment.

For more information on 

Checking levels

, 

refer to the corresponding section.

AdBlue

®

 range indicators 

(BlueHDi)

The Diesel BlueHDi engines are equipped with 

a system that associates the SCR (Selective 

Catalytic Reduction) emissions control system 

and the Diesel particle filter (DPF) for the 

treatment of exhaust gases. They cannot 

function without AdBlue

®

 fluid.

When the level of AdBlue

®

 falls below the 

reserve level (between 1,500 and 0 miles (2,400 

and 0 km)), a warning lamp lights up when 

the ignition is switched on and an estimate 

of the distance that can be travelled before 

engine starting is prevented is displayed in the 

instrument panel.

The engine starting prevention system 

required by regulations is activated 

automatically once the AdBlue

®

 tank is empty. 

It is then no longer possible to start the 

engine until the minimum level of AdBlue

®

 has 

been topped up.

19

Dashboard instruments

1

Manual display of driving range

While the driving range is greater than 

1,500 miles (2,400 km), it is not displayed 

automatically.

 

 

 

 

►  Press this button to temporarily display the 

driving range.

With touch screen

You can view the range information in the 

"

Driving/Vehicle

" menu.

Actions required related to a lack of 

AdBlue

®

The following warning lamps light up when the 

quantity of AdBlue

®

 is below the reserve level: 

driving range of 1,500 miles (2,400 km).

Together with the warning lamps, messages 

regularly remind you of the need to top up to 

avoid engine starting being prevented. Refer to 

the 

Warning and indicator lamps

 section for 

details of the messages displayed.

For more information on 

AdBlue

®

 

(BlueHDi)

 and in particular on topping 

up, refer to the corresponding section.

With BlueHDi (Euro 6.2/6.3) engines

Warning/

indicator 

lamps on

Action

Remaining 

range

 

 

Top up.

Between 

1,500 miles 

and 500 

miles (2,400 

km and 800 

km)

 

 

Top up as 

soon as 

possible.

Between 

500 miles 

and 62 

miles (800 

km and 

100 km)

 

 

A top-up is 

vital

, there is 

a risk that the 

engine will 

be prevented 

from starting.

Between 62 

miles and 0 

miles (100 

km and 0 

km)

 

 

To be able 

to restart the 

engine, add at 

least 5 litres of 

AdBlue

®

 to the 

tank.

0 miles (km)

Malfunction of the SCR emissions 

control system

Malfunction detection

 

 

If a malfunction is detected, 

these warning lamps come 

on, accompanied by an 

audible signal and the 

display of an "

Emissions 

control fault

" or "

NO START 

IN

" message.

The alert is triggered while driving when the 

fault is detected for the first time, and thereafter 

when switching on the ignition for subsequent 

journeys, for as long as the cause of the fault 

persists.

If the fault is temporary, the alert 

disappears during the next journey, after 

self-diagnostic checks of the SCR emissions 

control system.

Malfunction confirmed during the 

permitted driving phase (between 685 

miles and 0 miles (1,100 km and 0 km))

If the fault indication is still displayed 

permanently after 31 miles (50 km) of driving, the 

fault in the SCR system is confirmed.

The AdBlue warning lamp flashes and 

a message is displayed ("

Emissions 

control fault: starting prevented in X miles 

(kms)

" or "

NO START IN X miles (kms)

"), 

20

Dashboard instruments

indicating the driving range in miles or 

kilometres.

While driving, the message is displayed every 30 

seconds. The alert is repeated when switching 

on the ignition.

You can continue driving for up to 685 miles 

(1,100 km) before the 

engine starting 

prevention

 system is triggered.

Have it checked by a CITROËN dealer or 

a qualified workshop.

Starting prevented

Every time the ignition is switched on, the 

message "

Emissions control fault: Starting 

prevented

" or "

NO START IN

" is displayed.

To restart the engine

Contact a CITROËN dealer or a qualified 

workshop.

Power indicator (Electric)

 

 

CHARGE

Traction battery charging during deceleration 

and braking.

ECO

Moderate energy consumption and optimised 

driving range.

POWER

Energy consumption by the drive train during 

acceleration.

NEUTRAL

When the ignition is switched on, the vehicle’s 

electric drive train neither consumes nor 

generates energy; after sweeping over the 

indicator, the needle returns to its "neutral" 

position: between ECO and CHARGE.

With the ignition off, opening the driver's 

door activates the indicator, which moves 

to the "neutral" position: between ECO and 

CHARGE.

Charge level indicator 

(Electric)

 

 

The traction battery's actual charge level and 

the remaining range are displayed continuously 

when the vehicle is started.

With the ignition off, opening the driver's 

door activates the indicator.

Associated warning lamps

Two successive alert levels indicate that the 

energy available has dropped to a low level:

1st level: Reserve

0 %

100

The state of charge of the traction battery 

is low.

21

Dashboard instruments

1

Fixed LED and needle in the red zone, 

accompanied by an audible signal.

►  View the remaining range on the instrument 

panel.

►  Put the vehicle on charge as soon as 

possible.

2nd level: Critical

The state of charge of the traction battery 

is critical.

Fixed, together with the reserve LED, 

accompanied by an audible signal.

►  You must put the vehicle on charge.

The remaining range is no longer 

calculated. The drive train power 

gradually decreases.

The heating and air conditioning are switched 

off (even if the needle indicating their 

consumption is not at the "

ECO

" position). 

Thermal comfort 

consumption indicator 

(Electric)

 

 

The gauge shows the consumption of the 

traction battery's electrical energy by the thermal 

comfort devices in the passenger compartment.

The devices in question are the heating and air 

conditioning systems.

This equipment can be used:

–  If the vehicle is not plugged in, when the 

READY

 lamp is lit.

–  If the vehicle is plugged in, when the ignition is 

switched on ("Lounge" mode).

Selecting 

ECO

 mode limits the performance 

of some of this equipment. The needle on the 

thermal comfort consumption indicator then 

moves into the "

ECO

" zone.

To quickly heat or cool the passenger 

compartment, feel free to temporarily 

select the maximum heating or cooling 

setting.

When the heating is on maximum, the gauge 

on the thermal comfort consumption indicator 

is in the 

MAX

 zone. When the air conditioning 

is on maximum, it stays in the 

ECO

 zone.

Excessive use of thermal comfort equipment, 

particularly at low speed, can significantly 

decrease the vehicle's range.

Remember to optimise equipment settings 

upon achieving the desired level of comfort, 

and adjust them if necessary whenever you 

start the vehicle.

After an extended period without using the 

heating, you may notice a slight odour during 

the first few minutes of use.

Distance recorders

The total and trip distances are displayed for 

thirty seconds when the ignition is switched off, 

when the driver's door is opened and when the 

vehicle is locked or unlocked.

22

Dashboard instruments

Total distance recorder

 

 

 

 

This measures the total distance travelled by the 

vehicle since its initial registration.

Trip distance recorder (Diesel)

 

 

 

 

This measures the distance travelled since it was 

last reset by the driver.

Resetting the trip recorder

 

 

►  With the ignition on, press the button until 

zeros appear.

Lighting dimmer

This system allows the brightness of the 

instruments and controls to be adjusted manually 

to suit the ambient light level.

With buttons

 

 

 

 

With the lamps on, press button 

A

 to increase 

the brightness of the lighting, or button 

B

 to 

decrease it.

Release the button when the desired brightness 

is reached.

With touch screen

 

 

►  In the 

Settings

 menu, select "

Brightness

" 

or "

OPTIONS

", "

Screen configuration

" then 

"

Brightness

".

►  Adjust the brightness by pressing the arrows 

or moving the slider.

The brightness can be set differently for 

day mode and night mode.

Trip computer

Displays information related to the current trip 

(range, fuel consumption, average speed, etc.).

Information display

To display the various trip computer tabs in turn:

23

Dashboard instruments

1

 

 

 

 

►  Press the button located on the end of the 

wiper control stalk

.

With steering-mounted controls

 

 

►  Press the knob on the 

steering wheel

.

On the instrument panel

 

 

 

 

►  Press this button.

The following current information is shown in 

turn:

–  Driving range (Diesel).

–  Current consumption.

–  Stop & Start time counter (Diesel).

–  Trip "

1

" followed by (depending on version) 

trip "

2

" including average speed, average 

consumption and distance travelled for each trip.

Trips "

1

" and "

2

" are independent but their use 

is identical.

For example, trip "

1

" can be used for daily 

figures and trip "

2

" for monthly figures.

Trip reset

The reset is performed when the trip counter is 

displayed.

 

 

 

 

►  Press the button on the end of the 

wiper 

control stalk

 for more than two seconds.

 

 

►  Press the knob on the 

steering wheel

 for 

more than two seconds.

 

 

 

 

►  Press this button for more than 2 seconds.

Definitions

Range

(miles or km)

(Traction battery charge level percentage) 

(Electric)

Distance that can still be travelled with the 

fuel remaining in the tank (based on the 

average fuel consumption over the last few miles 

(kilometres) travelled).

This value may vary following a change in driving 

style or terrain, leading to a significant change in 

current fuel consumption.

When the range falls below 19 miles (30 km), 

dashes are displayed.

After filling with at least 5 litres of fuel, the range 

is recalculated and is displayed if it exceeds 62 

miles (100 km).

Dashes appearing permanently in place of 

numbers while driving indicates a malfunction.

24

Dashboard instruments

Contact a CITROËN dealer or a qualified 

workshop.

Current consumption

(mpg or l/100 km or km/l)

(miles/kWh or kWh/100 km or km/kWh) (Electric)

/

Calculated during the last few 

seconds.

This function is only displayed at speeds above 

19 mph (30 km/h) (Diesel).

Average consumption

(mpg or l/100 km or km/l)

(miles/kWh or kWh/100 km or km/kWh) (Electric)

/

Calculated since the last trip 

computer reset.

Average speed

(mph or km/h)

Calculated since the last trip computer 

reset.

Distance travelled

(miles or km)

Calculated since the last trip computer 

reset.

Stop & Start time counter

(minutes/seconds or hours/minutes) 

If your vehicle is fitted with the Stop & Start 

function, a time counter calculates the time spent 

in STOP mode during a journey.

The time counter is reset each time the ignition is 

switched on.

Touch screen

This system gives access to the following 

elements:

–  Permanent display of the time and outside 

temperature (a blue warning lamp appears if 

there is a risk of ice).

–  Vehicle functions and equipment setting 

menus.

–  Audio system and telephone controls and 

display of related information.

–  Display of visual manoeuvring aid functions

–  Internet services and display of related 

information.

–  Navigation system controls and 

display of related information (depending on 

version).

For safety reasons, always stop the 

vehicle before performing operations 

that require sustained attention.

Some functions are not accessible while 

driving.

Recommendations

This screen uses capacitive sensing technology.

–  Do not use pointed objects on the touch 

screen.

–  Do not touch the touch screen with wet hands.

–  Use a soft, clean cloth to clean the touch 

screen.

Principles

►  Use the buttons on each side of the touch 

screen to access the menus, then press the 

buttons that appear on the touch screen.

Some menus may display across two pages: 

press the "

OPTIONS

" button to access the 

second page.

After a few moments with no action on 

the second page, the first page is 

displayed automatically.

To deactivate/activate a function, select "

OFF

" 

or "

ON

".

Configuring a function

 

Access to additional information on the 

function

Confirm

 

Return to the previous page or confirm

 

Menus

 

 

25

Dashboard instruments

1

Press the touch screen with three fingers 

to show all of the menu buttons.

For more information about the menus, 

refer to the sections describing the audio 

and telematics systems.

Radio/Media

 

Navigation

 (Depending on equipment) 

Driving or Vehicle

 (Depending on 

equipment)

Activation, deactivation and settings for certain 

functions.

The functions are organised in 2 tabs: "

Driving 

functions

" and "

Vehicle settings

".

Telephone

 

Applications

Display of available connected services.

Energy

Access the specific Electric functions 

(energy flow, consumption statistics, deferred 

charge) organised in the corresponding 3 tabs.

or

Settings

Main settings for the audio system and 

touch screen.

Audio system on/off

Volume adjustment/mute

Upper bar

Certain information is displayed permanently in 

the upper bar of the touch screen:

–  Time and outside temperature (a blue warning 

lamp appears if there is a risk of ice).

–  Reminder of information from the 

RadioMedia

 and 

Telephone

 menus and 

navigation instructions (depending on 

equipment).

–  Notifications.

–  Access to the 

Settings

. 

Energy menu (Electric)

This menu is only available with MyCitroën 

Drive.

Depending on version, this is accessible either:

–  directly, by pressing the button near the 

touch screen.

–  via the 

Applications

 menu. 

Flow

The page displays a real-time representation of 

the electric drive train’s operation.

 

 

1.

Active driving mode

2.

Electric motor

3.

Estimated traction battery charge level

4.

Energy flows

The energy flows have a specific colour for each 

type of driving:

A.

Blue: energy consumption

B.

Green: energy recovery

Statistics

This page shows electrical energy consumption 

statistics.

 

 

–  Blue bar chart: directly consumed energy 

supplied by the traction battery.

–  Green bar chart: energy recovered during 

deceleration and braking, used to recharge the 

battery.

26

Dashboard instruments

The average result for the current trip is stated in 

kWh/100 km.

►  You can change the displayed time scale by 

pressing the 

-

 or 

+

 buttons.

A current trip is any trip of more than 20 

minutes without switching off the ignition.

Charging

This page allows you to programme deferred 

charging.

For more information on 

Charging the traction 

battery (Electric)

, refer to the corresponding 

section.

Additional remotely 

operable functions 

(Electric)

(Depending on country of sale)

 

 

The following functions are 

available from the 

MyCitroën 

App

 application, which is 

accessible from a smartphone:

–  Managing the traction battery charging 

(deferred charging).

–  Managing the temperature pre-conditioning.

–  Viewing the state of charge and range of the 

vehicle.

Installation procedure

►  Download the 

MyCitroën App

 application 

from the appropriate online store for your 

smartphone.

►  Create an account.

►  Enter the vehicle’s VIN (code beginning with 

"VF" on the vehicle registration certificate).

For more information on 

Identification 

markings

, refer to the corresponding section.

Network coverage

In order to be able to use the various 

remotely operable features, ensure that your 

vehicle is located in an area covered by the 

mobile network.

A lack of network coverage may prevent 

communication with the vehicle (for example, 

if it is in an underground car park). In such 

cases, the application will display a message 

indicating that the connection with the vehicle 

could not be established.

Setting the date and time

With audio system

►  Press the 

MENU

 button for access to the 

main menu

.

►  Press the "

7

" or "

8

" button to select the 

"

Personalisation-configuration

" menu, then 

confirm by pressing the 

OK

 button.

►  Press the "

5

" or "

6

" button to select the 

Display configuration

 menu, then confirm by 

pressing the 

OK

button.

►  Press the "

5

" or "

6

" and "

7

" or "

8

" buttons 

to adjust the date and time values, then confirm 

by pressing the 

OK

 button.

With MyCitroën Play

►  Select the 

Settings

 menu in the upper 

banner of the touch screen.

►  Select "

Configuration

".

►  Select "

Date and time

". 

►  Select "

Date

" or "

Time

".

►  Choose the display formats.

►  Change the date and/or time using the 

numeric keypad.

►  Confirm with "

OK

".

With MyCitroën Drive

Time and date settings are only available if GPS 

synchronisation is deactivated.

►  Select the 

Settings

 menu in the 

banner of the touch screen.

►  Press the "

OPTIONS

" button to access the 

secondary page.

►  Select "

Setting the time-date

". 

►  Select the "

Date:

" or "

Time

" tab.

►  Set the date and/or time using the numeric 

keypad.

►  Confirm with "

OK

".

27

Dashboard instruments

1

Additional settings

You can choose:

–  To change the time zone.

–  To change the display format of the date and 

time (12h/24h).

–  To activate or deactivate the summer time 

management function (+1 hour).

–  To activate or deactivate GPS synchronisation 

(UTC).

The system does not automatically 

change between winter and summer time 

(depending on the country of sale).

28

Access

Electronic key with 

remote control function 

and built-in key

Advice

If one of the doors or the boot is still open 

or if the electronic key for the Keyless 

Entry and Start  system has been left inside 

the vehicle, central locking will not take place.

However, if the vehicle is fitted with an alarm, 

it will be activated after 45 seconds.

If the vehicle is unlocked but the doors or 

boot are not subsequently opened, the 

vehicle will automatically lock itself again after 

about 30 seconds. If the vehicle is fitted with 

an alarm, it will be reactivated automatically.

Automatic door mirror folding and 

unfolding can be deactivated by a 

CITROËN dealer or a qualified workshop.

As a safety measure, never leave the 

vehicle, even for a short time, without 

taking the Keyless Entry and Start system’s 

electronic key with you.

Be aware of the risk of theft of the vehicle if 

the key is present in one of the defined areas 

while the vehicle is unlocked.

If a door is not properly closed (except the 

right-hand door with side-hinged rear 

doors):

–  when the vehicle is stationary and engine 

running, this warning lamp comes on, 

accompanied by a warning message for a few 

seconds, 

–  when the vehicle is moving (at speeds above 

6 mph (10 km/h)), this warning lamp comes on, 

accompanied by an audible signal and a warning 

message for a few seconds.

Remote control key

This allows the central locking or unlocking of the 

vehicle using the door lock or from a distance.

It also allows the vehicle to be located, the fuel 

filler cap and charging flap to be opened and 

closed and the engine to be started or switched 

off, as well as providing protection against theft.

The remote control buttons are not active 

with the ignition switched on.

Unfolding / Folding the key

 

 

►  Press this button to unfold or fold the key.

The remote control may be damaged if 

you do not press the button.

Keyless Entry and Start

This allows the central locking or unlocking of the 

vehicle from a distance. 

It is also used to locate and start the vehicle, as 

well as providing protection against theft.

Integral key

This is used to lock and unlock the vehicle when 

the remote control cannot operate:

–  cell battery flat, vehicle battery discharged or 

disconnected, etc.

–  vehicle located in an area with strong 

electromagnetic signals.

 

29

Access

2

 

►  Keep this button 

1

 pulled while removing 

key 

2

 from the housing.

If the alarm is activated, the audible 

signal triggered on opening a door with 

the key (integral with the remote control) will 

stop when the ignition is switched on.

Once the built-in key is ejected, always 

keep it with you to be able to carry out 

the corresponding back-up procedures.

"Keyless Entry and Start" on your 

person

 

 

It allows the unlocking, locking and starting of the 

vehicle while carrying the remote control on your 

person in recognition zone "

A

".

In the ignition on (accessories) position, 

with the "START/STOP" button, the 

hands-free function is deactivated and it is 

impossible to open the doors.

For more information on 

Starting/switching 

off the engine, Keyless Entry and Start

 and 

in particular the "ignition on" position, refer to 

the corresponding section.

Locating the vehicle

This function helps you to spot your vehicle from 

a distance, with the vehicle locked:

–  The direction indicators flash for approximately 

10 seconds.

–  The courtesy lamps come on.

►  Press this button.

 

Remote operation of lighting

If fitted to the vehicle.

A short press on this button switches on 

the lighting remotely (lighting of 

sidelamps, dipped beam headlamps and number 

plate lamps).

A second press on the button before the end of 

the timed period cancels the remote lighting.

Advice

Remote control

The remote control is a sensitive, high-

frequency device; avoid handling it in your 

pocket, due to the risk of unintentionally 

unlocking the vehicle.

Avoid pressing the remote control buttons 

while out of range of the vehicle, due to 

the risk of rendering the remote control 

inoperative. It would then be necessary to 

reset it.

The remote control does not work when the 

key is in the ignition switch, even when the 

ignition is switched off.

Anti-theft protection

Do not modify the electronic vehicle 

immobiliser, as this might result in 

malfunctions.

For vehicles with a key ignition switch, 

remember to remove the key and turn the 

steering wheel to engage the steering lock.

Locking the vehicle

Driving with the doors locked could make 

it more difficult for the emergency services 

to enter the passenger compartment in an 

emergency.

As a safety precaution, remove the key from 

the ignition or take the electronic key with you 

when leaving the vehicle, even for a short 

time.

30

Access

Purchasing a second-hand vehicle

Have the key codes memorised by a 

CITROËN dealer, to ensure that the keys in 

your possession are the only ones able to 

start the vehicle.

To preserve the battery charge in the 

electronic key and the vehicle's battery, 

the "hands-free" functions are set to 

hibernation mode after 21 days without use. 

To restore these functions, press one of the 

remote control buttons or start the engine with 

the electronic key in the reader.

For more information on starting with the 

Keyless Entry and Start system, refer to the 

corresponding section.

Electrical interference

The electronic key may not work if it is 

close to an electronic device (e.g. mobile 

telephone (switched on or on standby), laptop 

computer, strong magnetic fields). If this 

occurs, move the electronic key away from 

the electronic device.

Accumulations (water, dust, grime, salt, 

etc.) on the inner surface of the door 

handle may affect detection.

If cleaning the inner surface of the door 

handle using a cloth does not restore 

detection, contact a CITROËN dealer or a 

qualified workshop.

A sudden splash of water (stream of water, 

high pressure jet washer, etc.) may be 

identified by the system as the desire to open 

the vehicle.

Unlocking/Complete or 

selective unlocking

What is the purpose of total 

or selective unlocking?

 

 

 

 

Total unlocking unlocks 

all

 the vehicle’s doors 

(front, side and rear).

 

 

Selective unlocking unlocks either the 

cab

 doors, 

or the doors of the 

loading area

 (side and rear).

The separated unlocking system 

between 

cab

 and 

loading area

 is a 

security measure. This prevents access to the 

part of the vehicle where the driver is not 

present.

Activation/Deactivation

 

 

 

 

►  To 

activateselective

 unlocking 

between the 

cab

 and the 

loading 

area

 or to 

deactivate

 selective unlocking and 

return to 

total

 unlocking mode, switch on the 

ignition and press this button for more than two 

seconds.

An audible signal and, depending on equipment, 

a display message, confirm that the request has 

been acknowledged.

Selective unlocking between 

cab

 and 

loading area

 is activated by default.

31

Access

2

Unlocking/Complete 

unlocking

Unlocking is signalled by rapid flashing of 

the direction indicators for a few 

seconds.

Depending on version, the door mirrors unfold 

and the alarm is deactivated.

With the key

►  To unlock the vehicle 

fully

, turn the key in the 

front left-hand door lock towards the front of the 

vehicle.

If the vehicle has an alarm, it will not be 

deactivated. Opening a door will trigger the 

alarm, which can be stopped by switching the 

ignition on.

With the remote control

►  Depending on equipment, 

press one of these buttons to 

unlock the vehicle.

Using the remote control with electric 

sliding side door(s)

►  To 

fully

 unlock the vehicle and open 

the side door, press and hold this button 

until the door has opened.

With Keyless Entry and Start on your 

person

To unlock the vehicle, the remote control must be 

in recognition zone 

A

.

►  To unlock the vehicle 

fully

, pass your hand 

behind one of the door handles (front door(s), 

manual sliding side door(s) or left-hand side-

hinged door) and then pull the handle to open 

the corresponding door.

With electric sliding side door(s)

 

 

►  With the Keyless Entry and Start on your 

person, pass your hand behind the handle 

to unlock the vehicle, then pull and release 

the handle. This action also causes the 

corresponding door to open.

With tailgate

 

 

►  With the Keyless Entry and Start on your 

person, to unlock the 

vehicle

, pull the tailgate 

handle and then lift it up to open it.

With an opening rear screen in the tailgate

 

 

►  With the Keyless Entry and Start on your 

person, to unlock the vehicle, press the tailgate 

opening rear screen unlocking control. The 

screen will open slightly; then, lift it up to open it.

Selective unlocking

 

 

32

Access

Unlocking is signalled by rapid flashing of 

the direction indicators for a few 

seconds.

Depending on version, the door mirrors unfold 

and the alarm is deactivated.

With the remote control

►  To unlock the 

cabin

 doors alone, 

press this button 

once

.

►  To unlock the side and rear doors of the 

loading area

, press this button a 

second time

.

If the vehicle is fitted with this function:

►  Press this button to unlock the 

loading area

 only.

Using the remote control with electric 

sliding side door(s)

►  To unlock the 

loading area

 alone 

without opening the side door, press the 

relevant door button or keep the button pressed 

down to open the door.

With Keyless Entry and Start on your 

person

 

 

►  To unlock the 

cabin

 alone, pass your hand 

behind a handle of the front left or right doors, 

then pull the handle to open the door.

The door locking state of the 

loading 

area

 remains unchanged.

 

 

►  To unlock the loading area alone, the remote 

control on your person in 

recognition zone

 

A

, 

B

 

or 

C

, pass your hand behind a handle of the front 

left or right doors, then pull the handle to open 

the corresponding door.

Depending on the version, the door 

mirrors unfold only when the cabin is 

unlocked, the alarm is deactivated.

With electric sliding side door(s)

 

 

►  With the Keyless Entry and Start on your 

person, pass your hand behind the left-hand or 

right-hand door handle to unlock the 

loading 

area

, then pull and release the handle. This 

action also causes the corresponding door to 

open.

With tailgate

 

 

►  With the Keyless Entry and Start on your 

person, to unlock the 

loading area

, pull the 

tailgate handle and then lift it up. 

Unlocking is signalled by rapid flashing of 

the direction indicators for a few 

seconds. 

33

Access

2

Locking

With the key

►  To lock the vehicle 

fully

, turn the key in the 

front left-hand door lock towards the rear of the 

vehicle.

If your vehicle has an alarm, it will not be 

activated.

With the remote control

►  To lock the vehicle 

completely

, press 

this button.

With Keyless Entry and 

Start on your person

To lock the vehicle, the remote control must be in 

recognition zone 

A

.

 

 

►  To lock the vehicle, press the markings on 

one of the door handles (front door(s), manual 

sliding side door(s) or left-hand side-hinged 

door).

With electric sliding side door(s)

►  With the Keyless Entry and Start on your 

person, to lock the vehicle 

fully

, press the 

markings on one of the 

front

 door handles.

With tailgate

 

 

►  With the Keyless Entry and Start on your 

person, press the tailgate locking control to lock 

the vehicle.

Depending on version, keeping 

the locking controls depressed 

closes the windows. If the control is released, 

the window stops in its current position.

Ensure that no person or object might 

prevent the windows from closing 

properly.

Pay particular attention to children when 

operating windows.

If the vehicle is not fitted with an alarm, 

locking is signalled by fixed lighting of the 

direction indicators for approximately two 

seconds. 

Depending on version, the door mirrors fold at 

the same time.

Driving with the doors locked could make 

it more difficult for the emergency 

services to enter the passenger compartment 

in an emergency.

As a safety measure, never leave the vehicle 

without taking the remote control with you, 

even for a short time.

Deadlocking

Deadlocking deactivates the exterior and 

interior door controls, as well as the 

central locking button on the dashboard.

The horn remains operational.

You must therefore never leave anyone inside 

the vehicle when it is deadlocked.

With the key

►  To deadlock the vehicle, turn the key in the 

front left-hand door lock towards the rear of the 

vehicle.

►  Then, 

within five seconds

, turn the key 

towards the rear again.

With the remote control

►  To deadlock the vehicle, press this 

button.

►  Then 

within five seconds after locking

, 

press this button again.

Depending on version, the electric door 

mirrors fold at the same time.