Acura MDX HYBRID (2020 year). Manual in english - page 5

77

uu

Child Safety

u

Safety of Infants and Small Children

Safe 

Driving

■

Using a third row anchor

1.

Pull up the head restraint and push 
rearwards until it latches, then route the 
tether strap through the head restraint legs. 
Make sure the strap is not twisted.

1.

Pull up the head restraint and push 
rearwards until it latches, then route the 
tether strap outside the head restraint legs.
Make sure the strap is not twisted.

2.

Open the anchor cover.

3.

Secure the tether strap hook to the anchor.

4.

Tighten the tether strap as instructed by the 
child seat manufacturer.

Tether Strap Hook

Third row seat

Straight Top Tether Type

Other Top Tether Type

Tether Strap Hook

Anchor

Anchor

Straight Top Tether Type

Other Top Tether Type

All Types

78

uu

Child Safety

u

Safety of Larger Children

Safe 

Driving

Safety of Larger Children

The following pages give instructions on how to check proper seat belt fit, what kind 
of booster seat to use if one is needed, and important precautions for a child who 
must sit in front.

When a child is too big for a child seat, secure the child in a rear seat using the lap/
shoulder seat belt. Have the child sit upright and all the way back, then answer the 
following questions.

■

Checklist

•

Do the child’s knees bend comfortably over 
the edge of the seat?

•

Does the shoulder belt cross between the 
child’s neck and arm?

•

Is the lap part of the seat belt as low as 
possible, touching the child’s thighs?

•

Will the child be able to stay seated like this 
for the whole trip?

If you answer yes to all these questions, the child is ready to wear the lap/shoulder 
seat belt correctly. If you answer no to any question, the child needs to ride on a 
booster seat until the seat belt fits properly without a booster seat.

■

Protecting Larger Children

■

Checking Seat Belt Fit

1

Safety of Larger Children

3

WARNING

Allowing a child age 12 or under to sit in 
front can result in injury or death if the 
passenger’s front airbag inflates.

If a larger child must ride in front, move the 
vehicle seat as far to the rear as possible, 
have the child sit up properly and wear the 
seat belt properly, using a booster seat if 
needed.

79

uu

Child Safety

u

Safety of Larger Children

Safe 

Driving

If a lap/shoulder seat belt cannot be used 
properly, position the child in a booster seat in 
the rear seat. For the child’s safety, check that 
the child meets the booster seat 
manufacturer’s recommendations.

Your vehicle has a rear seat where children can be properly restrained. If you ever 
have to carry a group of children, and a child must ride in front:

•

Make sure you read and fully understand the instructions and safety information 
in this manual.

•

Move the front passenger seat as far back as possible.

•

Have the child sit upright and well back in the seat.

•

Check that the seat belt is properly positioned so that the child is secure in the 
seat.

■

Monitoring child passengers

We strongly recommend that you keep an eye on child passengers. Even older, more 
mature children sometimes need to be reminded to fasten their seat belts and sit up 
properly.

■

Booster Seats

1

Booster Seats

When installing a booster seat, make sure to read the 
instructions that came with it, and install the seat 
accordingly.
There are high- and low-type booster seats. Choose a 
booster seat that allows the child to wear the seat 
belt correctly.

Some U.S. states and Canadian provinces and 
territories require children to use a booster seat until 
they reach a given age or weight (e.g. 6 years or 60 
lbs). Be sure to check current laws in the state or 
province, or territory where you intend to drive.

■

Protecting Larger Children-Final Checks

80

Safe 

Driving

Exhaust Gas Hazard

Carbon Monoxide Gas

The engine exhaust from this vehicle contains carbon monoxide, a colorless, 
odorless, and highly toxic gas. As long as you properly maintain your vehicle, carbon 
monoxide gas will not get into the interior.

■

Have the exhaust system inspected for leaks whenever

•

The exhaust system is making an unusual noise.

•

The exhaust system may have been damaged.

•

The vehicle is raised for an oil change.

When you operate a vehicle with the tailgate open, airflow can pull exhaust gas into 
the interior and create a hazardous condition. If you must drive with the tailgate 
open, open all the windows and set the climate control system as shown below.

1.

Select the fresh air mode.

2.

Select the 

 mode.

3.

Set the fan speed to high.

4.

Set the temperature control to a comfortable setting.

Adjust the climate control system in the same manner if you sit in your parked 
vehicle with the engine running.

1

Carbon Monoxide Gas

An enclosed area such as a garage can quickly fill up 
with carbon monoxide gas.
Do not run the engine with the garage door closed. 
Even when the garage door is open, drive out of the 
garage immediately after starting the engine.

3

WARNING

Carbon monoxide gas is toxic.

Breathing it can cause unconsciousness and 
even kill you.

Avoid any enclosed areas or activities that 
expose you to carbon monoxide.

81

Safe 

Driving

Safety Labels

Label Locations

These labels are in the locations shown. They warn you of potential hazards that can cause serious injury or death. Read these labels 
carefully.

If a label comes off or becomes hard to read (except for the U.S. dashboard label which may be removed by the owner), contact a dealer 
for a replacement.

r

DANGER

WARNUNG

49kPa

NEVER

Hot coolant will scald you.

N’OUVREZ PAS QUAND CHAUD.

NICHT BEI HEISSEM MOTOR ŌFFNEN.

OPEN WHEN HOT.

DANGER

WARNUNG

NEVER

Hot coolant will scald you.

N’OUVREZ PAS QUAND CHAUD.

NICHT BEI HEISSEM MOTOR ŌFFNEN.

OPEN WHEN HOT.

108kPa

Sun Visor

U.S. models

Canadian models

Radiator Cap

U.S. models only

Dashboard

U.S. models only

Sun Visor

Radiator Cap

84

In

strum

ent Pa

nel

Indicators

Indicator

Name

On/Blinking

Explanation

Message

Brake System 
Indicator (Red)

●

Comes on for a few seconds 
when you set the power mode to 
ON, then goes off.

●

Comes on when the brake fluid 
level is low.

●

Comes on if there is a problem 
with the brake system.

●

Comes on while driving

 - Check the brake 

fluid level.

2

What to do when the indicator comes on 
while driving

 P. 644

●

Comes on along with the brake system 
indicator (amber)

 - Immediately stop in a 

safe place. Contact a dealer for repair. The 
brake pedal becomes harder to operate.
Depress the pedal further than you normally 
do.

●

Comes on along with the ABS indicator

 - 

Have your vehicle checked by a dealer.

2

If the Brake System Indicator (Red) 
Comes On

 P. 644

U.S.

Canada

(Red)

85

uu

Indicators

u

Continued

In

strum

ent Pa

nel

Indicator

Name

On/Blinking

Explanation

Message

Brake System 
Indicator (Amber)

●

Comes on for a few seconds 
when you set the power mode to 
ON, then goes off.

●

Comes on if there is a problem 
with a system related to braking 
other than the conventional 
brake system.

●

Comes on if there is a problem 
with the electric parking brake 
system.

●

Comes on if there is a problem 
with the cooperative control with 
regenerative braking, the electric 
servo brake system, or the hill 
start assist system.

●

Comes on while driving

 - Have your vehicle 

checked by a dealer.

●

Stays on constantly

 - Avoid high speeds and 

sudden braking. Take the vehicle to a dealer 
immediately.

●

With this indicator on, your vehicle still has 
normal braking ability.

●

Comes on if there is a problem 
with the automatic brake hold 
system.

2

Automatic Brake Hold

 P. 522

U.S.

Canada

(Amber)

U.S.

Canada

U.S.

Canada

86

uu

Indicators

u

In

strum

ent Pa

nel

Indicator

Name

On/Blinking

Explanation

Message

Electric Parking 
Brake Indicator

●

Comes on for a few seconds 
when you set the power mode to 
ON, then goes off.

●

Comes on when the parking 
brake is applied, and goes off 
when it is released.

●

Comes on for about 15 seconds 
then goes off when you push the 
electric parking brake switch with 
the power mode in OFF.

●

Comes on for about 15 seconds 
then goes off when you set the 
power mode to OFF with the 
parking brake applied.

●

Blinks and the electric parking brake 
system indicator comes on at the same 
time

 - There is a problem with the electric 

parking brake system. The parking brake may 
not be set.

●

Comes on when you pull the 
electric parking brake switch 
without depressing the brake 
pedal.

●

Depress the brake pedal to release the parking 
brake.

2

Parking Brake

 P. 518

Electric Parking 
Brake System 
Indicator

●

Comes on for a few seconds 
when you set the power mode to 
ON, then goes off.

●

Comes on if there is a problem 
with the electric parking brake 
system.

●

Comes on while driving

 - Avoid using the 

parking brake and have your vehicle checked 
by a dealer immediately.

2

If the Electric Parking Brake System 
Indicator Comes On

 P. 645

U.S.

Canada

87

uu

Indicators

u

Continued

In

strum

ent Pa

nel

Indicator

Name

On/Blinking

Explanation

Message

Automatic Brake 
Hold System 
Indicator

●

Comes on for a few seconds 
when you set the power mode to 
ON, then goes off.

●

Comes on when the automatic 
brake hold system is on.

2

Automatic Brake Hold

 P. 522

Automatic Brake 
Hold Indicator

●

Comes on for a few seconds 
when you set the power mode to 
ON, then goes off.

●

Comes on when the automatic 
brake hold is activated.

2

Automatic Brake Hold

 P. 522

—

U.S.

Canada

88

uu

Indicators

u

In

strum

ent Pa

nel

Indicator

Name

On/Blinking

Explanation

Message

Low Oil Pressure 
Indicator

●

Comes on when you set the 
power mode to ON, and goes off 
when the power system starts.

●

Comes on when the engine oil 
pressure is low.

●

Comes on while driving

 - Immediately stop 

in a safe place.

2

If the Low Oil Pressure Indicator Comes 
On

 P. 642

Malfunction 
Indicator Lamp

●

Comes on when you set the 
power mode to ON, and goes off 
either when the power system is 
on or after several seconds if the 
power system did not start. If 
“readiness codes” have not been 
set, it blinks five times before it 
goes off.

●

Comes on if there is a problem 
with the emissions control 
systems.

●

Blinks when a misfire in the 
engine’s cylinders is detected.

●

Readiness codes are part of the on board 
diagnostics for the emissions control systems.

2

Testing of Readiness Codes

 P. 667

●

Comes on while driving

 - Have your vehicle 

checked by a dealer.

●

Blinks while driving

 - Stop in a safe place 

where there are no flammable objects. Stop 
the power system for 10 minutes or more, and 
wait for it to cool down. Then, take your 
vehicle to a dealer.

2

If the Malfunction Indicator Lamp Comes 
On or Blinks

 P. 643

12-Volt Battery 
Charging System 
Indicator

●

Comes on when you set the 
power mode to ON, and goes off 
when the power system is on.

●

Comes on when the 12-volt 
battery is not charging.

●

Comes on while driving

 - Turn off the 

climate control system and rear defogger in 
order to reduce electricity consumption.

2

If the 12-Volt Battery Charging System 
Indicator Comes On

 P. 642

89

uu

Indicators

u

Continued

In

strum

ent Pa

nel

Indicator

Name

On/Blinking

Explanation

Message

Gear Position 
Indicator

●

Indicates the current gear 
selection.

2

Shifting

 P. 465

—

M

 (sequential 

mode) Indicator/
Sequential Mode 
Gear Selection 
Indicator

●

Comes on when the manual 
sequential mode is applied.

2

Sequential Mode

 P. 471

—

90

uu

Indicators

u

In

strum

ent Pa

nel

Indicator

Name

On/Blinking

Explanation

Message

Transmission 
System Indicator

●

The indicated current gear 
selection blinks if there is a 
problem with the transmission 
system.

●

Avoid sudden start and acceleration, and stop 
in a safe place immediately. 
Have your vehicle checked by a dealer.

●

All the gear positions may light 
for several seconds.

●

When all the gear positions light, immediately 
stop your vehicle in a safe place.

●

Indicators go off if there is no problem.
However, even if they go off, take your vehicle 
to a dealer for inspection.

—

●

The indicated current gear 
selection or all the gear positions 
blink if there is a problem with 
the transmission system, and the 
vehicle no longer moves.

●

Immediately stop in a safe place.

2

Emergency Towing

 P. 657

●

Have your vehicle checked by a dealer.

●

The indicated current gear 
selection or all the gear positions 
blink if you cannot select 

(

P

 due 

to the transmission system 
failure.

●

The power system can be activated as a 
temporary measure.

2

If the Transmission System Indicator 
Blinks along with the Warning Message

 

P. 646

●

Set the parking brake when parking.

●

Have your vehicle checked by a dealer 
immediately.

91

uu

Indicators

u

Continued

In

strum

ent Pa

nel

Indicator

Name

On/Blinking

Explanation

Message

Seat Belt 
Reminder 
Indicator

●

Comes on and the beeper sounds 
if you are not wearing a seat belt 
when you set the power mode to 
ON.

●

If the front passenger is not 
wearing a seat belt, the indicator 
comes on about a few seconds 
later.

●

Blinks while driving if either you 
and/or the front passenger has 
not fastened a seat belt. The 
beeper sounds and the indicator 
blinks at regular intervals.

●

The beeper stops and the indicator goes off 
when you and the front passenger fasten their 
seat belts.

●

Stays on after you and/or the front 
passenger has fastened the seat belt(s)

 - 

A detection error may have occurred in the 
sensor. Have your vehicle checked by a dealer.

2

Seat Belt Reminder

 P. 40

Low Fuel Indicator

●

Comes on when the fuel reserve 
is running low (approximately 2.5 
U.S. gal./9.5 Liter left).

●

Blinks if there is a problem with 
the fuel gauge.

●

Comes on

 - Refuel your vehicle as soon as 

possible.

●

Blinks

 - Have your vehicle checked by a 

dealer.

POWER SYSTEM

 

Indicator

●

Comes on for a few seconds 
when you set the power mode to 
ON, then goes off.

●

Comes on if there is a problem 
with the electric vehicle system.

●

Comes on while driving

 - Have your vehicle 

checked by a dealer immediately.

2

If the Power System Indicator Comes On

 

P. 647

92

uu

Indicators

u

In

strum

ent Pa

nel

Indicator

Name

On/Blinking

Explanation

Message

High Temperature 
Indicator

●

Comes on for a few seconds 
when you set the power mode to 
ON, then goes off.

●

Blinks when the engine coolant 
temperature goes up, and stays 
on if the temperature continues 
to rise.

●

Blinks while driving

 - Drive slowly to 

prevent overheating.

●

Stays on while driving

 - Immediately stop in 

a safe place and allow the engine to cool.

2

Overheating

 P. 640

Low Temperature 
Indicator

●

Comes on for a few seconds 
when you set the power mode to 
ON, then goes off.

●

Comes on when the engine 
coolant temperature is low.

●

If the indicator stays on after the engine has 
reached normal operating temperature, there 
may be problem with the temperature 
sensors. Have your vehicle inspected by a 
dealer.

—

SPORT+

 mode 

Indicator

●

Comes on for a few seconds 
when you set the power mode to 
ON, then goes off.

●

Comes on when you press the 

Dynamic Mode

 button if the 

Sport+ mode was selected.

2

Integrated Dynamics System

 P. 474

—

READY

 Indicator

●

Comes on when the vehicle is 
ready to drive.

2

Turning on the Power

 P. 457

93

uu

Indicators

u

Continued

In

strum

ent Pa

nel

Indicator

Name

On/Blinking

Explanation

Message

Anti-lock Brake 
System (

ABS

) 

Indicator

●

Comes on for a few seconds 
when you set the power mode to 
ON, then goes off.

●

If it comes on at any other time, 
there is a problem with the ABS.

●

Stays on constantly

 - Have your vehicle 

checked by a dealer. With this indicator on, 
your vehicle still has normal braking ability but 
no anti-lock function.

2

Anti-lock Brake System (ABS)

 P. 524

Supplemental 
Restraint System 
Indicator

●

Comes on for a few seconds 
when you set the power mode to 
ON, then goes off.

●

Comes on if a problem with any 
of the following is detected:

-

Supplemental restraint system

-

Side airbag system

-

Side curtain airbag system

-

Seat belt tensioner

●

Stays on constantly or does not come on 
at all

 - Have your vehicle checked by a dealer.

Auto High-Beam 
Indicator

●

Comes on when all the operating 
conditions of the Auto high-
beam are met.

2

Auto High-Beam

 P. 179

—

94

uu

Indicators

u

In

strum

ent Pa

nel

Indicator

Name

On/Blinking

Explanation

Message

Vehicle Stability 
Assist

TM

 (VSA

®

) 

System Indicator

●

Comes on for a few seconds 
when you set the power mode to 
ON, then goes off.

●

Blinks when VSA

®

 is active.

●

Comes on if there is a problem 
with the VSA

®

.

●

Stays on constantly

 - Have your vehicle 

checked by a dealer.

2

Vehicle Stability Assist

TM

 (VSA

®

), aka 

Electronic Stability Control (ESC), System

 

P. 506

Vehicle Stability 
Assist

TM

 (VSA

®

) 

OFF Indicator

●

Comes on for a few seconds 
when you set the power mode to 
ON, then goes off.

●

Comes on when you partially 
disable VSA

®

.

2

VSA

®

 On and Off

 P. 507

—