|
|
Window Antenna Wire Test 1. Wrap aluminum foil around the tip of the tester probe as shown. ALUMINUM FOIL TESTER PROBE 2. Touch one tester probe to the window antenna terminal, and move the other tester probe along the WINDOW ANTENNA Window Antenna Wire Repair NOTE: To make an effective repair, the broken section 1. Lightly rub the area around the broken section with fine steel wool, then clean it with alcohol. 2. Carefully mask above and below the broken portion of the window antenna wire with cellophane tape. 4. Check for continuity in the repaired wire. 5. Apply a second coat of paint in the same way. Let it dry 3 hours before removing the tape. PAINT 3. Using a small brush, apply a heavy coat of silver conductive paint extending about 1/8" on both sides NOTE: Thoroughly mix the paint before use. BROKEN WIRE CELLOPHANE OPEN Main Menu Table of Contents |