|
|
|
содержание .. 51 52 53 54 ..
2001 > 1.8L DOHC >
INSPECTION 1. Be sure the vehicle is on level ground. 2. Warm up the engine to normal operating temperature and stop it. 3. Wait for 5 minutes. 4. Remove the oil level gauge and check the oil level and condition. 5. Add or replace oil if necessary. REPLACEMENT BE CAREFUL WHEN DRAINING BECAUSE OIL IS HOT AND COULD CAUSE PERSONAL INJURY. 1. Warm engine to normal operating temperature and turn engine off. Position a suitable container under oil pan. 2. Remove oil filler cap and oil pan drain plug. 3. Allow oil to be fully drained. 4. Install drain plug with new gasket. Tightening torque : 22~30lb-ft (29~41N·m, 3.0~4.2kg-m) 5. Refill engine with specified type and amount of engine oil. 6. Install oil filler cap. 7. Run engine and check for leaks. |