Vauxhall Zafira (2016 year). Manual - part 13

 

  Index      Vauxhall     Vauxhall Zafira (2016 year) - manual in english

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

Content      ..     11      12      13      14     ..

 

 

Vauxhall Zafira (2016 year). Manual - part 13

 

 

-------------------------------------------------------------------------------------------------------------------------------------------------------------

209
Driving and operating
Fuel
Caution
Caution
Fuel for petrol engines
Use of fuel that does not comply to
Use of fuel that does not comply to
Only use unleaded fuel that complies
EN 228 or E DIN 51626-1 or
EN 590 or similar can lead to
with European standard EN 228 or
equivalent can lead to deposits or
engine powerloss, increased wear
E DIN 51626-1 or equivalent.
engine damage and may affect
or engine damage and may affect
your warranty.
your warranty.
The engine is capable of running with
fuel that contains up to 10% ethanol
Do not use marine diesel oils, heating
(e.g. named E10).
Caution
oils, Aquazole and similar diesel-
Use fuel with the recommended
water emulsions. Diesel fuels must
octane rating. The engine specific
Use of fuel with too low an octane
not be diluted with fuels for petrol
requirements are given in the engine
rating could lead to uncontrolled
engines.
data overview 3 277. A country
combustion and engine damage.
specific label at the fuel filler flap can
Fuel for natural gas
supersede the requirement.
Fuel for diesel engines
operation
Only use diesel fuel that complies
Caution
with EN 590.
Use natural gas with a methane
content of approx. 78 - 99%. L-gas
In countries outside the European
Do not use fuel or fuel additives
(low) has approx. 78 - 87% and H-gas
Union use Euro-Diesel fuel with a
that contain metallic compounds
(high) has approx. 87 - 99%. Biogas
sulphur concentration below 50 ppm.
such as manganese-based
with the same methane content can
additives. This may cause engine
also be used if it has been chemically
damage.
prepared and desulphurised.
Only use natural gas or biogas that
complies with DIN 51624.
Liquid gas or LPG must not be used.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

210
Driving and operating
Fuel selector
As soon as the natural gas tank is
necessary to maintain fuel quality as
empty, petrol operation is
well as system function necessary for
automatically engaged until the
petrol operation.
ignition is switched off.
Fill the tank completely at regular
If the natural gas tank is not refuelled,
intervals to prevent corrosion in the
the system must be manually
tank.
switched to petrol operation before
the engine is restarted. This will
Fuel for liquid gas operation
prevent damage to the catalytic
converter (overheating caused by
Liquid gas is known as LPG
irregular fuel supply).
(Liquefied Petroleum Gas) or under
its French name GPL (Gaz de Pétrole
If the selector switch is operated
Liquéfié). LPG is also known as
several times within a short time, a
Autogas.
switchover inhibitor is activated. The
Pressing Y switches between petrol
LPG consists mainly of propane and
engine remains in the current
and natural gas operation. Switching
butane. The octane rating is between
operating mode. The inhibitor
is not possible at high loads (e.g.
105 and 115, depending on the
remains active until the ignition is
powerful acceleration, driving at full
butane proportion. LPG is stored as a
switched off.
throttle). The LED status shows the
liquid at a pressure of approximately
A slight loss of power and torque can
current operating mode.
five to ten bar.
be expected during petrol operation.
1 off
: natural gas
The boiling point depends on the
You must therefore adapt your driving
operation
pressure and the mixing ratio. At
style (e.g. during overtaking
1 illumi-
: petrol operation
ambient pressure, it is between
manoeuvres) and high vehicle loads
nates
-42 °C (pure propane) and -0.5 °C
(e.g. towing loads) accordingly.
1 flashes
: no switching is
(pure butane).
Every six months run the petrol tank
possible, one type of
down until control indicator Y
fuel is empty
illuminates, then refuel. This is

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and operating
211
speed) have been reached. The
As soon as the liquid gas tank is
Caution
requirements are usually fulfilled after
empty, petrol operation is
approximately 60 seconds
automatically engaged until the
The system works at an ambient
(depending on exterior temperature)
ignition is switched off.
temperature of approx. -8 °C to
and the first firm press on the
When switching automatically
100 °C.
accelerator. The status LED shows
between petrol or gas operation, a
the current operating mode.
brief delay of engine tractive power
Full functioning of the LPG system
1 off
:
petrol operation
may be noticeable.
can only be guaranteed with liquid
1 flashes
:
checking conditions
gas which complies with the minimum
Every six months, run the petrol tank
for fuel transition to
requirements of DIN EN 589.
down until control indicator
I
liquid gas operation.
illuminates, then refuel. This helps
Fuel selector
Illuminates if
maintain fuel quality and system
conditions are fulfilled.
function for petrol operation.
1 illumi-
:
liquid gas operation
Fill the tank completely at regular
nates
intervals to prevent corrosion in the
1 flashes 5
:
liquid gas tank is
tank.
times and
empty or failure in
extin-
liquid gas system. A
Faults and remedies
guishes
message is displayed
If gas mode is not possible, check the
in the Driver
following:
Information Centre.
● Is there enough liquid gas
If the fuel tank is empty, the engine
present?
will not start.
● Is there enough petrol present for
The selected fuel mode is stored and
starting?
reactivated at the next ignition cycle if
Pressing LPG switches between
conditions allow.
petrol and liquid gas operation as
soon as the required parameters
(coolant temperature, gas
temperature and minimum engine

-------------------------------------------------------------------------------------------------------------------------------------------------------------

212
Driving and operating
Due to extreme temperatures in
Refuelling
9 Warning
combination with the gas
composition, it may take slightly
If you smell gas in the vehicle or in
longer before the system switches
the immediate vicinity, switch to
from petrol to gas mode.
petrol mode immediately. No
In extreme situations, the system may
smoking. No naked flames or
also switch back to petrol mode if the
ignition sources.
minimum requirements are not
fulfilled. If conditions allow, it may be
If the gas odour persists, do not start
possible to manually switch back to
the engine. Have the cause of the
liquid gas operation.
fault remedied by a workshop.
Seek the assistance of a workshop in
When using underground car parks,
the event of all other faults.
follow the instructions of the operator
and local laws.
Caution
9 Danger
Notice
In the event of an accident, switch off
Repairs and adjustments may only
Before refuelling, switch off
the ignition and lights.
be made by trained specialists in
ignition and any external heaters
order to maintain the safety and
with combustion chambers.
warranty on the LPG system.
Switch off any mobile phones.
Follow the operating and safety
Liquid gas is given a particular odour
instructions of the filling station
(odorised) so that any leaks can be
when refuelling.
detected easily.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and operating
213
9 Danger
Fuel is flammable and explosive.
No smoking. No naked flames or
sparks.
If you can smell fuel in your
vehicle, have the cause of this
remedied immediately by a
workshop.
Caution
The fuel filler flap can only be opened
The fuel filler cap can be retained in
In case of misfuelling, do not
if the vehicle is unlocked. Release the
the bracket on the fuel filler flap.
switch on ignition.
fuel filler flap by pushing the flap.
To refuel, fully insert the pump nozzle
and switch it on.
Fuel filler flap is located at right rear
Petrol and Diesel refuelling
After the automatic cut-off, the tank
side of the vehicle.
To open, turn the cap slowly
can be topped up by operating the
anticlockwise.
pump nozzle a maximum of two more
times.
Caution
Wipe off any overflowing fuel
immediately.
To close, turn the fuel filler cap
clockwise until it clicks.
Close the flap and allow it to engage.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

214
Driving and operating
Vehicles with misfuel inhibitor
The misfuel inhibitor ensures that the
The funnel is located on the right-
flap of the fuel filler neck can only be
hand side storage compartment in the
9 Warning
opened by using a nozzle for diesel
load compartment.
fuel or a funnel for emergency
Place the funnel in a straight line to
Do not try to open the flap of the
refilling.
the filler neck and press with slight
fuel filler neck manually on
Turn the fuel filler cap slowly
force to insert.
vehicles with misfuel inhibitor.
anticlockwise.
Use the funnel to fill the diesel fuel into
Disregarding this could lead to
The cap can be retained in the
the filler neck.
trapping of the fingers.
bracket on the fuel filler flap.
After topping-up, put the funnel into
Place the nozzle in a straight line to
the plastic bag and stow it in the
Vehicles with a selective catalytic
the filler neck and press with slight
storage compartment.
reduction system are equipped with a
force to insert.
misfuel inhibitor.
Selective catalytic reduction system
In case of an emergency, refill with a
3 166.
canister. A funnel must be used to
open the cap of the filler neck.
Natural gas refuelling

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and operating
215
The fuel filler flap can only be opened
German Erdgasfahrzeuge
if the vehicle is unlocked. Release the
fuel filler flap by pushing the flap.
English NGVs = Natural Gas Vehi-
cles
9 Warning
French Véhicules au gaz naturel -
or - Véhicules GNV
Refuel only with a maximum
output pressure of 250 bar. Use
Italian
Metano auto
only temperature-compensated
filling stations.
Terms for "natural gas" abroad:
German Erdgas
The refuelling procedure must be
completed, i.e. the filler neck must be
English CNG = Compressed
Unscrew protective cap from the filler
vented.
Natural Gas
neck.
The capacity of the natural gas tank
French GNV = Gaz Naturel (pour)
depends on outside temperature,
Véhicules - or -
filling pressure and type of refuelling
CGN = carburantgaz
system. Capacities 3 286.
naturel
Close the flap and allow it to engage.
Italian
Metano (per auto)
Terms for "natural gas vehicles"
abroad:
Liquid gas refuelling
Follow the operating and safety
instructions of the filling station when
refuelling.
The filling valve for the liquid gas is
behind the fuel filler cap.
Screw the required adapter hand-
tight onto the filler neck.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

216
Driving and operating
Press the button at the liquid gas
The multivalve on the liquid gas tank
supply point. The filling system stops
automatically limits the fill quantity. If
or begins to run slowly when 80% of
a larger quantity is added, we
the tank volume is reached
recommend not exposing the vehicle
(maximum fill level).
to the sun until the excess amount
has been used up.
Release button on filling system to
stop the filling process. Release the
Filling adapter
locking lever and remove the filler
As filling systems are not
nozzle. A small quantity of liquid gas
standardised, different adapters are
may escape.
required which are available from
Remove adapter and stow in vehicle.
Vauxhall Distributors and from
Fit protective cap to prevent the
Vauxhall Authorised Repairers.
ACME Adapter: Screw the nut of the
penetration of foreign bodies into the
filling nozzle onto the adapter. Press
filler opening and the system.
locking lever on filler nozzle down.
DISH filler neck: Place the filler nozzle
9 Warning
into the adapter. Press locking lever
on filler nozzle down.
Due to the system design, an
Bayonet filler neck: Place filler nozzle
escape of liquid gas after
on the adapter and turn clockwise or
releasing the locking lever is
anticlockwise through one quarter
unavoidable. Avoid inhaling.
turn. Pull locking lever of filler nozzle
fully.
9 Warning
EURO filler neck: Press the filler
nozzle onto the adapter until it
The liquid gas tank should only be
ACME adapter: Belgium, Germany,
engages.
filled to 80% capacity, for safety
Ireland, Luxembourg, Switzerland
reasons.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and operating
217
Fuel consumption - CO2-
Emissions
Petrol and Diesel engines
The fuel consumption (combined) of
the model Vauxhall Zafira is within a
range of 31 to 69 mpg.
The CO2 emission (combined) is
within a range of 177 to 109 g/km.
For the values specific to your
vehicle, refer to the EEC Certificate of
Bayonet adapter: Netherlands,
DISH adapter: Austria, Bosnia-
Conformity provided with your vehicle
Norway, Spain, United Kingdom
Herzegovina, Bulgaria, Croatia,
or other national registration
Czech Republic, Denmark, Estonia,
documents.
France, Greece, Hungary, Italy,
Latvia, Lithuania, Macedonia,
Natural gas engines
Poland, Portugal, Romania, Serbia,
The gas consumption (combined) of
Slovakia, Slovenia, Sweden,
the model Vauxhall Zafira is approx.
Switzerland, Turkey, Ukraine,
40 mpg.
Fuel filler cap
The CO2 emission (combined) is
Only use genuine fuel filler caps.
129 g/km.
Diesel-engined vehicles have special
For the values specific to your
fuel filler caps.
vehicle, refer to the EEC Certificate of
Conformity provided with your vehicle
or other national registration
EURO adapter: Spain
documents.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

218
Driving and operating
General information
Natural gas
Trailer hitch
The fuel consumption information
The official fuel consumption and
was obtained using reference fuel
specific CO2 emission figures quoted
General information
G20 (methane proportion
relate to the EU base model with
Only use towing equipment that has
99 - 100 mol%) under prescribed
standard equipment.
been approved for your vehicle.
driving conditions. When using
Vehicles with natural gas engines
Fuel consumption data and CO2
natural gas with a lower proportion of
require special towing equipment.
emission data are determined
methane, the fuel consumption can
according to regulation
differ from the specified values.
Entrust retrofitting of towing
R (EC) No. 715/2007 (in the version
equipment to a workshop. It may be
respectively applicable), taking into
necessary to make changes that
consideration the vehicle weight in
affect the cooling system, heat
running order, as specified by the
shields or other equipment.
regulation.
The bulb outage detection function for
The figures are provided only for the
trailer brake light cannot detect a
purpose of comparison between
partial bulb outage. E.g. in case of
different vehicle variants and must
4x 5 Watt bulbs, the function only
not be taken as a guarantee for the
detects lamp outage when only a
actual fuel consumption of a
single 5 Watt lamp remains or none
particular vehicle. Additional
remain.
equipment may result in slightly
Fitting of towing equipment could
higher results than the stated
cover the opening of the towing eye.
consumption and CO2 figures.
If this is the case use the coupling ball
Furthermore, fuel consumption is
bar for towing. Always keep the
dependent on personal driving style
coupling ball bar in the vehicle.
as well as road and traffic conditions.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and operating
219
The permissible gross train weight
Driving characteristics and
Trailer towing
must not be exceeded. This weight is
towing tips
Trailer loads
specified on the identification plate
Before attaching a trailer, lubricate
3 272.
the coupling ball. However, do not do
The permissible trailer loads are
so if a stabiliser, which acts on the
vehicle and engine-dependent
Vertical coupling load
coupling ball, is being used to reduce
maximum values which must not be
The vertical coupling load is the load
snaking movements.
exceeded. The actual trailer load is
exerted by the trailer on the coupling
the difference between the actual
For trailers with low driving stability
ball. It can be varied by changing the
gross weight of the trailer and the
and caravan trailers with a permitted
weight distribution when loading the
actual coupling socket load with the
gross vehicle weight of more than
trailer.
trailer coupled.
1300 kg the use of a stabiliser is
The maximum permissible vertical
strongly recommended when driving
The permissible trailer loads are
coupling load (75 kg) is specified on
above 50 mph.
specified in the vehicle documents. In
the towing equipment identification
general, they are valid for gradients
If the trailer starts snaking, drive more
plate and in the vehicle documents.
up to max. 12%.
slowly, do not attempt to correct the
The permitted trailer load applies up
Notice
steering and brake sharply if
to the specified incline and up to an
Engines B16DTH, B16DTJ,
necessary.
altitude of 1000 metres above sea
B20DTH and B20DTJ: Depending
When driving downhill, drive in the
level. Since engine power decreases
on the equipment the maximum
same gear as if driving uphill and
as altitude increases due to the air
permissible vertical coupling load
drive at a similar speed.
becoming thinner, therefore reducing
can be 75 kg or 60 kg.
Adjust tyre pressure to the value
climbing ability, the permissible gross
Always aim for the maximum load,
specified for full load 3 288.
train weight also decreases by 10%
especially in the case of heavy
for every 1000 metres of additional
trailers. The vertical coupling load
altitude. The gross train weight does
should never fall below 25 kg.
not have to be reduced when driving
on roads with slight inclines (less than
8%, e.g. motorways).

-------------------------------------------------------------------------------------------------------------------------------------------------------------

220
Driving and operating
Rear axle load
Stowage of coupling ball bar
Fitting the coupling ball bar
When the trailer is coupled and the
towing vehicle fully loaded, the
permissible rear axle load (see
identification plate or vehicle
documents) may be exceeded by
60 kg, the gross vehicle weight rating
may be exceeded by 60 kg. If the
permissible rear axle load is
exceeded, a maximum speed of
60 mph applies.
Towing equipment
The bag with the coupling ball bar is
Disengage and fold down the socket.
Caution
stowed in the load compartment.
Remove the sealing plug from the
opening for the coupling ball bar and
Place the strap through the right rear
When operating without a trailer,
stow it.
lashing eye, wrap around twice and
remove the coupling ball bar.
tighten the strap to secure the bag.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and operating
221
Checking the tensioning of the
Insert the tensioned coupling ball bar
coupling ball bar
in the opening and push firmly
upwards until it audibly engages.
The rotary handle snaps back into its
original position resting against the
coupling ball bar without a gap.
9 Warning
Do not touch rotary handle during
insertion.
● Pull out rotary knob and turn
Lock the coupling ball bar by turning
clockwise as far as it will go.
the key to position e. Remove the key
and close the protective flap.
● Red marking on rotary knob must
Inserting the coupling ball bar
point towards green marking on
Eye for break-away stopping cable
coupling ball bar.
● The gap between the rotary knob
and the coupling ball bar must be
approx. 6 mm.
● The key must be in position c.
Otherwise, the coupling ball bar must
be tensioned before being inserted:
● Unlock coupling ball bar by
turning key to position c.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

222
Driving and operating
Attach breakaway stopping cable to
Dismounting the coupling ball bar
selectively braked until the snaking
eye.
ceases. While system is working keep
steering wheel as still as possible.
Check that the coupling ball bar is
Trailer stability assist (TSA) is a
correctly installed
function of the Electronic Stability
● Green marking on rotary knob
Control 3 176.
must point towards green
marking on coupling ball bar.
● There must be no gap between
the rotary handle and the
coupling ball bar.
● The coupling ball bar must be
firmly engaged in the opening.
● The coupling ball bar must be
Open the protective flap and turn the
locked and the key removed.
key to position c to unlock the
coupling ball bar.
9 Warning
Pull out rotary handle and turn
clockwise as far as it will go. Pull out
Towing a trailer is permitted only
coupling ball bar downwards.
when a coupling ball bar is fitted
correctly. If the coupling ball bar
Insert sealing plug in opening. Fold
does not engage correctly, seek
away socket.
the assistance of a workshop.
Trailer stability assist
If the system detects snaking
movements, engine power is reduced
and the vehicle/trailer combination is

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Vehicle care
223
Interior lights
239
Appearance care
265
Vehicle care
Instrument panel illumination ... 240
Exterior care
265
Electrical system
240
Interior care
267
Fuses
240
General Information
224
Engine compartment fuse box . 241
Accessories and vehicle
Instrument panel fuse box
243
modifications
224
Load compartment fuse box
244
Vehicle storage
224
Vehicle tools
246
End-of-life vehicle recovery
224
Tools
246
Vehicle checks
225
Wheels and tyres
247
Performing work
225
Winter tyres
247
Bonnet
225
Tyre designations
247
Engine oil
226
Tyre pressure
247
Engine coolant
227
Tyre pressure monitoring
Power steering fluid
228
system
248
Washer fluid
229
Tread depth
251
Brakes
229
Changing tyre and wheel size . 252
Brake fluid
229
Wheel covers
252
Vehicle battery
229
Tyre chains
253
Diesel fuel system bleeding
231
Tyre repair kit
253
Wiper blade replacement
231
Wheel changing
256
Bulb replacement
232
Spare wheel
258
Halogen headlights
232
Jump starting
262
Adaptive forward lighting
234
Towing
263
Fog lights
235
Towing the vehicle
263
Tail lights
236
Towing another vehicle
264
Side turn signal lights
238
Number plate light
239

-------------------------------------------------------------------------------------------------------------------------------------------------------------

224
Vehicle care
● Open the bonnet, close all doors
General Information
Vehicle storage
and lock the vehicle.
Storage for a long period of time
● Disconnect the clamp from the
Accessories and vehicle
negative terminal of the vehicle
modifications
If the vehicle is to be stored for several
battery. Beware that all systems
months:
We recommend the use of genuine
are not functional, e.g. anti-theft
parts and accessories and factory
Wash and wax the vehicle.
alarm system.
approved parts specific for your
Have the wax in the engine
vehicle type. We cannot assess or
compartment and underbody
Putting back into operation
guarantee reliability of other products
checked.
When the vehicle is to be put back into
- even if they have a regulatory or
Clean and preserve the rubber
operation:
otherwise granted approval.
seals.
● Connect the clamp to the
Do not make any modifications to the
Fill up fuel tank completely.
negative terminal of the vehicle
electrical system, e.g. changes of
Change the engine oil.
battery. Activate the electronics
electronic control units (chip tuning).
of the power windows.
Drain the washer fluid reservoir.
Caution
● Check tyre pressure.
Check the coolant antifreeze and
corrosion protection.
● Fill up the washer fluid reservoir.
When transporting the vehicle on
Adjust tyre pressure to the value
● Check the engine oil level.
a train or on a recovery vehicle, the
specified for full load.
● Check the coolant level.
mud flaps might be damaged.
Park the vehicle in a dry, well
● Fit the number plate if necessary.
ventilated place. Engage first or
reverse gear or set selector lever
End-of-life vehicle recovery
to P. Prevent the vehicle from
rolling.
Information on end-of-life vehicle
recovery centres and the recycling of
Do not apply the parking brake.
end-of-life vehicles is available on our

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Vehicle care
225
website, where legally required. Only
Vehicle checks
9 Danger
entrust this work to an authorised
recycling centre.
Performing work
The ignition system and Xenon
Gas vehicles must be recycled by a
headlights use extremely high
service centre authorised for gas
voltage. Do not touch.
vehicles.
Bonnet
Opening
9 Warning
Only perform engine compartment
checks when the ignition is off.
The cooling fan may start
operating even if the ignition is off.
Pull the release lever and return it to
its original position.

 

 

 

 

 

 

 

Content      ..     11      12      13      14     ..