Vauxhall Zafira (2016 year). Manual - part 11

 

  Index      Vauxhall     Vauxhall Zafira (2016 year) - manual in english

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

Content      ..     9      10      11      12     ..

 

 

Vauxhall Zafira (2016 year). Manual - part 11

 

 

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and operating
175
brake automatically. This is not
Apply electric parking brake: pull and
Hill start assist
possible when the switch m is pulled
hold switch m for more than five
The system helps prevent unintended
at the same time.
seconds. If control indicator m
movement when driving away on
Vehicles with automatic transmission:
illuminates, electric parking brake is
inclines.
Engaging D and then depressing the
applied.
When releasing the foot brake after
accelerator pedal releases the
Release electric parking brake: press
stopping on an incline, the brakes
electric parking brake automatically.
and hold switch m for more than two
remain on for a further two seconds.
This is not possible when the switch
seconds. If control indicator m
The brakes release automatically as
m is pulled at the same time.
extinguishes, electric parking brake is
soon as the vehicle begins to
released.
accelerate.
Dynamic braking when vehicle is
Control indicator m flashes: electric
moving
The hill start assist is not active during
parking brake is not fully applied or
When the vehicle is moving and the
an Autostop.
released. When continuously
switch m is kept pulled, the electric
flashing, release electric parking
parking brake system will decelerate
brake and retry applying.
the vehicle, but will not apply
statically.
Brake assist
As soon as the switch m is released,
dynamic braking will be stopped.
If the brake pedal is depressed
quickly and forcefully, maximum
Fault
brake force is automatically applied
Failure mode of electric parking brake
(full braking).
is indicated by control indicator j and
Maintain steady pressure on the
by a code number or a vehicle
brake pedal for as long as full braking
message which is displayed in the
is required. Maximum brake force is
Driver Information Centre. Vehicle
automatically reduced when the
messages 3 122.
brake pedal is released.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

176
Driving and operating
TC is reactivated by pressing b
Ride control systems
9 Warning
again.
Traction Control system
Do not let this special safety
TC is also reactivated the next time
the ignition is switched on.
The Traction Control system (TC) is a
feature tempt you into taking risks
component of the Electronic Stability
when driving.
Control.
Adapt speed to the road
Electronic Stability Control
TC improves driving stability when
conditions.
Electronic Stability Control (ESC)
necessary, regardless of the type of
improves driving stability when
road surface or tyre grip, by
Control indicator b 3 113.
necessary, regardless of the type of
preventing the drive wheels from
road surface or tyre grip. It also
Deactivation
spinning.
prevents the drive wheels from
As soon as the drive wheels starts to
spinning.
spin, engine output is reduced and
As soon as the vehicle starts to
the wheel spinning the most is braked
swerve (understeer/oversteer),
individually. This considerably
engine output is reduced and the
improves the driving stability of the
wheels are braked individually. This
vehicle on slippery road surfaces.
considerably improves the driving
TC is operational as soon as the
stability of the vehicle on slippery road
control indicator b extinguishes.
surfaces.
ESC is operational as soon as the
When TC is active b flashes.
control indicator b extinguishes.
When ESC is active b flashes.
TC can be switched off when spinning
of drive wheels is required: press b
briefly.
Control indicator k illuminates.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and operating
177
ESC is reactivated by pressing b
In each driving mode Flex Ride
9 Warning
again. If the TC system was
networks the following electronic
previously disabled, both TC and
systems:
Do not let this special safety
ESC are reactivated.
● Continuous Damping Control
feature tempt you into taking risks
ESC is also reactivated the next time
when driving.
● Accelerator Pedal Control
the ignition is switched on.
Adapt speed to the road
● Steering Control
conditions.
● Automatic transmission
Interactive driving system
Control indicator b 3 113.
SPORT mode
Flex Ride
Deactivation
Flex Ride driving system allows the
driver to select between three driving
modes:
● SPORT mode: press SPORT,
LED illuminates.
● TOUR mode: press TOUR, LED
illuminates.
● Normal mode: neither SPORT or
TOUR are pressed, no LED
illuminates.
Deactivate SPORT mode and TOUR
mode by pressing the corresponding
button once more.
For very high-performance driving,
ESC can be deactivated: press and
hold b for approx. five seconds.
Control indicator n illuminates.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

178
Driving and operating
The settings of the systems are
The settings of the systems are
selected driving mode or, when
adapted to a sportier driving style:
adapted to a comfort driving style:
recognising greater variations, the
driving mode is changed for the
● Damping of shock absorbers
● Damping of shock absorbers
length of variation.
reacts more stiffly to provide
reacts more softly.
better contact with the road
If, for example, Normal mode is
● Accelerator pedal reacts with
surface.
selected and DMC detects a sporty
standard settings.
driving behaviour, DMC changes
● The engine reacts more quickly
● Steering support is in standard
several settings of the Normal mode
to the accelerator pedal.
mode.
into sporty settings. The DMC
● Steering support is reduced.
● Shift points of automatic
changes to SPORT mode in case of
● Shift points of automatic
transmission occur in a comfort
very sporty driving behaviour.
transmission occur later.
mode.
If, for example, TOUR mode is
● With SPORT mode activated, the
● Illumination of main instruments
selected and whilst driving on a
illumination of main instruments
is white.
winding road a sudden hard brake is
changes from white to red.
necessary, DMC will detect the
Normal mode
dynamic vehicle condition and
TOUR mode
All settings of the systems are
changes the settings for suspension
adapted to standard values.
to SPORT mode to increase vehicle
stability.
Drive mode control
When the driving characteristic or the
Within each manual selected driving
dynamic vehicle state returns to
mode SPORT, TOUR or Normal, the
former state, DMC will change the
Drive Mode Control (DMC) detects
settings to the preselected driving
and analyses continuously the real
mode.
driving characteristics, responses by
the driver, and the active dynamic
state of the vehicle. If necessary, the
control unit of DMC automatically
changes the settings within the

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and operating
179
Personalised settings in the Sport
Driver assistance
mode
systems
The driver can select the functions of
the SPORT mode when SPORT is
pressed. These settings can be
9 Warning
changed in the Settings menu in the
Info-Display. Vehicle personalisation
Driver assistance systems are
3 129.
developed to support the driver
and not to replace the driver's
attention.
The driver accepts full
responsibility when driving the
Do not use the cruise control if it is not
vehicle.
advisable to maintain a constant
When using driver assistance
speed.
systems, always take care
With automatic transmission, only
regarding the current traffic
activate cruise control in automatic
situation.
mode.
Control indicator m 3 116.
Cruise control
The cruise control can store and
Switching on
maintain speeds of approx. 20 to
Press m, control indicator m in
120 mph. Deviations from the stored
speeds may occur when driving uphill
instrument cluster illuminates white.
or downhill.
Activation
For safety reasons, the cruise control
cannot be activated until the foot
Accelerate to the desired speed and
brake has been operated once.
turn thumb wheel to SET/-, the
Activation in first gear is not possible.
current speed is stored and

-------------------------------------------------------------------------------------------------------------------------------------------------------------

180
Driving and operating
maintained. Control indicator m in
Deactivation
Switching off
instrument cluster illuminates green.
Press y, control indicator m in
Press m, control indicator m in
Accelerator pedal can be released.
instrument cluster illuminates white.
instrument cluster extinguishes. The
Vehicle speed can be increased by
Cruise control is deactivated. Last
stored speed is deleted.
depressing the accelerator pedal.
stored speed remains in memory for
Pressing L for activating speed
When the accelerator pedal is
later speed resume.
limiter or switching off the ignition also
released, the previously stored speed
Automatic deactivation:
switches off cruise control and
is resumed.
deletes the stored speed.
Vehicle speed is below approx.
Cruise control remains activated
20 mph.
while gearshifting.
Vehicle speed is above approx.
Speed limiter
Increase speed
125 mph.
The speed limiter prevents the
With cruise control active, hold thumb
The brake pedal is depressed.
vehicle exceeding a preset maximum
wheel turned to RES/+ or briefly turn
speed.
The clutch pedal is depressed for
to RES/+ repeatedly: speed
a few seconds.
The maximum speed can be set at a
increases continuously or in small
speed above 15 mph.
Selector lever is in N.
increments.
The driver can only accelerate up to
Engine speed is in a very low
Alternatively accelerate to the desired
the preset speed. Deviations from the
range.
speed and store by turning to SET/-.
limited speed may occur when driving
The Traction Control system or
downhill.
Reduce speed
Electronic Stability Control is
The preset speed limit is displayed in
operating.
With cruise control active, hold thumb
the top line of the Driver Information
wheel turned to SET/- or briefly turn to
Resume stored speed
Centre when the system is active.
SET/- repeatedly: speed decreases
continuously or in small increments.
Turn thumb wheel to RES/+ at a
speed above 20 mph. The stored
speed will be obtained.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and operating
181
Activation
maximum speed. Speed limit is
The limited speed will flash in the
displayed in the Driver Information
Driver Information Centre and a
Centre.
chime sounds during this period.
Release the accelerator pedal and
the speed limiter function is
reactivated once a speed lower than
the limit speed is obtained.
Deactivation
Press y: speed limiter is deactivated
and the vehicle can be driven without
speed limit.
The limited speed is stored and a
corresponding message appears in
Press L. If cruise control or adaptive
the Driver Information Centre.
cruise control has been activated
before, it is switched off when speed
Change speed limit
Resume limit speed
limiter is activated and the control
With speed limiter active, turn thumb
indicator m extinguishes.
Turn thumb wheel to RES/+. The
wheel to RES/+ to increase or SET/-
stored speed limit will be obtained.
Set speed limit
to decrease the desired maximum
speed.
Switching off
With speed limiter active, hold thumb
wheel turned to RES/+ or briefly turn
Exceeding the speed limit
Press L, the speed limit indication in
to RES/+ repeatedly until the desired
the Driver Information Centre
In the event of an emergency it is
maximum speed is displayed in the
extinguishes. The stored speed is
possible to exceed the speed limit by
Driver Information Centre.
deleted.
depressing the accelerator pedal
Alternatively accelerate to the desired
firmly beyond the point of resistance.
speed and briefly turn thumb wheel to
SET/-: the current speed is stored as

-------------------------------------------------------------------------------------------------------------------------------------------------------------

182
Driving and operating
By pressing m to activate cruise
9 Warning
control or adaptive cruise control or
by switching off the ignition, speed
The complete driver attention is
limiter is also deactivated and the
always required while driving with
stored speed is deleted.
adaptive cruise control. The driver
stays fully in control of the vehicle
Adaptive cruise control
Adaptive cruise control uses a radar
because the brake pedal, the
Adaptive cruise control is an
sensor to detect the vehicles ahead.
accelerator pedal and the cancel
enhancement to traditional cruise
If no vehicle is detected in the driving
switch have priority over any
control with the additional feature of
path, the adaptive cruise control will
adaptive cruise control operation.
maintaining a certain distance behind
behave like a traditional cruise
the vehicle ahead.
control.
Switching on
Adaptive cruise control automatically
For safety reasons, the system
decelerates the vehicle when
cannot be activated before the brake
approaching a slower moving vehicle.
pedal has been depressed once after
It then adjusts the vehicle speed to
switching on ignition. Activation in first
follow the vehicle ahead at the
gear is not possible.
selected following distance. The
Adaptive cruise control is mainly
vehicle speed increases or decreases
advised to be used on long straight
to follow the vehicle in front, but will
roads, e.g. highways or country roads
not exceed the set speed. It may
with steady traffic. Do not use the
apply limited braking with activated
system if it is not advisable to
brake lights.
maintain a constant speed.
The adaptive cruise control can store
Control indicator A 3 116, m 3 116.
and maintain speeds over approx.
Press C to switch on adaptive cruise
30 mph and brakes automatically to
control. The control indicator m
follow a slower vehicle driving ahead
illuminates white.
down to a minimum speed of
18 mph.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and operating
183
Activation by setting the speed
9 Warning
Adaptive cruise control can be
activated between 30 mph and
Accelerating by the driver
112 mph.
deactivates automatic braking by
the system. This is indicated as a
Accelerate to the desired speed and
pop-up warning in the Driver
turn thumb wheel to SET/-; the
Information Centre.
current speed is stored and
maintained. Control indicator m
Increase speed
illuminates green.
With adaptive cruise control active,
hold thumb wheel turned to RES/+:
speed increases continuously in large
Overriding set speed
increments, or activate RES/+
It is always possible to drive faster
repeatedly: speed increases in small
than the selected set speed by
increments.
depressing the accelerator pedal.
With adaptive cruise control active, if
When the accelerator pedal is
the vehicle is driven much faster than
released, the vehicle returns to the
the desired speed, e.g. after
desired distance if a slower vehicle is
depressing the accelerator pedal,
ahead. Otherwise it returns to the
then the current speed can be stored
stored speed.
and maintained by turning the thumb
Once the system is activated,
wheel to SET/-.
The adaptive cruise control symbol,
adaptive cruise control decelerates or
the following distance setting and set
Reduce speed
brakes if it detects a vehicle ahead
speed are indicated in the top line of
which is slower or closer than the
the Driver Information Centre.
With adaptive cruise control active,
desired following distance.
hold thumb wheel turned to SET/-:
The accelerator pedal can be
speed decreases continuously in
released. Adaptive cruise control
remains activated while gearshifting.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

184
Driving and operating
large increments, or activate SET/-
repeatedly: speed decreases in small
increments.
With adaptive cruise control active, if
the vehicle is driven much slower than
the desired speed, e.g. because of a
slower vehicle ahead, then the
current speed can be stored and
maintained by turning the thumb
wheel to SET/-.
Resume stored speed
If the system is switched on but
Press E, the current setting is shown
The selected following distance is
inactive, then turn thumb wheel to
on the Driver Information Centre.
indicated by filled distance bars on
RES/+ at a speed above 30 mph to
Press E again to change the
the adaptive cruise control page.
resume the stored speed.
following distance. The setting is also
Note that the following distance
displayed in the top line of the Driver
setting is shared with the sensitivity
Setting the following distance
Information Centre.
setting of forward collision alert.
When adaptive cruise control detects
Example: If setting 3 (far) is selected,
a slower moving vehicle in the driving
then the driver is warned sooner
path, it will adjust the vehicle speed to
before a possible collision, also if
maintain the following distance
adaptive cruise control is inactive or
selected by the driver.
switched off.
The following distance can be set to
near, medium or far.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and operating
185
The green illuminated "vehicle
● Electronic Stability Control is
9 Warning
ahead" control indicator A is
operating.
displayed in the speedometer when
● There is no traffic and nothing
The driver accepts full
the system detects a vehicle in the
detected on the road sides for
responsibility for the appropriate
driving path.
several minutes. In this case
following distance based on traffic,
If this symbol does not appear, or
there are no radar echoes and
weather and visibility conditions.
appears briefly, adaptive cruise
the sensor may report that it is
Following distance must be
control will not respond to vehicles
blocked.
adjusted or the system switched
ahead.
off when required by the prevailing
● Collision imminent braking
conditions.
system is applying the brakes.
Deactivation
● Radar sensor is blocked by an ice
Detecting the vehicle ahead
Adaptive cruise control is deactivated
or water film.
by the driver when:
● A fault is detected in the radar,
y is pressed.
engine or brake system.
● Brake pedal is applied.
When adaptive cruise control is
● Clutch pedal is depressed for
deactivated automatically, the control
more than four seconds.
indicator m illuminates white and a
warning symbol is displayed as a pop-
● Gear selector lever of automatic
up in the Driver Information Centre.
transmission is moved to N.
The system is also automatically
deactivated when:
● Vehicle speed slows down below
28 mph or accelerates above
120 mph.
● Traction Control system is
operating for more than
20 seconds.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

186
Driving and operating
Driver's attention
● After a sudden lane change, the
system needs a certain time to
Use adaptive cruise control
detect the next preceding
carefully on bends or mountain
vehicle. So if a new vehicle is
roads, as it can lose the vehicle
detected, the system may
ahead and require time to detect
accelerate instead of braking.
it again.
● Adaptive cruise control does
Do not use the system on
ignore the oncoming traffic.
slippery roads as it can create
● Adaptive cruise control does not
rapid changes in tyre traction
brake for stopped vehicles,
(wheel spinning), so that you
pedestrians or animals.
could lose control.
Do not use adaptive cruise
Bends
The stored speed is maintained.
control during rain, snow or
heavy dirt, as the radar sensor
9 Warning
can be covered by a water film,
dust, ice or snow. This reduces or
When adaptive cruise control is
completely suppresses the
deactivated, the driver must take
visibility. In case of sensor
over full brake and engine control.
blockage, clean the sensor
cover.
Switching off
The adaptive cruise control calculates
a predicted path based on the
System limits
Press C to switch off adaptive cruise
centrifugal force. This predicted path
control. The control indicator m
● The system's automatic brake
considers the current bend
extinguishes. The stored speed is
force does not permit hard
characteristic, but cannot consider a
deleted.
braking and the braking level
future bend change. The system may
Switching off the ignition also
may not be sufficient to avoid a
lose the current vehicle ahead or
switches off adaptive cruise control
collision.
consider a vehicle which is not in the
and deletes the stored speed.
actual lane. This can happen when

-------------------------------------------------------------------------------------------------------------------------------------------------------------

187
Driving and operating
entering or exiting a bend or if the
cruise control may not be able to
Hill and trailer considerations
bend gets stronger or weaker. If it no
brake the vehicle in time to avoid a
longer detects any vehicle ahead,
collision with a much slower vehicle or
then control indicator A will
after a lane change. This is
extinguish.
particularly true if driving fast or if the
visibility is reduced due to weather
If the centrifugal force is too high in a
conditions.
bend, the system slows down the
vehicle slightly. This braking level is
While entering or exiting a motorway,
not designed to avoid spinning off the
adaptive cruise control may lose the
System performance on hills and
bend. The driver is responsible for
vehicle ahead and accelerate up to
when towing a trailer depends on
reducing the selected speed before
the set speed. For this reason,
vehicle speed, vehicle load, traffic
entering a bend and in general to
decrease the set speed before the
conditions and the road gradient. It
adapt the speed to the road type and
exit or before the entry.
may not detect a vehicle in your path
to existing speed limits.
while driving on hills. On steep hills,
Vehicle path changes
you may have to use the accelerator
pedal to maintain your vehicle speed.
When going downhill, especially
when towing a trailer, you may have
to brake to maintain or reduce your
speed.
Note that applying the brake
deactivates the system. It is not
Motorways
If another vehicle enters your driving
recommended to use adaptive cruise
On motorways, adapt the set speed
path, adaptive cruise control will first
control on steep hills especially when
to the situation and the weather.
consider the vehicle when it is
towing a trailer.
Always consider that adaptive cruise
completely in your path. Be ready to
control has a limited visibility range, a
take action and depress the brake
limited braking level and a certain
pedal, if you need to brake more
reaction time to verify if a vehicle is in
quickly.
the driving path or not. Adaptive

-------------------------------------------------------------------------------------------------------------------------------------------------------------

188
Driving and operating
Radar unit
Vehicle messages 3 122.
consult a workshop to verify and
correct the adaptive cruise control
sensor position.
Forward collision alert
The forward collision alert can help to
Settings
avoid or reduce the damage caused
by front-end crashes.
Settings can be changed in the Auto
collision preparation menu in the
vehicle personalisation 3 129.
Fault
If the adaptive cruise control does not
work due to temporary conditions
(e.g. blockage by ice) or if there is a
The radar unit is mounted behind the
permanent system error, then a
radiator grille below the brand
message is displayed in the Driver
emblem.
Information Centre.
9 Warning
A vehicle ahead is indicated by a
The radar unit was aligned
control indicator A.
carefully during manufacture.
Therefore, after a frontal accident,
do not use the system. The front
bumper may appear to be intact,
however the sensor behind can be
out of position and react
incorrectly. After an accident,

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and operating
189
on vehicles equipped with
adaptive cruise control 3 182.
● Forward collision alert based on
front camera system
on vehicles with traditional cruise
control or none 3 179.
Forward collision alert based on
radar system
The system uses the radar sensor
behind the radiator grille to detect a
vehicle directly ahead, in your path,
If a vehicle directly ahead is
Press E; the current setting is shown
within a distance of max. 150 metres.
approached too quickly, a warning
in the Driver Information Centre.
chime and alert in the Driver
Press E again to change the alert
Activation
Information Centre is provided.
sensitivity. The setting is also
Forward collision alert operates
A precondition is that forward collision
automatically above walking speed,
displayed in the top line of the Driver
alert is activated in the vehicle
provided that Auto collision
Information Centre.
personalisation menu 3 129 or that it
preparation setting is not deactivated
is not deactivated by pressing V
in the vehicle personalisation menu
(depending on the system, see
3 129.
following).
Selecting the alert sensitivity
Depending on the vehicle's
The alert sensitivity can be set to
equipment, there are two variants of
near, medium or far.
the forward collision alert available:
● Forward collision alert based on
radar system

-------------------------------------------------------------------------------------------------------------------------------------------------------------

190
Driving and operating
Alerting the driver
Settings
Settings can be changed in the Auto
collision preparation menu in the
vehicle personalisation 3 129.
Forward collision alert based on
front camera system
Forward collision alert uses the front
camera system in the windscreen to
detect a vehicle directly ahead, in
your path, within a distance of approx.
60 metres.
Note that the alert timing sensitivity
setting is shared with the following
Activation
A green illuminated vehicle ahead
distance setting of the adaptive cruise
control indicator A illuminates in the
Forward collision alert operates
control. So changing the alert timing
automatically above 25 mph, if it is not
instrument cluster when the system
sensitivity changes the adaptive
deactivated by pressing V, see
has detected a vehicle in the driving
cruise control following distance
path. When the distance to a
below.
setting.
preceding moving vehicle gets too
Selecting the alert sensitivity
small or when approaching another
The alert sensitivity can be set to
vehicle too rapidly and a collision is
near, medium or far.
imminent, the collision alert symbol
pops-up in the Driver Information
Centre. Simultaneously a warning
chime sounds.
Depress the brake pedal, if it is
required by the situation.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and operating
191
Alerting the driver
Deactivation
A green illuminated vehicle ahead
The system can be deactivated.
control indicator A illuminates in the
Press V repeatedly until the following
instrument cluster when the system
message appears in the Driver
has detected a vehicle in the driving
Information Centre.
path.
Press V; the current setting is shown
in the Driver Information Centre.
Press V again to change the alert
sensitivity.
General information for both
When the distance to a preceding
variants of forward collision alert
moving vehicle gets too small or when
approaching another vehicle too
9 Warning
rapidly and a collision is imminent, the
collision alert symbol pops-up in the
Forward collision alert is just a
Driver Information Centre.
warning system and does not
Simultaneously a warning chime
apply the brakes. When
sounds. Depress the brake pedal, if it
is required by the situation.

 

 

 

 

 

 

 

Content      ..     9      10      11      12     ..